alynur2
October 18th, 2018, 07:48 PM
H guys, I finally upgraded my LXDE 16.04 to Lubuntu 18.04. Since these new problems have occured due to the upgrade, I figure I'll list them here and you guys can guide me as to if I should start a new post in a different section.
1. First off I get an error message whenever I run sudo apt update, that being:
E: The repository 'http://ppa.launchpad.net/lubuntu-desktop/ppa/ubuntu bionic Release' does not have a Release file.
2. Synaptic Manager will not launch. I've removed it and reinstalled it but still no go.
3. My printer won't print. I've removed it and re-added it numerous times both in Printers and Hplip Toolbox.It will show me the ink levels in Hplip but no matter what I try to print, nothing happens. The printer works fine in any of my other distros.
4. A few of my apps won't launch, like Timeshift, Gparted and Xsane image scanning program, get an failed to open device message.
There may be others but I haven't checked everything yet.
Here is my computer info.
albert@albert-desktop:~$ inxi -FzSystem: Host: albert-desktop Kernel: 4.15.0-36-generic x86_64 bits: 64
Desktop: LXDE (Openbox 3.6.1) Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop Mobo: ASRock model: AM1B-M serial: N/A
BIOS: American Megatrends v: P1.50 date: 04/29/2015
CPU: Quad core AMD Athlon 5370 APU with Radeon R3 (-MCP-)
cache: 2048 KB
clock speeds: max: 2200 MHz 1: 938 MHz 2: 918 MHz 3: 963 MHz
4: 1029 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
Display Server: x11 (X.Org 1.19.6 )
drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1024x768@75.03hz, 1024x768@75.03hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 4.15.0-36-generic, LLVM 6.0.0)
version: 3.3 Mesa 18.0.5
Audio: Card-1 Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.15.0-36-generic
Network: Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (32.0% used)
ID-1: /dev/sda model: WDC_WD5000AUDX size: 500.1GB
Partition: ID-1: / size: 49G used: 33G (71%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.65GB used: 0.00GB (0%)
fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 23.1C mobo: N/A gpu: 56.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 261 Uptime: 1:09 Memory: 2111.9/7914.6MB
Client: Shell (bash) inxi: 2.3.56
1. First off I get an error message whenever I run sudo apt update, that being:
E: The repository 'http://ppa.launchpad.net/lubuntu-desktop/ppa/ubuntu bionic Release' does not have a Release file.
2. Synaptic Manager will not launch. I've removed it and reinstalled it but still no go.
3. My printer won't print. I've removed it and re-added it numerous times both in Printers and Hplip Toolbox.It will show me the ink levels in Hplip but no matter what I try to print, nothing happens. The printer works fine in any of my other distros.
4. A few of my apps won't launch, like Timeshift, Gparted and Xsane image scanning program, get an failed to open device message.
There may be others but I haven't checked everything yet.
Here is my computer info.
albert@albert-desktop:~$ inxi -FzSystem: Host: albert-desktop Kernel: 4.15.0-36-generic x86_64 bits: 64
Desktop: LXDE (Openbox 3.6.1) Distro: Ubuntu 18.04.1 LTS
Machine: Device: desktop Mobo: ASRock model: AM1B-M serial: N/A
BIOS: American Megatrends v: P1.50 date: 04/29/2015
CPU: Quad core AMD Athlon 5370 APU with Radeon R3 (-MCP-)
cache: 2048 KB
clock speeds: max: 2200 MHz 1: 938 MHz 2: 918 MHz 3: 963 MHz
4: 1029 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
Display Server: x11 (X.Org 1.19.6 )
drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
Resolution: 1024x768@75.03hz, 1024x768@75.03hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 4.15.0-36-generic, LLVM 6.0.0)
version: 3.3 Mesa 18.0.5
Audio: Card-1 Advanced Micro Devices [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
driver: snd_hda_intel
Card-2 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.15.0-36-generic
Network: Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
driver: r8169
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 500.1GB (32.0% used)
ID-1: /dev/sda model: WDC_WD5000AUDX size: 500.1GB
Partition: ID-1: / size: 49G used: 33G (71%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.65GB used: 0.00GB (0%)
fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 23.1C mobo: N/A gpu: 56.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 261 Uptime: 1:09 Memory: 2111.9/7914.6MB
Client: Shell (bash) inxi: 2.3.56