GigaWare USB to Ethernet Adapter

[Adam_GUI]

Xubuntu 12.04.
XFCE 4.10.

The other day I had a major lightning strike happen.
It killed a coax line, a hub, and two onboard NICs.

For some reason, it's now rare to find a PCI ethernet card on shelf anywhere.
I did manage to find a GigaWare USB to Ethernet Adapter at my local RadioShack.
It works fine in Windows XP and 7.
It shows up as a non-writable CD-Drive device with install directories for PC and Mac.
NDISGTK shows that it's there, but nothing offers to let me actually use it.
The installer makes mention of Shenzhen Corechips Electronics Co, LTD.

lsusb outputs this:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 002 Device 002: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
Bus 001 Device 005: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 006: ID 04f9:0281 Brother Industries, Ltd
Bus 001 Device 007: ID 045e:0761 Microsoft Corp.
Bus 001 Device 008: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 009: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 010: ID 0a5c:2154 Broadcom Corp.
Bus 001 Device 011: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]


The Belkin is the adapter I'm using now to get online.
Brother is the printer, there's the keyboard, mouse, Microsoft is the webcam.
I'm guessing the Kontron is the odd ball out.
Is this just a case of no driver base?

Thanks.

[praseodym]

Right-click on the "drive" and remove it safely. Check "lsusb" again

[Adam_GUI]

Right-click on the "drive" and remove it safely. Check "lsusb" again

Done and done:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 001 Device 011: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]

[praseodym]

Can you connect now?

[Adam_GUI]

Can you connect now?

No wired connections found.

EDIT:
Unplugged the USB - > Ethernet adapter.
Output of lsusb:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 001 Device 005: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]
Bus 001 Device 007: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 008: ID 045e:0761 Microsoft Corp.
Bus 001 Device 009: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 010: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 011: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 012: ID 0a5c:2154 Broadcom Corp.


It's definitely that kontron device that's just not supported.

[praseodym]

Check:


cat /etc/network/interfaces
cat /etc/resolv.conf
route -n
ifconfig -a
Please install ethtool and show:


sudo ethtool eth0
Any difference in "lsusb"?

[Adam_GUI]

Check:


cat /etc/network/interfaces
cat /etc/resolv.conf
route -n
ifconfig -a
Please install ethtool and show:


sudo ethtool eth0
Any difference in "lsusb"?

cat /etc/network/interfaces:

auto lo
iface lo inet loopback


cat /etc/resolv.conf

# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
search hsd1.ga.comcast.net


route -n

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0


ifconfig -a

eth0 Link encap:Ethernet HWaddr 00:1c:c0:b9:1e:c3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:43 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:785 errors:0 dropped:0 overruns:0 frame:0
TX packets:785 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:67148 (67.1 KB) TX bytes:67148 (67.1 KB)

wlan0 Link encap:Ethernet HWaddr 08:86:3b:7a:75:31
inet addr:192.168.1.133 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a86:3bff:fe7a:7531/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6531 errors:0 dropped:63 overruns:0 frame:0
TX packets:5714 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5873745 (5.8 MB) TX bytes:1185226 (1.1 MB)


sudo ethtool eth0 output:

Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: no


My last good eth0 device was built into the motherboard. That thing's dead.

lsusb:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 001 Device 005: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]
Bus 002 Device 003: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
Bus 001 Device 007: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 008: ID 045e:0761 Microsoft Corp.
Bus 001 Device 009: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 010: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 011: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 012: ID 0a5c:2154 Broadcom Corp.

[praseodym]

Well, obviously the device is not shown anymore after unmounting the drive mode. Did you install the win driver with ndiswrapper? IMHO the ndiswrapper version from the repos is not patched in 12.04. Try this one:

http://ubuntuforums.org/showthread.php?t=885847&p=12592600#post12592600

and follow the links therein

[Adam_GUI]

Well, obviously the device is not shown anymore after unmounting the drive mode. Did you install the win driver with ndiswrapper? IMHO the ndiswrapper version from the repos is not patched in 12.04. Try this one:

http://ubuntuforums.org/showthread.php?t=885847&p=12592600#post12592600

and follow the links therein

I had installed the driver with ndiswrapper with no new hardware showing up in network management, even when ndiswrappergui showed new hardware.

I've uninstalled ndiswrapper 1.57 from default repositories.
I grabbed the 12.04 deb files from the PPA you ultimately led me to https://launchpad.net/ubuntu/+source/ndiswrapper here.

Installed the files: common, dkms, source, and utils (i386) with dpkg.
Grabbed gui from synaptic.

Executed ndisgtk with gksu.
Pointed the GUI to the inf file.
Screenshot!
242995

Clicking configure network takes me to the network setup dialogue.
From here, I'm stuck.

242998

[praseodym]

I do not know if ndiswrapper supports LAN connections at all. Add a cable and check


ifconfig -a
lsusb
cat /etc/network/interfaces
cat /etc/resolv.conf
dmesg | grep ndis
ndiswrapper -l

[Adam_GUI]

I do not know if ndiswrapper supports LAN connections at all. Add a cable and check


ifconfig -a
lsusb
cat /etc/network/interfaces
cat /etc/resolv.conf
dmesg | grep ndis
ndiswrapper -l

It's had an ethernet cable connected this whole time.
ifconfig -a

eth0 Link encap:Ethernet HWaddr 00:1c:c0:b9:1e:c3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:43 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2048 errors:0 dropped:0 overruns:0 frame:0
TX packets:2048 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:188197 (188.1 KB) TX bytes:188197 (188.1 KB)

wlan0 Link encap:Ethernet HWaddr 08:86:3b:7a:75:31
inet addr:192.168.1.133 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a86:3bff:fe7a:7531/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:428944 errors:0 dropped:42206 overruns:0 frame:0
TX packets:307052 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:604415798 (604.4 MB) TX bytes:32644752 (32.6 MB)


lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 001 Device 005: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]
Bus 002 Device 003: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
Bus 001 Device 014: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 015: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 016: ID 045e:0761 Microsoft Corp.
Bus 001 Device 017: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 018: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 019: ID 0a5c:2154 Broadcom Corp.


cat /etc/network/interfaces

auto lo
iface lo inet loopback


cat /etc/resolv.conf

# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
search hsd1.ga.comcast.net


dmesg | grep ndis

[ 4051.818039] ndiswrapper version 1.57 loaded (smp=yes, preempt=no)
[ 4052.087137] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 4052.087399] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 4052.087438] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 4052.092990] usbcore: registered new interface driver ndiswrapper


ndiswrapper -l

usb_ethernet_adaptor : driver installed
device (0FE6:9702) present


NDIS says it's there, but cannot load the driver.

[praseodym]

What windows driver is it? Win7? I there a XP driver available? Please check ndiswrapper version 1.58 from here:

http://ubuntuforums.org/showthread.php?t=885847&p=12592600#post12592600

1.57 is buggy

[Adam_GUI]

What windows driver is it? Win7? I there a XP driver available? Please check ndiswrapper version 1.58 from here:

http://ubuntuforums.org/showthread.php?t=885847&p=12592600#post12592600

1.57 is buggy
I'm using a driver meant for windows 2000.
I've also used the driver marked abovexp 32.
Neither driver has worked so far.

I still don't understand why you link me to a post that links to a post that links to launchpad.
If you need me to go to that same launchpad, just link me directly to it.

Did you mean for me to install 1.58 yesterday? Because you made it out that you had a patched 1.57.
Anyway, I've grabbed files for 1.58 meant for Ringtail from here: https://launchpad.net/ubuntu/+source/ndiswrapper

I've uninstalled 1.57 from synaptic.
Installed ndiswrapper-common_1.58, ndiswrapper-dkms_1.58, ndiswrapper-source_1.58, and ndiswrapper-utils-1.9_1.58.

Re-grabbed ndisgtk from synaptic.
Still no pass-through to Network Manager.

dmesg | grep ndis

[ 43.513675] ndiswrapper version 1.57 loaded (smp=yes, preempt=no)
[ 46.937271] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 46.937397] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 46.937427] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 46.946989] usbcore: registered new interface driver ndiswrapper
[ 1359.112159] usbcore: deregistering interface driver ndiswrapper
[ 1359.124407] ndiswrapper version 1.58 loaded (smp=yes, preempt=no)
[ 1359.399432] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 1359.399695] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 1359.399728] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 1359.405362] usbcore: registered new interface driver ndiswrapper

That's with the windows 2000 driver.

For Above XP 32:
Same deal.

dmesg | grep ndis

[ 43.513675] ndiswrapper version 1.57 loaded (smp=yes, preempt=no)
[ 46.937271] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 46.937397] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 46.937427] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 46.946989] usbcore: registered new interface driver ndiswrapper
[ 1359.112159] usbcore: deregistering interface driver ndiswrapper
[ 1359.124407] ndiswrapper version 1.58 loaded (smp=yes, preempt=no)
[ 1359.399432] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 1359.399695] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 1359.399728] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 1359.405362] usbcore: registered new interface driver ndiswrapper
[ 1560.596164] usbcore: deregistering interface driver ndiswrapper
[ 1560.609513] ndiswrapper version 1.58 loaded (smp=yes, preempt=no)
[ 1560.883247] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 1560.883511] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 1560.883544] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 1560.888734] usbcore: registered new interface driver ndiswrapper

I have found some info about the card, though.
Bus 002 Device 002: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
This sucker gets used in a ton of cheaper devices.
It's supposed to be using module dm9601.

dmesg | grep -i usb dump:

[ 0.172138] usbcore: registered new interface driver usbfs
[ 0.172138] usbcore: registered new interface driver hub
[ 0.172138] usbcore: registered new device driver usb
[ 0.702088] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.702162] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.720020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.720200] hub 1-0:1.0: USB hub found
[ 0.720281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720294] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.720360] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.720503] hub 2-0:1.0: USB hub found
[ 0.720622] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.720763] hub 3-0:1.0: USB hub found
[ 0.720883] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.721032] hub 4-0:1.0: USB hub found
[ 0.721148] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.721297] hub 5-0:1.0: USB hub found
[ 0.721403] usbcore: registered new interface driver libusual
[ 1.144031] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.276789] hub 1-4:1.0: USB hub found
[ 1.388025] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1.613749] Initializing USB Mass Storage driver...
[ 1.613836] scsi4 : usb-storage 1-5:1.0
[ 1.613902] usbcore: registered new interface driver usb-storage
[ 1.613904] USB Mass Storage support registered.
[ 1.724028] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[ 2.096021] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.259570] scsi5 : usb-storage 2-1:1.0
[ 2.348150] usb 1-4.1: new full-speed USB device number 6 using ehci_hcd
[ 2.457955] hub 1-4.1:1.0: USB hub found
[ 2.544149] usb 1-4.4: new high-speed USB device number 7 using ehci_hcd
[ 2.816152] usb 1-4.1.1: new full-speed USB device number 8 using ehci_hcd
[ 2.980151] usb 1-4.1.2: new full-speed USB device number 9 using ehci_hcd
[ 3.144152] usb 1-4.1.3: new full-speed USB device number 10 using ehci_hcd
[ 43.094251] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam VX-2000 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input4
[ 43.094320] usbcore: registered new interface driver uvcvideo
[ 43.094322] USB Video Class driver (1.1.1)
[ 43.147756] usbcore: registered new interface driver snd-usb-audio
[ 43.344862] r8712u: USB_SPEED_HIGH with 4 endpoints
[ 43.445494] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 43.449738] usbcore: registered new interface driver btusb
[ 43.467957] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input8
[ 43.470691] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.7-4.1.1/input0
[ 43.478063] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.0/input/input9
[ 43.478700] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.7-4.1.2/input0
[ 43.478901] usbcore: registered new interface driver usbhid
[ 43.478904] usbhid: USB HID core driver
[ 43.482276] usb 1-4.1.1: input irq status -75 received
[ 44.912519] usbcore: registered new interface driver r8712u
[ 46.692057] usb 2-1: reset full-speed USB device number 2 using uhci_hcd
[ 46.937397] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 46.937427] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 46.946989] usbcore: registered new interface driver ndiswrapper
[ 195.689543] usbcore: registered new interface driver dm9601
[ 1141.218880] usb 1-4: USB disconnect, device number 3
[ 1141.218886] usb 1-4.1: USB disconnect, device number 6
[ 1141.218890] usb 1-4.1.1: USB disconnect, device number 8
[ 1141.222817] usb 1-4: clear tt 1 (90a2) error -19
[ 1141.226481] usb 1-4: clear tt 1 (90a2) error -19
[ 1141.276173] usb 1-4.1.2: USB disconnect, device number 9
[ 1141.320399] usb 1-4.1.3: USB disconnect, device number 10
[ 1141.574268] usb 1-4.4: USB disconnect, device number 7
[ 1141.860029] usb 1-4: new high-speed USB device number 11 using ehci_hcd
[ 1141.992912] hub 1-4:1.0: USB hub found
[ 1142.280090] usb 1-4.1: new full-speed USB device number 12 using ehci_hcd
[ 1142.389898] hub 1-4.1:1.0: USB hub found
[ 1142.476210] usb 1-4.4: new high-speed USB device number 13 using ehci_hcd
[ 1142.681261] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam VX-2000 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input13
[ 1142.764195] usb 1-4.1.1: new full-speed USB device number 14 using ehci_hcd
[ 1142.863336] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input14
[ 1142.863533] generic-usb 0003:0A5C:4502.0003: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.7-4.1.1/input0
[ 1142.932199] usb 1-4.1.2: new full-speed USB device number 15 using ehci_hcd
[ 1143.030342] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.0/input/input15
[ 1143.030587] generic-usb 0003:0A5C:4503.0004: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.7-4.1.2/input0
[ 1143.100188] usb 1-4.1.3: new full-speed USB device number 16 using ehci_hcd
[ 1143.218554] usb 1-4.1.1: input irq status -75 received
[ 1359.112159] usbcore: deregistering interface driver ndiswrapper
[ 1359.248065] usb 2-1: reset full-speed USB device number 2 using uhci_hcd
[ 1359.399695] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 1359.399728] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 1359.405362] usbcore: registered new interface driver ndiswrapper
[ 1560.596164] usbcore: deregistering interface driver ndiswrapper
[ 1560.732055] usb 2-1: reset full-speed USB device number 2 using uhci_hcd
[ 1560.883511] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 1560.883544] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 1560.888734] usbcore: registered new interface driver ndiswrapper


Copy paste of an important one:

[ 195.689543] usbcore: registered new interface driver dm9601
It's loading a driver. But, the system never offers to recognize it as a network device.

ADDITIONAL:
modinfo dm9601

filename: /lib/modules/3.2.0-43-generic-pae/kernel/drivers/net/usb/dm9601.ko
license: GPL
description: Davicom DM9601 USB 1.1 ethernet devices
author: Peter Korsgaard <jacmet@sunsite.dk>
srcversion: 8EBB87E816B3F0047104F5F
alias: usb:v0A46p9000d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0FE6p9700d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0FE6p8101d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A47p9601d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p8515d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p0268d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p6688d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p9601d*dc*dsc*dp*ic*isc*ip*
alias: usb:v07AAp9601d*dc*dsc*dp*ic*isc*ip*
depends: usbnet
intree: Y
vermagic: 3.2.0-43-generic-pae SMP mod_unload modversions 686

Depends usbnet.

ls /lib/modules/`uname -r`/kernel/drivers/net/usb/

asix.ko cdc-phonet.ko hso.ko lg-vl600.ko rndis_host.ko usbnet.ko
catc.ko cdc_subset.ko int51x1.ko mcs7830.ko rtl8150.ko zaurus.ko
cdc_eem.ko cx82310_eth.ko ipheth.ko net1080.ko sierra_net.ko
cdc_ether.ko dm9601.ko kalmia.ko pegasus.ko smsc75xx.ko
cdc_ncm.ko gl620a.ko kaweth.ko plusb.ko smsc95xx.ko

[praseodym]

As you can see from the modinfo output your device ID is not included. Try to add it "on-the-fly":


echo 'install dm9601 modprobe --ignore-install dm9601 ; /bin/echo "0fe6 9702" > /sys/bus/usb/drivers/dm9601/new_id' | sudo tee /etc/modprobe.d/dm9601.conf
sudo modprobe -rfv ndiswrapper
sudo modprobe -v dm9601
Check:


lsusb
lsmod
dmesg | grep dm9

[Adam_GUI]

As you can see from the modinfo output your device ID is not included. Try to add it "on-the-fly":


echo 'install dm9601 modprobe --ignore-install dm9601 ; /bin/echo "0fe6 9702" > /sys/bus/usb/drivers/dm9601/new_id' | sudo tee /etc/modprobe.d/dm9601.conf
sudo modprobe -rfv ndiswrapper
sudo modprobe -v dm9601
Check:


lsusb
lsmod
dmesg | grep dm9

echo 'install dm9601 modprobe --ignore-install dm9601 ; /bin/echo "0fe6 9702" > /sys/bus/usb/drivers/dm9601/new_id' | sudo tee /etc/modprobe.d/dm9601.conf


echo 'install dm9601 modprobe --ignore-install dm9601 ; /bin/echo "0fe6 9702" > /sys/bus/usb/drivers/dm9601/new_id' | sudo tee /etc/modprobe.d/dm9601.conf
install dm9601 modprobe --ignore-install dm9601 ; /bin/echo "0fe6 9702" > /sys/bus/usb/drivers/dm9601/new_id


sudo modprobe -rfv ndiswrapper

rmmod /lib/modules/3.2.0-43-generic-pae/updates/dkms/ndiswrapper.ko


sudo modprobe -v dm9601
All Clear.

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 019: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 004: ID 0bda:0103 Realtek Semiconductor Corp. USB 2.0 Card Reader
Bus 001 Device 017: ID 050d:945a Belkin Components F7D1101 Basic Wireless USB Adapter v1000 [Realtek RTL8188SU]
Bus 002 Device 003: ID 0fe6:9702 Kontron (Industrial Computer Source / ICS Advent)
Bus 001 Device 020: ID 045e:0761 Microsoft Corp.
Bus 001 Device 021: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 022: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 001 Device 023: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 024: ID 0a5c:2154 Broadcom Corp.


lsmod

Module Size Used by
nls_utf8 12493 1
isofs 39553 1
dm9601 13331 0
usbnet 25214 1 dm9601
webcamstudio 19149 0
snd_hrtimer 12648 1
vesafb 13516 1
pci_stub 12550 1
vboxpci 22911 0
vboxnetadp 13328 0
vboxnetflt 27240 0
vboxdrv 252228 3 vboxpci,vboxnetadp,vboxnetflt
s5h1409 18386 1
cx88_dvb 33347 1
cx88_vp3054_i2c 12840 1 cx88_dvb
videobuf_dvb 13867 1 cx88_dvb
dvb_core 94814 2 cx88_dvb,videobuf_dvb
rc_pinnacle_pctv_hd 12481 0
btusb 17948 2
usbhid 41937 0
hid 77428 1 usbhid
xc5000 18287 2
r8712u 163880 0
nvidia 10286823 51
tuner 26836 1
snd_hda_codec_realtek 174313 1
snd_hda_intel 32719 4
snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel
uvcvideo 67203 0
psmouse 86520 0
snd_usb_audio 101566 2
snd_hwdep 13276 2 snd_hda_codec,snd_usb_audio
snd_usbmidi_lib 24588 1 snd_usb_audio
ir_lirc_codec 12739 0
lirc_dev 18700 1 ir_lirc_codec
ir_mce_kbd_decoder 12681 0
ir_sony_decoder 12462 0
snd_seq_midi 13132 0
serio_raw 13027 0
cx88_alsa 18089 2
cx8800 33328 0
ir_jvc_decoder 12459 0
snd_rawmidi 25424 2 snd_usbmidi_lib,snd_seq_midi
ir_rc6_decoder 12459 0
snd_pcm 80916 4 snd_hda_intel,snd_hda_codec,snd_usb_audio,cx88_als a
ir_rc5_decoder 12459 0
cx8802 18608 1 cx88_dvb
ir_nec_decoder 12459 0
snd_seq_midi_event 14475 1 snd_seq_midi
cx88xx 83089 4 cx88_dvb,cx88_alsa,cx8800,cx8802
rc_core 21263 10 rc_pinnacle_pctv_hd,ir_lirc_codec,ir_mce_kbd_decod er,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,i r_rc5_decoder,ir_nec_decoder,cx88xx
snd_seq 51592 3 snd_seq_midi,snd_seq_midi_event
i2c_algo_bit 13199 2 cx88_vp3054_i2c,cx88xx
tveeprom 17009 1 cx88xx
v4l2_common 15793 3 tuner,cx8800,cx88xx
videodev 86588 6 webcamstudio,tuner,uvcvideo,cx8800,cx88xx,v4l2_com mon
videobuf_dma_sg 18786 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
btcx_risc 13400 4 cx88_alsa,cx8800,cx8802,cx88xx
videobuf_core 25409 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
snd_timer 28931 3 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
video 19115 0
mac_hid 13077 0
snd 62218 30 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_usb_audio,snd_hwdep,snd_usbmidi_lib,cx88_alsa, snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_devi ce
soundcore 14635 1 snd
snd_page_alloc 14108 2 snd_hda_intel,snd_pcm
parport_pc 32114 0
ppdev 12849 0
bnep 17830 2
rfcomm 38139 16
bluetooth 158479 23 btusb,bnep,rfcomm
binfmt_misc 17292 1
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
usb_storage 39646 1
ext2 67987 1
floppy 60184 0
r8169 56368 0


dmesg | grep dm9

[ 195.689543] usbcore: registered new interface driver dm9601


modinfo dm9601

filename: /lib/modules/3.2.0-43-generic-pae/kernel/drivers/net/usb/dm9601.ko
license: GPL
description: Davicom DM9601 USB 1.1 ethernet devices
author: Peter Korsgaard <jacmet@sunsite.dk>
srcversion: 8EBB87E816B3F0047104F5F
alias: usb:v0A46p9000d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0FE6p9700d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0FE6p8101d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A47p9601d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p8515d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p0268d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p6688d*dc*dsc*dp*ic*isc*ip*
alias: usb:v0A46p9601d*dc*dsc*dp*ic*isc*ip*
alias: usb:v07AAp9601d*dc*dsc*dp*ic*isc*ip*
depends: usbnet
intree: Y
vermagic: 3.2.0-43-generic-pae SMP mod_unload modversions 686

[praseodym]

Load the driver per default on boot-up


echo dm9601 | sudo tee -a /etc/modules
Remove the wired profiles in the NM applet, and reboot without wireless stick.

[Adam_GUI]

Load the driver per default on boot-up


echo dm9601 | sudo tee -a /etc/modules
Remove the wired profiles in the NM applet, and reboot without wireless stick.

No dice.
No wired connection found on boot.

[praseodym]

Any error messages in dmesg?

[Adam_GUI]

Any error messages in dmesg?

Full dmesg dump inbound.
Huge.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-43-generic-pae (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #68-Ubuntu SMP Wed May 15 03:55:10 UTC 2013 (Ubuntu 3.2.0-43.68-generic-pae 3.2.42)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfb4a000 (usable)
[ 0.000000] BIOS-e820: 00000000cfb4a000 - 00000000cfb8d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfb8d000 - 00000000cfce1000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfce1000 - 00000000cfce7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfce7000 - 00000000cfce8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfce8000 - 00000000cfcea000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfcea000 - 00000000cfcec000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfcec000 - 00000000cfced000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfced000 - 00000000cfcf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfd00000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: /DG31PR, BIOS PRG3110H.86A.0052.2008.0612.1910 06/12/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 4608MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 4095M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00fd420] fd420
[ 0.000000] initial memory mapped : 0 - 02000000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffa000-2000000
[ 0.000000] RAMDISK: 365a6000 - 372cb000
[ 0.000000] ACPI: RSDP 000f03c0 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT cfce8f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP cfce6d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCFCEBF40/0x00000000CFCE7F40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT cfce1010 04A8F (v01 INTEL DG31PR 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS cfcebf40 00040
[ 0.000000] ACPI: APIC cfce6f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
[ 0.000000] ACPI: HPET cfcefd10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
[ 0.000000] ACPI: MCFG cfcefc10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3972MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfb4a
[ 0.000000] 0: 0x000cfd00 -> 0x000cff00
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047769
[ 0.000000] free_area_init_node: node 0, pgdat c186d8c0, node_mem_map f3fa6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7945 pages used for memmap
[ 0.000000] HighMem zone: 811587 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ee1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34240 r0 d23104 u57344
[ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038040
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-43-generic-pae root=UUID=7c47ff4f-1e7f-4a50-ac17-968dd037e20f ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 19922688 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00130000)
[ 0.000000] Memory: 4107756k/4980736k available (5830k kernel code, 83320k reserved, 2853k data, 744k init, 3278128k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc187c000 - 0xc1936000 ( 744 kB)
[ 0.000000] .data : 0xc15b1abc - 0xc187b100 (2853 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15b1abc (5830 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2500.076 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.15 BogoMIPS (lpj=10000304)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004027] Security Framework initialized
[ 0.004043] AppArmor: AppArmor initialized
[ 0.004044] Yama: becoming mindful.
[ 0.004096] Mount-cache hash table entries: 512
[ 0.004221] Initializing cgroup subsys cpuacct
[ 0.004226] Initializing cgroup subsys memory
[ 0.004233] Initializing cgroup subsys devices
[ 0.004235] Initializing cgroup subsys freezer
[ 0.004237] Initializing cgroup subsys blkio
[ 0.004242] Initializing cgroup subsys perf_event
[ 0.004267] CPU: Physical Processor ID: 0
[ 0.004268] CPU: Processor Core ID: 0
[ 0.004271] mce: CPU supports 6 MCE banks
[ 0.004279] CPU0: Thermal monitoring enabled (TM2)
[ 0.004282] using mwait in idle threads.
[ 0.009843] ACPI: Core revision 20110623
[ 0.012234] ftrace: allocating 26115 entries in 52 pages
[ 0.016047] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058369] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f7512000 soft=f7514000
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.148034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148069] Brought up 2 CPUs
[ 0.148071] Total of 2 processors activated (9999.99 BogoMIPS).
[ 0.149459] devtmpfs: initialized
[ 0.149459] EVM: security.selinux
[ 0.149459] EVM: security.SMACK64
[ 0.149459] EVM: security.capability
[ 0.149459] PM: Registering ACPI NVS region at cfb4a000 (274432 bytes)
[ 0.149459] PM: Registering ACPI NVS region at cfce7000 (4096 bytes)
[ 0.149459] PM: Registering ACPI NVS region at cfcea000 (8192 bytes)
[ 0.149459] PM: Registering ACPI NVS region at cfced000 (16384 bytes)
[ 0.149459] print_constraints: dummy:
[ 0.149459] RTC time: 13:26:11, date: 05/25/13
[ 0.149459] NET: Registered protocol family 16
[ 0.149459] Trying to unpack rootfs image as initramfs...
[ 0.149459] EISA bus registered
[ 0.149459] ACPI: bus type pci registered
[ 0.149459] PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
[ 0.149459] PCI: not using MMCONFIG
[ 0.149459] PCI: Using configuration type 1 for base access
[ 0.152283] bio: create slab <bio-0> at 0
[ 0.152363] ACPI: Added _OSI(Module Device)
[ 0.152365] ACPI: Added _OSI(Processor Device)
[ 0.152367] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152369] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153327] ACPI: EC: Look up EC in DSDT
[ 0.154323] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.155975] ACPI: SSDT cfcebc10 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.156296] ACPI: Dynamic OEM Table Load:
[ 0.156299] ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
[ 0.156459] ACPI: Interpreter enabled
[ 0.156468] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.156489] ACPI: Using IOAPIC for interrupt routing
[ 0.156510] PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
[ 0.156988] PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
[ 0.156991] PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
[ 0.156993] PCI: Using MMCONFIG for extended config space
[ 0.157330] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161956] ACPI: No dock devices found.
[ 0.161959] HEST: Table not found.
[ 0.161963] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162103] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162207] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.162210] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.162212] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.162215] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xff1b9fff]
[ 0.162228] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.162275] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.162317] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.162320] pci 0000:00:01.0: PME# disabled
[ 0.162363] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.162378] pci 0000:00:1b.0: reg 10: [mem 0xf5100000-0xf5103fff 64bit]
[ 0.162445] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.162449] pci 0000:00:1b.0: PME# disabled
[ 0.162470] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.162538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.162541] pci 0000:00:1c.0: PME# disabled
[ 0.162562] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.162630] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.162634] pci 0000:00:1c.1: PME# disabled
[ 0.162656] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.162695] pci 0000:00:1d.0: reg 20: [io 0xd080-0xd09f]
[ 0.162725] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.162766] pci 0000:00:1d.1: reg 20: [io 0xd060-0xd07f]
[ 0.162796] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.162834] pci 0000:00:1d.2: reg 20: [io 0xd040-0xd05f]
[ 0.162864] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.162902] pci 0000:00:1d.3: reg 20: [io 0xd020-0xd03f]
[ 0.162940] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.162960] pci 0000:00:1d.7: reg 10: [mem 0xf5104000-0xf51043ff]
[ 0.163040] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.163045] pci 0000:00:1d.7: PME# disabled
[ 0.163061] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.163121] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[ 0.163202] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
[ 0.163245] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.163258] pci 0000:00:1f.1: reg 10: [io 0xd130-0xd137]
[ 0.163267] pci 0000:00:1f.1: reg 14: [io 0xd120-0xd123]
[ 0.163276] pci 0000:00:1f.1: reg 18: [io 0xd110-0xd117]
[ 0.163286] pci 0000:00:1f.1: reg 1c: [io 0xd100-0xd103]
[ 0.163295] pci 0000:00:1f.1: reg 20: [io 0xd0f0-0xd0ff]
[ 0.163328] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.163342] pci 0000:00:1f.2: reg 10: [io 0xd0e0-0xd0e7]
[ 0.163349] pci 0000:00:1f.2: reg 14: [io 0xd0d0-0xd0d3]
[ 0.163358] pci 0000:00:1f.2: reg 18: [io 0xd0c0-0xd0c7]
[ 0.163365] pci 0000:00:1f.2: reg 1c: [io 0xd0b0-0xd0b3]
[ 0.163373] pci 0000:00:1f.2: reg 20: [io 0xd0a0-0xd0af]
[ 0.163407] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.163411] pci 0000:00:1f.2: PME# disabled
[ 0.163425] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.163475] pci 0000:00:1f.3: reg 20: [io 0xd000-0xd01f]
[ 0.163545] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
[ 0.163557] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf4ffffff]
[ 0.163569] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.163580] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit]
[ 0.163588] pci 0000:01:00.0: reg 24: [io 0xc000-0xc07f]
[ 0.163596] pci 0000:01:00.0: reg 30: [mem 0xf5000000-0xf501ffff pref]
[ 0.163651] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.163654] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.163657] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf50fffff]
[ 0.163662] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.163700] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.163768] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.163787] pci 0000:03:00.0: reg 10: [io 0xb000-0xb0ff]
[ 0.163820] pci 0000:03:00.0: reg 18: [mem 0xf9020000-0xf9020fff 64bit]
[ 0.163856] pci 0000:03:00.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
[ 0.163937] pci 0000:03:00.0: supports D1 D2
[ 0.163939] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.163944] pci 0000:03:00.0: PME# disabled
[ 0.163967] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.163977] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.163981] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.163985] pci 0000:00:1c.1: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.164039] pci 0000:04:06.0: [14f1:8800] type 0 class 0x000400
[ 0.164058] pci 0000:04:06.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.164157] pci 0000:04:06.1: [14f1:8801] type 0 class 0x000480
[ 0.164173] pci 0000:04:06.1: reg 10: [mem 0xf7000000-0xf7ffffff]
[ 0.164258] pci 0000:04:06.2: [14f1:8802] type 0 class 0x000480
[ 0.164274] pci 0000:04:06.2: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.164386] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.164392] pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xf8ffffff]
[ 0.164398] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.164400] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.164402] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.164405] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xff1b9fff] (subtractive decode)
[ 0.164424] pci_bus 0000:00: on NUMA node 0
[ 0.164427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.164536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.164617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.164653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.164768] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.164911] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.168473] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.168520] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.168564] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.168607] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.168651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.168740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.168784] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.168904] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.168909] vgaarb: loaded
[ 0.168910] vgaarb: bridge control possible 0000:01:00.0
[ 0.169027] i2c-core: driver [aat2870] using legacy suspend method
[ 0.169028] i2c-core: driver [aat2870] using legacy resume method
[ 0.169112] SCSI subsystem initialized
[ 0.176066] libata version 3.00 loaded.
[ 0.176066] usbcore: registered new interface driver usbfs
[ 0.176070] usbcore: registered new interface driver hub
[ 0.176101] usbcore: registered new device driver usb
[ 0.176193] PCI: Using ACPI for IRQ routing
[ 0.176836] PCI: pci_cache_line_size set to 64 bytes
[ 0.176911] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.176913] reserve RAM buffer: 00000000cfb4a000 - 00000000cfffffff
[ 0.176916] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff
[ 0.177023] NetLabel: Initializing
[ 0.177025] NetLabel: domain hash size = 128
[ 0.177027] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.177037] NetLabel: unlabeled traffic allowed by default
[ 0.177087] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.177092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.177097] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.184068] Switching to clocksource hpet
[ 0.192070] AppArmor: AppArmor Filesystem Enabled
[ 0.192103] pnp: PnP ACPI init
[ 0.192121] ACPI: bus type pnp registered
[ 0.192205] pnp 00:00: [bus 00-ff]
[ 0.192208] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.192210] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.192213] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.192215] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.192217] pnp 00:00: [mem 0x00000000 window]
[ 0.192220] pnp 00:00: [mem 0xd0000000-0xff1b9fff window]
[ 0.192276] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.192307] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.192309] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.192362] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.192365] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.192368] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.192491] pnp 00:02: [io 0x0400-0x047f]
[ 0.192493] pnp 00:02: [io 0x1180-0x119f]
[ 0.192495] pnp 00:02: [io 0x0500-0x053f]
[ 0.192497] pnp 00:02: [mem 0xfec00000-0xfecfffff]
[ 0.192499] pnp 00:02: [mem 0xfee00000-0xfee0ffff]
[ 0.192501] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.192503] pnp 00:02: [mem 0xffb00000-0xffcfffff]
[ 0.192505] pnp 00:02: [mem 0xfc800000-0xfc800fff]
[ 0.192507] pnp 00:02: [mem 0xfed20000-0xfed7ffff]
[ 0.192509] pnp 00:02: [mem 0xffe00000-0xffffffff]
[ 0.192560] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.192562] system 00:02: [io 0x1180-0x119f] has been reserved
[ 0.192565] system 00:02: [io 0x0500-0x053f] has been reserved
[ 0.192568] system 00:02: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.192571] system 00:02: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.192573] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.192576] system 00:02: [mem 0xffb00000-0xffcfffff] could not be reserved
[ 0.192579] system 00:02: [mem 0xfc800000-0xfc800fff] has been reserved
[ 0.192581] system 00:02: [mem 0xfed20000-0xfed7ffff] has been reserved
[ 0.192584] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.192587] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.192686] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.192688] pnp 00:03: [io 0x0290-0x029f]
[ 0.192690] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.192736] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.192739] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192766] pnp 00:04: [io 0x0060]
[ 0.192768] pnp 00:04: [io 0x0064]
[ 0.192779] pnp 00:04: [irq 1]
[ 0.192812] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.192852] pnp 00:05: [irq 12]
[ 0.192887] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.193156] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.193159] pnp 00:06: [io 0x03f7]
[ 0.193164] pnp 00:06: [irq 6]
[ 0.193166] pnp 00:06: [dma 2]
[ 0.193218] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.193448] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.193454] pnp 00:07: [irq 4]
[ 0.193456] pnp 00:07: [dma 0 disabled]
[ 0.193521] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.193535] pnp 00:08: [dma 4]
[ 0.193537] pnp 00:08: [io 0x0000-0x000f]
[ 0.193539] pnp 00:08: [io 0x0081-0x0083]
[ 0.193540] pnp 00:08: [io 0x0087]
[ 0.193542] pnp 00:08: [io 0x0089-0x008b]
[ 0.193544] pnp 00:08: [io 0x008f]
[ 0.193546] pnp 00:08: [io 0x00c0-0x00df]
[ 0.193575] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193585] pnp 00:09: [io 0x0070-0x0071]
[ 0.193590] pnp 00:09: [irq 8]
[ 0.193620] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193629] pnp 00:0a: [io 0x0061]
[ 0.193657] pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193672] pnp 00:0b: [io 0x0010-0x001f]
[ 0.193674] pnp 00:0b: [io 0x0022-0x003f]
[ 0.193676] pnp 00:0b: [io 0x0044-0x005f]
[ 0.193678] pnp 00:0b: [io 0x0062-0x0063]
[ 0.193680] pnp 00:0b: [io 0x0065-0x006f]
[ 0.193682] pnp 00:0b: [io 0x0072-0x007f]
[ 0.193684] pnp 00:0b: [io 0x0080]
[ 0.193685] pnp 00:0b: [io 0x0084-0x0086]
[ 0.193687] pnp 00:0b: [io 0x0088]
[ 0.193689] pnp 00:0b: [io 0x008c-0x008e]
[ 0.193691] pnp 00:0b: [io 0x0090-0x009f]
[ 0.193693] pnp 00:0b: [io 0x00a2-0x00bf]
[ 0.193695] pnp 00:0b: [io 0x00e0-0x00ef]
[ 0.193696] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.193749] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.193752] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.193761] pnp 00:0c: [io 0x00f0-0x00ff]
[ 0.193766] pnp 00:0c: [irq 13]
[ 0.193796] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193869] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.193909] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.194036] pnp: PnP ACPI: found 14 devices
[ 0.194038] ACPI: ACPI bus type pnp unregistered
[ 0.194041] PnPBIOS: Disabled by ACPI PNP
[ 0.230351] PCI: max bus depth: 1 pci_try_num: 2
[ 0.230391] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe4000000-0xe41fffff 64bit pref]
[ 0.230394] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe4200000-0xe43fffff]
[ 0.230397] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe4400000-0xe45fffff 64bit pref]
[ 0.230401] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.230404] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.230407] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.230411] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf50fffff]
[ 0.230414] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.230419] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.230422] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.230427] pci 0000:00:1c.0: bridge window [mem 0xe4200000-0xe43fffff]
[ 0.230430] pci 0000:00:1c.0: bridge window [mem 0xe4400000-0xe45fffff 64bit pref]
[ 0.230437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.230440] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.230444] pci 0000:00:1c.1: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.230448] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe41fffff 64bit pref]
[ 0.230454] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.230459] pci 0000:00:1e.0: bridge window [mem 0xf6000000-0xf8ffffff]
[ 0.230486] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.230490] pci 0000:00:01.0: setting latency timer to 64
[ 0.230496] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.230500] pci 0000:00:1c.0: setting latency timer to 64
[ 0.230509] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.230513] pci 0000:00:1c.1: setting latency timer to 64
[ 0.230519] pci 0000:00:1e.0: setting latency timer to 64
[ 0.230523] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.230525] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.230527] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230529] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xff1b9fff]
[ 0.230532] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.230534] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf50fffff]
[ 0.230536] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.230538] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.230540] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe43fffff]
[ 0.230543] pci_bus 0000:02: resource 2 [mem 0xe4400000-0xe45fffff 64bit pref]
[ 0.230545] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.230547] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff]
[ 0.230550] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe41fffff 64bit pref]
[ 0.230552] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf8ffffff]
[ 0.230554] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.230556] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.230558] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.230561] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xff1b9fff]
[ 0.230603] NET: Registered protocol family 2
[ 0.230678] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.230911] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.231344] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.231563] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.231565] TCP reno registered
[ 0.231568] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.231578] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.231660] NET: Registered protocol family 1
[ 0.231701] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.231718] pci 0000:00:1d.0: PCI INT A disabled
[ 0.231728] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.231743] pci 0000:00:1d.1: PCI INT B disabled
[ 0.231754] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.231769] pci 0000:00:1d.2: PCI INT C disabled
[ 0.231776] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.231791] pci 0000:00:1d.3: PCI INT D disabled
[ 0.231799] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.231934] pci 0000:00:1d.7: PCI INT A disabled
[ 0.231958] pci 0000:01:00.0: Boot video device
[ 0.231969] PCI: CLS 64 bytes, default 64
[ 0.232328] audit: initializing netlink socket (disabled)
[ 0.232338] type=2000 audit(1369488371.228:1): initialized
[ 0.251832] highmem bounce pool size: 64 pages
[ 0.251838] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.254132] VFS: Disk quotas dquot_6.5.2
[ 0.254192] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.254717] fuse init (API version 7.17)
[ 0.254806] msgmni has been set to 1620
[ 0.255105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.255129] io scheduler noop registered
[ 0.255131] io scheduler deadline registered
[ 0.255137] io scheduler cfq registered (default)
[ 0.255248] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.255282] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.255347] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.255382] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.255474] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.255511] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.255621] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.255624] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.255627] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.255644] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.255648] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.255665] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.255667] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.255670] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.255690] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.255725] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
[ 0.255748] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.255759] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
[ 0.255778] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.255785] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.255852] intel_idle: MWAIT substates: 0x22220
[ 0.255854] intel_idle: does not run on family 6 model 23
[ 0.255936] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.255942] ACPI: Sleep Button [SLPB]
[ 0.255983] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.255987] ACPI: Power Button [PWRB]
[ 0.256052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.256055] ACPI: Power Button [PWRF]
[ 0.257225] ERST: Table is not found!
[ 0.257227] GHES: HEST is not enabled!
[ 0.257300] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.277656] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.277984] isapnp: Scanning for PnP cards...
[ 0.419292] Freeing initrd memory: 13460k freed
[ 0.631633] isapnp: No Plug & Play device found
[ 0.700521] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.700878] Linux agpgart interface v0.103
[ 0.702529] brd: module loaded
[ 0.703315] loop: module loaded
[ 0.703483] ata_piix 0000:00:1f.1: version 2.13
[ 0.703496] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.703534] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.703836] scsi0 : ata_piix
[ 0.703913] scsi1 : ata_piix
[ 0.704907] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0f0 irq 14
[ 0.704910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0f8 irq 15
[ 0.704927] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.704932] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.704954] ata2: port disabled--ignoring
[ 0.704964] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.705323] scsi2 : ata_piix
[ 0.705394] scsi3 : ata_piix
[ 0.705439] ata3: SATA max UDMA/133 cmd 0xd0e0 ctl 0xd0d0 bmdma 0xd0a0 irq 19
[ 0.705442] ata4: SATA max UDMA/133 cmd 0xd0c0 ctl 0xd0b0 bmdma 0xd0a8 irq 19
[ 0.705814] Fixed MDIO Bus: probed
[ 0.705836] tun: Universal TUN/TAP device driver, 1.6
[ 0.705838] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.705935] PPP generic driver version 2.4.2
[ 0.706034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.706048] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.706061] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.706065] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.706108] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.706128] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.706138] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.710028] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.710041] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5104000
[ 0.724020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.724190] hub 1-0:1.0: USB hub found
[ 0.724195] hub 1-0:1.0: 8 ports detected
[ 0.724270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.724283] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.724298] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.724304] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.724307] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.724352] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.724374] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
[ 0.724496] hub 2-0:1.0: USB hub found
[ 0.724499] hub 2-0:1.0: 2 ports detected
[ 0.724562] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.724569] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.724572] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.724612] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.724633] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
[ 0.724752] hub 3-0:1.0: USB hub found
[ 0.724756] hub 3-0:1.0: 2 ports detected
[ 0.724814] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.724820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.724823] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.724866] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.724896] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
[ 0.725014] hub 4-0:1.0: USB hub found
[ 0.725017] hub 4-0:1.0: 2 ports detected
[ 0.725076] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.725083] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.725086] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.725127] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.725156] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
[ 0.725276] hub 5-0:1.0: USB hub found
[ 0.725280] hub 5-0:1.0: 2 ports detected
[ 0.725387] usbcore: registered new interface driver libusual
[ 0.725442] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.728242] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.728248] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.728377] mousedev: PS/2 mouse device common for all mice
[ 0.728545] rtc_cmos 00:09: RTC can wake from S4
[ 0.728642] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.728664] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.728716] device-mapper: uevent: version 1.0.3
[ 0.728783] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.728813] EISA: Probing bus 0 at eisa.0
[ 0.728815] EISA: Cannot allocate resource for mainboard
[ 0.728817] Cannot allocate resource for EISA slot 1
[ 0.728819] Cannot allocate resource for EISA slot 2
[ 0.728820] Cannot allocate resource for EISA slot 3
[ 0.728822] Cannot allocate resource for EISA slot 4
[ 0.728824] Cannot allocate resource for EISA slot 5
[ 0.728825] Cannot allocate resource for EISA slot 6
[ 0.728827] Cannot allocate resource for EISA slot 7
[ 0.728829] Cannot allocate resource for EISA slot 8
[ 0.728830] EISA: Detected 0 cards.
[ 0.728839] cpufreq-nforce2: No nForce2 chipset.
[ 0.728841] cpuidle: using governor ladder
[ 0.728843] cpuidle: using governor menu
[ 0.728845] EFI Variables Facility v0.08 2004-May-17
[ 0.729095] TCP cubic registered
[ 0.729211] NET: Registered protocol family 10
[ 0.729738] NET: Registered protocol family 17
[ 0.729743] Registering the dns_resolver key type
[ 0.729760] Using IPI No-Shortcut mode
[ 0.729854] PM: Hibernation image not present or could not be loaded.
[ 0.729866] registered taskstats version 1
[ 0.736276] Magic number: 13:624:433
[ 0.736358] rtc_cmos 00:09: setting system clock to 2013-05-25 13:26:12 UTC (1369488372)
[ 0.736523] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.736525] EDD information not available.
[ 0.749642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.860269] ata4.01: NODEV after polling detection
[ 0.868243] ata4.00: ATAPI: ATAPI DVD A DH24AYL, ZP5W, max UDMA/100
[ 0.869094] ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
[ 0.869100] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.877122] ata3.00: configured for UDMA/133
[ 0.877275] scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
[ 0.877392] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.877429] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.877448] sd 2:0:0:0: [sda] Write Protect is off
[ 0.877451] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.877472] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.884134] ata4.00: configured for UDMA/100
[ 0.886010] scsi 3:0:0:0: CD-ROM ATAPI DVD A DH24AYL ZP5W PQ: 0 ANSI: 5
[ 0.888336] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.888341] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.888479] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.888590] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 0.938916] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 0.939403] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.939468] Freeing unused kernel memory: 744k freed
[ 0.939746] Write protecting the kernel text: 5832k
[ 0.939762] Write protecting the kernel read-only data: 2384k
[ 0.939763] NX-protecting the kernel data: 4408k
[ 0.954328] udevd[93]: starting version 175
[ 1.002620] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.002642] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.002669] r8169 0000:03:00.0: setting latency timer to 64
[ 1.002740] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.003217] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf8412000, 00:1c:c0:b9:1e:c3, XID 98500000 IRQ 43
[ 1.003220] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.042052] FDC 0 is a post-1991 82077
[ 1.148029] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.232022] Refined TSC clocksource calibration: 2499.949 MHz.
[ 1.232031] Switching to clocksource tsc
[ 1.280890] hub 1-4:1.0: USB hub found
[ 1.280970] hub 1-4:1.0: 4 ports detected
[ 1.392054] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1.617737] Initializing USB Mass Storage driver...
[ 1.617822] scsi4 : usb-storage 1-5:1.0
[ 1.617887] usbcore: registered new interface driver usb-storage
[ 1.617889] USB Mass Storage support registered.
[ 1.856022] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.019530] scsi5 : usb-storage 2-1:1.0
[ 2.108115] usb 1-4.1: new full-speed USB device number 5 using ehci_hcd
[ 2.217922] hub 1-4.1:1.0: USB hub found
[ 2.218105] hub 1-4.1:1.0: 3 ports detected
[ 2.304112] usb 1-4.4: new high-speed USB device number 6 using ehci_hcd
[ 2.576114] usb 1-4.1.1: new full-speed USB device number 7 using ehci_hcd
[ 2.646642] scsi 4:0:0:0: Direct-Access Generic 2.0 Reader-CF 1.00 PQ: 0 ANSI: 0 CCS
[ 2.677140] scsi 4:0:0:1: Direct-Access Generic 2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS
[ 2.677686] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.677823] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 2.682613] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.683613] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.740117] usb 1-4.1.2: new full-speed USB device number 8 using ehci_hcd
[ 2.904111] usb 1-4.1.3: new full-speed USB device number 9 using ehci_hcd
[ 3.020450] scsi 5:0:0:0: CD-ROM Supereal VR DISK 1.00 PQ: 0 ANSI: 0
[ 3.025427] sr1: scsi3-mmc drive: 126x/126x writer cd/rw xa/form2 tray
[ 3.025574] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 3.025644] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 41.622226] Adding 2000088k swap on /dev/sda4. Priority:-1 extents:1 across:2000088k
[ 42.588749] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.722448] udevd[587]: starting version 175
[ 42.798463] lp: driver loaded but no devices found
[ 42.799959] Bluetooth: Core ver 2.16
[ 42.799977] NET: Registered protocol family 31
[ 42.799979] Bluetooth: HCI device and connection manager initialized
[ 42.799982] Bluetooth: HCI socket layer initialized
[ 42.799983] Bluetooth: L2CAP socket layer initialized
[ 42.799988] Bluetooth: SCO socket layer initialized
[ 42.802525] usbcore: registered new interface driver dm9601
[ 42.803176] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 42.803179] Bluetooth: BNEP filters: protocol multicast
[ 42.827035] Bluetooth: RFCOMM TTY layer initialized
[ 42.827040] Bluetooth: RFCOMM socket layer initialized
[ 42.827041] Bluetooth: RFCOMM ver 1.11
[ 42.861613] ppdev: user-space parallel port driver
[ 42.906714] type=1400 audit(1369502814.665:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=674 comm="apparmor_parser"
[ 42.907198] type=1400 audit(1369502814.665:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=674 comm="apparmor_parser"
[ 42.940234] intel_rng: Firmware space is locked read-only. If you can't or
[ 42.940235] intel_rng: don't want to disable this in firmware setup, and if
[ 42.940236] intel_rng: you are certain that your system has a functional
[ 42.940237] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 42.967159] Linux video capture interface: v2.00
[ 42.971662] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 42.974115] cx88[0]: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58,autodetected], frontend(s): 1
[ 42.974118] cx88[0]: TV tuner type 76, Radio tuner type -1
[ 42.974185] leds_ss4200: no LED devices found
[ 42.982055] IR NEC protocol handler initialized
[ 42.989678] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 42.990437] IR RC5(x) protocol handler initialized
[ 42.996822] nvidia: module license 'NVIDIA' taints kernel.
[ 42.996827] Disabling lock debugging due to kernel taint
[ 42.999137] IR RC6 protocol handler initialized
[ 43.015316] type=1400 audit(1369502814.773:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=775 comm="apparmor_parser"
[ 43.015832] type=1400 audit(1369502814.773:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=775 comm="apparmor_parser"
[ 43.016104] type=1400 audit(1369502814.777:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=775 comm="apparmor_parser"
[ 43.019699] IR JVC protocol handler initialized
[ 43.022151] type=1400 audit(1369502814.781:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=778 comm="apparmor_parser"
[ 43.028550] IR Sony protocol handler initialized
[ 43.210484] IR MCE Keyboard/mouse protocol handler initialized
[ 43.222300] i2c-core: driver [tuner] using legacy suspend method
[ 43.222303] i2c-core: driver [tuner] using legacy resume method
[ 43.331670] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 43.345274] usbcore: registered new interface driver btusb
[ 43.371079] tuner 0-0064: Tuner -1 found with type(s) Radio TV.
[ 43.410884] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam VX-2000 (045e:0761)
[ 43.413128] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 43.413139] nvidia 0000:01:00.0: setting latency timer to 64
[ 43.413144] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:ow ns=io+mem
[ 43.413469] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.88 Wed Mar 27 14:31:12 PDT 2013
[ 43.414074] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam VX-2000 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input4
[ 43.414155] usbcore: registered new interface driver uvcvideo
[ 43.414157] USB Video Class driver (1.1.1)
[ 43.415851] cx2388x alsa driver version 0.0.9 loaded
[ 43.416856] lirc_dev: IR Remote Control driver registered, major 251
[ 43.417074] IR LIRC bridge handler initialized
[ 43.418735] xc5000 0-0064: creating new instance
[ 43.419720] xc5000: Successfully identified at address 0x64
[ 43.419721] xc5000: Firmware has not been loaded previously
[ 43.419725] cx88[0]: Calling XC5000 callback
[ 43.433901] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 43.433958] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 43.433983] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 43.445799] usbcore: registered new interface driver snd-usb-audio
[ 43.456328] Registered IR keymap rc-pinnacle-pctv-hd
[ 43.456474] input: cx88 IR (Pinnacle PCTV HD 800i) as /devices/pci0000:00/0000:00:1e.0/0000:04:06.2/rc/rc0/input5
[ 43.456546] rc0: cx88 IR (Pinnacle PCTV HD 800i) as /devices/pci0000:00/0000:00:1e.0/0000:04:06.2/rc/rc0
[ 43.458838] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input6
[ 43.458953] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 43.458957] cx88[0]/2: cx2388x 8802 Driver Manager
[ 43.458979] cx88-mpeg driver manager 0000:04:06.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 43.458987] cx88[0]/2: found at 0000:04:06.2, rev: 5, irq: 21, latency: 32, mmio: 0xf6000000
[ 43.459111] cx8800 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 43.459118] cx88[0]/0: found at 0000:04:06.0, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
[ 43.462060] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
[ 43.474335] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 43.474338] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 43.474342] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58]
[ 43.490792] hda_codec: ALC888: BIOS auto-probing.
[ 43.490796] hda_codec: ALC888: SKU not ready 0x411111f0
[ 43.511758] init: failsafe main process (953) killed by TERM signal
[ 43.519834] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 43.520179] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 43.520362] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 43.569845] ndiswrapper version 1.58 loaded (smp=yes, preempt=no)
[ 43.605331] type=1400 audit(1369502815.365:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1120 comm="apparmor_parser"
[ 43.605430] type=1400 audit(1369502815.365:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1121 comm="apparmor_parser"
[ 43.612136] type=1400 audit(1369502815.373:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1121 comm="apparmor_parser"
[ 43.612370] type=1400 audit(1369502815.373:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1121 comm="apparmor_parser"
[ 43.616777] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input10
[ 43.618036] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.7-4.1.1/input0
[ 43.623700] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.0/input/input11
[ 43.626021] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.7-4.1.2/input0
[ 43.626068] usbcore: registered new interface driver usbhid
[ 43.626070] usbhid: USB HID core driver
[ 43.631225] usb 1-4.1.1: input irq status -75 received
[ 43.685660] r8169 0000:03:00.0: eth0: link down
[ 43.685850] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.686342] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.746730] xc5000: firmware read 12401 bytes.
[ 43.746733] xc5000: firmware uploading...
[ 43.746735] cx88[0]: Calling XC5000 callback
[ 44.196974] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input12
[ 45.808024] xc5000: firmware upload complete...
[ 46.484221] cx88[0]/0: registered device video1 [v4l2]
[ 46.484261] cx88[0]/0: registered device vbi0
[ 46.484353] cx88_audio 0000:04:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 46.484383] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 46.484811] cx88[0]/2: cx2388x based DVB/ATSC card
[ 46.484813] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 46.536449] xc5000 0-0064: attaching existing instance
[ 46.537439] xc5000: Successfully identified at address 0x64
[ 46.537441] xc5000: Firmware has been loaded previously
[ 46.538088] cx88[0]: Calling XC5000 callback
[ 46.538730] DVB: registering new adapter (cx88[0])
[ 46.538733] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 46.539907] cx88[0]: Calling XC5000 callback
[ 46.542771] cx88[0]: Calling XC5000 callback
[ 46.660034] usb 2-1: reset full-speed USB device number 2 using uhci_hcd
[ 46.822297] vboxdrv: Found 2 processor cores.
[ 46.822419] vboxdrv: fAsync=0 offMin=0x296 offMax=0x96c
[ 46.822477] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 46.822479] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 46.834274] vboxpci: IOMMU not found (not registered)
[ 46.850638] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'RtlTimeToTimeFields'
[ 46.850766] ndiswrapper (load_sys_files:199): couldn't prepare driver 'usb_ethernet_adaptor'
[ 46.850797] ndiswrapper (load_wrap_driver:121): couldn't load driver 'usb_ethernet_adaptor'
[ 46.858144] usbcore: registered new interface driver ndiswrapper
[ 46.914545] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 46.914548] vesafb: scrolling: redraw
[ 46.914551] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 46.915948] vesafb: framebuffer at 0xf3000000, mapped to 0xf8b00000, using 1216k, total 1216k
[ 46.916392] Console: switching to colour frame buffer device 80x30
[ 46.916404] fb0: VESA VGA frame buffer device
[ 46.970773] init: kdm main process (1674) killed by TERM signal
[ 48.038710] NVRM: Your system is not currently configured to drive a VGA console
[ 48.038714] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 48.038716] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 48.038718] NVRM: drivers including, but not limited to, vesafb, may result in
[ 48.038720] NVRM: corruption and stability problems, and is not supported.
[ 53.380196] v4l2loopack driver version 1.0.2 loaded
[ 53.599171] init: plymouth-stop pre-start process (3087) terminated with status 1
[ 96.824038] usb 1-8: new high-speed USB device number 10 using ehci_hcd
[ 97.004232] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 97.005915] r8712u: DriverVersion: v7_0.20100831
[ 97.005931] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 97.005934] r8712u: USB_SPEED_HIGH with 4 endpoints
[ 97.006650] r8712u: Boot from EFUSE: Autoload OK
[ 97.803380] r8712u: CustomerID = 0x0000
[ 97.803384] r8712u: MAC Address from efuse = 08:86:3b:7a:75:31
[ 97.803387] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 97.803563] usbcore: registered new interface driver r8712u
[ 98.564629] r8712u: 1 RCR=0x153f00e
[ 98.565624] r8712u: 2 RCR=0x553f00e
[ 98.672568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 98.672812] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 109.013000] r8712u: wpa_set_encryption, crypt.alg = WEP
[ 109.520461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 144.894144] cx88[0]: Calling XC5000 callback
[ 145.759450] cx88[0]: Calling XC5000 callback
[ 146.088505] cx88[0]: Calling XC5000 callback
[ 146.162762] cx88[0]: Calling XC5000 callback

[praseodym]

After reboot it is in storage mode again?

[Adam_GUI]

After reboot it is in storage mode again?

It doesn't automount, but it shows up in devices.
Under windows, it works as an autodelivery for the driver.

I just checked my boneyard and I think I've found a PCI Ethernet cable. I'm going to scrap it out and keep testing as needed until this dongle is sorted.