View Full Version : [ubuntu] DHCP server configuration on a VLAN with Various IP Series
Johnson_prabu
September 7th, 2015, 12:30 PM
how to configure many IP series on a DHCP server.
In my office i've configured a DHCP server which is working fine. I need to add more Class c private IPs on it. Can you guide it....
Current setup: DHCP server iP 192.168.3.9
DHCP Range - 192.168.3.11 - 200
Req setup
need to add 192.168.2. * IP series on the same server.
howefield
September 7th, 2015, 12:32 PM
Thread moved to the "Server Platforms" forum.
darkod
September 7th, 2015, 10:16 PM
It would help if you specify which program are you using for dhcp. The built-in in ubuntu? How was it called, isc-dhcp-something?
Also, do you plan to have different dhcp for different VLAN? Otherwise you will run into conflict with more than one dhcp on same LAN/VLAN. List the VLAN interfaces so that people have more info to help you.
SeijiSensei
September 8th, 2015, 05:39 PM
Why not start with the remaining .3 addresses from 192.168.3.201-254?
You can't support multiple class-C address blocks on a single network interface. If you need more than the 253 available addresses in a single class-C (/24), you should use a different network mask. You could use 192.168.2.0/23 which gives you addresses from 192.168.2.1 through 192.168.3.254. You can play around with masks using this convenient tool: http://jodies.de/ipcalc
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.