sdhc not automount besides the first time.

[slchen1013]

Hi, All:

When I plug my SDHC card, remove it (both unmount and not umount first), and plug it again, gnome will not mount it automatically sometimes.

I need to rmmod mmc_block manually then it will automount again.

In the case gnome automounts, the hal-device give the folloing message:

0: udi = '/org/freedesktop/Hal/devices/volume_uuid_7C53_160D'

volume.partition.label = (string)
volume.partition.uuid = (string)
volume.partition.flags = { } (string list)
linux.hotplug_type = 3 (0x3) (int)
volume.ignore = false (bool)
storage.model = (string)
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } (string list)
org.freedesktop.Hal.Device.Volume.method_signature s = { 'ssas', 'as', 'as' } (string list)
info.product = 'Volume (vfat)' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } (string list)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7C53_160D' (string)
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } (string list)
info.category = 'volume' (string)
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush' } (string list)
info.capabilities = { 'volume', 'block' } (string list)
volume.unmount.valid_options = { 'lazy' } (string list)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_0x00011406' (string)
volume.fstype = 'vfat' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = 'FAT32' (string)
volume.uuid = '7C53-160D' (string)
volume.label = (string)
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list)
volume.mount_point = '/media/disk' (string)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.linux.is_device_mapper = false (bool)
linux.sysfs_path = '/sys/block/mmcblk0/mmcblk0p1' (string)
volume.is_disc = false (bool)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_0x00011406' (string)
volume.is_partition = true (bool)
volume.partition.number = 1 (0x1) (int)
volume.block_size = 512 (0x200) (int)
volume.num_blocks = 15743637 (0xf03a95) (int)
volume.size = 8060742144 (0x1e0752a00) (uint64)
block.device = '/dev/mmcblk0p1' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
block.major = 179 (0xb3) (int)
volume.partition.media_size = 8068268032 (0x1e0e80000) (uint64)
block.minor = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
block.is_volume = true (bool)
volume.partition.type = '0x0b' (string)


the lshal --monitor gives: 22:15:59.284: storage_serial_0x00011406 added 22:15:59.456: volume_uuid_8f674bee_1128_4379_b061_c94c5995f8e0 added 22:16:00.007: volume_uuid_8f674bee_1128_4379_b061_c94c5995f8e0 property volume.mount_point = '/media/disk' 22:16:00.022: volume_uuid_8f674bee_1128_4379_b061_c94c5995f8e0 property volume.is_mounted = true

/media/.hal-mtab contains:

/dev/mmcblk0p1 1000 0 ext2 nosuid,nodev,uhelper=hal /media/disk



In the case gui will NOT automount the sdhc card, hal-device gives:

0: udi = '/org/freedesktop/Hal/devices/pci_1106_95d0_mmc_host_mmc_card_rca45928'

mmc.date = '01/2008' (string)
mmc.hwrev = 1 (0x1) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0/mmc_host/mmc0/mmc0:b368' (string)
info.subsystem = 'mmc' (string)
info.vendor = 'Unknown (28)' (string)
mmc.fwrev = 0 (0x0) (int)
info.parent = '/org/freedesktop/Hal/devices/pci_1106_95d0_mmc_host' (string)
info.product = 'SDC' (string)
mmc.serial = 70662 (0x11406) (int)
mmc.rca = 45928 (0xb368) (int)
linux.hotplug_type = 2 (0x2) (int)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_95d0_mmc_host_mmc_card_rca45928' (string)
mmc.cid = '1c535653444320201000011406008100' (string)
linux.subsystem = 'mmc' (string)
info.linux.driver = 'mmcblk' (string)
mmc.csd = '400e00325b5900003c1c7f800a400000' (string)
mmc.type = 'SD' (string)
mmc.scr = '0235000000000000' (string)
mmc.vendor = 'Unknown (28)' (string)
mmc.oem = 'Unknown (21334)' (string)

lshal --monitor gives:

22:16:28.225: pci_1106_95d0_mmc_host_mmc_card_rca45928 added

/media/.hal-mtab contains nothing.

Is there any hint about this issue? Thanks very much.

slchen

[teachop]

I am bumping this because I have the same problem. When I put in my SD card, it automounts the first time. After I unmount it (that is the right thing for eject I assume) then it will not longer automount. Anybody know how to address this? Thanks.

[GoldWing]

somebody has a solution for this already ?