HowTo: Use your mobile phone as a remote control for your Ubuntu system [Archive]

View Full Version : HowTo: Use your mobile phone as a remote control for your Ubuntu system

elektronaut

January 18th, 2007, 10:39 PM

Have you ever been attending presentations envying all the time the guy in front using his mobile phone to switch the slides? Or dreamed of sitting on the sofa and controlling your music player without having to go to the computer?
At least I did and so I searched on the net for possible solutions. Most of the projects are either outdated, only work for certain phones or certain software on the computer. Finally I discovered anyremote from Mike Fedotov, which you can download from the project's site at sourceforge:

http://sourceforge.net/projects/anyremote/

The great thing is that it works for different connections like bluetooth, infrared or serial cable (though I only tested bluetooth) and, according to the project notes, for all kinds of phones. Several configuration files for different software, e.g. amarok, xmms, etc. are included, and it is easy to write new ones.

NB:
This was tested on Ubuntu 6.10 (32bit).
There is also the KDE version kAnyRemote, which provides a little panel applet to change configuration files. I also tried this flavor, as I have KDE installed. But I'll focus on anyremote, the CLI version, as it has the same functionality, and you don't need to install any KDE libraries.
I only describe using bluetooth and assume you have already set up a bluetooth connection between your computer and your phone.
I assume you have a java enabled phone (JSR-82), I haven't investigated yet how this works if your phone doesn't support java.
This post will be edited if questions or suggestions come up.

Steps to take:

Install dependencies
I can't tell you exactly what you need, because I encountered only one missing package, and that was libbluetooth-dev. I guess you need the bluetooth libraries for compilation even if you'll use another kind of connection. So I'll simply list all the blue* packages that are installed on my system. Corrections considering unnecessary packages or missing packages are welcome! You can either use synaptic or aptitude or apt-get on the command line to install the packages, so for instance you have to enter:
$ sudo aptitude install checkinstall gcc build-essential other_missing_packages

gcc
build-essential
bluetooth
bluez-cups
bluez-hcidump
bluez-passkey-gnome
bluez-pin
bluez-utils
gnome-bluetooth
libbluetooth2
libbluetooth2-dev

Install anyremote
In case you have already compiled from source code before, this is nothing new to you. If not: Don't be afraid, there is no dark magic involved ;-) After downloading anyremote-*.tar.gz, go to the download directory, decompress the file, change to the now extracted directory and prepare for installation:

$ tar xvzf anyremote-*.tar.gz
$ cd anyremote-*
$ ./configure
$ make

Now, I advise you to have checkinstall installed, this will allow you to easily remove anyremote later on.
$ sudo aptitude install checkinstall
We install it:

$ sudo checkinstall
or, if checkinstall is not available
$ sudo make install
Install the Java client
The anyremote directory we extracted earlier contains the phone client file anyRemote.jar. Install this on your phone, either by sending it via bluetooth or by using a data cable.

Now, using an existent bluetooth connection, we can start anyremote and indicate which configuration file to use:

$ anyremote -f anyremote-2.6/cfg-examples/Server-style/adminExample.cfg &
Finally we start the java application on the phone, connect to the computer, and have fun!
The author is very cooperative and likes to hear from you if you used his program successfully with a phone not yet on his list on this page: http://anyremote.sourceforge.net/doc-html/intro.html. But let's try to keep questions concerning installation and such here in the forum.

BatteryCell

January 19th, 2007, 02:30 AM

Nice tutorial :-)

I installed it on my phone just like you said (I did kanyremote). I start the service on my computer and then I move to the phone and start the java. It searches and finds my computer, then I click connect but it doesn't do anything. it just sits there and thinks.

Any suggestions?

elektronaut

January 19th, 2007, 06:35 AM

Did you manage to have a working bluetooth connection before, e.g. for sending files? Which configuration file did you use? What says /tmp/kanyremote.log?

BatteryCell

January 19th, 2007, 04:58 PM

I used the obex file transfer to get the java prog to my phone, so yes. I used the configuration file that you suggested, adminExample.cfg, and the log file does give a bunch of repeated errors/info along the lines of:

[Thu Jan 18 20:43:21 2007] - ERROR - error writing to socket
[Thu Jan 18 20:43:21 2007] - DEBUG - Fails in writeSocketConn() (Set)
[Thu Jan 18 20:47:14 2007] - DEBUG - KAnyRemote::doQuit()
[Thu Jan 18 20:47:14 2007] - DEBUG - freeCfg()
[Thu Jan 18 20:47:14 2007] - DEBUG - freeCfg() OK

Thats probably what is not letting it connect, but what do I do to fix it lol?

elektronaut

January 21st, 2007, 02:13 AM

I don't have enough experience with bluetooth to suggest a solution. For me everything worked fine except some little problems in earlier versions. Hopefully somebody else has an idea, or you might try to contact the author. Sorry.

Rule

January 21st, 2007, 03:10 AM

nice project but it doesn't work with my Nokia 6265i :(

elektronaut

January 21st, 2007, 03:47 PM

nice project but it doesn't work with my Nokia 6265i :(
Strange, because http://www.phoneslim.com/nokia-6265i-information.html says it would support JSR-82. What's the problem?

elektronaut

January 21st, 2007, 04:07 PM

I used the obex file transfer to get the java prog to my phone, so yes. I used the configuration file that you suggested, adminExample.cfg, and the log file does give a bunch of repeated errors/info along the lines of:
...
Thats probably what is not letting it connect, but what do I do to fix it lol?
Did you try again after a reboot? Maybe something is still registered exclusively in some way for the bluetooth port?

mike_mike

January 22nd, 2007, 11:31 AM

Hi all !

I'm the author of kAnyRemote.
In case of questions send me e-mail with description of the problem and attached log file (/tmp/kanyremote.log) and cfg.file used.
Hope i could clarify situation for You.

Mike

mike_mike

January 22nd, 2007, 11:32 AM

Please send me log and cfg files.

rama

January 23rd, 2007, 11:48 PM

Anybody got a deb they 'd like to share cause I m trying to build the application and I get this:

anyremote-2.6$ ./configure
configure: error: cannot find install-sh or install.sh in . ./.. ./../..

Rule

January 24th, 2007, 02:24 AM

Strange, because http://www.phoneslim.com/nokia-6265i-information.html says it would support JSR-82. What's the problem?

on my laptop it's like I can only either have Bluetooth on and Wireless Off (or the other way around) so thats quite annoying, and ubuntu can't always find my phone. sometimes it will find it and work and other times not even notice it.

I will try again, i'm also having the same problem as rama.

EDIT: also when I copy the .jar file over to my phone I get "Application no supported. Delete?"

mike_mike

January 24th, 2007, 08:30 PM

Could You please try:
automake
aclocal
autoconf
before ./configure

or copy absent files from automake package (on my FC it is /usr/share/automake-1.9/install-sh)

rama

January 24th, 2007, 10:05 PM

I installed the automaka package and tried your suggestion but still :

$ automake
automake: configure.in: required file `./install-sh' not found
automake: configure.in: required file `./mkinstalldirs' not found
automake: configure.in: required file `./missing' not found
automake: configure.in: required file `./config.guess' not found
automake: configure.in: required file `./config.sub' not found
$ aclocal
$ autoconf
$ ./configure
configure: error: cannot find install-sh or install.sh in "." "./.." "./../.."

This is not the first time that I compile something from source (although I am far from a guru) and it does not make sense. This is the output of ls -l in the dir I'm executing the commands (in case something is wrong with the path I m in or the gz I downloaded):

CODE]$ ls -l
total 424
-rw-r--r-- 1 username username 41102 2007-01-24 22:58 aclocal.m4
-rw-r--r-- 1 username username 721 2007-01-17 19:05 anyRemote.jad
-rw-r--r-- 1 username username 64924 2007-01-17 19:05 anyRemote.jar
-rw-r--r-- 1 username username 1069 2007-01-14 16:26 anyremote.spec
-rw-r--r-- 1 username username 31 2006-12-26 13:51 AUTHORS
drwxr-xr-x 2 username username 4096 2007-01-24 22:58 autom4te.cache
drwxr-xr-x 5 username username 4096 2007-01-10 16:50 cfg-examples
-rw-r--r-- 1 username username 14 2006-12-26 13:51 ChangeLog
-rw-r--r-- 1 username username 2901 2007-01-24 22:58 config.log
-rwxr-xr-x 1 username username 182156 2007-01-24 22:58 configure
-rw-r--r-- 1 username username 823 2006-12-26 13:51 configure.in
-rw-r--r-- 1 username username 18009 2006-12-26 13:52 COPYING
lrwxrwxrwx 1 username username 31 2007-01-24 01:00 depcomp -> /usr/share/automake-1.9/depcomp
drwxr-xr-x 3 username username 4096 2007-01-14 16:04 doc-html
-rw-r--r-- 1 username username 287 2006-12-26 13:51 INSTALL
lrwxrwxrwx 1 username username 34 2007-01-24 01:00 install-sh -> /usr/share/automake-1.9/install-sh
drwxr-xr-x 2 username username 4096 2006-12-26 13:51 keymaps
-rw-r--r-- 1 username username 18489 2007-01-17 07:46 Makefile
-rw-r--r-- 1 username username 14 2006-12-26 13:51 Makefile.am
-rw-r--r-- 1 username username 10295 2007-01-24 22:58 Makefile.in
lrwxrwxrwx 1 username username 31 2007-01-24 01:00 missing -> /usr/share/automake-1.9/missing
-rw-r--r-- 1 username username 4584 2007-01-14 16:24 NEWS
-rw------- 1 username username 90 2006-12-26 13:51 nohup.out
-rw-r--r-- 1 username username 1253 2006-12-26 13:51 README
drwxr-xr-x 3 username username 4096 2007-01-17 19:05 src
-rw-r--r-- 1 username username 1 2006-12-26 13:51 TODO
-rw-r--r-- 1 username username 15 2007-01-14 16:24 VERSION
[/CODE]

I downloaded the kanyremote gz and run ./configure and it run fine (but I had some missing libs in that case which I cant install cause I 'm using some extra repos and all hell will break loose!)

PS: Thx for being so supportive!:smile:

deNniZ

January 24th, 2007, 11:36 PM

anyremote works on my pc, but not on my symbian s60 phone it's a "nokia n-gage" NEM-4, it's stuck in installing Java Program, and quits then with unknown error.

mike_mike

January 25th, 2007, 07:26 AM

Since anyRemote have limited suport of Bemused clients You can try Bemused symbian client
even if Java Client of anyRemote does not works ;-)

mike_mike

January 25th, 2007, 07:35 AM

To clarify situation...
Does configure works well for You in v2.7 ?
Does file /usr/share/automake-1.9/install-sh present on Your system ?

>automake: configure.in: required file `./config.sub' not found
Does You run automake with -a ??
automake -a

In case of failure with kAnyRemore You can try anyRemote anyway (it did not depends
on KDE at all and provide the same functionality)

GI-Orca

January 25th, 2007, 10:03 PM

Hi to all!

First I want to thank Mike for his great work.

I am using the cli version (2.4) on my edgy/gnome -box & 6280 nokia with some (rough) adaptions to cooperate with rhythmbox/dbus(attached). Today I wanted to upgrade to 2.7 but unfortunately the newest version of the java client crashes with
"Null Pointer java/lang/NullPointerException"
although the 2.6 Version client did work.
I am not really familiar with programming so I fear the client sources.
Help would be appreciated

Orca

rama

January 25th, 2007, 10:12 PM

Ok. I realized that by executng "sudo apt-get install automake" I got automake-1.4 installed and the link of your install-sh file was on .../automake-1.9/install-sh. I haven't got the slightest idea why this has happend since I didn't specify a version ...
So after installing automake version 1.9 ./configure ran fine, make ran fine but I get and error with sudo checkinstall :

Installing with make install...

========================= Installation results ===========================
Making install in src
make[1]: Entering directory `/home/jsar/Desktop/anyremote-2.7/src'
make[2]: Entering directory `/home/jsar/Desktop/anyremote-2.7/src'
/bin/bash ../mkinstalldirs /usr/local/bin
/bin/bash: ../mkinstalldirs: No such file or directory
make[2]: *** [install-binPROGRAMS] Error 127
make[2]: Leaving directory `/home/jsar/Desktop/anyremote-2.7/src'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory `/home/jsar/Desktop/anyremote-2.7/src'
make: *** [install-recursive] Error 1

**** Installation failed. Aborting package creation.

Cleaning up...OK

Bye.

Like I said I 'm far from an expert and I dont know how make install works but I 'm guessing that when checkinstall calls make install some directory is not found and that crashes the process. It may be due to slight distribution differences in directory organization. Is there anything I can do to fix it? :confused:

PS: I didn't execute sudo make install cause I don't know which files will be installed in which directories and if something goes wrong I don't know how to clean it up.

EDIT: I tried running the app directly from the src and it works... no sorry ... IT ROCKS! IT IS GREAT! Still I would be very interested in creating a deb file and uploading it to the forum for other people to be able to install it easily.

elektronaut

January 25th, 2007, 10:46 PM

I don't know why you get these errors, 'cause the installation of version 2.7 just ran fine on my Edgy. I attach the debian package generated by checkinstall which you can install like this:
sudo dpkg -i anyremote_2.7-1_i386.deb

rama

January 26th, 2007, 12:29 AM

Thank you:D

mike_mike

January 26th, 2007, 07:33 AM

mike_mike

January 26th, 2007, 07:35 AM

Did Java Client v2.7 works fine or crashes on Your phone ?

mike_mike

January 26th, 2007, 07:52 AM

Umm... When it crashed ?
At the load stage ? At connect stage ? After connect ? When You press some button ? (which one ?)
Could You please send to me logs (/tmp/*anyremote.log) ?

mike_mike

January 26th, 2007, 08:04 AM

Remarks about *cfg:

* #=%Timer(id1, 20, 0, status, /home/orca/dbustest.py.py --elapsed);
% should be the _first_ symbol in line

7=ExecAndSet(/home/orca/dbustest.py --previous; sleep.2 /home/orca/dbustest.py --song)
IMHO it should be
7=ExecAndSet(title,........)

mike_mike

January 26th, 2007, 08:07 AM

>it's stuck in installing Java Program, and quits then with unknown error
By the way, did You try to install other Java application ?
Did You use Nokia Suite to instal Java App ?

GI-Orca

January 26th, 2007, 10:09 AM

Hi!

The Phone is givining the exception on loading the programm (v2.7).
I just sent the jar file over with bluetooth, did work for previous versions.
There are no errors or additional info in the anyermote.log

rama

January 26th, 2007, 10:13 AM

Did You run configure with --prefix option ?
./configure --prefix=.... ?
Run ./configure --help to see the help.

Anyway, You can use anyremote from the src without any problem.

By tha way, which phone (manufacturer/model) do You use ?
Er no I didn't try that. Dont know what it does! Will try it!
My mobile is a Nokia 6230. Of all the cfgs I tried (not much) the one that is supposed to move the mouse did not work (I'll send you a log or something as soon as I get back from work). Amarok worked great!

mike_mike

January 26th, 2007, 01:06 PM

Try to add Set(debug,on) to the (Connect) line.
Then send me error message if it will be shown

GI-Orca

January 26th, 2007, 01:28 PM

I am not sure if I was meant :o

Adding
>Set (debug, on)
to my cfg did not bring any change

cu

mike_mike

January 26th, 2007, 02:32 PM

Could You please, try development version v2.8-alpha ?

mike_mike

January 26th, 2007, 06:06 PM

Updated version of v2.8-alpha here. I've corrected somesuspicious places )

mike_mike

January 26th, 2007, 10:52 PM

One more v2.8-alpha(3) ...
Hope the last one )

GI-Orca

January 27th, 2007, 02:44 AM

Client is working for me again thank you very much

mike_mike

January 27th, 2007, 12:44 PM

By the way, there is cfg.file for Rhytnmbox

GI-Orca

January 27th, 2007, 03:29 PM

rhytmbox.cfg: After adding the other aliases working delightfully well ...

phormion

January 27th, 2007, 04:23 PM

rama

January 28th, 2007, 06:40 PM

That did the trick. Txh.
Mike I was wrong about the mouse feature not working. I haven't installed the extra application that this function requires so it naturally did not work

bodhi.zazen

February 2nd, 2007, 05:17 AM

Nice How-to

This thread has been added to the UDSF wiki.

Mobile_phone_as_a_remote_control (http://doc.gwos.org/index.php/Mobile_phone_as_a_remote_control)

PsychedelicReaction

March 1st, 2007, 05:45 AM

i got a problem in make (kubuntu feisty):

michele@michele-laptop:~/Desktop/anyremote-2.8$ make
Making all in src
make[1]: Entering directory `/home/michele/Desktop/anyremote-2.8/src'
gcc -DPACKAGE_NAME=\"AnyRemote\" -DPACKAGE_TARNAME=\"anyremote\" -DPACKAGE_VERSION=\"0.3\" -DPACKAGE_STRING=\"AnyRemote\ 0.3\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"anyRemote\" -DVERSION=\"0.3\" -DSTDC_HEADERS=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_TERMIOS_H=1 -DHAVE_UNISTD_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_FORK=1 -DHAVE_VFORK=1 -DHAVE_WORKING_VFORK=1 -DHAVE_WORKING_FORK=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=$fd_set\ \*$ -DSELECT_TYPE_ARG5=$struct\ timeval\ \*$ -DHAVE_ISASCII=1 -DHAVE_SELECT=1 -DHAVE_STRCHR=1 -DHAVE_STRSTR=1 -I. -g -O2 -I/usr/local/include -Wall -D_REENTRANT -O2 -g -MT btio.o -MD -MP -MF .deps/btio.Tpo -c -o btio.o btio.c
btio.c:37:33: error: bluetooth/bluetooth.h: No such file or directory
btio.c:38:30: error: bluetooth/rfcomm.h: No such file or directory
btio.c: In function ‘openSocketPort’:
btio.c:298: error: storage size of ‘bt_addr’ isn’t known
btio.c:318: error: ‘BTPROTO_RFCOMM’ undeclared (first use in this function)
btio.c:318: error: (Each undeclared identifier is reported only once
btio.c:318: error: for each function it appears in.)
btio.c:351: error: ‘BDADDR_ANY’ undeclared (first use in this function)
btio.c:298: warning: unused variable ‘bt_addr’
btio.c: In function ‘listenAndAcceptSocketConn’:
btio.c:397: error: storage size of ‘bt_addr’ isn’t known
btio.c:398: error: ‘bdaddr_t’ undeclared (first use in this function)
btio.c:398: error: expected ‘;’ before ‘ba’
btio.c:449: warning: implicit declaration of function ‘baswap’
btio.c:449: error: ‘ba’ undeclared (first use in this function)
btio.c:451: warning: implicit declaration of function ‘batostr’
btio.c:451: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
btio.c:397: warning: unused variable ‘bt_addr’
make[1]: *** [btio.o] Error 1
make[1]: Leaving directory `/home/michele/Desktop/anyremote-2.8/src'
make: *** [all-recursive] Error 1

elektronaut

March 1st, 2007, 02:13 PM

I don't have any problems with 2.8 on Edgy. Did you check if you have the libraries installed which are mentioned in my first post?

georgie

March 4th, 2007, 07:18 PM

This worked here on my debian etch (ppc) ibook - both the howto and the app iself.

It's great! I'm cooking whilst fast forwarding amarok :)

Using nokia 6233.

I couldn't get bemused to work, but used server-style and amarok.cfg

Hurrah, thanks to the authors of the howto and the app.

herbster

March 10th, 2007, 06:12 AM

Anyone gotten this to work on a Treo? I have a Treo 650 and when I transfer the anyremote.jar file over, it sends to my phone but upon completion says "File received in an unknown format" and the file doesn't stay on my phone, I can't access it or anything. So I've gotten everything up to getting the dang anyremote.jar file to get onto my Treo so I can run it :( :(

mike_mike

March 10th, 2007, 10:55 PM

But did Treo supports Java ? Do Yoy use any other Java apps on Treo ?

mike_mike

March 10th, 2007, 10:56 PM

It needs to install development packege(s) for Blues.

cold_fu5ion

March 11th, 2007, 02:55 AM

Hey all,
I get an error when trying to compile anyremote.
When I ./configure I get "missing install-sh" the file is there with a picture of a padlock and a broken link icon next to it, as with two other files in the archive.

Has anyone else come across this or know how I can fix it?

Thanks.

herbster

March 11th, 2007, 05:48 AM

It needs to install development packege(s) for Blues.

What? You mean for the Treo? If so, where can I get them from please?

mike_mike

March 11th, 2007, 10:36 AM

No.
The question was: does Treo supports Java ?
Do You previously upload any java apps to treo ?

mike_mike

March 11th, 2007, 10:38 AM

This question was already discussed in this thread.
In shorts:
1.You can install automake-1.8
2.or run autoreconf

cold_fu5ion

March 11th, 2007, 11:53 AM

Hi again,
I worked out the problem, I should have read the entire topic first! I just installed automake-1.9 as thats what the files were linking to. Oddly enough it installed to the wrong directory so I ended up copying the install-sh and other missing files into the anyremote directory.

Now that it is installed I'm haivg another problem. I cant get it to run. at all :(
When I type this in terminal:

anyremote -f anyremote-2.9/cfg-examples/Server-style/adminExample.cfg
(chaning the anremote-2.6 to 2.9)

I get this.........

CFG: Use cfg file >anyremote-2.9/cfg-examples/Server-style/adminExample.cfg<
ERROR: Fails in init_cfg()

Any idea what this means or how I can get it running?

mike_mike

March 11th, 2007, 05:41 PM

It seems anyremote just can't find cfg file.
Try to use absolute path(/..../adminExample.cfg) or try to use any other cfg file.
Then inspect /tmp/anyremote.log file for some error messages (make sure there is a line Log=true in cfg file)

herbster

March 11th, 2007, 06:15 PM

The Treo is capable of running Java, yes!

mike_mike

March 11th, 2007, 08:05 PM

If Treo is capable of running Java, then upload java client like any other java app
But did Treo JSR82-compatible ?

cold_fu5ion

March 13th, 2007, 07:46 AM

For some reason that I can't figure out anyremote was compiled but is just sitting in /usr/local/bin by itself, it doesnt even have a folder to itself. I have no idea how that happened.

mike_mike , you were 100% right that it couldnt find the cfg file, I pointed it to the folder where the source (and cfg) files extraced to and it worked.
Thanks for the help! :) great little app.

Daniel15

March 13th, 2007, 12:31 PM

mike_mike

March 14th, 2007, 07:52 AM

Umm... a couple of questions:
Did You start anyremote on Your PC ?
Did You choose cfg.file from Server-style directory ?
Is any error reported in /tmp/*anyremote.log ?
Did You try to connect to the phone by minicom or cu ?

mike_mike

March 14th, 2007, 07:53 AM

configure --prefix=.... ??

Cheizzz

March 20th, 2007, 06:20 PM

You should list Automake 1.9 as a dependancy.

ricpersi

April 3rd, 2007, 12:31 PM

hi all, I'm new to this forum.. would it be hard for someone to make a deb for the latest anyremote version?
sorry if I'm asking something that cannot be done..

regards,

riccardo

vilto

April 6th, 2007, 04:56 AM

i was unable to install the anyremote.jar file in my n-gage qd......... any ideas???
is t5here a sis file available? for this

mike_mike

April 9th, 2007, 06:59 AM

Sorry..There is no sis file (

fanoodlehey

April 14th, 2007, 03:27 PM

I have installed kanyremote using ./configure, make and checkinstall

~$ sudo aptitude search kanyremote
i kanyremote - kanyremote allows the use of many mobiles to control various apps via bluetooth

But for some reason neither kanyremote or anyremote are recognised commands.
bash: kanyremote: command not found

Any ideas what I've done wrong?

elektronaut

April 14th, 2007, 08:22 PM

But for some reason neither kanyremote or anyremote are recognised commands.
bash: kanyremote: command not found
What do
locate kanyremote and
echo $PATH say? The path to the binary seems not be stored in the system's PATH environment variable.

fanoodlehey

April 15th, 2007, 10:21 AM

OK so it looks like kanyremote is in /usr/local/kde/bin/kanyremote

And PATH does not have that location.
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games

What's the best thing to do here. Add /usr/local/kde/bin to PATH or move kanyremote?

elektronaut

April 15th, 2007, 11:35 AM

I would either add an entry in the Gnome application starter menu with the full path to the executable or add the /usr/local/kde/bin/ to the PATH. The latter is better if you are going to use other KDE applications that might be installed into that directory. This way they all will be known to the system.

koshari

May 12th, 2007, 06:55 AM

i can paste a checkinstall 2.11 deb compiled for feisty if you like but you will still need the config files that are in the tarball. pasted in your home directory. you will likey need all the other dependencies (listed throughout this post) as well for it to work.

initially i also had some errors,

i renamed install to install.sh and installed checkinstall and then the deb compiled.

heres my launcher line for amarok, obviously you change the cfg file for the app you will want to contro and your home directorys name.

anyremote -f /home/<insert_your_home_directory_name_here>/anyremote-2.11/cfg-examples/Server-mode/amarok.cfg &

and heres a tarball with the deb, source and config files to be placed in your home directory.

mike_mike

May 23rd, 2007, 09:07 PM

v2.12 is out

sad_iq

June 21st, 2007, 12:28 PM

Works great(amarok at least) here using v2.12. ...however if you have long filenames in the playlist my phone(Motorola V6) responds a little slow...Anyway...great job done!!!
Also the
anyremote -f anyremote-2.6/cfg-examples/Server-style/adminExample.cfg & should be
anyremote -f anyremote-2.12/cfg-examples/Server-mode/adminExample.cfg & just for the ones that like to copy-paste without reading(like me :D)
Ps: I have some spanish characters in the filenames of my songs(like ñ, í, ò...)...and the client displays something else!! Don't know if it's my fault or what...Maybe someone can test(fix) it!!!

mike_mike

July 10th, 2007, 12:08 PM

Thank You for findings.
Hope problems with spanish characters will be solved in upcoming v3.0

herbster

July 10th, 2007, 04:47 PM

Okay I got everything working, installed anyRemote.jar on my Treo 650 but when I went to launch it I got an error that said:

javax.bluetooth.DiscoveryListener

I then output the details to a memo and this is what it gave:

ava.lang.NoClassDefFoundError: javax.bluetooth.DiscoveryListener
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Unknown Source)
at javax.microedition.lcdui.AppManager.launch(Unknown Source)
at javax.microedition.lcdui.AppManager.main(Unknown Source)

Damn, came so close, any ideas?

elektronaut

July 11th, 2007, 11:33 AM

The DiscoveryListener is part of JSR 82, see http://java.sun.com/javame/reference/apis/jsr082/javax/bluetooth/DiscoveryListener.html. It seems as if the Java environment on your Treo doesn't support JSR 82. You should try to find out which JVM is installed and check out if you can install another one.

Daniel15

July 17th, 2007, 10:06 AM

I compiled the application successfully, but can't seem to get my Sony Ericsson Z550i to connect. When I start the Java client, it says "Unconnected" at the top of the screen. I press the second softkey (More) and choose "Search". It says "Searching..." for a while, and then returns "Done." I'm not sure what to do after this...

It's getting here late now, so I may be doing something wrong. I'll read through the documentation again tommorow, and try to figure it out :)

Just as an update, I tried this again today (on Feisty, I was previously using Edgy), and it worked perfectly. I'm now controlling AmaroK via my phone :D

To the author: Excellent work! I absolutely love this, it's really cool :D

budimagelang

July 19th, 2007, 06:05 PM

I'm use Sony Ericsson K510i. And it's work with Desknote ECS A535 with Ubuntu 7.04. My Bluetooth Cryptonix.

I'm reading this forum 3 hour ago, then try, and success.

But, most of cfg file is for KDE (KUBUNTU). How to make/build cfg file for UBUNTU? (like mplayer)

Last, I so sorry for my english. I'm Indonesian. I Just a teacher ITC in a High School.

purfier

July 19th, 2007, 10:06 PM

purfier@dreamMedia:~$ CFG: Use cfg file >./anyremote-2.12/cfg-examples/Server-mode/amarok.cfg<
INFO: log file is /tmp/anyremote.log.purfier
Serial Port service registered
ERROR: Couldn't attach to DCOP server!
: cannot connect to X server
ERROR: Couldn't attach to DCOP server!
ERROR: Couldn't attach to DCOP server!
ERROR: Couldn't attach to DCOP server!

And the app does not respond to what I press on my phone, stop,play etc.

purfier

July 19th, 2007, 10:19 PM

(rhythmbox-client:7181): Rhythmbox-WARNING **: Failed to execute dbus-launch to autolaunch D-Bus session

(rhythmbox-client:7187): Rhythmbox-WARNING **: Failed to execute dbus-launch to autolaunch D-Bus session

(rhythmbox-client:7191): Rhythmbox-WARNING **: Failed to execute dbus-launch to autolaunch D-Bus session

(rhythmbox-client:7197): Rhythmbox-WARNING **: Failed to execute dbus-launch to autolaunch D-Bus session

(rhythmbox-client:7203): Rhythmbox-WARNING **: Failed to execute dbus-launch to autolaunch D-Bus session
INFO: Wait 5 seconds to connect ...

dont know what error it is, but cant control ryhtmbox ...

mike_mike

July 23rd, 2007, 07:25 AM

Do You use KDE ? DCOP works only if You run KDE.

mike_mike

July 23rd, 2007, 07:27 AM

2 purfier:
Which distro do You use ?
Gnome or KDE (or some other window manager)?
Did You managed al least some cfg.files works for You ?

mike_mike

July 23rd, 2007, 07:31 AM

2 budimagelang:
>How to make/build cfg file for UBUNTU? (like mplayer)
The syntax of cfg.file is the SAME ... You have to find out the way to control You app from console.
Then You will be able to write some script wrapper to make remote control.
Read the FAQ page on http://anyremote.sf.net

Daniel15

July 28th, 2007, 05:26 PM

Do You use KDE ? DCOP works only if You run KDE.

This is not true... I'm using DCOP fine with GNOME ;)
Amarok is not only a KDE player... It works perfectly fine under GNOME as well :)

zuzuzzzip

August 8th, 2007, 07:56 PM

what socket should i use?

I thought socket://bluetooth:10 but doesn't seem to work...
log:

CFG - [Mode] default
CFG - 61441 = ExecAndSet(title<|>,nokiafn 61441);ExecAndSet(status<|>,nokiafn title);
CFG - 241 = ExecAndSet(title<|>,nokiafn 241);ExecAndSet(status<|>,nokiafn title);
CFG - 32 = ExecAndSet(title<|>,nokiafn 32);ExecAndSet(status<|>,nokiafn title);
CFG - 231 = ExecAndSet(title<|>,nokiafn 231);ExecAndSet(status<|>,nokiafn title);
CFG - -50 = ExecAndSet(title<|>,nokiafn -50);ExecAndSet(status<|>,nokiafn title);
CFG - 0 = ExecAndSet(title<|>,nokiafn 0);ExecAndSet(status<|>,nokiafn title);
CFG - 46 = ExecAndSet(title<|>,nokiafn 46);ExecAndSet(status<|>,nokiafn title);
CFG - 44 = ExecAndSet(title<|>,nokiafn 44);ExecAndSet(status<|>,nokiafn title);
CFG - 110 = ExecAndSet(title<|>,nokiafn 110);ExecAndSet(status<|>,nokiafn title);
CFG - 98 = ExecAndSet(title<|>,nokiafn 98);ExecAndSet(status<|>,nokiafn title);
CFG - 99 = ExecAndSet(title<|>,nokiafn 99);ExecAndSet(status<|>,nokiafn title);
CFG - 120 = ExecAndSet(title<|>,nokiafn 120);ExecAndSet(status<|>,nokiafn title);
CFG - 122 = ExecAndSet(title<|>,nokiafn 112);ExecAndSet(status<|>,nokiafn title);
CFG - 9 = ExecAndSet(title<|>,nokiafn 9);ExecAndSet(status<|>,nokiafn title);
CFG - 108 = ExecAndSet(title<|>,nokiafn 108);ExecAndSet(status<|>,nokiafn title);
CFG - 1 = ExecAndSet(title<|>,nokiafn 1);ExecAndSet(status<|>,nokiafn title);
CFG - 115 = ExecAndSet(title<|>,nokiafn 115);ExecAndSet(status<|>,nokiafn title);
CFG - 97 = ExecAndSet(title<|>,nokiafn 97);ExecAndSet(status<|>,nokiafn title);
CFG - 112 = ExecAndSet(title<|>,nokiafn 112);ExecAndSet(status<|>,nokiafn title);
CFG - 111 = ExecAndSet(title<|>,nokiafn 111);ExecAndSet(status<|>,nokiafn title);
CFG - 105 = ExecAndSet(title<|>,nokiafn 105);ExecAndSet(status<|>,nokiafn title);
CFG - 121 = ExecAndSet(title<|>,nokiafn 121);ExecAndSet(status<|>,nokiafn title);
CFG - 116 = ExecAndSet(title<|>,nokiafn 116);ExecAndSet(status<|>,nokiafn title);
CFG - 101 = ExecAndSet(title<|>,nokiafn 101);ExecAndSet(status<|>,nokiafn title);
CFG - 119 = ExecAndSet(title<|>,nokiafn 119);ExecAndSet(status<|>,nokiafn title);
CFG - 113 = Set(text,replace,TEXT,Loading ...<|>);ExecAndSet(title<|>,nokiafn 113);ExecAndSet(status<|>,nokiafn title);
CFG - #(Connect) = Set(parameter,joystick_up,-1,joystick_down,-2,joystick_left,-3,joystick_right,-4,joystick_push,-5<|>);Set(title,Modo activo: teclado<|>);Set(icons,Keyboard,0,empty,1,empty,2,empty,3,emp ty,4,empty,5,empty,6,empty,7,empty,8,empty,9,empty ,*,empty,0,empty,#,empty<|>);
CFG - (Connect) = Set(parameter,debug,on<|>);Set(parameter,fix_joystick,auto<|>);Set(title,Modo activo: teclado<|>);Set(icons,Keyboard,0,empty,1,empty,2,empty,3,emp ty,4,empty,5,empty,6,empty,7,empty,8,empty,9,empty ,*,empty,0,empty,#,empty<|>);
CFG - Cancel = Exit<|>;
CFG - Back = Set(text,close<|>);
CFG - [ModeEnd] default
CFG - [Aliases]
CFG - Key 241 aliased to Cancel
CFG - [End]
CFG - [Alarms]
CFG - [End]
CFG - [Parameters]
CFG - AutoRepeat No
CFG - Debug Yes
CFG - Device bluetooth:10
CFG - Log Yes
CFG - Max Text Size 18
CFG - Retry Sec 5
CFG - Screen Menu Yes
CFG - [End]
[Wed Aug 8 20:55:25 2007] - DEBUG - mainRoutine
[Wed Aug 8 20:55:25 2007] - INFO - openPort()
[Wed Aug 8 20:55:25 2007] - DEBUG - Bluetooth Sockets Server mode. Use channel 10
[Wed Aug 8 20:55:25 2007] - INFO - registered SP for channel 10
[Wed Aug 8 20:55:25 2007] - DEBUG - findItem()
[Wed Aug 8 20:55:25 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Wed Aug 8 20:55:25 2007] - INFO - No command on init

[Wed Aug 8 20:55:25 2007] - DEBUG - initPort
[Wed Aug 8 20:55:25 2007] - INFO - Server mode: Waiting connection
[Wed Aug 8 20:55:25 2007] - INFO - listenAndAcceptSocketConn

if you're wondering what config file i used, I copied the one that came with the package...

AutoRepeat=false
Device=bluetooth:10
Log=true
Debug=true
RetrySecs=5
Screen=true

[Aliases]
241=Cancel
[End]

[Keys]

Back=Set(text,close)

Cancel=Exit;
(Connect)=Set(parameter,debug,on);Set(parameter,fi x_joystick,auto);Set(title, Modo activo: teclado);Set(icons,Keyboard,0,empty,1,empty,2,empt y,3,empty,4,empty,5,empty,6,empty,7,empty,8,empty, 9,empty,*,empty,0,empty,#,empty);
# If does not work try to change to
#(Connect)=Set(parameter,joystick_up,-1,joystick_down,-2,joystick_left,-3,joystick_right,-4,joystick_push,-5);Set(title, Modo activo: teclado);Set(icons,Keyboard,0,empty,1,empty,2,empt y,3,empty,4,empty,5,empty,6,empty,7,empty,8,empty, 9,empty,*,empty,0,empty,#,empty);
# where -1:-5 is keykodes of joystick(possibley it needs to change them)

113 = Set(text,replace,TEXT,Loading ...);ExecAndSet(title, nokiafn 113); ExecAndSet(status, nokiafn title);
119 = ExecAndSet(title, nokiafn 119); ExecAndSet(status, nokiafn title);
101 = ExecAndSet(title, nokiafn 101); ExecAndSet(status, nokiafn title);
116 = ExecAndSet(title, nokiafn 116); ExecAndSet(status, nokiafn title);
121 = ExecAndSet(title, nokiafn 121); ExecAndSet(status, nokiafn title);
105 = ExecAndSet(title, nokiafn 105); ExecAndSet(status, nokiafn title);
111 = ExecAndSet(title, nokiafn 111); ExecAndSet(status, nokiafn title);
112 = ExecAndSet(title, nokiafn 112); ExecAndSet(status, nokiafn title);
97 = ExecAndSet(title, nokiafn 97); ExecAndSet(status, nokiafn title);
115 = ExecAndSet(title, nokiafn 115); ExecAndSet(status, nokiafn title);
1 = ExecAndSet(title, nokiafn 1); ExecAndSet(status, nokiafn title);
108 = ExecAndSet(title, nokiafn 108); ExecAndSet(status, nokiafn title);
9 = ExecAndSet(title, nokiafn 9); ExecAndSet(status, nokiafn title);
122 = ExecAndSet(title, nokiafn 112); ExecAndSet(status, nokiafn title);
120 = ExecAndSet(title, nokiafn 120); ExecAndSet(status, nokiafn title);
99 = ExecAndSet(title, nokiafn 99); ExecAndSet(status, nokiafn title);
98 = ExecAndSet(title, nokiafn 98); ExecAndSet(status, nokiafn title);
110 = ExecAndSet(title, nokiafn 110); ExecAndSet(status, nokiafn title);
44 = ExecAndSet(title, nokiafn 44); ExecAndSet(status, nokiafn title);
46 = ExecAndSet(title, nokiafn 46); ExecAndSet(status, nokiafn title);
0 = ExecAndSet(title, nokiafn 0); ExecAndSet(status, nokiafn title);
-50 = ExecAndSet(title, nokiafn -50); ExecAndSet(status, nokiafn title);
231 = ExecAndSet(title, nokiafn 231); ExecAndSet(status, nokiafn title);
32 = ExecAndSet(title, nokiafn 32); ExecAndSet(status, nokiafn title);
241 = ExecAndSet(title, nokiafn 241); ExecAndSet(status, nokiafn title);
61441 = ExecAndSet(title, nokiafn 61441); ExecAndSet(status, nokiafn title);

[End]

zuzuzzzip

August 8th, 2007, 09:46 PM

nm! got a connection!

but my buttons don't work (in fact the screen is black and says keyboard as title and in white letter modo: terclavo -- which for all i know means mode: keyboard :P)
so there must be something wrong in my config file...
I have a nokia N80 and Ubuntu 7.04 (Gnome).

I'd like to make it work with rhythmbox!

mike_mike

August 9th, 2007, 08:40 AM

2 zuzuzzzip:
Which version of anyRemote do You use ?
Did cfg-examples/Server-mode/kdialog.cfg works for You ?

Please, send logs&and terminal output to anyremote@mail.ru

zuzuzzzip

August 9th, 2007, 12:53 PM

no (sh: kdialog: not found), I'm not running KDE
but adminExample does!
I just need the right config for a nokia n80 to control my music

which logs & terminal output should I mail?
this is the one for adminExample.cfg

zuzuzzzip@ZuzuPC-ubuntu:~/downloads/anyremote-3.0/cfg-examples/Server-mode$ anyremote -f adminExample.cfg
CFG: Use cfg file >adminExample.cfg<
INFO: log file is /home/zuzuzzzip/.anyRemote/anyremote.log
Serial Port service registered
Finish events forwarding
log file:

CFG - [Mode] PROCS
CFG - Back($$) = SetMode(LIST<|>);
CFG - Kill($$) = Exec(<|>kill `echo $(Param) | cut -d ' ' -f 1`;ExecAndSet(list,replace,SAME<|>,ps -o pid -o command -u `whoami` | tr -s ' ' | cut -d ' ' -f 1,2,3 | sed 's/$/,/' | grep -v sed | grep -v cut);
CFG - (EnterMode) = ExecAndSet(list,replace,User Processes<|>,ps -o pid -o command -u `whoami` | tr -s ' ' | cut -d ' ' -f 1,2,3 | sed 's/$/,/' | grep -v sed | grep -v cut);Set(menu,replace,Kill<|>);
CFG - [ModeEnd] PROCS
CFG - [Mode] TXT2
CFG - Back = Set(text,close<|>);SetMode(FILES<|>);
CFG - [ModeEnd] TXT2
CFG - [Mode] FILES
CFG - Back($$) = SetMode(LIST<|>);Set(list,replace,Available commands,Disk free space,Run Top, Stop Top, Uptime, User Processes, File List,Dmesg output<|>);Set(menu,replace,Choose<|>);
CFG - Choose($$) = ExecAndSet(list,replace,SAME<|>,echo 'cd `cat $HOME/.anyRemote/ar_storedir.tmp`;if [ -d $(Param) ]; then cd $(Param);fi;pwd>$HOME/.anyRemote/ar_storedir.tmp;ls -F| sed "s/$/,/"|sed "s/(/openbrace/g"|sed "s/)/closebrace/g";'|bash -f -s);Set(list,add,SAME,..<|>);
CFG - File info($$) = ExecAndSet(text,replace,File info<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;file $(Param));Set(text,add,SAME,\n<|>);ExecAndSet(text,add,File info<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;ls -l $(Param));SetMode(TXT2<|>);
CFG - (EnterMode) = ExecAndSet(list,replace,Files<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;echo `pwd`>$HOME/.anyRemote/ar_storedir.tmp;ls -F| sed 's/$/,/'|sed 's/(/openbrace/g'|sed 's/)/closebrace/g');Set(list,add,SAME,..<|>);Set(menu,replace,Choose,File info<|>);
CFG - [ModeEnd] FILES
CFG - [Mode] TXT
CFG - Back = Set(text,close<|>);SetMode(LIST<|>);
CFG - [ModeEnd] TXT
CFG - [Mode] LIST
CFG - Choose(Dmesg output) = ExecAndSet(text,replace,Dmesg output<|>,dmesg|tail -50);SetMode(TXT<|>);
CFG - Choose(User Processes) = SetMode(PROCS<|>);
CFG - Choose(File List) = SetMode(FILES<|>);
CFG - Choose(Uptime) = Set(list,close<|>);ExecAndSet(title<|>,uptime|tr -s ' '|cut -d ' ' -f 3,4,5);SetMode(default<|>);
CFG - Choose(Stop Top) = CancelTimer(t1<|>);
CFG - Choose(Run Top) = Timer(t1,5,0,text,replace,top<|>,top -bn 1|head -10|tr -s ' '|cut -f 2,3,10,13 -d ' '|tail -5);SetMode(TXT<|>);
CFG - Choose(Disk free space) = ExecAndSet(text,replace,Free Space<|>,df -kl|tr -s ' '|cut -f 1,4 -d ' ');SetMode(TXT<|>);
CFG - Back($$) = Set(list,close<|>);SetMode(default<|>);
CFG - (EnterMode) = Set(list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output<|>);Set(menu,replace,Choose<|>);
CFG - [ModeEnd] LIST
CFG - [Mode] default
CFG - 0 = Exit<|>;
CFG - 1 = SetMode(LIST<|>);
CFG - Back = Set(text,close<|>);
CFG - * * = Set(text,replace,Help,Just press buttons and inspect results<|>);
CFG - (Connect) = ExecAndSet(status<|>,uname -n);ExecAndSet(title<|>,whoami);Set(icons,ADMIN,1,plus,2,default,3,defaul t,4,default,5,default,6,default,7,default,8,defaul t,9,default,*,default,0,exit,#,default<|>);
CFG - Cancel = Exit<|>;
CFG - [ModeEnd] default
CFG - [Aliases]
CFG - Key 69 aliased to Cancel
CFG - Key -8 aliased to Cancel
CFG - Key -11 aliased to Cancel
CFG - [End]
CFG - [Alarms]
CFG - [End]
CFG - [Parameters]
CFG - AutoRepeat No
CFG - Debug Yes
CFG - Device bluetooth:10
CFG - Log Yes
CFG - Max Text Size 18
CFG - Retry Sec 5
CFG - Screen Menu Yes
CFG - [End]
[Thu Aug 9 13:40:51 2007] - DEBUG - mainRoutine
[Thu Aug 9 13:40:51 2007] - INFO - openPort()
[Thu Aug 9 13:40:51 2007] - DEBUG - Bluetooth Sockets Server mode. Use channel 10
[Thu Aug 9 13:40:51 2007] - INFO - registered SP for channel 10
[Thu Aug 9 13:40:51 2007] - DEBUG - findItem()
[Thu Aug 9 13:40:51 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:40:51 2007] - INFO - No command on init

[Thu Aug 9 13:40:51 2007] - DEBUG - initPort
[Thu Aug 9 13:40:51 2007] - INFO - Server mode: Waiting connection
[Thu Aug 9 13:40:51 2007] - INFO - listenAndAcceptSocketConn
[Thu Aug 9 13:40:58 2007] - INFO - listenAndAcceptSocketConn: accepted
[Thu Aug 9 13:40:58 2007] - DEBUG - findItem()
[Thu Aug 9 13:40:58 2007] - INFO - Exec cmd on connect
[Thu Aug 9 13:40:58 2007] - DEBUG - handleCmdByKey() >(Connect)<
[Thu Aug 9 13:40:58 2007] - DEBUG - getCommand for >(Connect)<
[Thu Aug 9 13:40:58 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:40:58 2007] - DEBUG - Process next command status
[Thu Aug 9 13:40:58 2007] - INFO - processOneCommand >status< >uname -n< >1<
[Thu Aug 9 13:40:58 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:40:58 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:40:58 2007] - INFO - substParams >uname -n<
[Thu Aug 9 13:40:58 2007] - INFO - execSimpleCmd >uname -n<
[Thu Aug 9 13:40:58 2007] - INFO - Close port in child
[Thu Aug 9 13:40:58 2007] - INFO - closeSocketPort
[Thu Aug 9 13:40:58 2007] - INFO - substParams >status<
[Thu Aug 9 13:40:58 2007] - DEBUG - readResultsFile >14<
[Thu Aug 9 13:40:58 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:40:58 2007] - DEBUG - ID_SET
[Thu Aug 9 13:40:58 2007] - DEBUG - sendData() >27<
[Thu Aug 9 13:40:58 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:40:58 2007] - DEBUG - Set(status,ZuzuPC-ubuntu
);
[Thu Aug 9 13:40:58 2007] - INFO - writeSocketConn 27 bytes
[Thu Aug 9 13:40:58 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:40:58 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:40:58 2007] - DEBUG - Process next command title
[Thu Aug 9 13:40:58 2007] - INFO - processOneCommand >title< >whoami< >1<
[Thu Aug 9 13:40:58 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:40:58 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:40:58 2007] - INFO - substParams >whoami<
[Thu Aug 9 13:40:58 2007] - INFO - execSimpleCmd >whoami<
[Thu Aug 9 13:40:58 2007] - INFO - Close port in child
[Thu Aug 9 13:40:58 2007] - INFO - closeSocketPort
[Thu Aug 9 13:40:58 2007] - INFO - substParams >title<
[Thu Aug 9 13:40:58 2007] - DEBUG - readResultsFile >10<
[Thu Aug 9 13:40:58 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:40:58 2007] - DEBUG - ID_SET
[Thu Aug 9 13:40:58 2007] - DEBUG - sendData() >22<
[Thu Aug 9 13:40:58 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:40:58 2007] - DEBUG - Set(title,zuzuzzzip
);
[Thu Aug 9 13:40:58 2007] - INFO - writeSocketConn 22 bytes
[Thu Aug 9 13:40:58 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:40:58 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:40:58 2007] - DEBUG - Process next command icons,ADMIN,1,plus,2,default,3,default,4,default,5 ,default,6,default,7,default,8,default,9,default,* ,default,0,exit,#,default
[Thu Aug 9 13:40:58 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:40:58 2007] - INFO - substParams >icons,ADMIN,1,plus,2,default,3,default,4,default,5 ,default,6,default,7,default,8,default,9,default,* ,default,0,exit,#,default<
[Thu Aug 9 13:40:58 2007] - INFO - Command: Set
[Thu Aug 9 13:40:58 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:40:58 2007] - DEBUG - Set(icons,ADMIN,1,plus,2,default,3,default,4,defau lt,5,default,6,default,7,default,8,default,9,defau lt,*,default,0,exit,#,default);
[Thu Aug 9 13:40:58 2007] - INFO - writeSocketConn 131 bytes
[Thu Aug 9 13:40:58 2007] - INFO - Start event forwarding
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(status)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(status)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() ZuzuPC-ubuntu)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() ZuzuPC-ubuntu)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() zuzuzzzip)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() zuzuzzzip)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(icons)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(icons)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() ADMIN)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() ADMIN)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 1)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 1)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() plus)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() plus)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 2)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 2)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 3)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 3)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 4)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 4)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 5)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 5)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 6)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 6)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 7)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 7)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 8)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 8)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 9)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 9)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() *)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() *)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 0)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 0)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() exit)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() exit)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() #)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() #)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() default)<
[Thu Aug 9 13:41:00 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:00 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:04 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 1,1<
[Thu Aug 9 13:41:04 2007] - DEBUG - handle_command() >+CKEV: 1,1<
[Thu Aug 9 13:41:04 2007] - DEBUG - Button down event
[Thu Aug 9 13:41:04 2007] - DEBUG - handle_key_press() >1<
[Thu Aug 9 13:41:04 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:04 2007] - DEBUG - handleCmdByKey() >1<
[Thu Aug 9 13:41:04 2007] - DEBUG - getCommand for >1<
[Thu Aug 9 13:41:04 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:04 2007] - DEBUG - Process next command LIST
[Thu Aug 9 13:41:04 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:04 2007] - INFO - substParams >LIST<
[Thu Aug 9 13:41:04 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:04 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:04 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:04 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:04 2007] - DEBUG - setMode() to LIST
[Thu Aug 9 13:41:04 2007] - DEBUG - findMode() LIST = LIST
[Thu Aug 9 13:41:04 2007] - DEBUG - setMode() new mode was set to LIST
[Thu Aug 9 13:41:04 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:04 2007] - DEBUG - Exec cmd on enter to mode
[Thu Aug 9 13:41:04 2007] - DEBUG - handleCmdByKey() >(EnterMode)<
[Thu Aug 9 13:41:04 2007] - DEBUG - getCommand for >(EnterMode)<
[Thu Aug 9 13:41:04 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:04 2007] - DEBUG - Process next command list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output
[Thu Aug 9 13:41:04 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:04 2007] - INFO - substParams >list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output<
[Thu Aug 9 13:41:04 2007] - INFO - Command: Set
[Thu Aug 9 13:41:04 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:04 2007] - DEBUG - Set(list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output);
[Thu Aug 9 13:41:04 2007] - INFO - writeSocketConn 116 bytes
[Thu Aug 9 13:41:04 2007] - DEBUG - Process next command menu,replace,Choose
[Thu Aug 9 13:41:04 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:04 2007] - INFO - substParams >menu,replace,Choose<
[Thu Aug 9 13:41:04 2007] - INFO - Command: Set
[Thu Aug 9 13:41:04 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:04 2007] - DEBUG - Set(menu,replace,Choose);
[Thu Aug 9 13:41:04 2007] - INFO - writeSocketConn 25 bytes
[Thu Aug 9 13:41:04 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:04 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:05 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:05 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:09 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Choose(4,Uptime)<
[Thu Aug 9 13:41:09 2007] - DEBUG - handle_command() >Msg:Choose(4,Uptime)<
[Thu Aug 9 13:41:09 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:09 2007] - DEBUG - handle_key_press() >Choose(4,Uptime)<
[Thu Aug 9 13:41:09 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:09 2007] - DEBUG - Parametrized command parsed as >Choose< >4< >Uptime<
[Thu Aug 9 13:41:09 2007] - DEBUG - Found exact (explicitly specified by value) parametrized command
[Thu Aug 9 13:41:09 2007] - DEBUG - handleCmdByKey() >Choose(Uptime)<
[Thu Aug 9 13:41:09 2007] - DEBUG - getCommand for >Choose(Uptime)<
[Thu Aug 9 13:41:09 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:09 2007] - DEBUG - Process next command list,close
[Thu Aug 9 13:41:09 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:09 2007] - INFO - substParams >list,close<
[Thu Aug 9 13:41:09 2007] - INFO - Command: Set
[Thu Aug 9 13:41:09 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:09 2007] - DEBUG - Set(list,close);
[Thu Aug 9 13:41:09 2007] - INFO - writeSocketConn 16 bytes
[Thu Aug 9 13:41:09 2007] - DEBUG - Process next command title
[Thu Aug 9 13:41:09 2007] - INFO - processOneCommand >title< >uptime|tr -s ' '|cut -d ' ' -f 3,4,5< >1<
[Thu Aug 9 13:41:09 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:41:09 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:41:09 2007] - INFO - substParams >uptime|tr -s ' '|cut -d ' ' -f 3,4,5<
[Thu Aug 9 13:41:09 2007] - INFO - execSimpleCmd >uptime|tr -s ' '|cut -d ' ' -f 3,4,5<
[Thu Aug 9 13:41:09 2007] - INFO - Close port in child
[Thu Aug 9 13:41:09 2007] - INFO - closeSocketPort
[Thu Aug 9 13:41:09 2007] - INFO - substParams >title<
[Thu Aug 9 13:41:09 2007] - DEBUG - readResultsFile >11<
[Thu Aug 9 13:41:09 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:41:09 2007] - DEBUG - ID_SET
[Thu Aug 9 13:41:09 2007] - DEBUG - sendData() >23<
[Thu Aug 9 13:41:09 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:09 2007] - DEBUG - Set(title,up 14 min,
);
[Thu Aug 9 13:41:09 2007] - INFO - writeSocketConn 23 bytes
[Thu Aug 9 13:41:09 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:41:09 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:41:09 2007] - DEBUG - Process next command default
[Thu Aug 9 13:41:09 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:09 2007] - INFO - substParams >default<
[Thu Aug 9 13:41:09 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:09 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:09 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:09 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:09 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:09 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:09 2007] - DEBUG - setMode() to default
[Thu Aug 9 13:41:09 2007] - DEBUG - findMode() default = default
[Thu Aug 9 13:41:09 2007] - DEBUG - setMode() new mode was set to default
[Thu Aug 9 13:41:09 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:09 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:09 2007] - DEBUG - Entered to mode
[Thu Aug 9 13:41:09 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:09 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() up 14 min,)<
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() up 14 min,)<
[Thu Aug 9 13:41:10 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:10 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:14 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 1,1<
[Thu Aug 9 13:41:14 2007] - DEBUG - handle_command() >+CKEV: 1,1<
[Thu Aug 9 13:41:14 2007] - DEBUG - Button down event
[Thu Aug 9 13:41:14 2007] - DEBUG - handle_key_press() >1<
[Thu Aug 9 13:41:14 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:14 2007] - DEBUG - handleCmdByKey() >1<
[Thu Aug 9 13:41:14 2007] - DEBUG - getCommand for >1<
[Thu Aug 9 13:41:14 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:14 2007] - DEBUG - Process next command LIST
[Thu Aug 9 13:41:14 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:14 2007] - INFO - substParams >LIST<
[Thu Aug 9 13:41:14 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:14 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:14 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:14 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:14 2007] - DEBUG - setMode() to LIST
[Thu Aug 9 13:41:14 2007] - DEBUG - findMode() LIST = LIST
[Thu Aug 9 13:41:14 2007] - DEBUG - setMode() new mode was set to LIST
[Thu Aug 9 13:41:14 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:14 2007] - DEBUG - Exec cmd on enter to mode
[Thu Aug 9 13:41:14 2007] - DEBUG - handleCmdByKey() >(EnterMode)<
[Thu Aug 9 13:41:14 2007] - DEBUG - getCommand for >(EnterMode)<
[Thu Aug 9 13:41:14 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:14 2007] - DEBUG - Process next command list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output
[Thu Aug 9 13:41:14 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:14 2007] - INFO - substParams >list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output<
[Thu Aug 9 13:41:14 2007] - INFO - Command: Set
[Thu Aug 9 13:41:14 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:14 2007] - DEBUG - Set(list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output);
[Thu Aug 9 13:41:14 2007] - INFO - writeSocketConn 116 bytes
[Thu Aug 9 13:41:14 2007] - DEBUG - Process next command menu,replace,Choose
[Thu Aug 9 13:41:14 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:14 2007] - INFO - substParams >menu,replace,Choose<
[Thu Aug 9 13:41:14 2007] - INFO - Command: Set
[Thu Aug 9 13:41:14 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:14 2007] - DEBUG - Set(menu,replace,Choose);
[Thu Aug 9 13:41:14 2007] - INFO - writeSocketConn 25 bytes
[Thu Aug 9 13:41:14 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:14 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 1,0<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >+CKEV: 1,0<
[Thu Aug 9 13:41:15 2007] - DEBUG - Button up event
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:15 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:15 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:17 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Choose(1,Disk free space)<
[Thu Aug 9 13:41:17 2007] - DEBUG - handle_command() >Msg:Choose(1,Disk free space)<
[Thu Aug 9 13:41:17 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:17 2007] - DEBUG - handle_key_press() >Choose(1,Disk free space)<
[Thu Aug 9 13:41:17 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:17 2007] - DEBUG - Parametrized command parsed as >Choose< >1< >Disk free space<
[Thu Aug 9 13:41:17 2007] - DEBUG - Found exact (explicitly specified by value) parametrized command
[Thu Aug 9 13:41:17 2007] - DEBUG - handleCmdByKey() >Choose(Disk free space)<
[Thu Aug 9 13:41:17 2007] - DEBUG - getCommand for >Choose(Disk free space)<
[Thu Aug 9 13:41:17 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:17 2007] - DEBUG - Process next command text,replace,Free Space
[Thu Aug 9 13:41:17 2007] - INFO - processOneCommand >text,replace,Free Space< >df -kl|tr -s ' '|cut -f 1,4 -d ' '< >1<
[Thu Aug 9 13:41:17 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:41:17 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:41:17 2007] - INFO - substParams >df -kl|tr -s ' '|cut -f 1,4 -d ' '<
[Thu Aug 9 13:41:17 2007] - INFO - execSimpleCmd >df -kl|tr -s ' '|cut -f 1,4 -d ' '<
[Thu Aug 9 13:41:17 2007] - INFO - Close port in child
[Thu Aug 9 13:41:17 2007] - INFO - closeSocketPort
[Thu Aug 9 13:41:18 2007] - INFO - substParams >text,replace,Free Space<
[Thu Aug 9 13:41:18 2007] - DEBUG - readResultsFile >216<
[Thu Aug 9 13:41:18 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:41:18 2007] - DEBUG - ID_SET
[Thu Aug 9 13:41:18 2007] - DEBUG - sendData() >246<
[Thu Aug 9 13:41:18 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:18 2007] - DEBUG - Set(text,replace,Free Space,Filesystem Available
/dev/sda4 32031092
varrun 1030264
varlock 1030364
procbususb 1030224
udev 1030224
devshm 1030364
lrm 991392
/dev/sda1 183257300
/dev/sdb1 6963840
/dev/sdc1 11087344
/dev/hdb1 28621760
/dev/hda 0
);
[Thu Aug 9 13:41:18 2007] - INFO - writeSocketConn 246 bytes
[Thu Aug 9 13:41:18 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:41:18 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:41:18 2007] - DEBUG - Process next command TXT
[Thu Aug 9 13:41:18 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:18 2007] - INFO - substParams >TXT<
[Thu Aug 9 13:41:18 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:18 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:18 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:18 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:18 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:18 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:18 2007] - DEBUG - setMode() to TXT
[Thu Aug 9 13:41:18 2007] - DEBUG - findMode() TXT = TXT
[Thu Aug 9 13:41:18 2007] - DEBUG - setMode() new mode was set to TXT
[Thu Aug 9 13:41:18 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:18 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:18 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:18 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:18 2007] - DEBUG - Entered to mode
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Free Space)<
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Free Space)<
[Thu Aug 9 13:41:18 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:18 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:19 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Filesystem Available
/dev/sda4 32031092
varrun 1030264
varlock 1030364
procbususb 1030224
udev 1030224
devshm 1030364
lrm 991392
/dev/sda1 183257300
/dev/sdb1 6963840
/dev/sdc1 11087344
/dev/hdb1 28621760
/dev/hda 0)<
[Thu Aug 9 13:41:19 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Filesystem Available
/dev/sda4 32031092
varrun 1030264
varlock 1030364
procbususb 1030224
udev 1030224
devshm 1030364
lrm 991392
/dev/sda1 183257300
/dev/sdb1 6963840
/dev/sdc1 11087344
/dev/hdb1 28621760
/dev/hda 0)<
[Thu Aug 9 13:41:19 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:19 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:28 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Back<
[Thu Aug 9 13:41:28 2007] - DEBUG - handle_command() >Msg:Back<
[Thu Aug 9 13:41:28 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:28 2007] - DEBUG - handle_key_press() >Back<
[Thu Aug 9 13:41:28 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:28 2007] - DEBUG - handleCmdByKey() >Back<
[Thu Aug 9 13:41:28 2007] - DEBUG - getCommand for >Back<
[Thu Aug 9 13:41:28 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:28 2007] - DEBUG - Process next command text,close
[Thu Aug 9 13:41:28 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:28 2007] - INFO - substParams >text,close<
[Thu Aug 9 13:41:28 2007] - INFO - Command: Set
[Thu Aug 9 13:41:28 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:28 2007] - DEBUG - Set(text,close);
[Thu Aug 9 13:41:28 2007] - INFO - writeSocketConn 16 bytes
[Thu Aug 9 13:41:28 2007] - DEBUG - Process next command LIST
[Thu Aug 9 13:41:28 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:28 2007] - INFO - substParams >LIST<
[Thu Aug 9 13:41:28 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:28 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:28 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:28 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:28 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:28 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:28 2007] - DEBUG - setMode() to LIST
[Thu Aug 9 13:41:28 2007] - DEBUG - findMode() LIST = LIST
[Thu Aug 9 13:41:28 2007] - DEBUG - setMode() new mode was set to LIST
[Thu Aug 9 13:41:28 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:28 2007] - DEBUG - Exec cmd on enter to mode
[Thu Aug 9 13:41:28 2007] - DEBUG - handleCmdByKey() >(EnterMode)<
[Thu Aug 9 13:41:28 2007] - DEBUG - getCommand for >(EnterMode)<
[Thu Aug 9 13:41:28 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:28 2007] - DEBUG - Process next command list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output
[Thu Aug 9 13:41:28 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:28 2007] - INFO - substParams >list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output<
[Thu Aug 9 13:41:28 2007] - INFO - Command: Set
[Thu Aug 9 13:41:28 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:28 2007] - DEBUG - Set(list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output);
[Thu Aug 9 13:41:28 2007] - INFO - writeSocketConn 116 bytes
[Thu Aug 9 13:41:28 2007] - DEBUG - Process next command menu,replace,Choose
[Thu Aug 9 13:41:28 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:28 2007] - INFO - substParams >menu,replace,Choose<
[Thu Aug 9 13:41:28 2007] - INFO - Command: Set
[Thu Aug 9 13:41:28 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:28 2007] - DEBUG - Set(menu,replace,Choose);
[Thu Aug 9 13:41:28 2007] - INFO - writeSocketConn 25 bytes
[Thu Aug 9 13:41:28 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:28 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:30 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:30 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:34 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Choose(7,Dmesg output)<
[Thu Aug 9 13:41:34 2007] - DEBUG - handle_command() >Msg:Choose(7,Dmesg output)<
[Thu Aug 9 13:41:34 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:34 2007] - DEBUG - handle_key_press() >Choose(7,Dmesg output)<
[Thu Aug 9 13:41:34 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:34 2007] - DEBUG - Parametrized command parsed as >Choose< >7< >Dmesg output<
[Thu Aug 9 13:41:34 2007] - DEBUG - Found exact (explicitly specified by value) parametrized command
[Thu Aug 9 13:41:34 2007] - DEBUG - handleCmdByKey() >Choose(Dmesg output)<
[Thu Aug 9 13:41:34 2007] - DEBUG - getCommand for >Choose(Dmesg output)<
[Thu Aug 9 13:41:34 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:34 2007] - DEBUG - Process next command text,replace,Dmesg output
[Thu Aug 9 13:41:34 2007] - INFO - processOneCommand >text,replace,Dmesg output< >dmesg|tail -50< >1<
[Thu Aug 9 13:41:34 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:41:34 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:41:34 2007] - INFO - substParams >dmesg|tail -50<
[Thu Aug 9 13:41:34 2007] - INFO - execSimpleCmd >dmesg|tail -50<
[Thu Aug 9 13:41:34 2007] - INFO - Close port in child
[Thu Aug 9 13:41:34 2007] - INFO - closeSocketPort
[Thu Aug 9 13:41:34 2007] - INFO - substParams >text,replace,Dmesg output<
[Thu Aug 9 13:41:34 2007] - DEBUG - readResultsFile >2865<
[Thu Aug 9 13:41:34 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:41:34 2007] - DEBUG - ID_SET
[Thu Aug 9 13:41:34 2007] - DEBUG - sendData() >2897<
[Thu Aug 9 13:41:34 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:34 2007] - DEBUG - Set(text,replace,Dmesg output,[ 54.981114] NET: Registered protocol family 17
[ 55.064786] EXT3 FS on sda4, internal journal
[ 58.629790] input: Power Button (FF) as /class/input/input4
[ 58.630047] ACPI: Power Button (FF) [PWRF]
[ 58.657789] in
[Thu Aug 9 13:41:34 2007] - INFO - writeSocketConn 2897 bytes
[Thu Aug 9 13:41:34 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:41:34 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:41:34 2007] - DEBUG - Process next command TXT
[Thu Aug 9 13:41:34 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:34 2007] - INFO - substParams >TXT<
[Thu Aug 9 13:41:34 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:34 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:34 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:34 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:34 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:34 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:34 2007] - DEBUG - setMode() to TXT
[Thu Aug 9 13:41:34 2007] - DEBUG - findMode() TXT = TXT
[Thu Aug 9 13:41:34 2007] - DEBUG - setMode() new mode was set to TXT
[Thu Aug 9 13:41:34 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:34 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:34 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:34 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:34 2007] - DEBUG - Entered to mode
[Thu Aug 9 13:41:34 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:34 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() [ 54.981114] NET: Registered protocol family 17
[ 55.064786] EXT3 FS on sda4, internal journal
[ 58.629790] input: Power Button (FF) as /class/input/input4
[ 58.630047] ACPI: Power Button (FF) [PWRF]
[ 58.657789] input: Power Button (CM) as /class/input/input5
[ 58.657830] ACPI: Power Button (CM) [PWRB]
[ 58.725711] No dock devices found.
[ 58.754473] Using specific hotkey driver
[ 58.799830] ibm_acpi: ec object not found
[ 58.855414] pcc_acpi: loading...
[)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() [ 54.981114] NET: Registered protocol family 17
[ 55.064786] EXT3 FS on sda4, internal journal
[ 58.629790] input: Power Button (FF) as /class/input/input4
[ 58.630047] ACPI: Power Button (FF) [PWRF]
[ 58.657789] input: Power Button (CM) as /class/input/input5
[ 58.657830] ACPI: Power Button (CM) [PWRB]
[ 58.725711] No dock devices found.
[ 58.754473] Using specific hotkey driver
[ 58.799830] ibm_acpi: ec object not found
[ 58.855414] pcc_acpi: loading...
[)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 59.049987] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[ 59.050073] powernow-k8: MP systems not su)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 59.049987] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[ 59.050073] powernow-k8: MP systems not su)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() pported by PSB BIOS structure
[ 59.050031] powernow-k8: MP systems not supported by PSB BIOS structure
[ 59.585267] usb-storage: device scan complete
[ 59.586511] scsi 6:0:0:0: Direct-Access WDC WD50 WD-WCANU1617017 2E07 PQ: 0 ANSI: 2 CCS
[ 59.588365] SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
[ 59.589988] sdd: Write Protect is off
[ 59.589992] sdd: Mode Sense: 00 38 00 00
[ 59.589995] sdd: assuming drive cache: write through
[ 59.596965] SCSI device sdd: 976773168 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() pported by PSB BIOS structure
[ 59.050031] powernow-k8: MP systems not supported by PSB BIOS structure
[ 59.585267] usb-storage: device scan complete
[ 59.586511] scsi 6:0:0:0: Direct-Access WDC WD50 WD-WCANU1617017 2E07 PQ: 0 ANSI: 2 CCS
[ 59.588365] SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
[ 59.589988] sdd: Write Protect is off
[ 59.589992] sdd: Mode Sense: 00 38 00 00
[ 59.589995] sdd: assuming drive cache: write through
[ 59.596965] SCSI device sdd: 976773168 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 512-byte hdwr sectors (500108 MB)
[ 59.598981] sdd: Write Protect is off
[ 59.598985] sdd: Mode Sense: 00 38 00 00
[ 59.598988] sdd: assuming drive cache: write through
[ 59.598995] sdd: sdd1 sdd2 < sdd5 >
[ 59.615825] sd 6:0:0:0: Attached scsi disk sdd
[ 59.615873] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 66.119783] ppdev: user-space parallel port driver
[ 67.382684] NET: Registered protocol family 10
[ 67.382801] lo: Disabled Privacy Extensions
[ 67.382862] ADDRCONF(NETDEV_UP):)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 512-byte hdwr sectors (500108 MB)
[ 59.598981] sdd: Write Protect is off
[ 59.598985] sdd: Mode Sense: 00 38 00 00
[ 59.598988] sdd: assuming drive cache: write through
[ 59.598995] sdd: sdd1 sdd2 < sdd5 >
[ 59.615825] sd 6:0:0:0: Attached scsi disk sdd
[ 59.615873] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 66.119783] ppdev: user-space parallel port driver
[ 67.382684] NET: Registered protocol family 10
[ 67.382801] lo: Disabled Privacy Extensions
[ 67.382862] ADDRCONF(NETDEV_UP):)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() eth)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() eth)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 1: link is not ready
[ 67.559020] Bluetooth: L2CAP ver 2.8
[ 67.559025] Bluetooth: L2CAP socket layer initialized
[ 67.565142] Bluetooth: RFCOMM socket layer initialized
[ 67.565162] Bluetooth: RFCOMM TTY layer initialized
[ 67.565165] Bluetooth: RFCOMM ver 1.8
[ 68.118179] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 68.118192] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 78.590425] ra0: no IPv6 routers present
[ 81.7<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 1: link is not ready
[ 67.559020] Bluetooth: L2CAP ver 2.8
[ 67.559025] Bluetooth: L2CAP socket layer initialized
[ 67.565142] Bluetooth: RFCOMM socket layer initialized
[ 67.565162] Bluetooth: RFCOMM TTY layer initialized
[ 67.565165] Bluetooth: RFCOMM ver 1.8
[ 68.118179] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 68.118192] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 78.590425] ra0: no IPv6 routers present
[ 81.7<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >88623] ISO 9660 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >88623] ISO 9660 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - isBemusedCommand: >88623] ISO 9660 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - Unhandled cmd 88623] ISO 9660 )
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Extensions: Microsoft Joliet Level 1
[ 81.860129] ISOFS: changing to secondary root
[ 85.393343] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 85.393354] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 95.401035] ra0: no IPv6 routers present
[ 166.920493] sky2 eth1: disabling interface
[ 167.077987] sky2 eth1: enabling interface
[ 167.079821] sky2 eth1: ram buffer 48K
[ 167.084027] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 169.472476] rt2500 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Extensions: Microsoft Joliet Level 1
[ 81.860129] ISOFS: changing to secondary root
[ 85.393343] rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 85.393354] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 95.401035] ra0: no IPv6 routers present
[ 166.920493] sky2 eth1: disabling interface
[ 167.077987] sky2 eth1: enabling interface
[ 167.079821] sky2 eth1: ram buffer 48K
[ 167.084027] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 169.472476] rt2500 )<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() EEPROM:)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() EEPROM:)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 169.472484] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 179.686341] ra0: no IPv6 routers present)<
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
[ 169.472484] rt2500 EEPROM: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 dBm Maximum
[ 179.686341] ra0: no IPv6 routers present)<
[Thu Aug 9 13:41:36 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:36 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:45 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Back<
[Thu Aug 9 13:41:45 2007] - DEBUG - handle_command() >Msg:Back<
[Thu Aug 9 13:41:45 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:45 2007] - DEBUG - handle_key_press() >Back<
[Thu Aug 9 13:41:45 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:45 2007] - DEBUG - handleCmdByKey() >Back<
[Thu Aug 9 13:41:45 2007] - DEBUG - getCommand for >Back<
[Thu Aug 9 13:41:45 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:45 2007] - DEBUG - Process next command text,close
[Thu Aug 9 13:41:45 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:45 2007] - INFO - substParams >text,close<
[Thu Aug 9 13:41:45 2007] - INFO - Command: Set
[Thu Aug 9 13:41:45 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:45 2007] - DEBUG - Set(text,close);
[Thu Aug 9 13:41:45 2007] - INFO - writeSocketConn 16 bytes
[Thu Aug 9 13:41:45 2007] - DEBUG - Process next command LIST
[Thu Aug 9 13:41:45 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:45 2007] - INFO - substParams >LIST<
[Thu Aug 9 13:41:45 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:45 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:45 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:45 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:45 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:45 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:45 2007] - DEBUG - setMode() to LIST
[Thu Aug 9 13:41:45 2007] - DEBUG - findMode() LIST = LIST
[Thu Aug 9 13:41:45 2007] - DEBUG - setMode() new mode was set to LIST
[Thu Aug 9 13:41:45 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:45 2007] - DEBUG - Exec cmd on enter to mode
[Thu Aug 9 13:41:45 2007] - DEBUG - handleCmdByKey() >(EnterMode)<
[Thu Aug 9 13:41:45 2007] - DEBUG - getCommand for >(EnterMode)<
[Thu Aug 9 13:41:45 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:45 2007] - DEBUG - Process next command list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output
[Thu Aug 9 13:41:45 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:45 2007] - INFO - substParams >list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output<
[Thu Aug 9 13:41:45 2007] - INFO - Command: Set
[Thu Aug 9 13:41:45 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:45 2007] - DEBUG - Set(list,replace,Available commands,Disk free space,Run Top,Stop Top,Uptime, User Processes,File List,Dmesg output);
[Thu Aug 9 13:41:45 2007] - INFO - writeSocketConn 116 bytes
[Thu Aug 9 13:41:45 2007] - DEBUG - Process next command menu,replace,Choose
[Thu Aug 9 13:41:45 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:45 2007] - INFO - substParams >menu,replace,Choose<
[Thu Aug 9 13:41:45 2007] - INFO - Command: Set
[Thu Aug 9 13:41:45 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:45 2007] - DEBUG - Set(menu,replace,Choose);
[Thu Aug 9 13:41:45 2007] - INFO - writeSocketConn 25 bytes
[Thu Aug 9 13:41:45 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:45 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(text)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Available commands)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Disk free space)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Run Top)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Stop Top)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Uptime)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() User Processes)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() File List)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Dmesg output)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(menu)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() replace)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Choose)<
[Thu Aug 9 13:41:47 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:47 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:52 2007] - DEBUG - -------------------- Command read -------------------- >Msg:Choose(4,Uptime)<
[Thu Aug 9 13:41:52 2007] - DEBUG - handle_command() >Msg:Choose(4,Uptime)<
[Thu Aug 9 13:41:52 2007] - DEBUG - Got event from client
[Thu Aug 9 13:41:52 2007] - DEBUG - handle_key_press() >Choose(4,Uptime)<
[Thu Aug 9 13:41:52 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:52 2007] - DEBUG - Parametrized command parsed as >Choose< >4< >Uptime<
[Thu Aug 9 13:41:52 2007] - DEBUG - Found exact (explicitly specified by value) parametrized command
[Thu Aug 9 13:41:52 2007] - DEBUG - handleCmdByKey() >Choose(Uptime)<
[Thu Aug 9 13:41:52 2007] - DEBUG - getCommand for >Choose(Uptime)<
[Thu Aug 9 13:41:52 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:52 2007] - DEBUG - Process next command list,close
[Thu Aug 9 13:41:52 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:52 2007] - INFO - substParams >list,close<
[Thu Aug 9 13:41:52 2007] - INFO - Command: Set
[Thu Aug 9 13:41:52 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:52 2007] - DEBUG - Set(list,close);
[Thu Aug 9 13:41:52 2007] - INFO - writeSocketConn 16 bytes
[Thu Aug 9 13:41:52 2007] - DEBUG - Process next command title
[Thu Aug 9 13:41:52 2007] - INFO - processOneCommand >title< >uptime|tr -s ' '|cut -d ' ' -f 3,4,5< >1<
[Thu Aug 9 13:41:52 2007] - INFO - Command: ExecAndSet
[Thu Aug 9 13:41:52 2007] - DEBUG - execCmdAndGetResults
[Thu Aug 9 13:41:52 2007] - INFO - substParams >uptime|tr -s ' '|cut -d ' ' -f 3,4,5<
[Thu Aug 9 13:41:52 2007] - INFO - execSimpleCmd >uptime|tr -s ' '|cut -d ' ' -f 3,4,5<
[Thu Aug 9 13:41:52 2007] - INFO - Close port in child
[Thu Aug 9 13:41:52 2007] - INFO - closeSocketPort
[Thu Aug 9 13:41:52 2007] - INFO - substParams >title<
[Thu Aug 9 13:41:52 2007] - DEBUG - readResultsFile >11<
[Thu Aug 9 13:41:52 2007] - DEBUG - after readResultsFile()
[Thu Aug 9 13:41:52 2007] - DEBUG - ID_SET
[Thu Aug 9 13:41:52 2007] - DEBUG - sendData() >23<
[Thu Aug 9 13:41:52 2007] - DEBUG - writeSocketConn
[Thu Aug 9 13:41:52 2007] - DEBUG - Set(title,up 15 min,
);
[Thu Aug 9 13:41:52 2007] - INFO - writeSocketConn 23 bytes
[Thu Aug 9 13:41:52 2007] - INFO - execCmdAndGetResults finished
[Thu Aug 9 13:41:52 2007] - DEBUG - Command: ExecAndSet FINISHED
[Thu Aug 9 13:41:52 2007] - DEBUG - Process next command default
[Thu Aug 9 13:41:52 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:52 2007] - INFO - substParams >default<
[Thu Aug 9 13:41:52 2007] - INFO - Command: SetMode
[Thu Aug 9 13:41:52 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:52 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:52 2007] - DEBUG - findItem() search in default
[Thu Aug 9 13:41:52 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:52 2007] - DEBUG - Leave mode
[Thu Aug 9 13:41:52 2007] - DEBUG - setMode() to default
[Thu Aug 9 13:41:52 2007] - DEBUG - findMode() default = default
[Thu Aug 9 13:41:52 2007] - DEBUG - setMode() new mode was set to default
[Thu Aug 9 13:41:52 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:52 2007] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Thu Aug 9 13:41:52 2007] - DEBUG - Entered to mode
[Thu Aug 9 13:41:52 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:52 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(list)<
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() close)<
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() Set(title)<
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- >Msg:_DEBUG_(getWord() up 15 min,)<
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() >Msg:_DEBUG_(getWord() up 15 min,)<
[Thu Aug 9 13:41:53 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:53 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:56 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 4,1<
[Thu Aug 9 13:41:56 2007] - DEBUG - handle_command() >+CKEV: 4,1<
[Thu Aug 9 13:41:56 2007] - DEBUG - Button down event
[Thu Aug 9 13:41:56 2007] - DEBUG - handle_key_press() >4<
[Thu Aug 9 13:41:56 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:56 2007] - DEBUG - findItemInMode: Item does not found
[Thu Aug 9 13:41:56 2007] - DEBUG - No approprite key definition was found by findItem()
[Thu Aug 9 13:41:56 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:56 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:56 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 4,0<
[Thu Aug 9 13:41:56 2007] - DEBUG - handle_command() >+CKEV: 4,0<
[Thu Aug 9 13:41:56 2007] - DEBUG - Button up event
[Thu Aug 9 13:41:56 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:56 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:57 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 5,1<
[Thu Aug 9 13:41:57 2007] - DEBUG - handle_command() >+CKEV: 5,1<
[Thu Aug 9 13:41:57 2007] - DEBUG - Button down event
[Thu Aug 9 13:41:57 2007] - DEBUG - handle_key_press() >5<
[Thu Aug 9 13:41:57 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:57 2007] - DEBUG - findItemInMode: Item does not found
[Thu Aug 9 13:41:57 2007] - DEBUG - No approprite key definition was found by findItem()
[Thu Aug 9 13:41:57 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:57 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:57 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 5,0<
[Thu Aug 9 13:41:57 2007] - DEBUG - handle_command() >+CKEV: 5,0<
[Thu Aug 9 13:41:57 2007] - DEBUG - Button up event
[Thu Aug 9 13:41:57 2007] - DEBUG - -------------------- Command read -------------------- ><
[Thu Aug 9 13:41:57 2007] - DEBUG - handle_command() ><
[Thu Aug 9 13:41:58 2007] - DEBUG - -------------------- Command read -------------------- >+CKEV: 0,1<
[Thu Aug 9 13:41:58 2007] - DEBUG - handle_command() >+CKEV: 0,1<
[Thu Aug 9 13:41:58 2007] - DEBUG - Button down event
[Thu Aug 9 13:41:58 2007] - DEBUG - handle_key_press() >0<
[Thu Aug 9 13:41:58 2007] - DEBUG - findItem()
[Thu Aug 9 13:41:58 2007] - DEBUG - handleCmdByKey() >0<
[Thu Aug 9 13:41:58 2007] - DEBUG - getCommand for >0<
[Thu Aug 9 13:41:58 2007] - DEBUG - ready to execute command
[Thu Aug 9 13:41:58 2007] - DEBUG - Process next command NULL parameters
[Thu Aug 9 13:41:58 2007] - INFO - processOneCommand>no exec params< >1<
[Thu Aug 9 13:41:58 2007] - INFO - Exit key detected
[Thu Aug 9 13:41:58 2007] - INFO - Finish events forwarding
[Thu Aug 9 13:41:58 2007] - INFO - closeSocketPort
[Thu Aug 9 13:41:58 2007] - DEBUG - Return code from processOneCommand() is 3
[Thu Aug 9 13:41:58 2007] - DEBUG - Abort or disconnect after processOneCommand()
[Thu Aug 9 13:41:58 2007] - DEBUG - handleCmdByKey() EXIT_ABORT || EXIT_DISCON
[Thu Aug 9 13:41:58 2007] - DEBUG - handle_key_press EXIT_ABORT || EXIT_DISCON
[Thu Aug 9 13:41:58 2007] - DEBUG - mainRoutine
[Thu Aug 9 13:41:58 2007] - DEBUG - freeTimers()
[Thu Aug 9 13:41:58 2007] - DEBUG - freeCfg()
[Thu Aug 9 13:41:58 2007] - DEBUG - freeCfg() OK

mike_mike

August 9th, 2007, 01:23 PM

2 zuzuzzzip:
So, does adminExample.cfg works for You ?
According to logs it should works :-)
If so, just use cfg-examples/Server-mode/rhytmbox.cfg to control rhytmbox

zuzuzzzip

August 9th, 2007, 01:32 PM

omg this is realy GREAT!
Thanks man! Keep up the good work :D

(the problem was i looked over rhythmbox.cfg, stupid me :$)

mike_mike

August 27th, 2007, 05:52 AM

Good news !

There is an repository for kubuntu 7.04 i386 with debian packages for kAnyRemote http://jerrad.tuxfamily.org/repo_eng.html

markp1989

September 1st, 2007, 01:09 AM

Thankyou so much, i been looking for somthing like this for a very long time

tried it on 2 phones, workes perfectly with motorola L7, but doesnt work with the L6

jusmurph

September 1st, 2007, 06:36 AM

This is sweet...

koshari

October 24th, 2007, 01:28 AM

ok trying to build a deb for 7.10 using the 3.04anyremote source,

and come up with this,

deps/btio.Tpo -c -o btio.o btio.c
btio.c:38:33: error: bluetooth/bluetooth.h: No such file or directory
btio.c:39:30: error: bluetooth/rfcomm.h: No such file or directory
btio.c: In function ‘openSocketPort’:
btio.c:314: error: storage size of ‘bt_addr’ isn’t known
btio.c:334: error: ‘BTPROTO_RFCOMM’ undeclared (first use in this function)
btio.c:334: error: (Each undeclared identifier is reported only once
btio.c:334: error: for each function it appears in.)
btio.c:370: error: ‘BDADDR_ANY’ undeclared (first use in this function)
btio.c:314: warning: unused variable ‘bt_addr’
btio.c: In function ‘listenAndAcceptSocketConn’:
btio.c:416: error: storage size of ‘bt_addr’ isn’t known
btio.c:417: error: ‘bdaddr_t’ undeclared (first use in this function)
btio.c:417: error: expected ‘;’ before ‘ba’
btio.c:469: warning: implicit declaration of function ‘baswap’
btio.c:469: error: ‘ba’ undeclared (first use in this function)
btio.c:471: warning: implicit declaration of function ‘batostr’
btio.c:471: warning: format ‘%s’ expects type ‘char *’, but argument 3 has type ‘int’
btio.c:416: warning: unused variable ‘bt_addr’
make[1]: *** [btio.o] Error 1
make[1]: Leaving directory `/home/user/anyremote-3.4/src'
make: *** [install-recursive] Error 1

i just realised i got this because i dint have the libbluetoothdev installed.

mike_mike

November 20th, 2007, 12:55 PM

Debian packages are available now at anyremote.sf.net

myharshdesigner

November 21st, 2007, 11:58 AM

Cool Topic Thanks :)

markp1989

December 2nd, 2007, 12:13 AM

how do i found out which /dev/ is my bluetooth device?

mike_mike

December 13th, 2007, 09:54 AM

See /etc/bluetooth/rfcomm.conf
There should be description of all /dev/rfcomm's

If there is no appropriate rfcomm You have to add it by Youself
(see man hciconfig, hcitool, sdptool)

Also, it is possible to create /dev/rfcommX by one command:
rfcomm bind <params>
(see man rfcomm)

brickZA

December 15th, 2007, 04:34 AM

Hi,

I'm trying to use anyremote, but I can't figure out how to upload the app to my phone. Been bashing my head for hours, doing BT transfers and also downloading from the web.

I have a Nokia 6230i, how can I get the java app installed on it? I don't have windows, so is there a way to do it under Ubuntu/ 7.10 i386?

I have tried the following:

1) Upload anyRemote.jar and anyRemote.jad through obex:// in nautilus to the phone. I can see the file on the phone in the file browser, but I can't figure out how to run/install it

2) Used the "send java to phone" button in ganyremote. My phone receives a bluetooth message containing anyRemote.jar but doesn't know what to do with it

3) Download anyRemote.jar directly by entering the URL in the phone webbrowser

I may have tried other things too, none of which were successful ;P

Thanks
Neilen

b4d

December 16th, 2007, 09:54 PM

how do i found out which /dev/ is my bluetooth device?

I put "bluetooth:10" for device and it works (without the ")

How can the look of screen on phone be changed, mine allways looks like it's for music player control...

b4d

December 17th, 2007, 01:09 AM

Okay, I've got to the point where I understand the cfg files and I've hacked my amarok.cfg, so now it shows some volume and status info on the phone...

Nicke2

December 18th, 2007, 09:01 PM

The link to the "howto" on making your own config files seems to be dead. Does anyone care to share their repository of cfgs and/or give some sort of short introduction for those of us who want to learn to make our own ? :D

b4d

December 19th, 2007, 03:14 PM

Download the source package, in there you'll find some default cfg's, you can take a look at them, and start to modify so they suit your needs. If you have any questions, just ask :)

Fab

December 29th, 2007, 05:46 PM

Okay, I used the debs from the sourceforge site and had no problem sending the jar to my phone (a motorola krzr k1) and installing it.. now I used the following procedure to start anyremote (not sure if it's the proper way?)

make phone discoverable for one minute
start anyremote with config file on computer
start client on phone, connect to computer (works with most configs..)

and that's where the trouble starts.. with some configs, I can't do anything at all.. with some, I can press one button (ie mpd/amarok stop), but then it says disconnected in the terminal, while the phone is still believing to be connected (ie has the options disconnect and exit, and I can still navigate the control buttons, but nothing happens anymore). If I disconnect or exit, I can't connect again until I repeat the whole procedure..

Any hints? I'll try to provide logs if necessary, right now the pc in question doesn't have net access..

Fab

December 30th, 2007, 11:48 AM

Okay, I tried again with AT-mode, all the test commands described in the documentation worked flawlessly. I tried to run anyremote with the mpd.cfg for at-mode, didn't work, then I realized it says "Status: Broken" in the cfg file and tried again, this time with mouse.cfg. Didn't work either, same error. Here is the log.

CFG - [Mode] default
CFG - Hash = Exec(<|>xte 'mouseclick 1' 'usleep 1000' 'mouseclick 1');
CFG - 0 = Exec(<|>xte 'key space');
CFG - 9 = Exec(<|>xte 'mouseclick 5');
CFG - 8 = Exec(<|>xte 'mousermove 0 10');
CFG - 7 = Exec(<|>xte 'mouseclick 4');
CFG - 6 = Exec(<|>xte 'mousermove 10 0');
CFG - 5 = Exec(<|>xte 'mousermove 0 -10');
CFG - 4 = Exec(<|>xte 'mousermove -10 0');
CFG - 3 = Exec(<|>xte 'mouseclick 3');
CFG - 2 = Exec(<|>xte 'mouseclick 2');
CFG - 1 = Exec(<|>xte 'mouseclick 1');
CFG - Star Star = Exec(<|>echo 'F="$HOME/.anyRemote/anyrem.hlp";echo "1 - Left Click 2 - CenterClick 3 - RightClick" > $F;echo "4 - Move Left 5 - MoveUp 6 - MoveRight" >> $F;echo "7 - Wheel Up 8 - Move Down 9 - Wheel Down" >> $F;echo " 0 - Space # - Left DblClick" >> $F;kdialog -passivepopup "`cat $F`" 7' |bash -f -s);
CFG - Cancel = Exit<|>;
CFG - Answer = TempDisconnect<|>;
CFG - (Init) = Exec(<|>echo 'P=`which xte|grep xte|grep -v not|wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x1" ]; then true; else $M "ERROR: xautomation package is not installed"; fi'|bash -f -s);
CFG - [ModeEnd] default
CFG - [Aliases]
CFG - Key POWER aliased to #
CFG - Key TEXT aliased to *
CFG - Key 57 aliased to 9
CFG - Key 56 aliased to 8
CFG - Key 55 aliased to 7
CFG - Key 54 aliased to 6
CFG - Key 53 aliased to 5
CFG - Key 52 aliased to 4
CFG - Key 51 aliased to 3
CFG - Key 50 aliased to 2
CFG - Key 49 aliased to 1
CFG - Key 48 aliased to 0
CFG - Key 35 aliased to Hash
CFG - Key # aliased to Hash
CFG - Key 42 aliased to Star
CFG - Key * aliased to Star
CFG - Key 69 aliased to Cancel
CFG - Key 83 aliased to Answer
CFG - Key p aliased to Cancel
CFG - Key L aliased to Cancel
CFG - Key c aliased to Answer
CFG - Key E aliased to Cancel
CFG - Key S aliased to Answer
CFG - [End]
CFG - [Alarms]
CFG - [End]
CFG - [Parameters]
CFG - AutoConnect No
CFG - AutoRepeat Yes
CFG - CMER On Will be determined automatically
CFG - CMER Off Will be determined automatically
CFG - Debug Yes
CFG - Device /dev/rfcomm0
CFG - Log Yes
CFG - Retry Sec 5
CFG - Screen Menu No
CFG - To Main Menu E for Motorola
CFG - [End]
[Sun Dec 30 12:04:15 2007] - DEBUG - mainRoutine
[Sun Dec 30 12:04:15 2007] - INFO - openPort()
[Sun Dec 30 12:04:15 2007] - DEBUG - Serial Client mode. Use device /dev/rfcomm0
[Sun Dec 30 12:04:18 2007] - DEBUG - findItem()
[Sun Dec 30 12:04:18 2007] - DEBUG - findItemInMode >default,(Init)<
[Sun Dec 30 12:04:18 2007] - DEBUG - findItem() after findItemInMode
[Sun Dec 30 12:04:18 2007] - DEBUG - findItem() EXIT
[Sun Dec 30 12:04:18 2007] - INFO - Exec cmd on init
[Sun Dec 30 12:04:18 2007] - DEBUG - handleCmdByKey() >(Init)<
[Sun Dec 30 12:04:18 2007] - DEBUG - getCommand for >(Init)<
[Sun Dec 30 12:04:18 2007] - DEBUG - ready to execute command
[Sun Dec 30 12:04:18 2007] - DEBUG - Process next command NULL parameters
[Sun Dec 30 12:04:18 2007] - INFO - processOneCommand>no description< >1<
[Sun Dec 30 12:04:18 2007] - INFO - Command: Exec
[Sun Dec 30 12:04:18 2007] - INFO - substParams >echo 'P=`which xte|grep xte|grep -v not|wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x1" ]; then true; else $M "ERROR: xautomation package is not installed"; fi'|bash -f -s<
[Sun Dec 30 12:04:18 2007] - INFO - execSimpleCmd >echo 'P=`which xte|grep xte|grep -v not|wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x1" ]; then true; else $M "ERROR: xautomation package is not installed"; fi'|bash -f -s<
[Sun Dec 30 12:04:18 2007] - INFO - Close port in child
[Sun Dec 30 12:04:18 2007] - DEBUG - initPort
[Sun Dec 30 12:04:18 2007] - DEBUG - ATZ
[Sun Dec 30 12:04:18 2007] - DEBUG - ATZ

OK

[Sun Dec 30 12:04:18 2007] - DEBUG - ATE0
[Sun Dec 30 12:04:18 2007] - DEBUG - ATE0

OK

[Sun Dec 30 12:04:18 2007] - DEBUG - AT+CSCS="8859-1"
[Sun Dec 30 12:04:19 2007] - DEBUG - OK

[Sun Dec 30 12:04:19 2007] - DEBUG - AT+CLIP=1
[Sun Dec 30 12:04:19 2007] - DEBUG - ERROR

[Sun Dec 30 12:04:19 2007] - DEBUG - AT+CGMI
[Sun Dec 30 12:04:19 2007] - DEBUG - +CGMI: "Motorola CE, Copyright 2000"

OK

[Sun Dec 30 12:04:19 2007] - DEBUG - AT+MODE=2
[Sun Dec 30 12:04:19 2007] - DEBUG - OK

[Sun Dec 30 12:04:19 2007] - DEBUG - AT+CMER=3,1,0,0,0
[Sun Dec 30 12:04:19 2007] - DEBUG - +MBAN: Motorola CE, Copyright 2000
AT+CMER=3,1,0,0,0

OK

Fab

January 7th, 2008, 05:27 PM

No hints at all? :(

mike_mike

January 8th, 2008, 07:52 PM

Well, start anyremote from console with -log option:
anyremote -log -f /pathto/cfg/file
try to use it and
then send $HOME/.anyRemote/anyremote.log to anyremote@mail.ru

mike_mike

January 8th, 2008, 07:58 PM

2 Fab:
Connect to Motorila with cu or Minicom,
then enter
ATZ
AT+CMER=3,1,0,0,0
and try to press buttons on the phone.
If You did not see "+CKEV...." responces try to enter other AT+CMER=...
variants (see docs)

But i think java client should work OK on K1 :-)

mike_mike

January 8th, 2008, 07:59 PM

Send logs of server mode to anyremote@mail.ru

Fab

January 16th, 2008, 09:21 PM

I did some days ago, but got no reply so far. Did you receive my mail?

mike_mike

January 17th, 2008, 06:59 AM

No. Which subject does Your letter have ?
Anyway, please, send it again to anyremote@mail.ru

mike_mike

January 17th, 2008, 07:02 AM

By the way, i've borrowed Motorola RIZR Z3 to test.
So i believe v4.2 will fix Your issues.

Fab

January 17th, 2008, 04:42 PM

Sent again :) Subject is "anyremote ubuntuforums"

Fab

January 23rd, 2008, 08:31 PM

new log using the new version:

CFG - [Mode] PROCS
CFG - Back($$) = SetMode(LIST<|>);
CFG - Kill($$) = Exec(<|>kill `echo $(Param) | cut -d ' ' -f 1`);ExecAndSet(list,replace,SAME<|>,ps -o pid -o command -u `whoami` | tr -s ' ' | cut -d ' ' -f 1,2,3 | sed 's/$/,/' | grep -v sed | grep -v cut);
CFG - (EnterMode) = ExecAndSet(list,replace,User Processes<|>,ps -o pid -o command -u `whoami` | tr -s ' ' | cut -d ' ' -f 1,2,3 | sed 's/$/,/' | grep -v sed | grep -v cut);Set(menu,replace,Kill<|>);
CFG - [ModeEnd] PROCS
CFG - [Mode] TXT2
CFG - Back = Set(text,close<|>);SetMode(FILES<|>);
CFG - [ModeEnd] TXT2
CFG - [Mode] FILES
CFG - Back($$) = SetMode(LIST<|>);Set(list,replace,Available commands,Disk free space,Run Top, Stop Top, Uptime, User Processes, File List,Dmesg output<|>);Set(menu,replace,Choose<|>);
CFG - Choose($$) = ExecAndSet(list,replace,SAME<|>,echo 'cd `cat $HOME/.anyRemote/ar_storedir.tmp`;if [ -d $(Param) ]; then cd $(Param);fi;pwd>$HOME/.anyRemote/ar_storedir.tmp;ls -F| sed "s/$/,/"|sed "s/(/openbrace/g"|sed "s/)/closebrace/g";'|bash -f -s);Set(list,add,SAME,..<|>);
CFG - File info($$) = ExecAndSet(text,replace,File info<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;file $(Param));Set(text,add,SAME,\n<|>);ExecAndSet(text,add,File info<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;ls -l $(Param));SetMode(TXT2<|>);
CFG - (EnterMode) = ExecAndSet(list,replace,Files<|>,cd `cat $HOME/.anyRemote/ar_storedir.tmp`;echo `pwd`>$HOME/.anyRemote/ar_storedir.tmp;ls -F| sed 's/$/,/'|sed 's/(/openbrace/g'|sed 's/)/closebrace/g');Set(list,add,SAME,..<|>);Set(menu,replace,Choose,File info<|>);
CFG - [ModeEnd] FILES
CFG - [Mode] TXT
CFG - Back = Set(text,close<|>);SetMode(LIST<|>);
CFG - [ModeEnd] TXT
CFG - [Mode] LIST
CFG - Choose(Dmesg output) = ExecAndSet(text,replace,Dmesg output<|>,dmesg|tail -50);SetMode(TXT<|>);
CFG - Choose(User Processes) = SetMode(PROCS<|>);
CFG - Choose(File List) = SetMode(FILES<|>);
CFG - Choose(Uptime) = Set(list,close<|>);ExecAndSet(title<|>,uptime|tr -s ' '|cut -d ' ' -f 3,4,5);SetMode(default<|>);
CFG - Choose(Disk free space) = ExecAndSet(text,replace,Free Space<|>,df -kl|tr -s ' '|cut -f 1,4 -d ' ');SetMode(TXT<|>);
CFG - Back($$) = Set(list,close<|>);SetMode(default<|>);
CFG - (EnterMode) = Set(list,replace,Available commands,Disk free space,Uptime, User Processes,File List,Dmesg output<|>);Set(menu,replace,Choose<|>);
CFG - [ModeEnd] LIST
CFG - [Mode] default
CFG - 0 = Exit<|>;
CFG - 1 = SetMode(LIST<|>);
CFG - Back = Set(text,close<|>);
CFG - * * = Set(text,replace,Help,1 - Show list of features\n0 - Exit<|>);
CFG - (Connect) = ExecAndSet(status<|>,uname -n);ExecAndSet(title<|>,whoami);Set(icons,ADMIN,1,plus,2,default,3,defaul t,4,default,5,default,6,default,7,default,8,defaul t,9,default,*,default,0,exit,#,default<|>);
CFG - Cancel = Exit<|>;
CFG - [ModeEnd] default
CFG - [Aliases]
CFG - Key POWER aliased to #
CFG - Key TEXT aliased to *
CFG - Key 69 aliased to Cancel
CFG - Key -8 aliased to Cancel
CFG - Key -11 aliased to Cancel
CFG - [End]
CFG - [Alarms]
CFG - [End]
CFG - [Parameters]
CFG - AutoRepeat No
CFG - Device bluetooth:19
CFG - Log Yes
CFG - Retry Sec 5
CFG - Screen Menu Yes
CFG - [End]
[Wed Jan 23 20:20:16 2008] - INFO - openPort()
[Wed Jan 23 20:20:16 2008] - INFO - registered SP for channel 19
[Wed Jan 23 20:20:16 2008] - INFO - Server mode: Waiting connection
[Wed Jan 23 20:20:16 2008] - INFO - listenAndAcceptSocketConn
[Wed Jan 23 20:20:35 2008] - INFO - listenAndAcceptSocketConn: accepted
[Wed Jan 23 20:20:35 2008] - INFO - Exec cmd on connect
[Wed Jan 23 20:20:35 2008] - INFO - processOneCommand >status< >uname -n< >1<
[Wed Jan 23 20:20:35 2008] - INFO - Command: ExecAndSet
[Wed Jan 23 20:20:35 2008] - INFO - substParams >uname -n<
[Wed Jan 23 20:20:35 2008] - INFO - execSimpleCmd >uname -n<
[Wed Jan 23 20:20:35 2008] - INFO - Close port in child
[Wed Jan 23 20:20:35 2008] - INFO - closeSocketPort
[Wed Jan 23 20:20:35 2008] - INFO - substParams >status<
[Wed Jan 23 20:20:35 2008] - INFO - Data is new
[Wed Jan 23 20:20:35 2008] - INFO - writeSocketConn 17 bytes
[Wed Jan 23 20:20:35 2008] - INFO - execCmdAndGetResults finished
[Wed Jan 23 20:20:35 2008] - INFO - processOneCommand >title< >whoami< >1<
[Wed Jan 23 20:20:35 2008] - INFO - Command: ExecAndSet
[Wed Jan 23 20:20:35 2008] - INFO - substParams >whoami<
[Wed Jan 23 20:20:35 2008] - INFO - execSimpleCmd >whoami<
[Wed Jan 23 20:20:35 2008] - INFO - Close port in child
[Wed Jan 23 20:20:35 2008] - INFO - closeSocketPort
[Wed Jan 23 20:20:35 2008] - INFO - substParams >title<
[Wed Jan 23 20:20:35 2008] - INFO - Data is new
[Wed Jan 23 20:20:35 2008] - INFO - writeSocketConn 16 bytes
[Wed Jan 23 20:20:35 2008] - INFO - execCmdAndGetResults finished
[Wed Jan 23 20:20:35 2008] - INFO - processOneCommand>no exec params< >1<
[Wed Jan 23 20:20:35 2008] - INFO - substParams >icons,ADMIN,1,plus,2,default,3,default,4,default,5 ,default,6,default,7,default,8,default,9,default,* ,default,0,exit,#,default<
[Wed Jan 23 20:20:35 2008] - INFO - Command: Set
[Wed Jan 23 20:20:35 2008] - INFO - Data is new
[Wed Jan 23 20:20:35 2008] - INFO - writeSocketConn 131 bytes
[Wed Jan 23 20:20:35 2008] - INFO - Start event forwarding
[Wed Jan 23 20:20:40 2008] - INFO - processOneCommand>no exec params< >1<
[Wed Jan 23 20:20:40 2008] - INFO - substParams >LIST<
[Wed Jan 23 20:20:40 2008] - INFO - Command: SetMode
[Wed Jan 23 20:20:40 2008] - INFO - processOneCommand>no exec params< >1<
[Wed Jan 23 20:20:40 2008] - INFO - substParams >list,replace,Available commands,Disk free space,Uptime, User Processes,File List,Dmesg output<
[Wed Jan 23 20:20:40 2008] - INFO - Command: Set
[Wed Jan 23 20:20:40 2008] - INFO - Data is new
[Wed Jan 23 20:20:40 2008] - INFO - writeSocketConn 99 bytes
[Wed Jan 23 20:20:40 2008] - INFO - processOneCommand>no exec params< >1<
[Wed Jan 23 20:20:40 2008] - INFO - substParams >menu,replace,Choose<
[Wed Jan 23 20:20:40 2008] - INFO - Command: Set
[Wed Jan 23 20:20:40 2008] - INFO - Data is new
[Wed Jan 23 20:20:40 2008] - INFO - writeSocketConn 25 bytes
[Wed Jan 23 20:20:51 2008] - INFO - Got disconnected
[Wed Jan 23 20:20:51 2008] - INFO - Wait 5 seconds to connect/open server socket ...
[Wed Jan 23 20:20:56 2008] - INFO - openPort()
[Wed Jan 23 20:20:56 2008] - ERROR - socket was already opened
[Wed Jan 23 20:20:56 2008] - INFO - Server mode: Waiting connection
[Wed Jan 23 20:20:56 2008] - INFO - listenAndAcceptSocketConn
[Wed Jan 23 20:20:56 2008] - INFO - listenAndAcceptSocketConn: accepted
[Wed Jan 23 20:20:56 2008] - INFO - Exec cmd on connect
[Wed Jan 23 20:20:56 2008] - INFO - processOneCommand >status< >uname -n< >1<
[Wed Jan 23 20:20:56 2008] - INFO - Command: ExecAndSet
[Wed Jan 23 20:20:56 2008] - INFO - substParams >uname -n<
[Wed Jan 23 20:20:56 2008] - INFO - execSimpleCmd >uname -n<
[Wed Jan 23 20:20:56 2008] - INFO - Close port in child
[Wed Jan 23 20:20:56 2008] - INFO - closeSocketPort
[Wed Jan 23 20:20:56 2008] - INFO - substParams >status<
[Wed Jan 23 20:20:56 2008] - INFO - Data is new
[Wed Jan 23 20:20:56 2008] - INFO - writeSocketConn 17 bytes
[Wed Jan 23 20:20:56 2008] - INFO - execCmdAndGetResults finished
[Wed Jan 23 20:20:56 2008] - INFO - processOneCommand >title< >whoami< >1<
[Wed Jan 23 20:20:56 2008] - INFO - Command: ExecAndSet
[Wed Jan 23 20:20:56 2008] - INFO - substParams >whoami<
[Wed Jan 23 20:20:56 2008] - INFO - execSimpleCmd >whoami<
[Wed Jan 23 20:20:56 2008] - INFO - Close port in child
[Wed Jan 23 20:20:56 2008] - INFO - closeSocketPort
[Wed Jan 23 20:20:56 2008] - INFO - substParams >title<
[Wed Jan 23 20:20:56 2008] - INFO - Data is new
[Wed Jan 23 20:20:56 2008] - INFO - writeSocketConn 16 bytes
[Wed Jan 23 20:20:56 2008] - INFO - execCmdAndGetResults finished
[Wed Jan 23 20:20:56 2008] - INFO - processOneCommand>no exec params< >1<
[Wed Jan 23 20:20:56 2008] - INFO - substParams >icons,ADMIN,1,plus,2,default,3,default,4,default,5 ,default,6,default,7,default,8,default,9,default,* ,default,0,exit,#,default<
[Wed Jan 23 20:20:56 2008] - INFO - Command: Set
[Wed Jan 23 20:20:56 2008] - INFO - Data is new
[Wed Jan 23 20:20:56 2008] - INFO - writeSocketConn 131 bytes
[Wed Jan 23 20:20:56 2008] - INFO - Start event forwarding
[Wed Jan 23 20:21:01 2008] - INFO - writeSocketConn 16 bytes
[Wed Jan 23 20:21:01 2008] - INFO - Got disconnected
[Wed Jan 23 20:21:01 2008] - INFO - Got signal, exiting
[Wed Jan 23 20:21:01 2008] - INFO - closeSocketPort

same problems as before :/

mike_mike

January 25th, 2008, 02:42 PM

Fab,
1. have You tested AT mode ?
2. have You tried JamSE ?

mike_mike

January 25th, 2008, 02:45 PM

Fab,
thanks You for logs...
By the way, after anyRemote had connected to RIZR, did You saw
output of "uname -n" and "whoami" commands on screen of cell phone ?

mike_mike

January 26th, 2008, 07:19 AM

Hello Fab,

Thank You for log on ubuntuforums. Unfortunately it does not contains much info. So i still could not get information about possible reasons of this
strange behaviour.

In common, there could be a lot of reason:
1. bugs in anyremote and java client
2. improper software configuration
3. conflict with some other software (do You have kdebluetooth running?)
4. hardware problem

I saw in the middle of the log:
>[Wed Jan 23 20:20:51 2008] - INFO - Got disconnected
>[Wed Jan 23 20:20:51 2008] - INFO - Wait 5 seconds to connect/open server socket ...
>[Wed Jan 23 20:20:56 2008] - INFO - openPort()
So, have You restarted java client or it have lost connection with another reason ?

>with some configs, I can't do anything at all.. with some, I can press one
>button (ie mpd/amarok stop), but then it says disconnected in the terminal
So, in which cases it works at least until first button is pressed ?

Well, i'm really want to help You. But in this case You need to help me
to make testing step-by-step. If You agree to spend some time in testing
contact me via e-mail (actually i visit ubuntu forums only from time to time).

mike_mike

January 26th, 2008, 07:31 AM

Actually anyRemote v4.2 works perfect on my Kubuntu 7.10 with Motorola RIZR Z3

Nonno Bassotto

January 28th, 2008, 11:12 PM

I like this app very much, but the cfg files look very scaring to edit. I'm looking for a config file to use MPD with bemused emulation. Does anybody have one?

mike_mike

January 29th, 2008, 07:27 AM

2 Nonno Bassotto:
In general You can use cfg-data/Bemused-emulation/template.cfg as a starting point.
I spent about only 5 minutes )))) to wrote mpd.cfg. But I not test yet it, so i'm not sure it will work properly.
Anyway, please, try it.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% anyremote configuration file for MPD management. (Server-mode Bemused emulation)
% Prerequisites amixer utility, Bemused client installed on cell phone
%

% STATUS stable
% XTEST no
% SOUND app
% ENV no

% Uncomment if needed
%AutoRepeat=false
%Baudrate=19200
%Device=bluetooth:19
%Log=true
Screen=true

GuiAppName=MPD
GuiAppBinary=mpc
GuiAppRun=echo 'P=`ps -ef|grep mpd|grep -v grep|grep -v anyremote|grep -v nedit|grep -v mpd.cfg`; if [ "x$P" == "x" ]; then echo NOK; else echo OK; fi' | bash -f -s
GuiAppType=Application

[Aliases]
STRT=PLAY
LADD=PLAY
STEN=STOP
[End]

[Keys]

(Init)=Macro(CheckMPC);Macro(CheckMPD);Macro(Check PL);

CheckMPC=Exec(echo 'P=`which mpc|grep mpc|grep -v not|wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x0" ]; then $M "ERROR: mpc client is not installed"; fi'|bash -f -s);
CheckMPD=Exec(echo 'P=`ps -ef|grep mpd|grep -v grep|grep -v mpd.cfg|wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x0" ]; then $M "ERROR: mpd is not run"; fi'|bash -f -s);
CheckPL =Exec(echo 'P=`mpc playlist |wc -l`; KD=`which kdialog|grep kdialog|grep -v not|wc -l`;if [ "x$KD" == "x1" ]; then M="kdialog --msgbox"; else M="xmessage"; fi; if [ "x$P" == "x0" ]; then $M "ERROR: mpd playlist is empty"; fi'|bash -f -s);

EXIT=Exec(mpd --kill)
FADE=Exec(mpc volume 0)
FFWD=Exec(mpc seek +00:00:05)
INF2=Send(string,INF2ACK);Send(bytes,128,0,0,0,128 ,0,0,0,1,0,0);ExecAndSend(string,mpc|head -1|sed "s/.*\///;s/(/-/g;s/)/-/g");Send(bytes,0,0)
INFO=Send(string,INFOACK);Send(bytes,128,0,0,0,128 ,0,0,0,1,0,0);ExecAndSend(string,mpc|head -1|sed "s/.*\///;s/(/-/g;s/)/-/g")
NEXT=Exec(mpc next)
PAUS=Exec(mpc toggle)
PLAY=Exec(mpc play)
PREV=Exec(mpc prev)
RWND=Exec(mpc seek -00:00:05)
STOP=Exec(mpc stop)
VOLM($$)=Exec(mpc volume $(Param))
%REPT
%SHFL

% The following is ditry trick. Replays are not real, just to satisfy client.
CHCK=Send(string,Y);
DINF=Send(string,DINFACK);Send(bytes,0,0,0,244,0,0 ,32,0,0,0,0,2);
DLST=Send(bytes,1);Send(string,Root);Send(bytes,0, 1,482,0)
DOWN=Send(bytes,0,100);Send(string,NoName)
FINF=Send(string,FINFACK);Send(bytes,0,0,0,100);
GVOL=Send(string,GVOLNAK)
LIST=Send(bytes,1);Send(string,Root);Send(bytes,0, 1,482,0)
PLEN=Send(bytes,0,100)
PLST=Send(string,PLSTACK);Send(bytes,0,1,35,10);Se nd(string,NoName);Send(bytes,10,0)
%SEEK=
%SLCT=
VERS=Send(string,VERSACK);Send(bytes,1,73);
[End]

mike_mike

January 29th, 2008, 07:29 AM

Beware of newlines !!!

Nonno Bassotto

January 30th, 2008, 12:50 AM

I get some connection problems when using anything but play, but I have yet to investigate if this has to do with the config file. I'll try with other bemused applications and let you know.Thank you :)

mike_mike

February 1st, 2008, 08:11 AM

I have tested config file to use MPD with bemused emulation. It works well
on my Fedora8.

jasonmeansfriend

February 8th, 2008, 06:21 PM

hi all,

just found out about this app... nice idea!

but just one problem, i researched on the internet and my phone (motorola RAZR v3t) is JSR-82 complieant.

now, everything seems fine until i go to the anyRemote app on my phone. whatever i type in that socket thing:
("comm:COM0", "socket://enter.ip.here<colon>port", "socket://bluetooth:10", "socket://bluetooth:16" (i tried all 4, i couldn't think of anything else)), i get a half-error-half-working screen.

at the top, i get a virtual "keypad" thing where i have volume controls (volume down, mute, volume up) and media controls (play/pause/next/prev/stop/etc.); at the bottom i get this error:

openConnection Exception
java.lang.SecurityException
javax.microedition.io.Connect
or.comm was denied

on the 4 lines. anyone know where i'm going wrong? i installed the deb in ubuntu gutsy and the jar file (sent to my phone thru bluetooth) in the phone.

from this screen, i can either "EXIT" or "DISCONNECT"

the "<colon>" above was ":" but to avoid a smiley face where inappropriate...

sorry if this post was too long, the prospect of having a cool remote with me was tempting... waiting for your replies... please help...

jason

Fab

February 9th, 2008, 12:23 PM

Okay, I am back again :P Completely reinstalled anyremote 4.2, connected with phone with the gnome gui, using mpd server config. I press the play button, mpd starts to play, I press another button, the phone says

openConnection Exception
javax.bluetooth.BluetoothConnectionException errno=-1

But the computer still thinks it's connected to the phone. If I press disconnect on the phone, and reconnect again (without closing anyremote on either side), it's still displaying the same screen like before I disconnected. Even if I exit the anyremote app on the phone, ganyremote still says "Connected to phone".

Another thing I noticed is that if I try to do the AT mode test from ganyremote, it says it doesn't work, with the message "Cannot get port to connect. Are the device available?" The manual test like in the docs still works, and I can see the keys I press in my terminal.

If I try a config file for AT mode, for example Mousetest, the first key press works okay, but after that it's the same like with server mode, except it doesn't display an error message :(

Also, I am using a Motorola KRZR K1, I think that is a different model than the RAZR or RIZR you were talking about.

Hello Fab,

Thank You for log on ubuntuforums. Unfortunately it does not contains much info. So i still could not get information about possible reasons of this
strange behaviour.

In common, there could be a lot of reason:
1. bugs in anyremote and java client
2. improper software configuration
3. conflict with some other software (do You have kdebluetooth running?)
4. hardware problem

I saw in the middle of the log:
>[Wed Jan 23 20:20:51 2008] - INFO - Got disconnected
>[Wed Jan 23 20:20:51 2008] - INFO - Wait 5 seconds to connect/open server socket ...
>[Wed Jan 23 20:20:56 2008] - INFO - openPort()
So, have You restarted java client or it have lost connection with another reason ?

>with some configs, I can't do anything at all.. with some, I can press one
>button (ie mpd/amarok stop), but then it says disconnected in the terminal
So, in which cases it works at least until first button is pressed ?

Well, i'm really want to help You. But in this case You need to help me
to make testing step-by-step. If You agree to spend some time in testing
contact me via e-mail (actually i visit ubuntu forums only from time to time).

I do not disconnect or restart anything, I get disconnected as soon as I try to press any button a second time (ie play, then pause -> pause causes phone to disconnect). Only bluetooth software I am running is the gnome bluetooth applet, might that be causing a conflict? I'll send you an email so you read this (maybe someone else has the same problem too..)

Regards,
Fab

mike_mike

February 10th, 2008, 10:12 PM

You need not type anything in address field if You plans to connect to anyRemote throgh bluetooth. It needs to run search instead. And then select one of items to connect to.
Anyway, in general it is possible to enter something like: btspp://00:17:E3:92:C5:33:19
(btspp://<bluetooth adddress>:19)

mike_mike

February 10th, 2008, 10:19 PM

2 Fab:
Well, situation is strange. At this moment i have no ideas why it could be.
Anyway, i have plans to borrow K1 somethere to test.

Fab

February 10th, 2008, 10:39 PM

2 Fab:
Well, situation is strange. At this moment i have no ideas why it could be.
Anyway, i have plans to borrow K1 somethere to test.

thank you for your time :)

maxehhh

February 12th, 2008, 01:50 PM

anybody tried this with a K1?

Edit: can anybody upload this to rapidshare or anywhere else? because i can't download it from sf =(

Fab

February 12th, 2008, 04:56 PM

anybody tried this with a K1?

Edit: can anybody upload this to rapidshare or anywhere else? because i can't download it from sf =(

I tried it with a K1 without success (see above). It's not yet clear wether the problem is the phone or the computer hardware.. But try yourself, maybe you have more luck than me ;)

As far as SF is concerned, try a different mirror, they should work..

maxehhh

February 12th, 2008, 06:00 PM

I tried it with a K1 without success (see above). It's not yet clear wether the problem is the phone or the computer hardware.. But try yourself, maybe you have more luck than me ;)

As far as SF is concerned, try a different mirror, they should work..

I tried but i always got redirected to SF.

btw... i have AMD64, it isn't really a problem, is it?

Edit: i finally manage to download it, but when i execute the make (after ./configure) i get this

root@bl1zzard:/home/bl1zzard/Desktop/anyremote-4.2# make
Making all in src
make[1]: Entering directory `/home/bl1zzard/Desktop/anyremote-4.2/src'
gcc -DUSE_BT=1 -DUSE_XTEST=1 -g -O2 -I/usr/local/include -Wall -D_REENTRANT -O2 -g -o anyremote atsend.o btio.o main.o cmds.o parse.o utils.o xemulate.o conf.o -lbluetooth -lXtst
/usr/bin/ld: cannot find -lXtst
collect2: ld returned 1 exit status
make[1]: *** [anyremote] Error 1
make[1]: Leaving directory `/home/bl1zzard/Desktop/anyremote-4.2/src'
make: *** [all-recursive] Error 1

mike_mike

February 13th, 2008, 07:44 AM

2 maxehhh:
It needs to install libXtst (packages libxtst libxtst-dev)
Alternatively it is possible to run ./configure --disable-xtest
but in this case it will be impossible to use mouse/keyboard emulation commands.

maxehhh

February 13th, 2008, 02:24 PM

Ok thanks, anyway i will re-install ubuntu to leave it like it were before i started with the xgl, etc. and will install this thing first.

Edit:

No candidate version found for bluez-passkey-gnome
No candidate version found for bluez-pin

Where can i get a repository for this? i tried downloading from debian.org the packages but i get and error when i try to install it by my self

root@bl1zzard:/home/bl1zzard/Desktop# dpkg -i bluez-pin_0.25-1_amd64.deb
Selecting previously deselected package bluez-pin.
(Reading database ... 89995 files and directories currently installed.)
Unpacking bluez-pin (from bluez-pin_0.25-1_amd64.deb) ...
dpkg: dependency problems prevent configuration of bluez-pin:
bluez-pin depends on dbus-1 (>= 0.23.4); however:
Package dbus-1 is not installed.
bluez-pin depends on dbus-glib-1 (>= 0.23.4); however:
Package dbus-glib-1 is not installed.
bluez-pin depends on libbluetooth1 (>= 2.15); however:
Package libbluetooth1 is not installed.
dpkg: error processing bluez-pin (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
bluez-pin

And when i try to install dbus-1 it says

root@bl1zzard:/home/bl1zzard/Desktop# apt-get install dbus-1 dbus-glib-1 libbluetooth1
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package dbus-1 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
dbus
E: Package dbus-1 has no installation candidate

mike_mike

February 14th, 2008, 07:15 AM

2 maxehhh:
Use "adept" package manager to install *deb's.

maxehhh

February 18th, 2008, 12:10 AM

2 maxehhh:
Use "adept" package manager to install *deb's.

I've already installed adept manager and when i select bluez-pin to request install it doesn't select the package for installation.

Edit: i managed it to install the bluez-passkey-gnome and now the only thing left to install it's bluez-pin.

woferon

February 18th, 2008, 12:40 PM

Hey, can you please tell me how am I supposed to connect if I wanna use usb cable ? I've installed AnyRemote from .deb, uploaded java to my K510i phone and... well, do I have to create any special cfg for usb connection? and what adress should I write on my phone to connect to ? (search function on my phone doesn't find anything). Thanks ;)

mike_mike

February 18th, 2008, 03:12 PM

2 woferon:
There is no needs to create special files for USB connection. You should play
with "-s" command line parameter instead.
Seems You want to use AT mode, am i right ???
If so, specify "-s /dev/ttySX" option to
connect to the phone (where "dev/ttySX" is normally is /dev/ttyS0, but could vary
depending of system configuration)

maxehhh

February 18th, 2008, 05:41 PM

mike_mike, i read that i don't need the bluez-pin to make the bluetooth work, the only problem i have it's that my ubuntu doesn't recognize the USB, when i unplug it, it says: Device has been removed, and when i plug it in it says the opposite, but it doesn't show the device :\

woferon

February 18th, 2008, 06:53 PM

Thanks, mike_mike, it works now :) I just have one question, is it possible to put some kind of image on my phone's screen which would help me remember which key does what ? :) Because it looks pretty bad showing only "Done." and "Connect / More" .

PS. You can add Sony Ericsson K510i to http://anyremote.sourceforge.net/devices.html as USB connection works fine. Can't test if Bluetooth / IrDA connection works as I don't have any of those ... gonna borrow bluetooth from a friend and I'll test :)

mike_mike

February 19th, 2008, 07:14 AM

2 woferon:
In AT-mode it is impossible to show images on screen of cell phone. If You will manage
to borrow bluetooth dongle somethere and if K510 supports JSR-82 .... then it will be possible
to use anyRemote in Server-mode with all eye-candys :))

stareez

February 19th, 2008, 11:58 AM

Hi,
I'm stuck at installing anyremote. Many errors about "xemulate", how to solve this?
Please help a newbe..

oscar@Zepto:~/anyremote-4.3$ make
Making all in src
make[1]: Entering directory `/home/oscar/anyremote-4.3/src'
gcc -DPACKAGE_NAME=\"anyremote\" -DPACKAGE_TARNAME=\"anyremote\" -DPACKAGE_VERSION=\"4.3\" -DPACKAGE_STRING=\"anyremote\ 4.3\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"anyremote\" -DVERSION=\"4.3\" -DSTDC_HEADERS=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_FCNTL_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_TERMIOS_H=1 -DHAVE_UNISTD_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_FORK=1 -DHAVE_VFORK=1 -DHAVE_WORKING_VFORK=1 -DHAVE_WORKING_FORK=1 -DHAVE_STDLIB_H=1 -DHAVE_MALLOC=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DSELECT_TYPE_ARG1=int -DSELECT_TYPE_ARG234=$fd_set\ \*$ -DSELECT_TYPE_ARG5=$struct\ timeval\ \*$ -DHAVE_ISASCII=1 -DHAVE_SELECT=1 -DHAVE_STRCHR=1 -DHAVE_STRSTR=1 -I. -DUSE_BT=1 -DUSE_XTEST=1 -g -O2 -I/usr/local/include -Wall -D_REENTRANT -O2 -g -MT xemulate.o -MD -MP -MF .deps/xemulate.Tpo -c -o xemulate.o xemulate.c
xemulate.c:31:22: error: X11/Xlib.h: No such file or directory
xemulate.c:32:34: error: X11/extensions/XTest.h: No such file or directory
xemulate.c:41: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
xemulate.c: In function ‘freeDisplay’:
xemulate.c:47: error: ‘disp’ undeclared (first use in this function)
xemulate.c:47: error: (Each undeclared identifier is reported only once
xemulate.c:47: error: for each function it appears in.)
xemulate.c:48: warning: implicit declaration of function ‘XCloseDisplay’
xemulate.c: In function ‘mouseClick’:
xemulate.c:57: warning: implicit declaration of function ‘XTestFakeButtonEvent’
xemulate.c:57: error: ‘disp’ undeclared (first use in this function)
xemulate.c:57: error: ‘True’ undeclared (first use in this function)
xemulate.c:57: error: ‘CurrentTime’ undeclared (first use in this function)
xemulate.c:58: error: ‘False’ undeclared (first use in this function)
xemulate.c: At top level:
xemulate.c:68: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘keysymStr2keycode’
xemulate.c: In function ‘keyboardClick’:
xemulate.c:80: error: ‘KeyCode’ undeclared (first use in this function)
xemulate.c:80: error: expected ‘;’ before ‘kc’
xemulate.c:82: warning: implicit declaration of function ‘XTestFakeKeyEvent’
xemulate.c:82: error: ‘disp’ undeclared (first use in this function)
xemulate.c:82: error: ‘kc’ undeclared (first use in this function)
xemulate.c:82: error: ‘True’ undeclared (first use in this function)
xemulate.c:82: error: ‘CurrentTime’ undeclared (first use in this function)
xemulate.c:83: error: ‘False’ undeclared (first use in this function)
xemulate.c: In function ‘emulateCommands’:
xemulate.c:94: error: ‘disp’ undeclared (first use in this function)
xemulate.c:95: warning: implicit declaration of function ‘XOpenDisplay’
xemulate.c:106: warning: implicit declaration of function ‘keysymStr2keycode’
xemulate.c:106: error: ‘False’ undeclared (first use in this function)
xemulate.c:106: error: ‘CurrentTime’ undeclared (first use in this function)
xemulate.c:113: error: ‘True’ undeclared (first use in this function)
xemulate.c:130: warning: implicit declaration of function ‘XTestFakeMotionEvent’
xemulate.c:139: warning: implicit declaration of function ‘XTestFakeRelativeMotionEvent’
xemulate.c:186: warning: implicit declaration of function ‘XFlush’
make[1]: *** [xemulate.o] Error 1
make[1]: Leaving directory `/home/oscar/anyremote-4.3/src'
make: *** [all-recursive] Error 1

mike_mike

February 19th, 2008, 01:29 PM

2stareez:
>error: X11/Xlib.h: No such file or directory
>error: X11/extensions/XTest.h
You have to install package with these headers ( ... and Xtst libs also).
See http://anyremote.sourceforge.net/pre.html for details.

woferon

February 19th, 2008, 08:30 PM

mike_mike:
I've bought bluetooth today, will receive it tommorow.
BTW Can you please tell me why Server-mode can't be run by usb cable? I just don't get what's difference :)

mike_mike

February 20th, 2008, 07:00 AM

2 woferon:
Well, in general it could - but only if java in phone have access to com port.
And did not manage to work anyRemote with this type of connection yet.
Anyway You can try :-)))

stareez

February 20th, 2008, 11:11 AM

Thanks Mike, Installing those packages did the trick!
Now I can connect, just need to learn to config the cfg right.

Edit: I use anyremote 4.3 and ganyremote 2.5, it works fine now with my Nokia 5310!

mike_mike

February 20th, 2008, 01:21 PM

2 stareez:
Just to clarify... Do You use anyRemote in Server mode via bluetooth ?
(i'm going top add 5310 to list of supported models)

stareez

February 21st, 2008, 04:53 PM

2 mike_mike:

I have run: ./configure
make
sudo make install

I get following when trying to start anyremote:

oscar@Zepto:~/anyremote-4.3$ anyremote
Search configuration file /home/oscar/.anyremote.cfg
Search configuration file ./.anyremote.cfg
Can not find configuration file to use or incorrect content of configuration file detected.
Can not initialize configuration. Exiting.

When I start ganyremote I get following:

oscar@Zepto:~/anyremote-4.3$ ganyremote
Starting backgroung threads
FrontEnd init
FrontEnd thread is running
FrontEnd socket created
FrontEnd socket after listen

With ganyremote I can remote my computer with bluetooth.

Phone: Nokia 5310

mike_mike

February 21st, 2008, 07:57 PM

2 stareez:
You need to run anyremore with "-f /path/to/cfg/file" option.Just to clarify...

Do You use anyRemote in Server mode via bluetooth ?
(i'm going top add 5310 to list of supported models)

woferon

February 21st, 2008, 08:38 PM

2 mike_mike:
I've bought bluetooth adapter, installed and ... doh, I think something's wrong here. When I connect to the computer with anyremote (java one) I can see few "buttons" which show what key's I use at the moment and there's, I guess, error under them. It says

openConnection
Exception
java.lang.IllegalArgumen
the rest is running out of screen, so can't quote it. Does it mean that my phone can't be connected via bluetooth? Tried it in Server-mode, can't check AT mode because it won't "run", I have no idea why, simply when I click "run" in ganyremote it doesn't run. Any ideas?

Edit:

Just realised ... when trying to use AT mode it says "Disconnected from phone", anyremote on my phone also doesn't find anything when I use search function (well, bluetooth connection works as I can enter my phone from computer and transfer files, so it's not the case for sure..)

Edit2: doh... damn typo's -.- they're following me :P

mike_mike

February 22nd, 2008, 07:31 AM

2 woferon:
Have You managed to solve issues ?
If no:
1. run anyremote from command line with "-f ...." option. Use cfg.file from Server-mode
directory.
2. Are the page amd inqury scan enabled on PC side ? (see docs about that)
3. Start java client and run search.

stareez

February 23rd, 2008, 11:10 AM

2: mike_mike

Thanks for the help! Now I run anyRemote in Server mode via bluetooth on my Nokia 5310.
It works great!

dogscoff

April 4th, 2008, 01:01 PM

I've been playing with anyremote the last few days. Got it installed and working both on PC and phone. The two are talking to each other, I'm at the point now where I need to write some .cfg files. The ones supplied don't work on my system for some reason (I think running gnome rathr than kde might be a big part of it.)

I'm particularly interested in getting working cfgs for vlc and totem.
From vlc's docs I see you can start it in --intf rc mode, which will allow it to accept commands from the terminal. Could I just plug some of these commands into a cfg file and control vlc that way? Am I on the right tracks here?

mike_mike

April 8th, 2008, 06:23 AM

2 dogscoff:
Firstly, it is good idea to find out why supplied cfg files does not works.
Please, run anyRemote with -log option and send log files to anyremote@mail.ru

As for vlc, please see cfg-data/Server-mode/vlc.cfg for details.

dogscoff

April 10th, 2008, 10:25 AM

Thanks for the reply, i will do email you in a few days.
Is anyremote designed with kde in mind rather than gnome? From memory (not at my home PC right now, so I can't check) the error message were about something called dbus, which google told me was kde only. Many of the cfg files also use "kdialog" which doesn't seem to be recognised by my system, and the name looks like a kde app.

mike_mike

April 10th, 2008, 01:01 PM

No, anyRemote is a console application and should work with any WM.
DCOP (not dbus) is KDE-related thing and used only to manage KDE-related apps.
kdialog used in many cfg.files, but with keepeng in mind possibility to work in non-KDE environment (in this case xmessage will be used)

dogscoff

April 10th, 2008, 04:18 PM

Yes, Dcop, that's it. What is the gnome alternative to dcop? The VLC config I found seemed to rely on dcop, but of course I don't have it.

Maybe I have downloaded the wrong config files somwhow?

mike_mike

April 11th, 2008, 10:52 AM

Mmm ... VLC config should NOT rely on DCOP. It uses wget instead.
Please post suspicious :-) part of VLC config here.

dogscoff

April 12th, 2008, 07:47 PM

Well damn... it works.. .mostly. What I did differently:

1 - I copied the vlc.cfg from server-mode to ~/.anyremote.cfg
2 - I used anyremote rather than the ganyremote gui (which I thought would make things easier)
3 - instead of opening vlc and then opening a video file from the PC, I used the file browser on the mobile (hadn't noticed it before!)

So the the file browser works, pause/ play/ back forwards seem to work. Volume doesn't work ( amixer: Unable to find simple control 'Master',0 ) and I can't figure out how to get to DVDs from the phone's file browser, but I'm most of the way there.

This is so cool... even my wife had to admit it, and she said I was being ridiculously geeky when I first explained to her what I was trying to do...

Thanks for your help mike, any more advice would be welcome but I'm pretty happy already =-) =-)

dogscoff

April 13th, 2008, 11:11 AM

OK, got the volume control working: I changed
1=Exec(amixer $(mixer_card) sset,master,0 5%- -q)

to

1=Exec(amixer $(mixer_card) sset Front,0 5%- -q)

Volume controls now work perfectly. Anyone know how to open and play a dvd in vlc from the phone's browser?

mike_mike

April 14th, 2008, 06:57 AM

2 dogscoff:
by the way, which phone/model do You use with anyRemote ?
Which kind of connection do You use (bluetooth/IR/HTTP interface/... ) ?

mike_mike

April 14th, 2008, 06:59 AM

2 dogscoff:

>Anyone know how to open and play a dvd in vlc from the phone's browser?
Not yet. I'm going to investigate this.

dogscoff

April 14th, 2008, 04:40 PM

2 dogscoff:
by the way, which phone/model do You use with anyRemote ?
Which kind of connection do You use (bluetooth/IR/HTTP interface/... ) ?

Sony Ericsson k800i via bluetooth. This phone really is an all purpoose device for me now... phone, camera, video camera, mp3 & movie player, radio... and now PC remote control as well. All i need now is a way for it to fetch me beer from the fridge.

BTW, the VLC config file I used *does* use wget and not dcop. I don't know where I go that idea from =-/

kwaanens

April 21st, 2008, 06:46 PM

Here are 64 bit packages. I had to struggle a bit to get this going, but after getting 64 bit, everything was smooth sailing :)
Run ganyremote in terminal and you will likely figure out what depoendencies your are missing.

mike_mike

April 22nd, 2008, 04:06 PM

Could You please send me the patch to anyremote@mail.ru ?

aaron552

April 23rd, 2008, 10:24 AM

Hi. I've had anyremote working over bluetooth (in server mode) for a while now, but there has always been one thing that doesn't work. Any config that depends on imagemagick crashes my phone (nokia 6234). The screen goes white and the start video plays again, so i assume something went wrong somewhere. I have no idea how to fix this, can anyone help?

mike_mike

April 25th, 2008, 05:52 AM

Yes, i've got the same behavoiur witn 6288. Please, read
http://anyremote.sourceforge.net/phones.html
Seems this could be Nokia's bug.

n0l4n

May 6th, 2008, 01:55 PM

I get an error on my 5500 Sport:

openConnection Exeption java.io.IOExeption SymbianOS error=-1 : General: System error
The client is 4.5-2_all

This is the log file on the PC:

[Tue May 6 15:53:08 2008] - DEBUG - mainRoutine
[Tue May 6 15:53:08 2008] - INFO - openPort()
[Tue May 6 15:53:08 2008] - DEBUG - Bluetooth Sockets Server mode. Use channel 19
[Tue May 6 15:53:08 2008] - INFO - registered SP for channel 19
[Tue May 6 15:53:08 2008] - DEBUG - findItemInMode >default,(Init)<
[Tue May 6 15:53:08 2008] - DEBUG - findItemInMode: No parameters suspected. Item does not found.
[Tue May 6 15:53:08 2008] - DEBUG - initPort
[Tue May 6 15:53:08 2008] - INFO - Server mode: Waiting connection
[Tue May 6 15:53:08 2008] - INFO - listenAndAcceptSocketConn

mike_mike

May 7th, 2008, 05:58 AM

Well, does 5500 finds PC with anyRemote ?
Does java client have permissions to connect ? (it needs to set midlet permissions)

n0l4n

May 7th, 2008, 05:30 PM

yes. It has permissions (i`m asked about permissions every time i start the app). The phone finds anyremote. i get some services to conect to like COM0, IR0, USB0 and BT0-BT63. No mather what i choose i get the same error.

mike_mike

May 8th, 2008, 08:16 AM

If i remembet correctly, there should be some menu like "Allow ... to untrusted midlets" or "Trust ... untrusted midlets" where is it possible to set additional permissions. Have You found that one ?

mike_mike

May 8th, 2008, 09:47 AM

Please, read this:
http://www.allaboutsymbian.com/forum/showthread.php?t=56071
Will soft-reset could helps You ?

n0l4n

May 9th, 2008, 10:51 PM

I resetted the phone. I found the menu with permissions. Its "Suit Settings". I`ve set everything to "Always allowed". The error is still present. Are there any logs in the phone i can send you?
Apps like BluePad and Amora work fine btw.

mike_mike

May 12th, 2008, 08:02 AM

Have You reinstalled java client after resetting the phone ?
By the way, is You phone operator-locked ?

saverjack

June 4th, 2008, 12:07 PM

how to install the software in ubuntu 7.10

saverjack

June 4th, 2008, 12:20 PM

Darkade

June 7th, 2008, 11:26 PM

Hey! great post. I just would like to add that there's available a graphic frontend for anyremote available here http://anyremote.sourceforge.net/dload.html

For this to work you should first have installed anyremote and then install ganyremote or kanyremote both available in .deb files from the website above.

:lolflag:

St Stephen

June 14th, 2008, 03:52 AM

Hi,
Im trying to get gAnyremote up and running, and right now I'm working on the Java client package. I've tried to install it with

$ ./configure --prefix=/usr --with-wtk=~/Documents/gAnyremote?WTK.5.2 --with-ProGuard=~/Documents/gAnyremote/proguard4.2

but the output is

checking for javac... /usr/bin/javac
checking for java... /usr/bin/java
checking for jar... /usr/bin/jar
configure: error: please specify --with-proguard <path to ProGuard>
See `config.log' for more details.

is there somewhere else that im supposed to point to? Is there a specific file that its looking for?

And on a side note, what is the best place to have the WTK and ProGuard installed? I feel like my current place for them is less than stellar

Thanks

mike_mike

June 17th, 2008, 06:30 PM

2 St Stephen:
Do You really want to compile java client from sources ? You can just
upload precompiled *jar to the phone.

TwoD

June 25th, 2008, 03:49 AM

I'm having trouble installing anyremote v4.6 on my amd64 system.
Compilation etc works fine, but when I try "sudo checkinstall make install" I get this:

Config questions
...
Installing with make install...

========================= Installation results ===========================
Making install in src
make[1]: Går till katalogen "/tmp/anyremote-4.6/src"
make[2]: Går till katalogen "/tmp/anyremote-4.6/src"
test -z "/usr/bin" || /bin/mkdir -p "/usr/bin"
/usr/bin/install -c 'anyremote' '/usr/bin/anyremote'
make[2]: Inget behöver göras för "install-data-am".
make[2]: Lämnar katalogen "/tmp/anyremote-4.6/src"
make[1]: Lämnar katalogen "/tmp/anyremote-4.6/src"
make[1]: Går till katalogen "/tmp/anyremote-4.6"
make[2]: Går till katalogen "/tmp/anyremote-4.6"
make[2]: Inget behöver göras för "install-exec-am".
test -z /usr/share/anyremote || mkdir -p -- . /usr/share/anyremote
test -z /usr/share/doc/anyremote || mkdir -p -- . /usr/share/doc/anyremote
cp -r cfg-data /usr/share/anyremote
cp -r doc-html NEWS README COPYING VERSION AUTHORS /usr/share/doc/anyremote/
find /usr/share/anyremote /usr/share/doc/anyremote -type f -exec chmod 644 {} \;
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Utils/xmms_is_playing": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Utils/all-in-1.py": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Utils/gradient.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/amarok.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/xmms.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/juk.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/noatun.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/kdetv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/kscd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/tvtime.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/quodlibet.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/totem.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/exaile.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/template.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/kaffeine.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/mpd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/kplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Bemused-emulation/rhythmbox.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/banshee-v2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/fileManager2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kmplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/gnomeradio.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/customizeClient5.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/keyboard.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/amarok.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kuickshow.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/adminExample.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/xfmedia.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/xmms.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/audacious.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kaboodle.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/sound.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/nokia-e61.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/juk.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/noatun.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/bmp.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/autolock.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/winManager.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/amarok-v3.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/fileManager3.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kaffeine-v2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kview.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/decibel.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/xdtv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/xine.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kdetv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/customizeClient.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/moc.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kscd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/customizeClient4.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/tvtime.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/quodlibet.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kmid.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/all-in-one.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/fileManager.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/gmusicbrowser.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/totem.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/ooimpress.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kaffeine_dvbt.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kopete.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/exaile.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/xmms2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kaffeine.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/vlc.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/aqualung.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/myth-tv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/iconUpload.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/mpd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/smplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/listen.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/elisa.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/imageViewer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/mouse.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/nokia-e70.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/amarok-v2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/multimode.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kdialog.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/freevo.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/rhythmbox.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/all-in-one2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/banshee.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/mplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/rssReader.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/comix.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/customizeClient3.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/customizeClient2.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/kpdf.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Server-mode/gwenview.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/xineForDvd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kmplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/keyboard.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdialog.siemens.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/amarok.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kuickshow.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/xfmedia.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/xmms.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/audacious.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/sound.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdialog.se.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/juk.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdialog.sagem.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/noatun.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/bmp.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/autolock.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kview.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdialog.motorola.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/xdtv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdetv.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/moc.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kscd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/tvtime.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/quodlibet.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/all-in-one.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/gmusicbrowser.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/totem.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/exaile.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kaffeine.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/aqualung.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/mpd.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kplayer.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/listen.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/elisa.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/mouse.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/multimode.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/kdialog.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/freevo.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/rhythmbox.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/AT-mode/banshee.cfg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/VERSION": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/COPYING": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/NEWS": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/lirc.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/use.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/mode.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/getstarted.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-window.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/setup-at.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/contacts.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/web.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/pre.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/make.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-icons.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/k-shots.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote16.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-xmms32.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyremote22.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/file-manager.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyremote16.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-xmms.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/spacer.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote-tray.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/any3.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/nothing.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/kanyremote-devbr.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-default-fs.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/hash.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/launch.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/up.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/previous.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/vol_up.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/star.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/view_text.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/down.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/flag.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/pause.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/plus.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/next.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/mute.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/fileclose.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/vol_down.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/question.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/minus.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/black.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/fullscreen.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/bookmark.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/view_tree.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/save.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/no.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/anyRemote.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/file.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/click_icon.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/info.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/forward.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/fit.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/exit.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/default.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/refresh.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/minimize.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/exec.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/ok.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/empty.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/apply.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/play.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/edit.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/rewind.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/find.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/configure.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/anyRemoteClient.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/folder.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/icons/stop.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-bottomarc-fs.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyremote.svg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyremote32.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/default.css": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote16.ico": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyremote24.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/file-manager2.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-list.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-list-menu.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote1.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-text.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/master.css": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/any1.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/jc-menu.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/fileManager3.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/amarok.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/fileManager2.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/amarok-v2.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/banshee-v2.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/jc/banshee.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-digikam.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/header.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/kanyremote-devdet.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-test.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote32.ico": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote32.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote-devdet.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/client-bottomline-fs.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/view-screen.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/kanyremote2.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-gray.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-yellow.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar.xcf": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-foot.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-navigation-off.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-old.xcf": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-red.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-green.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bullet-blue.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-navigation-on.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/img/bg-sidebar-blue.png": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/anyRemote16.gif": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/any6.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote3.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote2.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/data/ganyremote-devbr.jpg": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/docs.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-text.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/conf-at-ex.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/cfg-howto.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/frontend.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-parameter.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/ir.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-menu.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/g-shots.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-list.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/bemused.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/dcop.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/thanks.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/conf-server.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/ev-reporting.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/index.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set-fm.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/devices.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/man.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/dload.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/emulate.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/set.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/conf-at.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/setup-server.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/use-jc.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/phones.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/conf-server-ex.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/faq.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/install.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/pre-setup.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/doc-html/ckpd-emulation.html": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/README": Filen eller katalogen finns inte
chmod: ändrar rättigheter på "/usr/share/doc/anyremote/AUTHORS": Filen eller katalogen finns inte
chmod -R a+x /usr/share/anyremote/cfg-data/Utils
chmod: ändrar rättigheter på "/usr/share/anyremote/cfg-data/Utils": Filen eller katalogen finns inte
chmod: kan inte läsa katalog "/usr/share/anyremote/cfg-data/Utils": Filen eller katalogen finns inte
make[2]: *** [install-data-local] Fel 1
make[2]: Lämnar katalogen "/tmp/anyremote-4.6"
make[1]: *** [install-am] Fel 2
make[1]: Lämnar katalogen "/tmp/anyremote-4.6"
make: *** [install-recursive] Fel 1

**** Installation failed. Aborting package creation.

Cleaning up...OK

Bye.

Basically, chmod tries to set permissions on all files, but fails because they don't exist.

Regular "sudo make install" works fine.

I found some indications that there might be a bug in checkinstall, although there was no reply to the mailing list thread I found so I'm not sure.

Anyone else having the same problem?

mike_mike

June 26th, 2008, 10:21 AM

Hi All!

See http://anyremote.sourceforge.net/contacts.html for the contact e-mail.

empty_tank

July 14th, 2008, 05:14 PM

Umbro_domini

August 1st, 2008, 06:01 PM

can anyone help me with my motorola a1200 ming?I cant figure out how to configure the server and my phone hangs everytime I bond with my machine..

help please/.:((

Gourgi

August 1st, 2008, 09:10 PM

can anyone help me with my motorola a1200 ming?I cant figure out how to configure the server and my phone hangs everytime I bond with my machine..

help please/.:((

i can confirm this bug with my motorola moto ming a1200 too ..

mike_mike

August 4th, 2008, 09:08 AM

2 Umbro_domini:
Please try to use anyRemote v3.6 (it contains java client inside). This version was tested with a1200 with success.
After this please help me to understand the difference beetween v3.6 and \
current v4.6 :-)

mike_mike

August 4th, 2008, 09:09 AM

By the way, which version of BlueZ do You have ?

Umbro_domini

August 5th, 2008, 06:23 PM

By the way, which version of BlueZ do You have ?

yes sir I do have bluez...i can't figure just can't figure out how to configure the server mode in my computer cant understand how the cfg files work..could you please give me a step by step..please...:((

mike_mike

August 6th, 2008, 07:56 AM

1. install anyremote, anyremote-data, anyremote-doc, ganyremote (or kanyremote)
2. update BlueZ to 3.35 or higher (which version do You have ?)
3. run ganyremote/kanyremote
4. upload java client to the phone
(Setup->Device Browser->Search;
then Setup->Device Browser->Device details->Upload java)
5. choose application in GUI and click "Run"
6. run java client on the phone and start search.
7. if anyremote found connect to it and enjoy.

What exactly does not works ?
Please, step-by-step - what i've done with which result ?

mike_mike

August 6th, 2008, 08:14 AM

oops, typo ... last line should be:
Please, step-by-step - what you've done with which result ?

flytripper

August 6th, 2008, 09:23 AM

Making all in src
make[1]: Entering directory `/home/andy/Desktop/anyremote-4.7/src'
gcc -DUSE_BT=1 -DUSE_XTEST=1 -g -O2 -I/usr/local/include -Wall -D_REENTRANT -O2 -g -o anyremote atsend.o btio.o main.o cmds.o parse.o utils.o xemulate.o conf.o -lbluetooth -lXtst
/usr/bin/ld: cannot find -lXtst
collect2: ld returned 1 exit status
make[1]: *** [anyremote] Error 1
make[1]: Leaving directory `/home/andy/Desktop/anyremote-4.7/src'
make: *** [all-recursive] Error 1

i am stuck on
make any pointers? i googled lxtst and got nothing,zip,nada.

flytripper

August 6th, 2008, 10:36 AM

Ok i finally got it installed. and all the extras gany/html etc.

i am trying to connect via my AP with an N95

now when i start the PC side up it says "connected to phone" and automatically starts up banshee (good :) )
it says "internet:server not found". also it doesnt have any functionality. the buttons are just blue circles and don't do anything...

i am using ip 192.168.0.1:5550 and :5000

when i manually got to my address via a browser it works!!
its just the java client that is confusing
can anyone help?

mike_mike

August 7th, 2008, 10:47 AM

2 flytripper:
it needs to install Xtest library and headers first.
see http://anyremote.sourceforge.net/pre.html for details

mike_mike

August 7th, 2008, 10:50 AM

2 flytripper:
Just to clarify: So, You have tried to use anyRemote through WiFi and web interface ?
(not directrly through bluetooth ?)

mike_mike

August 7th, 2008, 10:51 AM

2 flytripper:
Just to clarify: So, You have tried to use anyRemote through WiFi and web interface ?
(not directrly through bluetooth ?)

flytripper

August 7th, 2008, 04:17 PM

that is what i am doing.. wifi using the java client... the web interface works but the client doesnt.

mike_mike

August 7th, 2008, 07:53 PM

This is is the problem. If You use java client, You need not use WEB interface.
Or if You want to use WEB interface, not use java client :-)
These are two different ways to get thing worked.

so,
1. run anyremote -s socket:5000 -f ..../fcfg/file on PC
(or use GUI. it needs to set "override device parameter" as socker:5000)
Do not start WEB interface
In java client insert IP address of Your PC:5000
Then connect and use it.
2. Alternatively: start anyremote with WEB interface (port 5550).
Do not start java client.
Run WEB browser (You want to use WEB interface, right ? :-)) on You Nokia and open
in browser page http://<ip address of PC>:5550

flytripper

August 8th, 2008, 11:41 AM

O my goodness.. thank you so much.. awesome piece of software :) bit tricky to get working though.. +8

mike_mike

August 8th, 2008, 11:42 AM

So, does it finally works in Server mode with java client ?

flytripper

August 8th, 2008, 12:55 PM

yes!! thanks a mil.

Umbro_domini

August 9th, 2008, 09:29 AM

Hi i've go anyremote and ubuntu Harday heron workd via bluetooth but I can't seem to control openoffice impress...does anyone have an idea about this?...tnx in advance:D

mcbean

August 9th, 2008, 05:16 PM

Does anyone have any experience with the Samsung E840? I can't install the Java Client on it, each time it says "Java Error. Authorization Failed". I've tried to change security settings on my phone, but I can't see anything about letting untrusted app's run.

E840 is not mentioned specifically on the anyRemote site, and it claims to be JSP-82 compliant. So I assume I'm doing something wrong!

Any help greatly appreciated!

mike_mike

August 10th, 2008, 11:27 PM

2 Umbro_domini:
So, do You manage anyRemote to work with Your a1200 ?
If not, please describe issue in details.

mike_mike

August 10th, 2008, 11:30 PM

2 mcbean:
It is a pity, but seems this problem is typical for Samsungs.

mcbean

August 12th, 2008, 06:21 PM

Mike_Mike, thanks for the quick response. Pity about the samsungs. I'll have to wait 'til I get a new phone!

majaron

October 29th, 2008, 03:33 PM

Hello

I installed everything (anyremote, ganyrmote, bluez...) on my computer and it works i guess. It recognizes my Sony Ericsson w950 and there is a list of all cfg files.

On my phone i installed java client, and it works too i guess. It found my computer when i select search for device.

Than i try to connect computer and the phone:
1. I open ganyremote and click start. It says "disconnected from phone" but that's fine i think.
2. I open java client on my phone and start searching for devices
3. I click connect and a black keyboard pops up.

But here know is the problem. On the keyboard there are no keys, just locks so i can't do anything.
And another thing, on ganyremote on my computer stil say "disconnected from phone".

So it didn't even connect.
What can i do. Please help!

mike_mike

November 5th, 2008, 01:20 PM

If You are using 8.10 please see the following thread http://ubuntuforums.org/showthread.php?t=964139&highlight=anyremote&page=2

danf_1979

November 20th, 2008, 03:25 PM

This worked on a SE W890i. Thanks!

I did this:

$ sudo aptitude install anyremote

Then download anyremote-j2me-client from the download section from anyremote's page on sourceforge.

$ dpkg -i anyremote-j2me-client

I copied /usr/share/anyremote-J2ME-client/anyRemote.jar to my phone using apache webserver to download it, since I have problems sending files through bluetooth. Once installed, you're ready.

All configuration files are stored in /etc/anyremote. For example, to control openoffice impress, go to a console and type:

$ anyremote -f /etc/anyremote/Server-mode/ooimpress.cfg

And then execute anyremote client on your phone.

Thanks mike!

loopeando

December 28th, 2008, 05:28 PM

Any idea on how to install the anyRemote JAVA client on a Nokia 6820 (Symbian S40 v1.0 with 64 Kb limit for JAVA apps)?

mike_mike

January 2nd, 2009, 09:17 PM

Since *jar is just a zip file it is possible to remove some icons from it and decrease size.

wantime

February 6th, 2009, 09:51 PM

hmm .. don't see how to completely delete this message, got it working thanks.

Ahmedmb

May 22nd, 2009, 05:13 PM

Thank You

i try to use anyremote to control XBMC on ubuntu 9.04
My mobile is nokia 5320
I get this error on mobile
openconnection Exception javax.bluetooth.blutoothconnectionException SymbionOS error = -6004 : General: System Error.

Any Help

Lylex11

July 5th, 2009, 02:23 PM

I am using ubuntu 9.04 amd64 on hp g60 trying to connect to a nokia 3110c. I can transfer files to/from phone and palm t|x using obex, however on startup message pop up says "bluetooth not connected". When I click on "start" in ganyremote status reports "disconnected from phone". When I open anyremote on Nokia and try to connect I get message:
openConnection Exception javax.bluetooth.BluetoothConnectionException null and also get a black background with locks.

Any help to fix this issue is appreciated.

lwhitmore

July 21st, 2009, 05:25 PM

The version of anyRemote in the standard Jaunty repositories didn't work for me.

I managed to get the program working with Ubuntu 9.04 by installing the latest version from this repository:

https://launchpad.net/~anyremote/+archive

----

I also installed blueman (to manage bluetooth devices) from this repo:
https://edge.launchpad.net/~blueman/+archive/ppa.

dogscoff

August 30th, 2009, 11:48 AM

I've just come back to anyremote after a short absence (and OS upgrade) and I've been using the server-mode/rhythmbox.cfg to control my music via bluetooth. It's not my favourite player (I've been bugging the Jajuk ppl to add support but they don't seem interested - ah well), but it seems to have the best anyremote support.

Anyway, I'm positive rhythmbox used to send album titles over to the phone, but now it doesn't. Am I dreaming or did this function exist in the past? Am I running an old version of the cfg file? Where can get a fully functional one?

theone964

February 10th, 2010, 02:39 AM

Hey i guess i'm starting the tread again since the last time it was used was over 6 months ago lol.

Ok so i just installed Ubunto for the first time ever on my system (9.10)

I was trying to use the gAnyRemote application on my HTC Tilt via Bluetooth and am running into some problems.

I've connected my phone to the pc, and uploaded the .jar file for the nojsr82. Whenever i run the app on the phone to connect it says "socket://enter.ip.here.port", no matter what i do it tries to connect through wifi or a data package and i got my carrier to disable data ( and at a location without wifi). is there anyway to make it work without wifi or data packages?

Thank you

userkiller

February 11th, 2010, 03:13 AM

This is pretty cool.

airtonix

April 7th, 2010, 02:38 PM

anyremote wont work with my cheap'o mobile phone (samsung c3050) since both variants of the client don't launch.

After much searching and experimenting, i managed to get Linux Bluetooth Remote Control (LBRC) to work.

First few times the client would find the server, and connect ... however the server would not show any recognition of this and reported that there were no connected clients.

But I eventually got it working, not exactly sure how but currently my setup looks like this :

1. bluetooth properties >
always visible : true
phone found and trusted : true

2. launch LBRCdbus :

$ sudo LBRCdbus

3. launch LBRC-config >

[Configuration]
save profile for next start : ticked
show bluetooth controls : ticked
require pairing : unticked
one time pairing : unticked
[Profile]
XInput

4. run LBRC-applet

$ LBRC-applet & 5. right click the LBRC notification icon and select : Profiles > XInput

6. send client to your phone :
a.
$ bluetooth-sendto
b. file browser shows up >>> press ctrl-l
c. replace the text in the locaton field with :
/usr/share/lbrc/j2me/
d. hightlight both files there, one jad file and one jar file
e. click "Open"
f. Select your phone
g. ???
h. profit

7. run the client on your phone and search for your comptuer
( I assume you can already pair with your computer from your phone and vice versa).

8. If connection is successful, you should see two things :
a. on your computer you will see a notification bubble saying that such and such mac address has connected to so and so mac address.
(these are mac addresses of your phone and computers bluetooth devices)
b. on the phones screen, two lines of text :

Keypress : blah blah blah:
keycode : somethingsomethingsomething

9. using the directional pad on your phone ought to move your mouse cursor around and depending on the profile settings the numpad on your phone will send keyboard codes to the computer.

djcrash1981

April 7th, 2010, 08:20 PM

Fab,
1. have You tested AT mode ?
2. have You tried JamSE ?

Hi, I've just send you an e-mail with some info.

Would you take care to see it?

Thanks in Advance.

The subject say: Anyremote karmic (PPA) with nokia n97

KEE

April 11th, 2010, 12:44 AM

hello i get missing packages =S
l@l-laptop:~$ sudo aptitude install gcc build-essential bluetooth bluez-cups bluez-hcidump bluez-passkey-gnome bluez-pin bluez-utils gnome-bluetooth libbluetooth2 libbluetooth2-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
No candidate version found for bluez-passkey-gnome
Couldn't find any package whose name or description matched "bluez-pin"
Couldn't find any package whose name or description matched "libbluetooth2"
Couldn't find any package whose name or description matched "libbluetooth2-dev"
No candidate version found for bluez-passkey-gnome
Couldn't find any package whose name or description matched "bluez-pin"
Couldn't find any package whose name or description matched "libbluetooth2"
Couldn't find any package whose name or description matched "libbluetooth2-dev"
The following NEW packages will be installed:
bluez-hcidump
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 86.9kB of archives. After unpacking 291kB will be used.
Writing extended state information... Done
Get:1 http://ubuntu.mirror.iweb.ca karmic/universe bluez-hcidump 1.42-1build1 [86.9kB]
Fetched 86.9kB in 1s (60.2kB/s)
Selecting previously deselected package bluez-hcidump.
(Reading database ... 232075 files and directories currently installed.)
Unpacking bluez-hcidump (from .../bluez-hcidump_1.42-1build1_i386.deb) ...
Processing triggers for man-db ...
Setting up bluez-hcidump (1.42-1build1) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done

l@l-laptop:~$

mealstrom

June 1st, 2010, 11:10 PM

maybe this will be useful , just like some replacement to ganyremote. server edition :).
scans media for yours BT devices;
run application if found some available devices.
set password for anyremote. This is useful to protect server :D

put this file to run every 1 minute in cron.

cat bluetooth.pl

#!/usr/bin/perl
########################################
# By Aleksander Mischenko aka Mealstrom #
# mail: mischenko.mm[doggy]gmail[dot]com#
# Licence: GPL v3 :D #
# Version: 0.9 beta #
#########################################
#
#
#
# hcitool scan -- timeout 30 sec. Run it in console to get BT MAC
#
# list of processes to be runned or shutdown when BT device is in range
# %processes=(process1,parameters for proc1 , proc2...)
# allowed macs:
# @mac = ("mac1","mac2");
# TODO:
# remake match pattern for BT macs.

#Globals

#delete -password to access without it
%processes=("anyremote","-fe 5050 -f /usr/share/anyremote/cfg-data/Server-mode/all-in-one2.cfg -password -s bluetooth:19 > /dev/null &");

#change this for yours real BT macs
@mac =("00:XX:XX:XX:XX:XX","00:AA:A1:A2:A3:A4");
#change yours home directory
$password_file="/home/xxxxxxxxx/.anyRemote/password";
#change password for access
$password="XXX";
#check if there any allowed mac-address
sub bt_mac_check
{
my @btscan = `hcitool scan`;
#remake match pattern for multiline input
foreach $i(@btscan){
if ($i =~ m/\t(.*)\t/){
# if ($i =~ m/([0-9A-F]{2}:){5}[0-9A-F]{2}/i){
#mach mac address format
foreach (@_){if ($_ eq $1){return 1;}}
}
}
return 0;
}

#check if password is ne
sub passcheck
{
open (PASSWD, "< $password_file") || die("Could not open file!");
while (<PASSWD>) {
if ($_ ne $password){
return 1;
}
}
return 0;
close(PASSWD);
}

#set password for anyremote
sub passset
{
open (PASSWD, "> $password_file") || die("Could not open file!");
print PASSWD $password;
close (PASSWD);
}

if (passcheck){passset;}
$mac_check=bt_mac_check @mac;
#$mac_check=0;
print "maccheck = $mac_check\n";

while (($key, $value) = each (%processes)) {
if ($mac_check){
if (!`pgrep $key`) {
#print "Starting process $key ... \n";
`$key $value`;
}

}
else {
if (`pgrep $key`) {
#print "Process $key is running. So lets kill it ...\n";
`pkill $key`;
}
}
}

dr_smit

September 25th, 2011, 06:12 PM

Great work by Mike!!

I am trying to use on Ubuntu 11.04 with Samsung Galaxy S2 Android phone, there are connected, filemanager on phone could list files, but nothing further can be done presently..
Let me try to update through ppa instead of old version from ububuntu software centre..
any recommendation / comments are welcome

pkg9991

September 25th, 2011, 08:53 PM

nice tutorial.. thank u