Xiguus
May 19th, 2015, 11:09 AM
Hi all,
I have an ASUS laptop with several OS's installed, ie Windows with 12.04 wubi, a 14.04 and a Manjaro 8. Yesterday I ran the software update on the 14.04, which included an update of the Ubuntu base files. When I rebooted the Trusty it rewrote my grub menu.
I can still boot to the Windows and wubi 12.04 installations, but when I try to boot the Manjaro installation I get various screen messages which finish with "end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(0,0)".
I've searched around a bit and found that this message is typical of a missing initramfs, which doesn't apply in this case as both Manjaro kernels have an initramfs present.
I'm thinking I have a GRUB problem rather than a kernel problem, because each linux has it's own grub.cfg and it's not clear to me how they resolve priority, or how I can get them (back) into a reliable order. "It all seemed to work just fine when the Manjaro boot config was in charge." My bootinfoscript RESULTS.txt is attached: If anyone can give me some advice on how to proceed it will be very much appreciated.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr /wubildr.mbr
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files: /ubuntu/winboot/wubildr /ubuntu/winboot/wubildr.mbr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sda5/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Manjaro Linux () ()
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/syslinux/syslinux.cfg
sda8: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 34,812,854 34,810,807 1c Hidden W95 FAT32 (LBA)
/dev/sda2 * 34,813,952 279,007,231 244,193,280 7 NTFS / exFAT / HPFS
/dev/sda3 279,009,278 976,768,064 697,758,787 f W95 Extended (LBA)
/dev/sda5 279,009,280 360,929,279 81,920,000 7 NTFS / exFAT / HPFS
/dev/sda6 360,932,418 627,177,661 266,245,244 83 Linux
/dev/sda7 627,177,663 963,048,554 335,870,892 83 Linux
/dev/sda8 963,048,618 976,768,064 13,719,447 82 Linux swap / Solaris
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 dc417f35-8f7a-4d06-bd52-2ac271c7db33 ext4
/dev/sda1 3C98-AC5D vfat RECOVERY
/dev/sda2 AEB684D3B6849D89 ntfs OS
/dev/sda5 3AA6870AA686C5BB ntfs DATA
/dev/sda6 7a091e3e-545a-4e43-ba7c-4da34f7507cf ext4 UBU14
/dev/sda7 0de56d23-b047-4a1b-9fd7-33f87e182578 ext4 MJOBX
/dev/sda8 68e2b1d1-3827-45fc-a039-486ba2e052d3 swap SWAP
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda5 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
======================== sda5/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en_AU
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-83-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.2.0-83-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.2.0-83-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-83-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.2.0-83-generic-pae ...'
linux /boot/vmlinuz-3.2.0-83-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-83-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-82-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.2.0-82-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.2.0-82-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-82-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.2.0-82-generic-pae ...'
linux /boot/vmlinuz-3.2.0-82-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-82-generic-pae
}
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Ubuntu, with Linux 3.13.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Ubuntu, with Linux 3.13.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-recovery-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Manjaro Linux' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.14.40-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.14.40-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
============================= sda5/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda5/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
19.671958923 = 21.122605056 boot/grub/grub.cfg 1
17.124904633 = 18.387726336 boot/initrd.img-3.2.0-82-generic-pae 3
15.781250000 = 16.944988160 boot/initrd.img-3.2.0-83-generic-pae 2
15.895320892 = 17.067470848 boot/vmlinuz-3.2.0-82-generic-pae 2
17.086730957 = 18.346737664 boot/vmlinuz-3.2.0-83-generic-pae 2
15.781250000 = 16.944988160 initrd.img 2
17.124904633 = 18.387726336 initrd.img.old 3
17.086730957 = 18.346737664 vmlinuz 2
15.895320892 = 17.067470848 vmlinuz.old 2
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_AU
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
menuentry 'Ubuntu, with Linux 3.13.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
echo 'Loading Linux 3.13.0-52-generic ...'
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-recovery-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
echo 'Loading Linux 3.13.0-52-generic ...'
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-52-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-3C98-AC5D' {
insmod part_msdos
insmod fat
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3C98-AC5D
else
search --no-floppy --fs-uuid --set=root 3C98-AC5D
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows 7 (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-AEB684D3B6849D89' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 AEB684D3B6849D89
else
search --no-floppy --fs-uuid --set=root AEB684D3B6849D89
fi
parttool ${root} hidden-
chainloader +1
}
menuentry 'Manjaro Linux (0.8.12) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
submenu 'Advanced options for Manjaro Linux (0.8.12) (on /dev/sda7)' $menuentry_id_option 'osprober-gnulinux-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
menuentry 'Manjaro Linux (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64 - fallback initramfs) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.14.40-1-MANJARO x64) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.14-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.14.40-1-MANJARO x64 - fallback initramfs) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.14-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
#UUID=ec1904e0-8a66-469a-9d8a-a827276a3107 none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
270.313126564 = 290.246509568 boot/grub/grub.cfg 2
200.709973335 = 215.510692864 boot/initrd.img-3.13.0-52-generic 1
200.416096687 = 215.195145216 boot/vmlinuz-3.13.0-52-generic 2
200.709973335 = 215.510692864 initrd.img 1
200.416096687 = 215.195145216 vmlinuz 2
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="${saved_entry}"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
set menu_color_normal=light-gray/black
set menu_color_highlight=green/black
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_AU
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
insmod png
background_image -m stretch /usr/share/grub/background.png
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Manjaro Linux' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64.img
}
submenu 'Advanced options for Manjaro Linux' $menuentry_id_option 'gnulinux-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
menuentry 'Manjaro Linux (Kernel: 3.16.7.10-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.16.7.10-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64-fallback.img
}
menuentry 'Manjaro Linux (Kernel: 3.14.40-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.14.40-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.14-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.14.40-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.14.40-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.14-x86_64-fallback.img
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-3C98-AC5D' {
savedefault
insmod part_msdos
insmod fat
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3C98-AC5D
else
search --no-floppy --fs-uuid --set=root 3C98-AC5D
fi
chainloader +1
}
menuentry 'Windows Vista (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-AEB684D3B6849D89' {
savedefault
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 AEB684D3B6849D89
else
search --no-floppy --fs-uuid --set=root AEB684D3B6849D89
fi
chainloader +1
}
menuentry 'Ubuntu 14.04.2 LTS (14.04) (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
submenu 'Advanced options for Ubuntu 14.04.2 LTS (14.04) (on /dev/sda6)' $menuentry_id_option 'osprober-gnulinux-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
menuentry 'Ubuntu (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (recovery mode) (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-52-generic
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
linux16 /boot/memtest86+/memtest.bin
}
fi
### END /etc/grub.d/60_memtest86+ ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
#
UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 / ext4 rw,relatime,data=ordered 0 1
--------------------------------------------------------------------------------
======================= sda7/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
341.706466198 = 366.904524288 boot/grub/grub.cfg 2
312.733489513 = 335.795027456 boot/initramfs-3.14-x86_64-fallback.img 2
449.202361584 = 482.327363072 boot/initramfs-3.14-x86_64.img 1
309.749114513 = 332.590579200 boot/initramfs-3.16-x86_64-fallback.img 2
449.206626415 = 482.331942400 boot/initramfs-3.16-x86_64.img 1
449.198134899 = 482.322824704 boot/vmlinuz-3.14-x86_64 1
449.194171429 = 482.318568960 boot/vmlinuz-3.16-x86_64 1
================= sda7: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
449.190421581 = 482.314542592 boot/syslinux/syslinux.cfg 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 20 cd 94 a2 85 64 17 29 9f 45 82 bb 49 22 89 8a | ....d.).E..I"..|
00000010 4a fa 48 ee 46 2d a3 dd 69 f3 e5 99 c0 b8 fa 7b |J.H.F-..i......{|
00000020 23 6b 39 48 b1 e4 1a 40 d8 47 ab ca 76 21 98 18 |#k9H...@.G..v!..|
00000030 3b 31 50 53 61 83 79 e9 0d 70 62 71 dd b9 3a 63 |;1PSa.y..pbq..:c|
00000040 3e 8a ed 0b 34 95 d0 3c 92 57 81 3f 0b 9c 05 5a |>...4..<.W.?...Z|
00000050 4a 48 12 87 fe 74 8d de 4f 17 98 9a 8e dc 88 41 |JH...t..O......A|
00000060 54 7a 30 6a de 68 b3 e6 0b 20 29 37 17 e9 e5 7c |Tz0j.h... )7...||
00000070 01 1c bc db 2c 27 e2 c6 10 0c 22 50 e6 99 9b f6 |....,'...."P....|
00000080 d0 ba c1 58 1d 98 ff dd cd 68 0e 2c 73 e7 8d dd |...X.....h.,s...|
00000090 25 df 16 47 d7 1b c2 4b ba 29 6e c4 e7 db d7 88 |%..G...K.)n.....|
000000a0 43 5f e0 60 5d a3 f7 26 99 63 2e e4 69 3a de 33 |C_.`]..&.c..i:.3|
000000b0 2c 32 52 1f cb 66 04 4c 52 f6 8b 20 5b 9f f1 8c |,2R..f.LR.. [...|
000000c0 c0 a7 ab fd 4a 24 b7 f9 a0 5d 54 55 be 5a b1 a0 |....J$...]TU.Z..|
000000d0 a0 b9 33 4a 8b 09 1a af 36 28 a2 d2 3e f1 2d e2 |..3J....6(..>.-.|
000000e0 86 17 91 9e 05 75 78 29 b6 28 9d 54 73 ab b8 1e |.....ux).(.Ts...|
000000f0 81 ae 41 95 93 54 26 80 81 f9 a7 ac e8 52 aa 88 |..A..T&......R..|
00000100 99 f3 11 6d 32 bc d0 ec 1b ca 27 dd 1c aa 47 13 |...m2.....'...G.|
00000110 28 46 2f e8 59 3d 86 c6 87 aa 11 71 99 fa 41 46 |(F/.Y=.....q..AF|
00000120 da 46 1f 8f 0d c5 5d 9f 52 85 ef 2d e4 5e 72 3b |.F....].R..-.^r;|
00000130 b9 b9 ee 5a 01 4f 7d 72 68 d5 11 3f 4a 2e 5c b2 |...Z.O}rh..?J.\.|
00000140 eb 36 3b de a6 e9 23 ba 55 3c 82 26 2a 98 b4 30 |.6;...#.U<.&*..0|
00000150 fa ff 5b 19 91 11 33 2d 5b 15 82 b6 b7 aa 42 6a |..[...3-[.....Bj|
00000160 70 10 8d d4 d1 c3 a9 af 21 26 5e 6f c3 8b 2b 7d |p.......!&^o..+}|
00000170 4a 65 a0 e8 66 44 33 72 d2 5f 6d 90 a1 8b ad 56 |Je..fD3r._m....V|
00000180 19 c7 b9 8c 63 5a 2a c8 9c f1 ea 4d 82 c4 32 5f |....cZ*....M..2_|
00000190 90 20 b1 8d ae 67 79 77 20 2f 21 fd d0 e8 22 09 |. ...gyw /!...".|
000001a0 d9 88 fc 7f d8 36 fe e8 35 ba 8d da 20 7b 2c 36 |.....6..5... {,6|
000001b0 db c7 42 75 85 f0 da 41 f2 61 8c e4 9b c9 00 fe |..Bu...A.a......|
000001c0 ff ff 07 fe ff ff 02 00 00 00 00 00 e2 04 00 fe |................|
000001d0 ff ff 05 fe ff ff 05 0c e2 04 bb 94 de 0f 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
Best Regards,
Xig
I have an ASUS laptop with several OS's installed, ie Windows with 12.04 wubi, a 14.04 and a Manjaro 8. Yesterday I ran the software update on the 14.04, which included an update of the Ubuntu base files. When I rebooted the Trusty it rewrote my grub menu.
I can still boot to the Windows and wubi 12.04 installations, but when I try to boot the Manjaro installation I get various screen messages which finish with "end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown block(0,0)".
I've searched around a bit and found that this message is typical of a missing initramfs, which doesn't apply in this case as both Manjaro kernels have an initramfs present.
I'm thinking I have a GRUB problem rather than a kernel problem, because each linux has it's own grub.cfg and it's not clear to me how they resolve priority, or how I can get them (back) into a reliable order. "It all seemed to work just fine when the Manjaro boot config was in charge." My bootinfoscript RESULTS.txt is attached: If anyone can give me some advice on how to proceed it will be very much appreciated.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 112 for .
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr /wubildr.mbr
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files: /ubuntu/winboot/wubildr /ubuntu/winboot/wubildr.mbr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sda5/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Manjaro Linux () ()
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/syslinux/syslinux.cfg
sda8: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 34,812,854 34,810,807 1c Hidden W95 FAT32 (LBA)
/dev/sda2 * 34,813,952 279,007,231 244,193,280 7 NTFS / exFAT / HPFS
/dev/sda3 279,009,278 976,768,064 697,758,787 f W95 Extended (LBA)
/dev/sda5 279,009,280 360,929,279 81,920,000 7 NTFS / exFAT / HPFS
/dev/sda6 360,932,418 627,177,661 266,245,244 83 Linux
/dev/sda7 627,177,663 963,048,554 335,870,892 83 Linux
/dev/sda8 963,048,618 976,768,064 13,719,447 82 Linux swap / Solaris
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 dc417f35-8f7a-4d06-bd52-2ac271c7db33 ext4
/dev/sda1 3C98-AC5D vfat RECOVERY
/dev/sda2 AEB684D3B6849D89 ntfs OS
/dev/sda5 3AA6870AA686C5BB ntfs DATA
/dev/sda6 7a091e3e-545a-4e43-ba7c-4da34f7507cf ext4 UBU14
/dev/sda7 0de56d23-b047-4a1b-9fd7-33f87e182578 ext4 MJOBX
/dev/sda8 68e2b1d1-3827-45fc-a039-486ba2e052d3 swap SWAP
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda5 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
======================== sda5/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en_AU
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-83-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.2.0-83-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.2.0-83-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-83-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.2.0-83-generic-pae ...'
linux /boot/vmlinuz-3.2.0-83-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-83-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-82-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.2.0-82-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.2.0-82-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-82-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 3AA6870AA686C5BB
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.2.0-82-generic-pae ...'
linux /boot/vmlinuz-3.2.0-82-generic-pae root=UUID=3AA6870AA686C5BB loop=/ubuntu/disks/root.disk ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-82-generic-pae
}
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Ubuntu, with Linux 3.13.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Ubuntu, with Linux 3.13.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-recovery-7a091e3e-545a-4e43-ba7c-4da34f7507cf (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry "Manjaro Linux' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.14.40-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry "Manjaro Linux (Kernel 3.14.40-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578 (on /dev/sda7)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
============================= sda5/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda5/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
19.671958923 = 21.122605056 boot/grub/grub.cfg 1
17.124904633 = 18.387726336 boot/initrd.img-3.2.0-82-generic-pae 3
15.781250000 = 16.944988160 boot/initrd.img-3.2.0-83-generic-pae 2
15.895320892 = 17.067470848 boot/vmlinuz-3.2.0-82-generic-pae 2
17.086730957 = 18.346737664 boot/vmlinuz-3.2.0-83-generic-pae 2
15.781250000 = 16.944988160 initrd.img 2
17.124904633 = 18.387726336 initrd.img.old 3
17.086730957 = 18.346737664 vmlinuz 2
15.895320892 = 17.067470848 vmlinuz.old 2
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_AU
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
menuentry 'Ubuntu, with Linux 3.13.0-52-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
echo 'Loading Linux 3.13.0-52-generic ...'
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-52-generic-recovery-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
echo 'Loading Linux 3.13.0-52-generic ...'
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-52-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-3C98-AC5D' {
insmod part_msdos
insmod fat
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3C98-AC5D
else
search --no-floppy --fs-uuid --set=root 3C98-AC5D
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows 7 (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-AEB684D3B6849D89' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 AEB684D3B6849D89
else
search --no-floppy --fs-uuid --set=root AEB684D3B6849D89
fi
parttool ${root} hidden-
chainloader +1
}
menuentry 'Manjaro Linux (0.8.12) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
submenu 'Advanced options for Manjaro Linux (0.8.12) (on /dev/sda7)' $menuentry_id_option 'osprober-gnulinux-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
menuentry 'Manjaro Linux (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.16.7.10-1-MANJARO x64 - fallback initramfs) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.16-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.14.40-1-MANJARO x64) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.14-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
menuentry 'Manjaro Linux (Kernel 3.14.40-1-MANJARO x64 - fallback initramfs) (on /dev/sda7)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.14-x86_64--0de56d23-b047-4a1b-9fd7-33f87e182578' {
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
initrd /boot/intel-ucode.img
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf / ext4 errors=remount-ro 0 1
# swap was on /dev/sda8 during installation
#UUID=ec1904e0-8a66-469a-9d8a-a827276a3107 none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
270.313126564 = 290.246509568 boot/grub/grub.cfg 2
200.709973335 = 215.510692864 boot/initrd.img-3.13.0-52-generic 1
200.416096687 = 215.195145216 boot/vmlinuz-3.13.0-52-generic 2
200.709973335 = 215.510692864 initrd.img 1
200.416096687 = 215.195145216 vmlinuz 2
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="${saved_entry}"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
set menu_color_normal=light-gray/black
set menu_color_highlight=green/black
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_AU
insmod gettext
fi
terminal_input console
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
insmod png
background_image -m stretch /usr/share/grub/background.png
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Manjaro Linux' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64.img
}
submenu 'Advanced options for Manjaro Linux' $menuentry_id_option 'gnulinux-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
menuentry 'Manjaro Linux (Kernel: 3.16.7.10-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.16.7.10-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.7.10-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.16.7.10-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.16-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.16-x86_64-fallback.img
}
menuentry 'Manjaro Linux (Kernel: 3.14.40-1-MANJARO x64)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-advanced-0de56d23-b047-4a1b-9fd7-33f87e182578' {
savedefault
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.14.40-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.14-x86_64.img
}
menuentry 'Manjaro Linux (Kernel: 3.14.40-1-MANJARO x64 - fallback initramfs)' --class manjaro --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.14.40-1-MANJARO x64-fallback-0de56d23-b047-4a1b-9fd7-33f87e182578' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
else
search --no-floppy --fs-uuid --set=root 0de56d23-b047-4a1b-9fd7-33f87e182578
fi
echo 'Loading Linux 3.14.40-1-MANJARO x64 ...'
linux /boot/vmlinuz-3.14-x86_64 root=UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 rw quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/intel-ucode.img /boot/initramfs-3.14-x86_64-fallback.img
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-3C98-AC5D' {
savedefault
insmod part_msdos
insmod fat
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 3C98-AC5D
else
search --no-floppy --fs-uuid --set=root 3C98-AC5D
fi
chainloader +1
}
menuentry 'Windows Vista (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-AEB684D3B6849D89' {
savedefault
insmod part_msdos
insmod ntfs
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 AEB684D3B6849D89
else
search --no-floppy --fs-uuid --set=root AEB684D3B6849D89
fi
chainloader +1
}
menuentry 'Ubuntu 14.04.2 LTS (14.04) (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
submenu 'Advanced options for Ubuntu 14.04.2 LTS (14.04) (on /dev/sda6)' $menuentry_id_option 'osprober-gnulinux-advanced-7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
menuentry 'Ubuntu (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-52-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-52-generic (recovery mode) (on /dev/sda6)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-52-generic--7a091e3e-545a-4e43-ba7c-4da34f7507cf' {
savedefault
insmod part_msdos
insmod ext2
set root='hd0,msdos6'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos6 --hint-efi=hd0,msdos6 --hint-baremetal=ahci0,msdos6 7a091e3e-545a-4e43-ba7c-4da34f7507cf
else
search --no-floppy --fs-uuid --set=root 7a091e3e-545a-4e43-ba7c-4da34f7507cf
fi
linux /boot/vmlinuz-3.13.0-52-generic root=UUID=7a091e3e-545a-4e43-ba7c-4da34f7507cf ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-52-generic
}
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0de56d23-b047-4a1b-9fd7-33f87e182578
linux16 /boot/memtest86+/memtest.bin
}
fi
### END /etc/grub.d/60_memtest86+ ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
#
UUID=0de56d23-b047-4a1b-9fd7-33f87e182578 / ext4 rw,relatime,data=ordered 0 1
--------------------------------------------------------------------------------
======================= sda7/boot/syslinux/syslinux.cfg: =======================
--------------------------------------------------------------------------------
# Config file for Syslinux -
# /boot/syslinux/syslinux.cfg
#
# Comboot modules:
# * menu.c32 - provides a text menu
# * vesamenu.c32 - provides a graphical menu
# * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
# * hdt.c32 - hardware detection tool
# * reboot.c32 - reboots the system
# * poweroff.com - shutdown the system
#
# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
# If /usr and /boot are on the same file system, symlink the files instead
# of copying them.
#
# If you do not use a menu, a 'boot:' prompt will be shown and the system
# will boot automatically after 5 seconds.
#
# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
# The wiki provides further configuration examples
DEFAULT arch
PROMPT 0 # Set to 1 if you always want to display the boot: prompt
TIMEOUT 50
# You can create syslinux keymaps with the keytab-lilo tool
#KBDMAP de.ktl
# Menu Configuration
# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux
UI menu.c32
#UI vesamenu.c32
# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
MENU TITLE Arch Linux
#MENU BACKGROUND splash.png
MENU COLOR border 30;44 #40ffffff #a0000000 std
MENU COLOR title 1;36;44 #9033ccff #a0000000 std
MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all
MENU COLOR unsel 37;44 #50ffffff #a0000000 std
MENU COLOR help 37;40 #c0ffffff #a0000000 std
MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std
MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std
MENU COLOR msg07 37;40 #90ffffff #a0000000 std
MENU COLOR tabmsg 31;40 #30ffffff #00000000 std
# boot sections follow
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux.img
LABEL archfallback
MENU LABEL Arch Linux Fallback
LINUX ../vmlinuz-linux
APPEND root=/dev/sda3 rw
INITRD ../initramfs-linux-fallback.img
#LABEL windows
# MENU LABEL Windows
# COM32 chain.c32
# APPEND hd0 1
LABEL hdt
MENU LABEL HDT (Hardware Detection Tool)
COM32 hdt.c32
LABEL reboot
MENU LABEL Reboot
COM32 reboot.c32
LABEL off
MENU LABEL Power Off
COMBOOT poweroff.com
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
341.706466198 = 366.904524288 boot/grub/grub.cfg 2
312.733489513 = 335.795027456 boot/initramfs-3.14-x86_64-fallback.img 2
449.202361584 = 482.327363072 boot/initramfs-3.14-x86_64.img 1
309.749114513 = 332.590579200 boot/initramfs-3.16-x86_64-fallback.img 2
449.206626415 = 482.331942400 boot/initramfs-3.16-x86_64.img 1
449.198134899 = 482.322824704 boot/vmlinuz-3.14-x86_64 1
449.194171429 = 482.318568960 boot/vmlinuz-3.16-x86_64 1
================= sda7: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
449.190421581 = 482.314542592 boot/syslinux/syslinux.cfg 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 20 cd 94 a2 85 64 17 29 9f 45 82 bb 49 22 89 8a | ....d.).E..I"..|
00000010 4a fa 48 ee 46 2d a3 dd 69 f3 e5 99 c0 b8 fa 7b |J.H.F-..i......{|
00000020 23 6b 39 48 b1 e4 1a 40 d8 47 ab ca 76 21 98 18 |#k9H...@.G..v!..|
00000030 3b 31 50 53 61 83 79 e9 0d 70 62 71 dd b9 3a 63 |;1PSa.y..pbq..:c|
00000040 3e 8a ed 0b 34 95 d0 3c 92 57 81 3f 0b 9c 05 5a |>...4..<.W.?...Z|
00000050 4a 48 12 87 fe 74 8d de 4f 17 98 9a 8e dc 88 41 |JH...t..O......A|
00000060 54 7a 30 6a de 68 b3 e6 0b 20 29 37 17 e9 e5 7c |Tz0j.h... )7...||
00000070 01 1c bc db 2c 27 e2 c6 10 0c 22 50 e6 99 9b f6 |....,'...."P....|
00000080 d0 ba c1 58 1d 98 ff dd cd 68 0e 2c 73 e7 8d dd |...X.....h.,s...|
00000090 25 df 16 47 d7 1b c2 4b ba 29 6e c4 e7 db d7 88 |%..G...K.)n.....|
000000a0 43 5f e0 60 5d a3 f7 26 99 63 2e e4 69 3a de 33 |C_.`]..&.c..i:.3|
000000b0 2c 32 52 1f cb 66 04 4c 52 f6 8b 20 5b 9f f1 8c |,2R..f.LR.. [...|
000000c0 c0 a7 ab fd 4a 24 b7 f9 a0 5d 54 55 be 5a b1 a0 |....J$...]TU.Z..|
000000d0 a0 b9 33 4a 8b 09 1a af 36 28 a2 d2 3e f1 2d e2 |..3J....6(..>.-.|
000000e0 86 17 91 9e 05 75 78 29 b6 28 9d 54 73 ab b8 1e |.....ux).(.Ts...|
000000f0 81 ae 41 95 93 54 26 80 81 f9 a7 ac e8 52 aa 88 |..A..T&......R..|
00000100 99 f3 11 6d 32 bc d0 ec 1b ca 27 dd 1c aa 47 13 |...m2.....'...G.|
00000110 28 46 2f e8 59 3d 86 c6 87 aa 11 71 99 fa 41 46 |(F/.Y=.....q..AF|
00000120 da 46 1f 8f 0d c5 5d 9f 52 85 ef 2d e4 5e 72 3b |.F....].R..-.^r;|
00000130 b9 b9 ee 5a 01 4f 7d 72 68 d5 11 3f 4a 2e 5c b2 |...Z.O}rh..?J.\.|
00000140 eb 36 3b de a6 e9 23 ba 55 3c 82 26 2a 98 b4 30 |.6;...#.U<.&*..0|
00000150 fa ff 5b 19 91 11 33 2d 5b 15 82 b6 b7 aa 42 6a |..[...3-[.....Bj|
00000160 70 10 8d d4 d1 c3 a9 af 21 26 5e 6f c3 8b 2b 7d |p.......!&^o..+}|
00000170 4a 65 a0 e8 66 44 33 72 d2 5f 6d 90 a1 8b ad 56 |Je..fD3r._m....V|
00000180 19 c7 b9 8c 63 5a 2a c8 9c f1 ea 4d 82 c4 32 5f |....cZ*....M..2_|
00000190 90 20 b1 8d ae 67 79 77 20 2f 21 fd d0 e8 22 09 |. ...gyw /!...".|
000001a0 d9 88 fc 7f d8 36 fe e8 35 ba 8d da 20 7b 2c 36 |.....6..5... {,6|
000001b0 db c7 42 75 85 f0 da 41 f2 61 8c e4 9b c9 00 fe |..Bu...A.a......|
000001c0 ff ff 07 fe ff ff 02 00 00 00 00 00 e2 04 00 fe |................|
000001d0 ff ff 05 fe ff ff 05 0c e2 04 bb 94 de 0f 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
Best Regards,
Xig