keymoo
July 16th, 2008, 12:26 AM
Hi there,
I have an Abit NF7-S V2.0 motherboard and have just purchased and tried to install a SAMSUNG HD103UJ 1TB hard disk into it. When I power up the PC it gets to a screen which looks like this:
SiI 3112A SATARaid BIOS Version 4.2.47
Press F4 to enter RAID Utility
1 SAMSUNG HD103UJ
and then doesn't get any further. With my old drive the screen looked like this:
SiI 3112A SATARaid BIOS Version 4.2.47
Press F4 to enter RAID Utility
1 <MY_OLD_DRIVE_ID> 464000and it then proceeded to boot linux.
Solutions tried so far:
I went to the samsung site and downloaded their ESTOOL.EXE but the problem is the system cannot get past the above screen to boot into the tool.
I tried plugging the HD into a different SATA socket on the mobo, but same prob.
I plugged in the old drive using the same cable and all works fine.
Any ideas?
Thanks
I have an Abit NF7-S V2.0 motherboard and have just purchased and tried to install a SAMSUNG HD103UJ 1TB hard disk into it. When I power up the PC it gets to a screen which looks like this:
SiI 3112A SATARaid BIOS Version 4.2.47
Press F4 to enter RAID Utility
1 SAMSUNG HD103UJ
and then doesn't get any further. With my old drive the screen looked like this:
SiI 3112A SATARaid BIOS Version 4.2.47
Press F4 to enter RAID Utility
1 <MY_OLD_DRIVE_ID> 464000and it then proceeded to boot linux.
Solutions tried so far:
I went to the samsung site and downloaded their ESTOOL.EXE but the problem is the system cannot get past the above screen to boot into the tool.
I tried plugging the HD into a different SATA socket on the mobo, but same prob.
I plugged in the old drive using the same cable and all works fine.
Any ideas?
Thanks