need some help with my ssd

[guece]

http://paste.ubuntu.com/p/P847jqYZ3w/

[yancek]

Why are you posting? The boot repair output shows that you are booting from a Linux Mint on a usb and you have a 119GB drive with nothing on it, no partitions or filesystem. Interestingly, the efibootmgr output shows and entry for Linpux Lite. Did this computer come with Linpus Lite. What are your intentions? Do you want to install Mint?

[howefield]

Thread moved to the "MINT" forum.

[guece]

no i dont want mint
there has to be a win 10 64 installation but i cannot boot into it
so i tryed with usb mint to look at but i have no clue how to fix that

[oldfred]

You show no evidence of Windows or any NTFS partitions.
You do show this error:

Invalid MBR Signature found.


So you may have NTFS partitions that cannot be seen.

But new systems are required by vendors to use UEFI with gpt partitioning, not MBR partitioning.
And you do not have a Windows UEFI boot entry in UEFI boot menu.

Generally better to use Windows tools for Windows.
Does testdisk show anything on sda?
http://www.cgsecurity.org/wiki/TestDisk

http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step

[guece]

thank you for reply
testdisk didnt find partion



Sun Feb 17 18:52:39 2019
Command line: TestDisk

TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
OS: Linux, kernel 4.15.0-20-generic (#21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018) x86_64
Compiler: GCC 7.2
ext2fs lib: 1.44.1, ntfs lib: libntfs-3g, reiserfs lib: none, ewf lib: none, curses lib: ncurses 6.0
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size 250069680 sectors
/dev/sda: user_max 250069680 sectors
/dev/sda: native_max 250069680 sectors
/dev/sda: dco 250069680 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 0 sectors, sector size=512
Hard disk list
Disk /dev/sda - 128 GB / 119 GiB - CHS 15566 255 63, sector size=512 - HFS128G39TND-N210A, S/N:EI83N068410503Q1A, FW:30001P10
Disk /dev/sdb - 15 GB / 14 GiB - CHS 14875 64 32, sector size=512 - SanDisk Ultra, FW:1.00
Disk /dev/sdc - 16 GB / 14 GiB - CHS 15259 64 32, sector size=512 - Kingston DT 101 II, FW:1.00

Partition table type default to Intel
Disk /dev/sda - 128 GB / 119 GiB - HFS128G39TND-N210A
Partition table type: EFI GPT

Analyse Disk /dev/sda - 128 GB / 119 GiB - CHS 15566 255 63
Bad GPT partition, invalid signature.
Trying alternate GPT
Bad GPT partition, invalid signature.
Current partition structure:
Bad GPT partition, invalid signature.
Trying alternate GPT
Bad GPT partition, invalid signature.

search_part()
Disk /dev/sda - 128 GB / 119 GiB - CHS 15566 255 63

Results

interface_write()

No partition found or selected for recovery
simulate write!

TestDisk exited normally.

[oldfred]

Please use code tags with longer text or terminal output.
Easy to add code tags with forum's advanced editor and # icon.

What does this show?
sudo gdisk -l /dev/sda

But you are not showing NTFS anywhere. Did you overwrite entire drive with previous install?

[guece]

mint@mint:~$ sudo gdisk -l /dev/sda
GPT fdisk (gdisk) version 1.0.3

Partition table scan:
MBR: not present
BSD: not present
APM: not present
GPT: not present

Creating new GPT entries.
Disk /dev/sda: 250069680 sectors, 119.2 GiB
Model: HFS128G39TND-N21
Sector size (logical/physical): 512/4096 bytes
Disk identifier (GUID): 3D9FFE91-D501-4B3E-837D-3FC993A9FFA4
Partition table holds up to 128 entries
Main partition table begins at sector 2 and ends at sector 33
First usable sector is 34, last usable sector is 250069646
Partitions will be aligned on 2048-sector boundaries
Total free space is 250069613 sectors (119.2 GiB)

Number Start (sector) End (sector) Size Code Name
mint@mint:~$


i got the laptop from a friend he says it was windows 10 home installed
he said it stopped worked and doesnt find a boot parition

[oldfred]

It looks like it stopped working because he erased it.

[guece]

any chance to get it back

i need the recovery part to get a fresh win install for him

[yancek]

In post 6, you show the following: Partition table type: EFI GPT and just below that it shows: Bad GPT partition, invalid signature
It looks like everything was deleted regarding windows including the EFI, system and recovery partitions. If there is any possibility, I expect you would need some type of windows software.

[oldfred]

If system is a newer UEFI system, it has product key inside UEFI. So if you reinstall in UEFI boot mode, it will automatically use valid product key.

Product key now in UEFI/BIOS
http://reviews.cnet.com/8301-33642_7-57554240-292/windows-8-moves-to-bios-based-product-keys/
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/bipass-uefi-provided-product-key-to-install/a271067b-d655-4b46-8b52-b3f191b9370c
https://support.microsoft.com/en-us/help/10749/windows-product-key

[guece]

yes i tried just to install win 10 from usb i read also that the product key should be in the bios
but the instalation stopped because my ssd will probably be broken
befor i saw in mint linux that the ssd will be broken in the next 24 hour

[guece]

can someone please explain what is going on with my ssd

i dont understand what this errors mean and how i can fix it

the ssd dont allow to format or partition

smartctl


mint@mint:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: HFS128G39TND-N210A
Serial Number: EI83N068410503Q1A
Firmware Version: 30001P10
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Mon Feb 18 11:58:32 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
No failed Attributes found.

General SMART Values:
Offline data collection status: (0x03) Offline data collection activity
is in progress.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 32) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 166 166 006 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 253 100 036 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 52
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 517
100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 181920
168 Unknown_Attribute 0x0032 253 100 000 Old_age Always - 0
169 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 20
171 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 100 100 000 Old_age Offline - 11
175 Program_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
176 Erase_Fail_Count_Chip 0x0032 253 253 000 Old_age Always - 0
177 Wear_Leveling_Count 0x0032 100 100 000 Old_age Always - 5
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 23
179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 123
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 2517
184 End-to-End_Error 0x0032 253 253 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 030 000 000 Old_age Always - 30 (Min/Max 12/43)
195 Hardware_ECC_Recovered 0x0032 253 253 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 253 100 036 Old_age Always - 0
198 Offline_Uncorrectable 0x0032 253 253 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0032 253 253 000 Old_age Always - 0
204 Soft_ECC_Correction 0x000e 100 097 000 Old_age Always - 12
212 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 549
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 153
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 1789
250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 8721

SMART Error Log Version: 1
ATA Error Count: 551 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 551 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 41 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 30 00 00 00 40 40 00:41:50.260 WRITE FPDMA QUEUED
47 00 01 30 08 00 a0 a0 00:41:50.260 READ LOG DMA EXT
ef 10 02 00 00 00 a0 a0 00:41:50.260 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 e0 00:41:50.260 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 a0 00:41:50.260 IDENTIFY DEVICE

Error 550 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 41 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 28 00 00 00 40 40 00:41:50.230 WRITE FPDMA QUEUED
47 00 01 30 08 00 a0 a0 00:41:50.230 READ LOG DMA EXT
ef 10 02 00 00 00 a0 a0 00:41:50.230 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 e0 00:41:50.230 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 a0 00:41:50.230 IDENTIFY DEVICE

Error 549 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 41 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 90 00 00 00 40 40 00:41:50.200 WRITE FPDMA QUEUED
47 00 01 30 08 00 a0 a0 00:41:50.200 READ LOG DMA EXT
ef 10 02 00 00 00 a0 a0 00:41:50.200 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 e0 00:41:50.200 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 a0 00:41:50.200 IDENTIFY DEVICE

Error 548 occurred at disk power-on lifetime: 52 hours (2 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 41 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 80 00 00 00 40 40 00:41:50.150 WRITE FPDMA QUEUED
60 08 78 18 00 00 40 40 00:41:36.860 READ FPDMA QUEUED
60 08 70 08 00 00 40 40 00:41:36.860 READ FPDMA QUEUED
60 08 68 00 00 00 40 40 00:41:36.860 READ FPDMA QUEUED
60 08 e8 00 10 00 40 40 00:41:36.860 READ FPDMA QUEUED

Error 547 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 41 00 00 00 00 00 Error: ABRT at LBA = 0x00000000 = 0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 18 e0 00 00 00 40 40 00:11:03.280 WRITE FPDMA QUEUED
61 18 d8 98 c2 e7 40 40 00:11:03.280 WRITE FPDMA QUEUED
47 00 01 30 08 00 a0 a0 00:11:03.280 READ LOG DMA EXT
ef 10 02 00 00 00 a0 a0 00:11:03.280 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 e0 00:11:03.280 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported



and hdparm


mint@mint:~$ sudo hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
Model Number: HFS128G39TND-N210A
Serial Number: EI83N068410503Q1A
Firmware Revision: 30001P10
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 0
heads 16 0
sectors/track 63 0
--
LBA user addressable sectors: 250069680
LBA48 user addressable sectors: 250069680
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 122104 MBytes
device size with M = 1000*1000: 128035 MBytes (128 GB)
cache/buffer size = unknown
Form Factor: unknown (0x0007]
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Advanced power management level: disabled
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
WRITE_DMA_QUEUED_FUA_EXT
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
Non-Zero buffer offsets in DMA Setup FIS
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Device Sleep (DEVSLP)
* SANITIZE feature set
* CRYPTO_SCRAMBLE_EXT command
* BLOCK_ERASE_EXT command
* reserved 69[4]
* DOWNLOAD MICROCODE DMA command
* Data Set Management TRIM supported (limit 1 block)
* Deterministic read data after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Device Sleep:
DEVSLP Exit Timeout (DETO): 20 ms (default)
Minimum DEVSLP Assertion Time (MDAT): 10 ms (default)
Checksum: correct


and fdisk returns me
mint@mint:~$ sudo fdisk /dev/sda

Welcome to fdisk (util-linux 2.31.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x4243c433.

Command (m for help): g
Created a new GPT disklabel (GUID: B96E04FF-2F5E-B041-AC48-96251BB6E200).

Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
/dev/sda: close device failed: Input/output error

mint@mint:~$