View Full Version : [SOLVED] Reallocated Sector Count failure.
elianmanzueta200
September 5th, 2014, 02:47 AM
I was going to install Windows 7 on a USB so I could use some other programs, so I attempted to format the drive with DISKPART. It took about an hour to format it into NTFS, and then it failed. I tried again and it said there was no disk. So I booted into my Ubuntu 14.04 USB and tried to re-install it, but it said that on the drive was likely to fail soon so I looked at S.M.A.R.T after some searching, and it said the reallocated sector count failed. I'm pretty sure it's that failed Windows 7 install, but I've done this before with no problem, with GPart though, but it wasn't working. Anyone know any solutions? Everything I searched said to replace the drive, but I don't think I can do that..
Help?
sandyd
September 5th, 2014, 02:54 AM
I was going to install Windows 7 on a USB so I could use some other programs, so I attempted to format the drive with DISKPART. It took about an hour to format it into NTFS, and then it failed. I tried again and it said there was no disk. So I booted into my Ubuntu 14.04 USB and tried to re-install it, but it said that on the drive was likely to fail soon so I looked at S.M.A.R.T after some searching, and it said the reallocated sector count failed. I'm pretty sure it's that failed Windows 7 install, but I've done this before with no problem, with GPart though, but it wasn't working. Anyone know any solutions? Everything I searched said to replace the drive, but I don't think I can do that..
Help?
If the reallocated sector count is increasing with each boot/disk access, it is an indication of disk problems, and you probably should _not_ use that disk.
Also, how did you perform the test?
Should be something like (assuming disk is /dev/sda)
sudo apt-get install smartmontools
sudo smartctl -t long /dev/sda
elianmanzueta200
September 5th, 2014, 07:21 PM
If the reallocated sector count is increasing with each boot/disk access, it is an indication of disk problems, and you probably should _not_ use that disk.
Also, how did you perform the test?
Should be something like (assuming disk is /dev/sda)
sudo apt-get install smartmontools
sudo smartctl -t long /dev/sda
Well, I just opened up disks and it said it was likely to fail soon, so I just ran another test. I'll try again right now.
Picture: http://i.imgur.com/bQZkSC5.png, whenever I try to do a SMART test it has this error:
sk_disk_smart_self_test: Operation not supported (udisks-error-quark, 0)
EDIT:
Whenever I try to install Ubuntu 14.04, it crashes and says something about my CD/DVD player. Maybe I have to re-install Ubuntu on my USB? I'm not installing it on a DVD/CD, I am using USB.
weatherman2
September 6th, 2014, 01:29 AM
Your hard drive is clearly failing. Replace it.
elianmanzueta200
September 6th, 2014, 04:07 PM
Uhh, I just checked again and it actually is decreasing. It used to have about 19K sectors and now it has 16K sectors. I don't know if that's good or not, but at least it's not increasing, right?
EDIT:
Installer Error:
The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error: '/target/usr/src/linux-headers-3.13.0-32'
This is often due to a faulty hard disk. It may help to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.
elianmanzueta200
September 15th, 2014, 03:18 AM
Fixed by enabling LVM.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.