frankyboynl
December 24th, 2014, 07:43 PM
yes, there is actually:
-[[
Ring Meters by londonali1010 (2009)
This script draws percentage meters as rings. It is fully customisable; all options are described in the script.
IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement near the end of the script uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num > 5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num > 3; conversely if you update Conky every 0.5s, you should use update_num > 10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.
To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
lua_load ~/scripts/rings-v1.2.1.lua
lua_draw_hook_pre ring_stats
Changelog:
+ v1.2.1 -- Fixed minor bug that caused script to crash if conky_parse() returns a nil value (20.10.2009)
+ v1.2 -- Added option for the ending angle of the rings (07.10.2009)
+ v1.1 -- Added options for the starting angle of the rings, and added the "max" variable, to allow for variables that output a numerical value rather than a percentage (29.09.2009)
+ v1.0 -- Original release (28.09.2009)
arg=conky_parse("${if_up wlan0}wlan0${else}eth0${endif}"),
fg_colour=0xf0651f,
fg_colour=conky_parse("${if_up wlan0}wlan0${else}eth0${endif}"),
conky_parse("${cpu}")
name=conky_parse("${acpitemp}"),
]]
-- A TESTER
--set alarm value, this is the value at which bar color will change
--alarm_value=80
----set alarm bar color, 1,0,0,1 = red fully opaque
--ar,ag,ab,aa=1,0,0,1
-- couleurs 1
-- 1faaf0
-- f0651f
-- f01f42
-- couleurs 2 + flashy
-- 008cff
-- ff7200
-- ff000d
--normal_temp="0x1faaf0"
--warn_temp="0xf0651f"
--crit_temp="0xf01f42"
-- Un mélange des deux
normal="0x1faaf0"
warn="0xff7200"
crit="0xff000d"
-- seulement quand fond nécessaire
corner_r=35
bg_colour=0x333333
bg_alpha=0.2
settings_table = {
{
name='acpitemp',
arg='',
max=110,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=200, y=120,
radius=97,
thickness=4,
start_angle=0,
end_angle=240
},
{
name='cpu',
arg='cpu0',
max=100,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=200, y=120,
radius=86,
thickness=13,
start_angle=0,
end_angle=240
},
{
name='cpu',
arg='cpu1',
max=100,
bg_colour=0x000000,
bg_alpha=0.7,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=200, y=120,
radius=71,
thickness=12,
start_angle=0,
end_angle=240
},
{
name='cpu',
arg='cpu2',
max=100,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=200, y=120,
radius=57,
thickness=11,
start_angle=0,
end_angle=240
},
{
name='cpu',
arg='cpu3',
max=100,
bg_colour=0x000000,
bg_alpha=0.5,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=200, y=120,
radius=44,
thickness=10,
start_angle=0,
end_angle=240
},
{
name='memperc',
arg='',
max=100,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=340, y=234,
radius=60,
thickness=15,
start_angle=180,
end_angle=420
},
{
name='swapperc',
arg='',
max=100,
bg_colour=0x000000,
bg_alpha=0.4,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=340, y=234,
radius=45,
thickness=10,
start_angle=180,
end_angle=420
},
{
name='fs_used_perc',
arg='/',
max=100,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=220, y=280,
radius=40,
thickness=10,
start_angle=0,
end_angle=240
},
{
name='fs_used_perc',
arg='/home',
max=100,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=220, y=280,
radius=28,
thickness=10,
start_angle=0,
end_angle=240
},
{
name='fs_used_perc',
arg='/usr',
max=100,
bg_colour=0x000000,
bg_alpha=0.4,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=220, y=280,
radius=16,
thickness=10,
start_angle=0,
end_angle=240
},
{
name='downspeedf',
arg='',
max=2000,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=290, y=346,
radius=30,
thickness=12,
start_angle=180,
end_angle=420
},
{
name='upspeedf',
arg='',
max=200,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=290, y=346,
radius=18,
thickness=8,
start_angle=180,
end_angle=420
},
{
name='time',
arg='%S',
max=60,
bg_colour=0x000000,
bg_alpha=0.8,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=230, y=410,
radius=30,
thickness=12,
start_angle=0,
end_angle=240
},
{
name='time',
arg='%M',
max=60,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=230, y=410,
radius=18,
thickness=8,
start_angle=0,
end_angle=240
},
{
name='time',
arg='%H',
max=24,
bg_colour=0x000000,
bg_alpha=0.4,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=230, y=410,
radius=10,
thickness=4,
start_angle=0,
end_angle=240
},
{
name='battery_percent',
arg='BAT1',
max=100,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.8,
x=274, y=464,
radius=18,
thickness=10,
start_angle=180,
end_angle=420
},
{
name='',
arg='',
max=100,
bg_colour=0x000000,
bg_alpha=0.6,
fg_colour=0x1faaf0,
fg_alpha=0.6,
x=274, y=464,
radius=3,
thickness=13,
start_angle=0,
end_angle=360
},
}
require 'cairo'
function rgb_to_r_g_b(colour,alpha)
return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end
function draw_ring(cr,t,pt)
local w,h=conky_window.width,conky_window.height
local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']
local angle_0=sa*(2*math.pi/360)-math.pi/2
local angle_f=ea*(2*math.pi/360)-math.pi/2
local t_arc=t*(angle_f-angle_0)
-- Draw background ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
cairo_set_line_width(cr,ring_w)
cairo_stroke(cr)
-- Draw indicator ring
cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
cairo_stroke(cr)
end
function conky_ring_stats()
local function setup_rings(cr,pt)
local str=''
local value=0
str=string.format('${%s %s}',pt['name'],pt['arg'])
str=conky_parse(str)
value=tonumber(str)
if value == nil then value = 0 end
pct=value/pt['max']
draw_ring(cr,pct,pt)
end
if conky_window==nil then return end
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
local cr=cairo_create(cs)
local updates=conky_parse('${updates}')
update_num=tonumber(updates)
if update_num>5 then
for i in pairs(settings_table) do
display_temp=temp_watch()
setup_rings(cr,settings_table[i])
end
end
cairo_surface_destroy(cs)
cairo_destroy(cr)
end
-- Contrôle de l'espace disque
function disk_watch()
warn_disk=93
crit_disk=98
-- poser une boucle plus tard... pas simple
disk=tonumber(conky_parse("${fs_used_perc /}"))
if disk<warn_disk then
settings_table[8]['fg_colour']=normal
elseif disk<crit_disk then
settings_table[8]['fg_colour']=warn
else
settings_table[8]['fg_colour']=crit
end
disk=tonumber(conky_parse("${fs_used_perc /home}"))
if disk<warn_disk then
settings_table[9]['fg_colour']=normal
elseif disk<crit_disk then
settings_table[9]['fg_colour']=warn
else
settings_table[9]['fg_colour']=crit
end
disk=tonumber(conky_parse("${fs_used_perc /usr}"))
if disk<warn_disk then
settings_table[10]['fg_colour']=normal
elseif disk<crit_disk then
settings_table[10]['fg_colour']=warn
else
settings_table[10]['fg_colour']=crit
end
end
-- Contrôle de la température
function temp_watch()
warn_value=70
crit_value=80
temperature=tonumber(conky_parse("${acpitemp}"))
if temperature<warn_value then
settings_table[1]['fg_colour']=normal
elseif temperature<crit_value then
settings_table[1]['fg_colour']=warn
else
settings_table[1]['fg_colour']=crit
end
end
-- Contrôle de l'interface active
function iface_watch()
iface=conky_parse("${if_existing /proc/net/route eth0}eth0${else}wlan0${endif}")
settings_table[11]['arg']=iface
settings_table[12]['arg']=iface
end
function conky_draw_bg()
if conky_window==nil then return end
local w=conky_window.width
local h=conky_window.height
local cs=cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, w, h)
cr=cairo_create(cs)
cairo_move_to(cr,corner_r,0)
cairo_line_to(cr,w-corner_r,0)
cairo_curve_to(cr,w,0,w,0,w,corner_r)
cairo_line_to(cr,w,h-corner_r)
cairo_curve_to(cr,w,h,w,h,w-corner_r,h)
cairo_line_to(cr,corner_r,h)
cairo_curve_to(cr,0,h,0,h,0,h-corner_r)
cairo_line_to(cr,0,corner_r)
cairo_curve_to(cr,0,0,0,0,corner_r,0)
cairo_close_path(cr)
cairo_set_source_rgba(cr,rgb_to_r_g_b(bg_colour,bg _alpha))
cairo_fill(cr)
end
function conky_main()
temp_watch()
disk_watch()
iface_watch()
conky_ring_stats()
-- quand fond nécessaire
-- conky_draw_bg()
end
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.