View Full Version : [ubuntu] Dell Poweredge840
April 23rd, 2008, 04:06 PM
Installation of Ubuntu 6.06LTS Server edition ended in a disappointment!:(
Dowloaded the distribution to CD,
started a brand new Dell Poweredge840 (empty disks) with the installation CD,
picked install from the menu,
3lines is what I het, after that ... nothing:
Booting the kernel.
Strating system log deamon: syslogd, klogd.
That's all folks!
Any suggestion how to do the installation correctly?
April 23rd, 2008, 04:17 PM
It could be a bad installation disk. Check the disk integrity (menu item on opening screen).
April 23rd, 2008, 04:22 PM
Tried that one already.
It improves the probelem by 1 line ...
The system stops after "Booting the Kernel."
I did check the cheksum of the image, which was OK.
Is there a way to check the CD on a Windows system?
April 23rd, 2008, 04:25 PM
when i wait long enough also the third line appears
April 23rd, 2008, 05:37 PM
Is there a way to check the CD on a Windows system?No, I don't think so, because it has to be booted to be checked. You can try to boot it in another computer. If it boots OK in another machine, it might be a problem with the Live CD drivers working with your hardware. That can sometimes be worked around with kernel parameters, or a Safe Graphics mode boot, both accessed by pressing F6 at the first menu. If it doesn't boot in any machine, then it is probably a bad disk.
If the Md5 checksum of the .iso you downloaded checked out OK, but the disk is bad, it is probably a bad burn. Burn again, but use a slow speed, no more than 4x, with good quality CD-R media.
Powered by vBulletin® Version 4.2.2 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.