PDA

View Full Version : Laptop to receiver



OlyPerson
February 2nd, 2008, 11:17 PM
So I want to be able to hook up my laptop to my receiver that I have in my room that I use to play records on also. Is there something that I can get to make my laptop able to play on it?
I was thinking something connecting the headphone jack to the red and white things on the receiver would work? Not sure, anyone have any ideas?
Would something like this work?
http://www.newegg.com/Product/Product.a … 6812149118

By the way, I have this receiver: http://www.classic-audio.com/marantz/2226b.html

twisted_steel
February 3rd, 2008, 01:05 AM
Your link to the Newegg page didn't work, but I have something similar for my receiver. I use a 3.5mm Stereo Plug -> 2 RCA Plug cable from Monoprice: link (http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10218&cs_id=1021804&p_id=665&seq=1&format=2). Connect the one end to your headphone jack on the laptop and the other end to the red/white Line-in on your receiver.

koleoptero
February 3rd, 2008, 01:16 AM
You need a minijack to RCA cable and you'll be fine. If it doesn't sound good you should consider an external soundcard. But I believe that conneting the laptop to an input of the receiver won't cause you much trouble. Just remeber: Minijac to RCA. And make sure it is stereo (It will have 2 RCA plugs)

~LoKe
February 3rd, 2008, 01:20 AM
I've used just about every method of connecting an audio source to my receiver. The first thing I tried was hooking up my MP3 player to my receiver via 3.5mm jack for headphones, which was attached to a converter to fit in the headphone-out jack on my receiver. It actually worked, but don't ask me how that's possible. I used the same for my computer.

Then I tried a headphone jack to RCA (red/white) and that also worked.

Since then, I've done a bit of upgrading and settled for digital coax then optical toslink.

koleoptero
February 3rd, 2008, 01:25 AM
I've used just about every method of connecting an audio source to my receiver. The first thing I tried was hooking up my MP3 player to my receiver via 3.5mm jack for headphones, which was attached to a converter to fit in the headphone-out jack on my receiver. It actually worked, but don't ask me how that's possible. I used the same for my computer.

Then I tried a headphone jack to RCA (red/white) and that also worked.

Since then, I've done a bit of upgrading and settled for digital coax then optical toslink.

When you reach the state of having even a digital amp you should make a tree displaying all the phases you went through to get there :D :p

~LoKe
February 3rd, 2008, 01:29 AM
When you reach the state of having even a digital amp you should make a tree displaying all the phases you went through to get there :D :p

If I made a tree I'd probably hang myself from it.