Mounting LLV encrypted disk via USB

[dargaud2]

Hello all,
I'm in the process of upgrading.
I just installed the latest Kubuntu to a new disk. I've removed the old disk and put it in an external USB enclosure. Now I'm simply trying to mount it so I can copy my files over but the partition on it is encrypted (via the previous ubuntu installer). It's /dev/sdb. I tried the following:

$ sudo cryptsetup luksOpen /dev/sdb secure
$ sudo mount /dev/mapper/secure /mnt
mount: special device /dev/mapper/secure does not exist
Could it be that there's something wrong with my external USB adapter ?

$ dmesg
[ 318.190738] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[ 318.285820] usb 2-1.2: New USB device found, idVendor=152d, idProduct=2338
[ 318.285826] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 318.285830] usb 2-1.2: Product: USB to ATA/ATAPI Bridge
[ 318.285833] usb 2-1.2: Manufacturer: JMicron
[ 318.285836] usb 2-1.2: SerialNumber: 152D203380B6
[ 318.287441] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 318.287594] scsi7 : usb-storage 2-1.2:1.0
[ 319.288516] scsi 7:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 319.288960] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 319.292286] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 319.294712] sd 7:0:0:0: [sdb] Asking for cache data failed
[ 319.294721] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 319.298324] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 319.300056] sd 7:0:0:0: [sdb] Asking for cache data failed
[ 319.300060] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 319.300063] sd 7:0:0:0: [sdb] Attached SCSI disk

[dargaud2]

OK, the Sata to USB adapter was bad. I used another one and it asked for the passwd and mounted without difficulty.