PDA

View Full Version : [ubuntu] [SOLVED] SE K750i gprs connection.



richlyn9
June 28th, 2008, 09:28 AM
Hi!
i am trying to connect SE K750i phone using airtel gprs via the usb cable(though havent come across anyone with the same exact instance),Have tried all resources on the forums.

I opened Terminal and typed sudo wvdialconfig
which returns command not found

pls advice future action plan.

prshah
June 28th, 2008, 10:57 AM
sudo wvdialconfig


You're looking for
sudo wvdialconf

richlyn9
June 28th, 2008, 01:37 PM
richlyn@richlyn-personal:~$ sudo wvdialconf
[sudo] password for richlyn:
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Sony Ericsson K750
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- OK
ttyACM1<*1>: ATQ0 V1 E1 Z -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM1<*1>: Modem Identifier: ATI -- Sony Ericsson K750
ttyACM1<*1>: Speed 4800: AT -- OK
ttyACM1<*1>: Speed 9600: AT -- OK
ttyACM1<*1>: Speed 19200: AT -- OK
ttyACM1<*1>: Speed 38400: AT -- OK
ttyACM1<*1>: Speed 57600: AT -- OK
ttyACM1<*1>: Speed 115200: AT -- OK
ttyACM1<*1>: Speed 230400: AT -- OK
ttyACM1<*1>: Speed 460800: AT -- OK
ttyACM1<*1>: Max speed is 460800; that should be safe.
ttyACM1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyACM1<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
richlyn@richlyn-personal:~$
richlyn@richlyn-personal:~$
richlyn@richlyn-personal:~$




Then I edited the wvdial.conf and saved it

richlyn@richlyn-personal:~$ sudo gedit /etc/wvdial.conf
[sudo] password for richlyn:
richlyn@richlyn-personal:~$ wvdial
WvDial<*1>: WvDial: Internet dialer version 1.56
WvModem<*1>: Cannot get information for serial port.
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATDT*99#
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATDT*99#
WvDial Modem<*1>: CONNECT
WvDial Modem<*1>: ~[7f]}#@!}!}!} }8}#}$@#}(}"}'}"}"}&} } } } }%}&[1f]R.hx5~
WvDial<*1>: Carrier detected. Waiting for prompt.
WvDial Modem<*1>: ~[7f]}#@!}!}"} }8}#}$@#}(}"}'}"}"}&} } } } }%}&[1f]R.h2'~
WvDial<*1>: PPP negotiation detected.
WvDial<Notice>: Starting pppd at Sat Jun 28 17:19:40 2008
WvDial<Err>: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
WvDial<Err>: --> PAP (Password Authentication Protocol) may be flaky.
WvDial<Err>: Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
WvDial<Err>: --> CHAP (Challenge Handshake) may be flaky.
WvDial<Notice>: Pid of pppd: 5815
WvDial<*1>: Using interface ppp0
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: local IP address 117.98.36.156
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: remote IP address 10.64.64.64
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: primary DNS address 202.56.230.5
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: secondary DNS address 202.56.240.5
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
Caught signal 2: Attempting to exit gracefully...
WvDial<*1>: Terminating on signal 15
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: Connect time 1.5 minutes.
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: pppd: [10]�[06][08]��[06][08]
WvDial<*1>: Disconnecting at Sat Jun 28 17:21:08 2008
richlyn@richlyn-personal:~$


ithis has get resolved,,..........
i am now working fine in ubuntu....
and writing this in firefox...

prshah
June 28th, 2008, 02:04 PM
r
ithis has get resolved,,..........
i am now working fine in ubuntu....
and writing this in firefox...

Do you mean that this issue is solved (looks like it). In that case, please mark the thread solved:
click on "Thread Tools" _near_ the top right hand side of the page, then select "Mark Thread as Solved".