skyglow
September 12th, 2013, 04:03 AM
My videocard is an ATI 6850 latest experimental proprietary drivers are installed (13.8)
I have 2 monitor attached to it (HDMI, DVI to VGA)
My desktop manager is gnome
glxgears
20888 frames in 5.0 seconds = 4177.494 FPS
fgl_glxgears
Using GLX_SGIX_pbuffer
6826 frames in 5.0 seconds = 1365.200 FPS
i have over 1000 fps even full screen on each
When i place a window on the border of the 2 monitor it doesn't repaint as it should on the second. The right screen is repainted every 1-3 seconds.
this is my xorg.conf
Section "ServerLayout" Identifier "Dual Head Layout"
Screen 0 "myhead0" 1920 0
Screen 1 "myhead1" 0 0
EndSection
Section "Module"
# Load "dri"
# Load "dri2"
# Load "dbe"
# Load "extmod"
# Load "record"
# Load "glx"
EndSection
Section "Monitor"
Identifier "Iiyama"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1200"
Option "TargetRefresh" "60"
Option "Primary" "true"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "microstar"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "RightOf" "Iiyama"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "Radeon6850-0"
Driver "fglrx"
Option "Monitor-CRT1" "microstar"
BusID "PCI:1:0:0"
# Screen 0
EndSection
Section "Device"
Identifier "Radeon6850-1"
Driver "fglrx"
Option "Monitor-DFP5" "Iiyama"
BusID "PCI:1:0:0"
# Screen 1
EndSection
Section "Screen"
Identifier "myhead0"
Device "Radeon6850-0"
Monitor "microstar"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200"
# Virtual 3120 1200
EndSubSection
EndSection
Section "Screen"
Identifier "myhead1"
Device "Radeon6850-1"
Monitor "Iiyama"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
# Virtual 3120 1200
EndSubSection
EndSection
I forgot to mention it was working before last wipe but i can't find its xorg.conf anymore.
Thanks for your replies
PS
Screenshots capture the right image that should be seen.
I can see the mouse moving but i can't see the window while dragging it
I have 2 monitor attached to it (HDMI, DVI to VGA)
My desktop manager is gnome
glxgears
20888 frames in 5.0 seconds = 4177.494 FPS
fgl_glxgears
Using GLX_SGIX_pbuffer
6826 frames in 5.0 seconds = 1365.200 FPS
i have over 1000 fps even full screen on each
When i place a window on the border of the 2 monitor it doesn't repaint as it should on the second. The right screen is repainted every 1-3 seconds.
this is my xorg.conf
Section "ServerLayout" Identifier "Dual Head Layout"
Screen 0 "myhead0" 1920 0
Screen 1 "myhead1" 0 0
EndSection
Section "Module"
# Load "dri"
# Load "dri2"
# Load "dbe"
# Load "extmod"
# Load "record"
# Load "glx"
EndSection
Section "Monitor"
Identifier "Iiyama"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1200"
Option "TargetRefresh" "60"
Option "Primary" "true"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "microstar"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "RightOf" "Iiyama"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "Radeon6850-0"
Driver "fglrx"
Option "Monitor-CRT1" "microstar"
BusID "PCI:1:0:0"
# Screen 0
EndSection
Section "Device"
Identifier "Radeon6850-1"
Driver "fglrx"
Option "Monitor-DFP5" "Iiyama"
BusID "PCI:1:0:0"
# Screen 1
EndSection
Section "Screen"
Identifier "myhead0"
Device "Radeon6850-0"
Monitor "microstar"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1200"
# Virtual 3120 1200
EndSubSection
EndSection
Section "Screen"
Identifier "myhead1"
Device "Radeon6850-1"
Monitor "Iiyama"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
# Virtual 3120 1200
EndSubSection
EndSection
I forgot to mention it was working before last wipe but i can't find its xorg.conf anymore.
Thanks for your replies
PS
Screenshots capture the right image that should be seen.
I can see the mouse moving but i can't see the window while dragging it