sboyce
November 27th, 2018, 04:52 PM
I have 2 touch screens not working and one that works.
Bus 001 Device 010: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen on 2 ODROID-C2's, touch not working. I also tried xinput_calibrator.
root@hiqsdr64:~# cat /usr/share/X11/xorg.conf.d/99-calibration.conf
Section "InputClass"
Identifier "calibration"
MatchProduct "eGalax Inc. USB TouchController"
Option "MinX" "-137"
Option "MaxX" "65508"
Option "MinY" "637"
Option "MaxY" "64898"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
Bus 001 Device 004: ID 0eef:0005 D-WAV Scientific Co., Ltd on one ODROID-C2 works out of the box with no /usr/share/X11/xorg.conf.d/99-calibration.conf.
Bus 001 Device 010: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen on 2 ODROID-C2's, touch not working. I also tried xinput_calibrator.
root@hiqsdr64:~# cat /usr/share/X11/xorg.conf.d/99-calibration.conf
Section "InputClass"
Identifier "calibration"
MatchProduct "eGalax Inc. USB TouchController"
Option "MinX" "-137"
Option "MaxX" "65508"
Option "MinY" "637"
Option "MaxY" "64898"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
Bus 001 Device 004: ID 0eef:0005 D-WAV Scientific Co., Ltd on one ODROID-C2 works out of the box with no /usr/share/X11/xorg.conf.d/99-calibration.conf.