guicar
May 24th, 2018, 09:05 AM
Hello world !
I have an Sdcard related issue on my fresh Ubuntu 18.0 install.
Mmc2 is my future boot device as I started from a live Usb cd stick
When i put this same Sd card on a Cardreader hub then Ubuntu boot is fine and I don't have any error using dmesg.
So the issue is not related to the card itself.
Dmesg result when booting on live usb stick
[ 2331.156735] mmcblk2: error -110 sending status command, retrying
[ 2331.213011] mmc2: Tuning timeout, falling back to fixed sampling clock
[ 2331.213737] mmcblk2: error -110 sending status command, retrying
[ 2331.214485] mmcblk2: error -110 sending status command, aborting
[ 2331.214518] print_req_error: I/O error, dev mmcblk2, sector 194432
[ 2341.464673] mmc2: Timeout waiting for hardware interrupt.
[ 2341.464703] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2341.464726] mmc2: sdhci: Sys addr: 0x00000008 | Version: 0x00001002
[ 2341.464739] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 2341.464753] mmc2: sdhci: Argument: 0x0002f780 | Trn mode: 0x0000003b
[ 2341.464767] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2341.464780] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2341.464793] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2341.464806] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2341.464819] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2341.464832] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2341.464846] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2341.464859] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2341.464873] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2341.464886] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2341.464897] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2341.464912] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2341.464921] mmc2: sdhci: ============================================
[ 2341.465465] mmcblk2: error -110 sending status command, retrying
[ 2341.466184] mmcblk2: error -110 sending status command, retrying
[ 2341.466384] mmcblk2: error -110 sending status command, aborting
[ 2341.466413] print_req_error: I/O error, dev mmcblk2, sector 194432
[ 2341.466445] Buffer I/O error on dev mmcblk2p1, logical block 24048, async page read
[ 2351.704490] mmc2: Timeout waiting for hardware interrupt.
[ 2351.704515] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2351.704532] mmc2: sdhci: Sys addr: 0x00000002 | Version: 0x00001002
[ 2351.704546] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000002
[ 2351.704560] mmc2: sdhci: Argument: 0x00000802 | Trn mode: 0x0000003b
[ 2351.704573] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2351.704587] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2351.704600] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2351.704613] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2351.704628] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2351.704641] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2351.704655] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2351.704670] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2351.704684] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2351.704697] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2351.704710] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2351.704723] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2351.704732] mmc2: sdhci: ============================================
[ 2351.705360] mmcblk2: error -110 sending status command, retrying
[ 2351.706102] mmcblk2: error -110 sending status command, retrying
[ 2351.706285] mmcblk2: error -110 sending status command, aborting
[ 2351.706315] print_req_error: I/O error, dev mmcblk2, sector 2050
[ 2351.706550] EXT4-fs (mmcblk2p1): unable to read superblock
[ 2361.944264] mmc2: Timeout waiting for hardware interrupt.
[ 2361.944291] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2361.944312] mmc2: sdhci: Sys addr: 0x00000002 | Version: 0x00001002
[ 2361.944328] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000002
[ 2361.944341] mmc2: sdhci: Argument: 0x00000802 | Trn mode: 0x0000003b
[ 2361.944355] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2361.944368] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2361.944381] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2361.944394] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2361.944407] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2361.944420] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2361.944434] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2361.944447] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2361.944460] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2361.944474] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2361.944485] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2361.944498] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2361.944510] mmc2: sdhci: ============================================
cat /proc/version
Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018
Device Information
BIOS Information
Vendor: American Megatrends Inc.
Version: 5.11
Release Date: 10/12/2017
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 6144 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 5.11
System Information
Manufacturer: CHUWI INNOVATION AND TECHNOLOGY(SHENZHEN)CO.LTD
Product Name: Hi10 plus tablet
Version: Hampoo_reserve
Serial Number: 0123456789ABCDEF
UUID: 03000200-0400-0500-0006-000700080009
Wake-up Type: Power Switch
SKU Number: P1D6_C189B_Hi10_plus
Family: CherryTrail CR -- Hampoo
Processor Information
Socket Designation: SOCKET 0
Type: Central Processor
Family: Atom
Manufacturer: Intel
ID: C4 06 04 00 FF FB EB BF
Signature: Type 0, Family 6, Model 76, Stepping 4
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
Voltage: 1.2 V
External Clock: 80 MHz
Max Speed: 2400 MHz
Current Speed: 1440 MHz
Status: Populated, Enabled
Upgrade: Socket BGA1155
L1 Cache Handle: 0x0032
L2 Cache Handle: 0x0033
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Fill By OEM
Part Number: Fill By OEM
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Any input is most welcome ;)
I have an Sdcard related issue on my fresh Ubuntu 18.0 install.
Mmc2 is my future boot device as I started from a live Usb cd stick
When i put this same Sd card on a Cardreader hub then Ubuntu boot is fine and I don't have any error using dmesg.
So the issue is not related to the card itself.
Dmesg result when booting on live usb stick
[ 2331.156735] mmcblk2: error -110 sending status command, retrying
[ 2331.213011] mmc2: Tuning timeout, falling back to fixed sampling clock
[ 2331.213737] mmcblk2: error -110 sending status command, retrying
[ 2331.214485] mmcblk2: error -110 sending status command, aborting
[ 2331.214518] print_req_error: I/O error, dev mmcblk2, sector 194432
[ 2341.464673] mmc2: Timeout waiting for hardware interrupt.
[ 2341.464703] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2341.464726] mmc2: sdhci: Sys addr: 0x00000008 | Version: 0x00001002
[ 2341.464739] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 2341.464753] mmc2: sdhci: Argument: 0x0002f780 | Trn mode: 0x0000003b
[ 2341.464767] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2341.464780] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2341.464793] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2341.464806] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2341.464819] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2341.464832] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2341.464846] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2341.464859] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2341.464873] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2341.464886] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2341.464897] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2341.464912] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2341.464921] mmc2: sdhci: ============================================
[ 2341.465465] mmcblk2: error -110 sending status command, retrying
[ 2341.466184] mmcblk2: error -110 sending status command, retrying
[ 2341.466384] mmcblk2: error -110 sending status command, aborting
[ 2341.466413] print_req_error: I/O error, dev mmcblk2, sector 194432
[ 2341.466445] Buffer I/O error on dev mmcblk2p1, logical block 24048, async page read
[ 2351.704490] mmc2: Timeout waiting for hardware interrupt.
[ 2351.704515] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2351.704532] mmc2: sdhci: Sys addr: 0x00000002 | Version: 0x00001002
[ 2351.704546] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000002
[ 2351.704560] mmc2: sdhci: Argument: 0x00000802 | Trn mode: 0x0000003b
[ 2351.704573] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2351.704587] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2351.704600] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2351.704613] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2351.704628] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2351.704641] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2351.704655] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2351.704670] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2351.704684] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2351.704697] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2351.704710] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2351.704723] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2351.704732] mmc2: sdhci: ============================================
[ 2351.705360] mmcblk2: error -110 sending status command, retrying
[ 2351.706102] mmcblk2: error -110 sending status command, retrying
[ 2351.706285] mmcblk2: error -110 sending status command, aborting
[ 2351.706315] print_req_error: I/O error, dev mmcblk2, sector 2050
[ 2351.706550] EXT4-fs (mmcblk2p1): unable to read superblock
[ 2361.944264] mmc2: Timeout waiting for hardware interrupt.
[ 2361.944291] mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2361.944312] mmc2: sdhci: Sys addr: 0x00000002 | Version: 0x00001002
[ 2361.944328] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000002
[ 2361.944341] mmc2: sdhci: Argument: 0x00000802 | Trn mode: 0x0000003b
[ 2361.944355] mmc2: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000017
[ 2361.944368] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 2361.944381] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2361.944394] mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2361.944407] mmc2: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 2361.944420] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2361.944434] mmc2: sdhci: Caps: 0x0568c8b2 | Caps_1: 0x00000807
[ 2361.944447] mmc2: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2361.944460] mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x301017a2
[ 2361.944474] mmc2: sdhci: Resp[2]: 0x55534430 | Resp[3]: 0x00000000
[ 2361.944485] mmc2: sdhci: Host ctl2: 0x0000800b
[ 2361.944498] mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x35820200
[ 2361.944510] mmc2: sdhci: ============================================
cat /proc/version
Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018
Device Information
BIOS Information
Vendor: American Megatrends Inc.
Version: 5.11
Release Date: 10/12/2017
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 6144 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 5.11
System Information
Manufacturer: CHUWI INNOVATION AND TECHNOLOGY(SHENZHEN)CO.LTD
Product Name: Hi10 plus tablet
Version: Hampoo_reserve
Serial Number: 0123456789ABCDEF
UUID: 03000200-0400-0500-0006-000700080009
Wake-up Type: Power Switch
SKU Number: P1D6_C189B_Hi10_plus
Family: CherryTrail CR -- Hampoo
Processor Information
Socket Designation: SOCKET 0
Type: Central Processor
Family: Atom
Manufacturer: Intel
ID: C4 06 04 00 FF FB EB BF
Signature: Type 0, Family 6, Model 76, Stepping 4
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
Voltage: 1.2 V
External Clock: 80 MHz
Max Speed: 2400 MHz
Current Speed: 1440 MHz
Status: Populated, Enabled
Upgrade: Socket BGA1155
L1 Cache Handle: 0x0032
L2 Cache Handle: 0x0033
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Fill By OEM
Part Number: Fill By OEM
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Any input is most welcome ;)