vnv
March 30th, 2016, 03:58 PM
Hi all,
I am trying to use 90 degrees clockwise rotated touch screen from elo (ET1509L-8UWA).
Settings in Ubuntu rotated it without problems but after xinput_calibrate axes seem inverted.
xinput list returns:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB id=10 [slave pointer (2)]
⎜ ↳ PixArt HP USB Optical Mouse id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ NOVATEK USB Keyboard id=12 [slave keyboard (3)]
↳ NOVATEK USB Keyboard id=13 [slave keyboard (3)]
↳ HP WMI hotkeys id=14 [slave keyboard (3)]
xinput_calibrator --output-type xinput
Setting calibration data: 0, 4095, 0, 4095
Calibrating EVDEV driver for "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" id=10
current calibration values (from XInput): min_x=0, max_x=4095 and min_y=0, max_y=4095
Doing dynamic recalibration:
Swapping X and Y axis...
Setting calibration data: 3616, 3569, 1154, 1158
--> Making the calibration permanent <--
Install the 'xinput' tool and copy the command(s) below in a script that starts with your X session
xinput set-int-prop "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" "Evdev Axis Calibration" 32 3616 3569 1154 1158
xinput set-int-prop "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" "Evdev Axes Swap" 8 1
Could somebody help with this please?
I am trying to use 90 degrees clockwise rotated touch screen from elo (ET1509L-8UWA).
Settings in Ubuntu rotated it without problems but after xinput_calibrate axes seem inverted.
xinput list returns:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB id=10 [slave pointer (2)]
⎜ ↳ PixArt HP USB Optical Mouse id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ NOVATEK USB Keyboard id=12 [slave keyboard (3)]
↳ NOVATEK USB Keyboard id=13 [slave keyboard (3)]
↳ HP WMI hotkeys id=14 [slave keyboard (3)]
xinput_calibrator --output-type xinput
Setting calibration data: 0, 4095, 0, 4095
Calibrating EVDEV driver for "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" id=10
current calibration values (from XInput): min_x=0, max_x=4095 and min_y=0, max_y=4095
Doing dynamic recalibration:
Swapping X and Y axis...
Setting calibration data: 3616, 3569, 1154, 1158
--> Making the calibration permanent <--
Install the 'xinput' tool and copy the command(s) below in a script that starts with your X session
xinput set-int-prop "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" "Evdev Axis Calibration" 32 3616 3569 1154 1158
xinput set-int-prop "Elo TouchSystems, Inc. Elo TouchSystems 2700 IntelliTouch(r) USB" "Evdev Axes Swap" 8 1
Could somebody help with this please?