ulao2
August 13th, 2015, 11:37 PM
I had a friend of mine install a software raid on my linux box and one drive seems to have developed bad sectors on the raid section. When I boot I get a grey screen. If I hit escape in time I get a secondary boot options that allow me to boot with a degraded raid config. the OS comes up and works fine but I'd like to have that raid rebuilt.
I'm guessing you need to know a bit of info but I'm not sure what so please ask and ill get what I can.
Here is fstab if that helps.
UUID=6064645f-2a04-4fb1-8807-89886c7ecd4d / ext4 errors=remount-ro 0 1
UUID=8106df35-b006-4c0d-b509-9117ad3fd1f7 none swap sw 0 0
UUID=ff7bcec5-e199-48db-89e5-2f329f69867a none swap sw 0 0
mdstat says
cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sda1[0]
55664097 blocks super 1.2 [2/1] [U_]
unused devices: <none>
mdadm says
sudo mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Fri Feb 15 15:49:56 2013
Raid Level : raid1
Array Size : 55664097 (53.09 GiB 57.00 GB)
Used Dev Size : 55664097 (53.09 GiB 57.00 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Update Time : Thu Aug 13 18:35:22 2015
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : sysresccd:0
UUID : bba30334:f469b355:3db73527:c18a34ba
Events : 2737145
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
How does one allow raid to re image the new drive?
I'm guessing you need to know a bit of info but I'm not sure what so please ask and ill get what I can.
Here is fstab if that helps.
UUID=6064645f-2a04-4fb1-8807-89886c7ecd4d / ext4 errors=remount-ro 0 1
UUID=8106df35-b006-4c0d-b509-9117ad3fd1f7 none swap sw 0 0
UUID=ff7bcec5-e199-48db-89e5-2f329f69867a none swap sw 0 0
mdstat says
cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sda1[0]
55664097 blocks super 1.2 [2/1] [U_]
unused devices: <none>
mdadm says
sudo mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Fri Feb 15 15:49:56 2013
Raid Level : raid1
Array Size : 55664097 (53.09 GiB 57.00 GB)
Used Dev Size : 55664097 (53.09 GiB 57.00 GB)
Raid Devices : 2
Total Devices : 1
Persistence : Superblock is persistent
Update Time : Thu Aug 13 18:35:22 2015
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
Name : sysresccd:0
UUID : bba30334:f469b355:3db73527:c18a34ba
Events : 2737145
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
How does one allow raid to re image the new drive?