slimeph
April 26th, 2013, 03:33 AM
Grub couldn't see my windows installation
update-grub couldn't find windows installation.
What I've tried so far:
* The suggestions in http://ubuntuforums.org/showthread.php?t=1758396
Please help.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/mnt/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System:
Boot files:
sda6: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 1198. But according to the info from fdisk,
sda6 starts at sector 237795328.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda7: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 4.06-pre1
Boot sector info: Syslinux looks at sector 31000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 29,085,695 29,083,648 83 Linux
/dev/sda2 29,087,742 312,580,095 283,492,354 f W95 Extended (LBA)
/dev/sda5 32,994,031 237,794,129 204,800,099 7 NTFS / exFAT / HPFS
/dev/sda6 237,795,328 312,580,095 74,784,768 7 NTFS / exFAT / HPFS
/dev/sda7 29,087,744 32,993,279 3,905,536 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 4075 MB, 4075290624 bytes
256 heads, 63 sectors/track, 493 cylinders, total 7959552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 7,959,551 7,957,504 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 87fa974e-d025-4151-b872-684e73513a6f ext4
/dev/sda5 ECF8BE60F8BE292A ntfs data
/dev/sda6 2638128738125661 ntfs sys7
/dev/sda7 13bc54aa-7026-4802-a117-5a538759fdae swap
/dev/sdb1 1B11-1A61 vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /mnt ext4 (rw)
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda6 /media/sys7 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
/dev/sdb1 /media/PENDRIVE vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
set locale_dir=($root)/boot/grub/locale
set lang=en_PH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=87fa974e-d025-4151-b872-684e73513a6f ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
echo 'Loading Linux 3.2.0-23-generic-pae ...'
linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=87fa974e-d025-4151-b872-684e73513a6f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=87fa974e-d025-4151-b872-684e73513a6f / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=13bc54aa-7026-4802-a117-5a538759fdae none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic-pae 2
= boot/vmlinuz-3.2.0-23-generic-pae 1
= initrd.img 2
= vmlinuz 1
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/menu.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 00 60 09 00 13 57 f3 00 a6 f5 7c 44 15 1f 00 00 |.`...W....|D....|
00000010 e9 8d 48 a2 e9 f8 7c 44 d5 7a 00 00 00 d6 3e c3 |..H...|D.z....>.|
00000020 a4 19 7d 44 45 81 01 00 dc 92 ff cc 46 1a 7d 44 |..}DE.......F.}D|
00000030 30 00 00 00 1c 23 75 ec bb 1e 7d 44 05 1e 2e 01 |0....#u...}D....|
00000040 6a 50 e8 67 b1 29 7d 44 80 4d 00 00 07 33 d5 fb |jP.g.)}D.M...3..|
00000050 dc 2b 7d 44 05 30 00 00 ad 6e 1a 97 57 31 7d 44 |.+}D.0...n..W1}D|
00000060 30 20 00 00 1e b0 43 20 57 31 7d 44 30 20 00 00 |0 ....C W1}D0 ..|
00000070 a6 d4 49 5c 57 31 7d 44 35 20 00 00 4c 88 ed 18 |..I\W1}D5 ..L...|
00000080 57 31 7d 44 35 20 00 00 f2 a9 32 45 57 31 7d 44 |W1}D5 ....2EW1}D|
00000090 35 20 00 00 a3 fa ac e6 57 31 7d 44 37 20 00 00 |5 ......W1}D7 ..|
000000a0 df d9 a3 64 62 33 7d 44 05 e0 0e 00 53 0f 28 1e |...db3}D....S.(.|
000000b0 91 45 7d 44 05 30 00 00 6d 19 88 c7 3c 49 7d 44 |.E}D.0..m...<I}D|
000000c0 85 ae 04 00 61 54 57 d7 03 52 7d 44 00 bb 0e 00 |....aTW..R}D....|
000000d0 ce 06 84 73 d6 57 7d 44 d0 3f 00 00 45 77 e3 61 |...s.W}D.?..Ew.a|
000000e0 50 61 7d 44 85 9a 00 00 e0 a0 2f c3 7e 65 7d 44 |Pa}D....../.~e}D|
000000f0 00 ed 00 00 0a 39 6b c0 eb 6a 7d 44 05 30 00 00 |.....9k..j}D.0..|
00000100 24 05 3f c0 a6 6c 7d 44 00 c0 02 00 3b 65 08 57 |$.?..l}D....;e.W|
00000110 dd 6c 7d 44 90 1f 00 00 82 e4 40 b0 a7 71 7d 44 |.l}D......@..q}D|
00000120 45 53 23 00 20 a8 23 be 33 75 7d 44 85 e6 09 00 |ES#. .#.3u}D....|
00000130 7d 31 f2 14 aa 80 7d 44 c0 b4 01 00 5c 6d 8b 7b |}1....}D....\m.{|
00000140 b6 88 7d 44 15 76 00 00 20 a5 cf d8 05 91 7d 44 |..}D.v.. .....}D|
00000150 04 37 00 00 22 d9 d7 93 7c 95 7d 44 05 03 00 00 |.7.."...|.}D....|
00000160 ea 51 22 dc 85 97 7d 44 12 10 00 00 5e a1 58 c3 |.Q"...}D....^.X.|
00000170 ea 99 7d 44 d5 70 00 00 1a 32 de e9 be 9a 7d 44 |..}D.p...2....}D|
00000180 05 a0 1a 00 f7 56 88 6d 4d b0 7d 44 00 40 12 00 |.....V.mM.}D.@..|
00000190 99 5e 2a f8 08 b4 7d 44 83 20 01 00 94 3d c3 aa |.^*...}D. ...=..|
000001a0 24 b5 7d 44 55 1b 00 00 5f f7 a5 6b 8e bf 7d 44 |$.}DU..._..k..}D|
000001b0 95 0b 00 00 07 17 63 5a 9a c0 7d 44 00 30 00 fe |......cZ..}D.0..|
000001c0 ff ff 07 fe ff ff f1 9a 3b 00 63 00 35 0c 00 fe |........;.c.5...|
000001d0 ff ff 05 fe ff ff 54 9b 70 0c ae 24 75 04 00 00 |......T.p..$u...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
update-grub couldn't find windows installation.
What I've tried so far:
* The suggestions in http://ubuntuforums.org/showthread.php?t=1758396
Please help.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/mnt/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63.
Operating System:
Boot files:
sda6: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 1198. But according to the info from fdisk,
sda6 starts at sector 237795328.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda7: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 4.06-pre1
Boot sector info: Syslinux looks at sector 31000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 29,085,695 29,083,648 83 Linux
/dev/sda2 29,087,742 312,580,095 283,492,354 f W95 Extended (LBA)
/dev/sda5 32,994,031 237,794,129 204,800,099 7 NTFS / exFAT / HPFS
/dev/sda6 237,795,328 312,580,095 74,784,768 7 NTFS / exFAT / HPFS
/dev/sda7 29,087,744 32,993,279 3,905,536 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 4075 MB, 4075290624 bytes
256 heads, 63 sectors/track, 493 cylinders, total 7959552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 7,959,551 7,957,504 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 87fa974e-d025-4151-b872-684e73513a6f ext4
/dev/sda5 ECF8BE60F8BE292A ntfs data
/dev/sda6 2638128738125661 ntfs sys7
/dev/sda7 13bc54aa-7026-4802-a117-5a538759fdae swap
/dev/sdb1 1B11-1A61 vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /mnt ext4 (rw)
/dev/sda1 / ext4 (rw,errors=remount-ro)
/dev/sda6 /media/sys7 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
/dev/sdb1 /media/PENDRIVE vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
set locale_dir=($root)/boot/grub/locale
set lang=en_PH
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=87fa974e-d025-4151-b872-684e73513a6f ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
echo 'Loading Linux 3.2.0-23-generic-pae ...'
linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=87fa974e-d025-4151-b872-684e73513a6f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 87fa974e-d025-4151-b872-684e73513a6f
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=87fa974e-d025-4151-b872-684e73513a6f / ext4 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=13bc54aa-7026-4802-a117-5a538759fdae none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic-pae 2
= boot/vmlinuz-3.2.0-23-generic-pae 1
= initrd.img 2
= vmlinuz 1
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/menu.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 00 60 09 00 13 57 f3 00 a6 f5 7c 44 15 1f 00 00 |.`...W....|D....|
00000010 e9 8d 48 a2 e9 f8 7c 44 d5 7a 00 00 00 d6 3e c3 |..H...|D.z....>.|
00000020 a4 19 7d 44 45 81 01 00 dc 92 ff cc 46 1a 7d 44 |..}DE.......F.}D|
00000030 30 00 00 00 1c 23 75 ec bb 1e 7d 44 05 1e 2e 01 |0....#u...}D....|
00000040 6a 50 e8 67 b1 29 7d 44 80 4d 00 00 07 33 d5 fb |jP.g.)}D.M...3..|
00000050 dc 2b 7d 44 05 30 00 00 ad 6e 1a 97 57 31 7d 44 |.+}D.0...n..W1}D|
00000060 30 20 00 00 1e b0 43 20 57 31 7d 44 30 20 00 00 |0 ....C W1}D0 ..|
00000070 a6 d4 49 5c 57 31 7d 44 35 20 00 00 4c 88 ed 18 |..I\W1}D5 ..L...|
00000080 57 31 7d 44 35 20 00 00 f2 a9 32 45 57 31 7d 44 |W1}D5 ....2EW1}D|
00000090 35 20 00 00 a3 fa ac e6 57 31 7d 44 37 20 00 00 |5 ......W1}D7 ..|
000000a0 df d9 a3 64 62 33 7d 44 05 e0 0e 00 53 0f 28 1e |...db3}D....S.(.|
000000b0 91 45 7d 44 05 30 00 00 6d 19 88 c7 3c 49 7d 44 |.E}D.0..m...<I}D|
000000c0 85 ae 04 00 61 54 57 d7 03 52 7d 44 00 bb 0e 00 |....aTW..R}D....|
000000d0 ce 06 84 73 d6 57 7d 44 d0 3f 00 00 45 77 e3 61 |...s.W}D.?..Ew.a|
000000e0 50 61 7d 44 85 9a 00 00 e0 a0 2f c3 7e 65 7d 44 |Pa}D....../.~e}D|
000000f0 00 ed 00 00 0a 39 6b c0 eb 6a 7d 44 05 30 00 00 |.....9k..j}D.0..|
00000100 24 05 3f c0 a6 6c 7d 44 00 c0 02 00 3b 65 08 57 |$.?..l}D....;e.W|
00000110 dd 6c 7d 44 90 1f 00 00 82 e4 40 b0 a7 71 7d 44 |.l}D......@..q}D|
00000120 45 53 23 00 20 a8 23 be 33 75 7d 44 85 e6 09 00 |ES#. .#.3u}D....|
00000130 7d 31 f2 14 aa 80 7d 44 c0 b4 01 00 5c 6d 8b 7b |}1....}D....\m.{|
00000140 b6 88 7d 44 15 76 00 00 20 a5 cf d8 05 91 7d 44 |..}D.v.. .....}D|
00000150 04 37 00 00 22 d9 d7 93 7c 95 7d 44 05 03 00 00 |.7.."...|.}D....|
00000160 ea 51 22 dc 85 97 7d 44 12 10 00 00 5e a1 58 c3 |.Q"...}D....^.X.|
00000170 ea 99 7d 44 d5 70 00 00 1a 32 de e9 be 9a 7d 44 |..}D.p...2....}D|
00000180 05 a0 1a 00 f7 56 88 6d 4d b0 7d 44 00 40 12 00 |.....V.mM.}D.@..|
00000190 99 5e 2a f8 08 b4 7d 44 83 20 01 00 94 3d c3 aa |.^*...}D. ...=..|
000001a0 24 b5 7d 44 55 1b 00 00 5f f7 a5 6b 8e bf 7d 44 |$.}DU..._..k..}D|
000001b0 95 0b 00 00 07 17 63 5a 9a c0 7d 44 00 30 00 fe |......cZ..}D.0..|
000001c0 ff ff 07 fe ff ff f1 9a 3b 00 63 00 35 0c 00 fe |........;.c.5...|
000001d0 ff ff 05 fe ff ff 54 9b 70 0c ae 24 75 04 00 00 |......T.p..$u...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected