View Full Version : Problem running Salome

September 12th, 2007, 12:41 PM
Hi everyone,

I installed Salome from the Dedian-Starge binary through the installwizard and it seems to have installled ok but i cant run it. Whe the installwizard finished i clicked the button "Run Salome now" (or words to that effect) and it ran fine! Then i closed it.

running it again returns this:

jack@Star-Ship-Omega:~/salome_3.2.6/KERNEL_3.2.6/bin/salome$ runSalome
Configure parser: Warning : could not find user configuration file
Searching for a free port for naming service: 2810 - OK
Traceback (most recent call last):
File "/home/jack/salome_3.2.6/KERNEL_3.2.6/bin/salome/runSalome.py", line 984, in ?
clt,args = main()
File "/home/jack/salome_3.2.6/KERNEL_3.2.6/bin/salome/runSalome.py", line 975, in main
searchFreePort(args, save_config)
File "/home/jack/salome_3.2.6/KERNEL_3.2.6/bin/salome/runSalome.py", line 926, in searchFreePort
f = open(os.environ['OMNIORB_CONFIG'], "w")
IOError: [Errno 13] Permission denied: '/home/jack/.omniORB_Star-Ship-Omega_2810.cfg'

Any assistance would be greatly appreciated.

September 13th, 2007, 01:00 PM
Is there any error during the installation process?

Seems a bad install to me.

also it might be omniORB error which I think there is a thread that had discussed on the solution.

That's all i get from your info.

Hope this lead you to a way.