anewbie
August 11th, 2020, 10:05 PM
I'm trying to upgrade from 18.04 to 20.04. When I try do-release-upgrade it sez no release:
--
apt-get update
Hit:1 http://security.ubuntu.com/ubuntu bionic-security InRelease
Hit:2 http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit:3 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease
Hit:4 http://ppa.launchpad.net/alex-p/qcad/ubuntu bionic InRelease
Hit:5 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease
Reading package lists... Done
--
root@pc1:~> apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
---
root@pc1:~> do-release-upgrade
Checking for a new Ubuntu release
There is no development version of an LTS available.
To upgrade to the latest non-LTS develoment release
set Prompt=normal in /etc/update-manager/release-upgrades.
--
root@pc1:~> cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.5 LTS"
--
root@pc1:~> cat /etc/update-manager/release-upgrades
# Default behavior for the release upgrader.
[DEFAULT]
# Default prompting behavior, valid options:
#
# never - Never check for, or allow upgrading to, a new release.
# normal - Check to see if a new release is available. If more than one new
# release is found, the release upgrader will attempt to upgrade to
# the supported release that immediately succeeds the
# currently-running release.
# lts - Check to see if a new LTS release is available. The upgrader
# will attempt to upgrade to the first LTS release available after
# the currently-running one. Note that if this option is used and
# the currently-running release is not itself an LTS release the
# upgrader will assume prompt was meant to be normal.
Prompt=lts
---
I then try do-release-upgrade -d and got an error:
root@pc1:~> do-release-upgrade -d
Checking for a new Ubuntu release
Get:1 Upgrade tool signature [1554 B]
Get:2 Upgrade tool [1333 kB]
Fetched 1334 kB in 0s (0 B/s)
authenticate 'focal.tar.gz' against 'focal.tar.gz.gpg'
extracting 'focal.tar.gz'
Reading cache
Checking package manager
Reading package lists... Done
Building dependency tree
Reading state information... Done
Hit http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit http://security.ubuntu.com/ubuntu bionic-security InRelease
Hit http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease
Hit http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease
Hit http://ppa.launchpad.net/alex-p/qcad/ubuntu bionic InRelease
Fetched 0 B in 0s (0 B/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
Checking for installed snaps
Traceback (most recent call last):
File "/tmp/ubuntu-release-upgrader-6onxj1yd/focal", line 8, in <module>
sys.exit(main())
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeMain.py", line 238, in main
if app.run():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 2081, in run
return self.fullUpgrade()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 1918, in fullUpgrade
if not self.doPostInitialUpdate():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 924, in doPostInitialUpdate
self.quirks.run("PostInitialUpdate")
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 99, in run
func()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 132, in focalPostInitialUpdate
self._calculateSnapSizeRequirements()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 516, in _calculateSnapSizeRequirements
self._prepare_snap_replacement_data()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 956, in _prepare_snap_replacement_data
stdout=subprocess.PIPE).communicate()
File "/usr/lib/python3.6/subprocess.py", line 850, in communicate
stdout = self.stdout.read()
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1072: ordinal not in range(128)
Error in sys.excepthook:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/problem_report.py", line 497, in add_to_existing
self.write(f)
File "/usr/lib/python3/dist-packages/problem_report.py", line 450, in write
block = f.read(1048576)
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0x8b in position 1: ordinal not in range(128)
Original exception was:
Traceback (most recent call last):
File "/tmp/ubuntu-release-upgrader-6onxj1yd/focal", line 8, in <module>
sys.exit(main())
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeMain.py", line 238, in main
if app.run():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 2081, in run
return self.fullUpgrade()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 1918, in fullUpgrade
if not self.doPostInitialUpdate():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 924, in doPostInitialUpdate
self.quirks.run("PostInitialUpdate")
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 99, in run
func()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 132, in focalPostInitialUpdate
self._calculateSnapSizeRequirements()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 516, in _calculateSnapSizeRequirements
self._prepare_snap_replacement_data()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 956, in _prepare_snap_replacement_data
stdout=subprocess.PIPE).communicate()
File "/usr/lib/python3.6/subprocess.py", line 850, in communicate
stdout = self.stdout.read()
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1072: ordinal not in range(128)
root@pc1:~>
---
When will 20.04 be available as an upgrade from 18.04 ?
--
apt-get update
Hit:1 http://security.ubuntu.com/ubuntu bionic-security InRelease
Hit:2 http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit:3 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease
Hit:4 http://ppa.launchpad.net/alex-p/qcad/ubuntu bionic InRelease
Hit:5 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease
Reading package lists... Done
--
root@pc1:~> apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
---
root@pc1:~> do-release-upgrade
Checking for a new Ubuntu release
There is no development version of an LTS available.
To upgrade to the latest non-LTS develoment release
set Prompt=normal in /etc/update-manager/release-upgrades.
--
root@pc1:~> cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.5 LTS"
--
root@pc1:~> cat /etc/update-manager/release-upgrades
# Default behavior for the release upgrader.
[DEFAULT]
# Default prompting behavior, valid options:
#
# never - Never check for, or allow upgrading to, a new release.
# normal - Check to see if a new release is available. If more than one new
# release is found, the release upgrader will attempt to upgrade to
# the supported release that immediately succeeds the
# currently-running release.
# lts - Check to see if a new LTS release is available. The upgrader
# will attempt to upgrade to the first LTS release available after
# the currently-running one. Note that if this option is used and
# the currently-running release is not itself an LTS release the
# upgrader will assume prompt was meant to be normal.
Prompt=lts
---
I then try do-release-upgrade -d and got an error:
root@pc1:~> do-release-upgrade -d
Checking for a new Ubuntu release
Get:1 Upgrade tool signature [1554 B]
Get:2 Upgrade tool [1333 kB]
Fetched 1334 kB in 0s (0 B/s)
authenticate 'focal.tar.gz' against 'focal.tar.gz.gpg'
extracting 'focal.tar.gz'
Reading cache
Checking package manager
Reading package lists... Done
Building dependency tree
Reading state information... Done
Hit http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit http://security.ubuntu.com/ubuntu bionic-security InRelease
Hit http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease
Hit http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease
Hit http://ppa.launchpad.net/alex-p/qcad/ubuntu bionic InRelease
Fetched 0 B in 0s (0 B/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
Checking for installed snaps
Traceback (most recent call last):
File "/tmp/ubuntu-release-upgrader-6onxj1yd/focal", line 8, in <module>
sys.exit(main())
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeMain.py", line 238, in main
if app.run():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 2081, in run
return self.fullUpgrade()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 1918, in fullUpgrade
if not self.doPostInitialUpdate():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 924, in doPostInitialUpdate
self.quirks.run("PostInitialUpdate")
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 99, in run
func()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 132, in focalPostInitialUpdate
self._calculateSnapSizeRequirements()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 516, in _calculateSnapSizeRequirements
self._prepare_snap_replacement_data()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 956, in _prepare_snap_replacement_data
stdout=subprocess.PIPE).communicate()
File "/usr/lib/python3.6/subprocess.py", line 850, in communicate
stdout = self.stdout.read()
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1072: ordinal not in range(128)
Error in sys.excepthook:
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/problem_report.py", line 497, in add_to_existing
self.write(f)
File "/usr/lib/python3/dist-packages/problem_report.py", line 450, in write
block = f.read(1048576)
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0x8b in position 1: ordinal not in range(128)
Original exception was:
Traceback (most recent call last):
File "/tmp/ubuntu-release-upgrader-6onxj1yd/focal", line 8, in <module>
sys.exit(main())
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeMain.py", line 238, in main
if app.run():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 2081, in run
return self.fullUpgrade()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 1918, in fullUpgrade
if not self.doPostInitialUpdate():
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeController.py", line 924, in doPostInitialUpdate
self.quirks.run("PostInitialUpdate")
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 99, in run
func()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 132, in focalPostInitialUpdate
self._calculateSnapSizeRequirements()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 516, in _calculateSnapSizeRequirements
self._prepare_snap_replacement_data()
File "/tmp/ubuntu-release-upgrader-6onxj1yd/DistUpgrade/DistUpgradeQuirks.py", line 956, in _prepare_snap_replacement_data
stdout=subprocess.PIPE).communicate()
File "/usr/lib/python3.6/subprocess.py", line 850, in communicate
stdout = self.stdout.read()
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1072: ordinal not in range(128)
root@pc1:~>
---
When will 20.04 be available as an upgrade from 18.04 ?