Install hangs @ 5% to 22%

[mnord00]

Kubuntu 8.04 Live CD boots up, display is fine, I can get on the internet etc. But when I install and it starts to partition it stops at anywhere from 5% to 22% and then gives an error Temp too high (127 c) shutting down. I went to the bios and checked the temp and it was at 51c. I tried Kubuntu 7.10 and had the same results. I have an ECS GV750VT-M mother board. Can anyone tell me what to do. I think I have to change something in my Bios but I do not know what. If I need to hit F6 to set perameters, I need info on that as well.
Thanks

[Pumalite]

Burn a new CD. Follow this guide>
https://help.ubuntu.com/community/BurningIsoHowto?highlight=%28burn%29%7C%28
Do md5sum, burn at 4x or less in good quality CD-R, check CD integrity before install.

[mnord00]

I tried your suggestion and the cd passed the integrity check. I also used the cd to install on another pc. The install went just fine on the other pc. I think I have a hardware incomparability problem, but I am not sure which direction I should go. Thanks for your help

[Pumalite]

You can try the Alternate CD, but you might need this anyway:
http://www.hispafuentes.com/hf-doc/HOWTOs/BootPrompt-HOWTO-html/BootPrompt-HOWTO.html#toc1
http://d-i.alioth.debian.org/manual/en.i386/ch05s02.html
http://www.tldp.org/HOWTO/BootPrompt-HOWTO.html
http://grumpymole.blogspot.com/2007/05/ubuntu-how-to-edit-grub-boot-parameters.html
https://help.ubuntu.com/7.04/installation-guide/hppa/boot-parms.html
http://www.cyberciti.biz/tips/10-boot-time-parameters-you-should-know-about-the-linux-kernel.html
http://www.knoppix.net/wiki/Cheat_Codes
http://www.knoppix.net/wiki/Kernel-parameters-2.6.11
noapic nolapic acpi=off irqpoll pci=noacpi pnpbios=off vga=0x317

[mnord00]

Thank you for all of the web links especially the info on acpi. You have posted this info before, but I could not locate it. I will let you know what resolved my problem.