How to tell if I am running dmraid?

[mogrify2]

I configured the BIOS with a (fake-raid) 5-disk RAID5 config.
The installed Ubuntu on two Dell desktop servers specifying to use fake raid and entering exactly the same config as in the BIOS.

Now I am not sure whether we are running mdadm or dmraid and not sure how to tell. They both seem to list the disks.

Any help much appreciated as I have to debug a problem with it and not even sure which one I am working with here.

root@mg2:/home/gough# dmraid -l
asr : Adaptec HostRAID ASR (0,1,10)
ddf1 : SNIA DDF1 (0,1,4,5,linear)
hpt37x : Highpoint HPT37X (S,0,1,10,01)
hpt45x : Highpoint HPT45X (S,0,1,10)
isw : Intel Software RAID (0,1,5,01)
jmicron : JMicron ATARAID (S,0,1)
lsi : LSI Logic MegaRAID (0,1,10)
nvidia : NVidia RAID (S,0,1,10,5)
pdc : Promise FastTrack (S,0,1,10)
sil : Silicon Image(tm) Medley(tm) (0,1,10)
via : VIA Software RAID (S,0,1,10)
dos : DOS partitions on SW RAIDs

root@mg2:/home/gough# dmraid -s
*** Group superset isw_cagejhggbf
--> Subset
name : isw_cagejhggbf_Volume0
size : 14846582784
stride : 128
type : raid5_la
status : ok
subsets: 0
devs : 5
spares : 0

root@mg2:/home/gough# dmraid -r
/dev/sda: isw, "isw_cagejhggbf", GROUP, ok, 3907029166 sectors, data@ 0
/dev/sdc: isw, "isw_cagejhggbf", GROUP, ok, 3907029166 sectors, data@ 0
/dev/sde: isw, "isw_cagejhggbf", GROUP, ok, 3907029166 sectors, data@ 0
/dev/sdb: isw, "isw_cagejhggbf", GROUP, ok, 3907029166 sectors, data@ 0
/dev/sdd: isw, "isw_cagejhggbf", GROUP, ok, 3907029166 sectors, data@ 0

root@mg2:/home/gough# dmraid -s -s isw_cagejhggbf
ERROR: either the required RAID set not found or more options required
no raid sets and with names: "isw_cagejhggbf"

root@mg2:/home/gough# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0] [raid1] [raid10]
md126 : active raid5 sda[4] sdb[3] sdc[2] sdd[1] sde[0]
7423287296 blocks super external:/md127/0 level 5, 64k chunk, algorithm 0 [5/5] [UUUUU]

md127 : inactive sdd[4](S) sdc[3](S) sdb[2](S) sda[1](S) sde[0](S)
26005 blocks super external:imsm

unused devices: <none>

root@mg2:/home/gough# mdadm --detail /dev/md126
/dev/md126:
Container : /dev/md/imsm0, member 0
Raid Level : raid5
Array Size : 7423287296 (7079.40 GiB 7601.45 GB)
Used Dev Size : 1855821824 (1769.85 GiB 1900.36 GB)
Raid Devices : 5
Total Devices : 5


State : active
Active Devices : 5
Working Devices : 5
Failed Devices : 0
Spare Devices : 0


Layout : left-asymmetric
Chunk Size : 64K


Consistency Policy : resync

UUID : 1460e363:36bb479d:6caeffc6:a5ffe2ef
Number Major Minor RaidDevice State
4 8 0 0 active sync /dev/sda
3 8 16 1 active sync /dev/sdb
2 8 32 2 active sync /dev/sdc
1 8 48 3 active sync /dev/sdd
0 8 64 4 active sync /dev/sde

[1fallen]

Try:

sudo dmraid -s

[TheFu]

I thought dmraid was deprecated a few LTS releases ago. https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/1028677 says that mdadm has been used on new installs since 14.04.

[1fallen]

It's still going, and some devices need it.
dmraid uses the Linux device-mapper to create devices with respective
mappings for the ATARAID sets discovered.
.
The following formats are supported:

Highpoint HPT37X/HPT45X
Intel Software RAID
LSI Logic MegaRAID
NVidia NForce RAID (nvraid)
Promise FastTrack
Silicon Image(tm) Medley(tm)
VIA Software RAID
.
***Please read the documentation in /usr/share/doc/dmraid BEFORE attempting***
any use of this software. Improper use can cause data loss!
https://launchpad.net/ubuntu/bionic/amd64/dmraid/1.0.0.rc16-8ubuntu1
And: http://manpages.ubuntu.com/manpages/bionic/man8/dmraid.8.html
I agree though I like to use "mdadm" for my set-up's.

[mogrify2]

Thanks 1fallen, I already posted the dmraid -s output
My problem is interpreting it as both dmraid and mdadm seem to be reporting positively (with the exception of dmraid -s -s isw_cagejhggbf)

... so I can't tell which one is actually controlling the volume before I go and start messing with it

[mogrify2]

I am wondering, is it possible I somehow accidentally set up both, and they are interfering with each other?

[1fallen]

Thanks 1fallen, I already posted the dmraid -s output

So you did, :) If stuff isn't in code tags I really don't bother reading a lot.
Not trying to sound rude or harsh, but code tags are very important here. ;)

For raid5 you need the dm-raid module, but not for a raid0.

FYI, unless you are dual booting with Windows you should use conventional linux md raid rather than fake/dmraid, as md is far better supported and properly handles failures and reshapes, which fakeraid does not.

If you want to boot an IMSM/ISW raid with dmraid and without mdadm, you still have to install the mdadm package in a kickstart minimal install and have to specify "noiswmd" or "rd_NO_MDIMSM" on the kernel command line.+When booting an IMSM/ISW RAID with dmraid but without mdadm, the mdadm package still needs to be installed on the system in a kickstart minimal install with the "noiswmd" or "rd_NO_MDIMSM" parameters specified.