NVME format command not working / correct usage?

[keith-scarlett]

Hello,

I've recently got a new to me (i.e. used) laptop and I'd like to use the nvme format command to securely erase the contents. I am aware this may be excessive / unnecessary, it's more for future reference.

Here's the relevant terminal output:


mint@mint:~$ nvme list
Node SN Model Namespace Usage Format FW Rev
--------------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 1 0.00 B / 0.00 B 1 B + 0 B
mint@mint:~$ sudo nvme format --ses=2 /dev/nvme0 -n 0xffffffff
You are about to format nvme0, namespace 0xffffffff(ALL namespaces).
Controller nvme0 has child namespace(s):nvme0n1

WARNING: Format may irrevocably delete this device's data.
You have 10 seconds to press Ctrl-C to cancel this operation.

Use the force [--force|-f] option to suppress this warning.
Sending format operation ...
NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0x200b)
mint@mint:~$ sudo nvme format --ses=2 /dev/nvme0n1 -n 0xffffffff
You are about to format nvme0n1, namespace 0xffffffff(ALL namespaces).
Namespace nvme0n1 has parent controller(s):nvme0

WARNING: Format may irrevocably delete this device's data.
You have 10 seconds to press Ctrl-C to cancel this operation.

Use the force [--force|-f] option to suppress this warning.
Sending format operation ...
NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0x200b)


As you'll see I'm trying to do this on a Linux Mint installation (sorry!) - I couldn't get definitive / clear help on the Linux Forum.

The drive has 4 namespaces (each identified with a different 'p' number, or are these actually partitions?) by the way; my intention is to have the format command apply to all at once and thereby 'unify' the drive.

Any help much appreciated, thanks.

[howefield]

Thread moved to the "Ubuntu/Debian BASED" forum.

[oldfred]

/dev/nvme0n1
NVMe drives have something new as namespaces. Not seen it used.
But the n1 is the first name space.
https://nvmexpress.org/resource/nvme-namespaces/

The p's are partitions.

Model: Samsung SSD 970 EVO Plus 500GB (nvme)
Disk /dev/nvme0n1: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 esp_nvme boot, esp
2 538MB 32.0GB 31.5GB ext4 noble
3 32.0GB 63.5GB 31.5GB ext4 focal_k
5 63.5GB 273GB 210GB ext4 nvme_data
4 469GB 500GB 31.5GB ext4 jammy


sudo nvme format -s1 <device>

https://wiki.archlinux.org/title/Solid_state_drive/Memory_cell_clearing
nvme-sanitize

I do not think I would use any of these commands to bulk erase unless I was planning to destroy drive.
I would just format & run run trim which clears cells.

[keith-scarlett]

Thanks for your reply but it seems unclear. I'd be grateful if you could confirm:

1. How using nvme format would 'destroy' a drive?

2. Whether I am using the correct device name in the code I shared above? If not what is the correct syntax if I decide I do want to use nvme format?

3. What is the usage / syntax for trim and what does trim do?

Thanks!

[yancek]

How using nvme format would 'destroy' a drive?

I'm not familiar with the software you are using but it states specifically that it will destroy the "data" on the drive so if you have files/directories on the device, yes, they will be destroyed. As to the correct device name, running the command: sudo parted -l will list the device name to the right of the word : Disk and will show its size.

If you are not familiar with the software, I would suggest not using it. If there is no data on the drive, I would not expect it to be a problem but if you are going to use it again you will probably need to create a new partition table and partitions and filesystems. As I said, I'm not familiar with the software so you might wait for someone who has experience with it to respond but it is pretty clear that any data will be deleted/overwritten.