i have attached the bootinfoscript results if that helps...
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.4 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdb1 already mounted or sdb1 busy
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 476,426,239 476,424,192 83 Linux
/dev/sda2 476,428,286 488,396,799 11,968,514 5 Extended
/dev/sda5 476,428,288 488,396,799 11,968,512 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 3926 MB, 3926949888 bytes
64 heads, 32 sectors/track, 3745 cylinders, total 7669824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 64 1,497,087 1,497,024 17 Hidden NTFS / HPFS
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 bb520670-dcf2-4d7c-9bd3-aaed09d4928e ext4
/dev/sda5 4cb277ed-e978-495f-82da-011ddf757b77 swap
/dev/sdb1 iso9660 Ubuntu 12.04.4 LTS i386
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb /cdrom iso9660 (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.11.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=bb520670-dcf2-4d7c-9bd3-aaed09d4928e ro quiet splash nomodeset $vt_handoff
initrd /boot/initrd.img-3.11.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
echo 'Loading Linux 3.11.0-15-generic ...'
linux /boot/vmlinuz-3.11.0-15-generic root=UUID=bb520670-dcf2-4d7c-9bd3-aaed09d4928e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.11.0-15-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-59-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
linux /boot/vmlinuz-3.2.0-59-generic-pae root=UUID=bb520670-dcf2-4d7c-9bd3-aaed09d4928e ro quiet splash nomodeset $vt_handoff
initrd /boot/initrd.img-3.2.0-59-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-59-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
echo 'Loading Linux 3.2.0-59-generic-pae ...'
linux /boot/vmlinuz-3.2.0-59-generic-pae root=UUID=bb520670-dcf2-4d7c-9bd3-aaed09d4928e ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-59-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root bb520670-dcf2-4d7c-9bd3-aaed09d4928e
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=bb520670-dcf2-4d7c-9bd3-aaed09d4928e / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=4cb277ed-e978-495f-82da-011ddf757b77 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.11.0-15-generic 1
= boot/initrd.img-3.2.0-59-generic-pae 1
= boot/vmlinuz-3.11.0-15-generic 1
= boot/vmlinuz-3.2.0-59-generic-pae 1
= initrd.img 1
= vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdb1
00000000 01 43 44 30 30 31 01 00 20 20 20 20 20 20 20 20 |.CD001.. |
00000010 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | |
00000020 20 20 20 20 20 20 20 20 55 62 75 6e 74 75 20 31 | Ubuntu 1|
00000030 32 2e 30 34 2e 34 20 4c 54 53 20 69 33 38 36 20 |2.04.4 LTS i386 |
00000040 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00 00 | ........|
00000050 00 b6 05 00 00 05 b6 00 00 00 00 00 00 00 00 00 |................|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000070 00 00 00 00 00 00 00 00 01 00 00 01 01 00 00 01 |................|
00000080 00 08 08 00 6a 02 00 00 00 00 02 6a 57 00 00 00 |....j......jW...|
00000090 00 00 00 00 00 00 00 58 00 00 00 00 22 00 23 00 |.......X....".#.|
000000a0 00 00 00 00 00 23 00 08 00 00 00 00 08 00 72 02 |.....#........r.|
000000b0 04 0c 0c 25 00 02 00 00 01 00 00 01 01 00 20 20 |...%.......... |
000000c0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | |
*
000001b0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 58 4f | XO|
000001c0 52 52 49 53 4f 2d 31 2e 31 2e 38 20 32 30 31 31 |RRISO-1.1.8 2011|
000001d0 2e 31 31 2e 32 30 2e 31 37 33 30 30 31 2c 20 4c |.11.20.173001, L|
000001e0 49 42 49 53 4f 42 55 52 4e 2d 31 2e 31 2e 38 2c |IBISOBURN-1.1.8,|
000001f0 20 4c 49 42 49 53 4f 46 53 2d 31 2e 31 2e 36 2c | LIBISOFS-1.1.6,|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in