PDA

View Full Version : [ubuntu] Can't Get My Wireless to Work



Jenga-kun
April 24th, 2008, 10:22 PM
I installed Hardy Heron not to long ago and so far I'm really liking it except that my wireless isn't working. I'm trying to fix it by following the instructions here: http://ubuntuforums.org/showthread.php?t=684495 but when I type this: lshw -C network into terminal I get this:

jesse@jesse-laptop:~$ sudo lshw -C network
[sudo] password for jesse:
*-network:0
description: Ethernet interface
product: BCM4401 100Base-T
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 01
serial: 00:0b:db:97:5e:6d
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=half latency=32 link=no module=ssb multicast=yes port=twisted pair speed=10MB/s
*-network:1
description: Network controller
product: BCM4306 802.11b/g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=b43-pci-bridge latency=32 module=ssb
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:90:4b:24:bd:f2
capabilities: ethernet physical wireless
configuration: broadcast=yes multicast=yes wireless=IEEE 802.11g

which I think tells me that I have no drivers installed for my wireless card. Now I don't know what to do. I'm considering installing one of the drivers from here: http://linuxwireless.sipsolutions.net/en/users/Drivers/b43 but I don't know which one of the four drivers to install.

Jenga-kun
April 25th, 2008, 04:01 PM
I could use all the help I can get.