praveenkumarka
February 8th, 2013, 12:47 PM
Hi
I have same problem. I run the bootinfo script and got the REUSLTS.txt file pasted below
What to do next.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector
629197378 of the same hard drive for core.img. core.img is at this
location and looks for (,gpt6)/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi
sda2: __________________________________________________ ________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/core.img
sda7: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /etc/fstab
sda9: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 2012-10-23
Boot sector info: Syslinux looks at sector 60876 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 206,847 204,800 EFI System partition
/dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 468,992 209,717,247 209,248,256 Data partition (Windows/Linux)
/dev/sda4 209,717,248 419,432,447 209,715,200 Data partition (Windows/Linux)
/dev/sda5 419,432,448 629,147,647 209,715,200 Data partition (Windows/Linux)
/dev/sda6 629,147,648 629,342,207 194,560 Data partition (Windows/Linux)
/dev/sda7 629,342,208 645,343,231 16,001,024 Swap partition (Linux)
/dev/sda8 645,343,232 705,343,487 60,000,256 Data partition (Windows/Linux)
/dev/sda9 705,343,488 976,771,071 271,427,584 Data partition (Windows/Linux)
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 62 15,635,593 15,635,532 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 DC19-0B8E vfat
/dev/sda3 FE703B80703B3EA9 ntfs
/dev/sda4 AA1A8E141A8DDDA7 ntfs New Volume
/dev/sda5 0A7A9A2D7A9A1593 ntfs New Volume
/dev/sda6 bd33069f-572f-4f36-bd8f-5a4d78ce5356 ext4
/dev/sda7 83c3a049-558a-4cd7-b758-c5042f549e4f swap
/dev/sda8 f13646fd-7298-48dd-bf5e-b94966411132 ext4
/dev/sda9 2fc8d75f-fb02-48cd-a255-73eaa38fb616 ext4
/dev/sdc1 1CF4-0808 vfat PENDRIVE
/dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /media/PENDRIVE vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,d mask=0077,utf8=1,showexec,flush,uhelper=udisks)
/dev/sr0 /cdrom iso9660 (ro,noatime)
============================= sda6/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_gpt
insmod ext2
set root='(hd0,gpt8)'
search --no-floppy --fs-uuid --set=root f13646fd-7298-48dd-bf5e-b94966411132
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
set locale_dir=($root)/grub/locale
set lang=en_IN
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux /vmlinuz-3.2.0-29-generic-pae root=UUID=f13646fd-7298-48dd-bf5e-b94966411132 ro quiet splash $vt_handoff
initrd /initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /vmlinuz-3.2.0-29-generic-pae root=UUID=f13646fd-7298-48dd-bf5e-b94966411132 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /initrd.img-3.2.0-29-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= grub/core.img 1
= grub/grub.cfg 1
= initrd.img-3.2.0-29-generic-pae 2
= vmlinuz-3.2.0-29-generic-pae 1
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda8 during installation
UUID=f13646fd-7298-48dd-bf5e-b94966411132 / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda6 during installation
UUID=bd33069f-572f-4f36-bd8f-5a4d78ce5356 /boot ext4 defaults 0 2
# /home was on /dev/sda9 during installation
UUID=2fc8d75f-fb02-48cd-a255-73eaa38fb616 /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=83c3a049-558a-4cd7-b758-c5042f549e4f none swap sw 0 0
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/menu.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
I have same problem. I run the bootinfo script and got the REUSLTS.txt file pasted below
What to do next.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector
629197378 of the same hard drive for core.img. core.img is at this
location and looks for (,gpt6)/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi
sda2: __________________________________________________ ________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files: /grub/grub.cfg /grub/core.img
sda7: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /etc/fstab
sda9: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 2012-10-23
Boot sector info: Syslinux looks at sector 60876 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 206,847 204,800 EFI System partition
/dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows)
/dev/sda3 468,992 209,717,247 209,248,256 Data partition (Windows/Linux)
/dev/sda4 209,717,248 419,432,447 209,715,200 Data partition (Windows/Linux)
/dev/sda5 419,432,448 629,147,647 209,715,200 Data partition (Windows/Linux)
/dev/sda6 629,147,648 629,342,207 194,560 Data partition (Windows/Linux)
/dev/sda7 629,342,208 645,343,231 16,001,024 Swap partition (Linux)
/dev/sda8 645,343,232 705,343,487 60,000,256 Data partition (Windows/Linux)
/dev/sda9 705,343,488 976,771,071 271,427,584 Data partition (Windows/Linux)
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 8011 MB, 8011120640 bytes
247 heads, 62 sectors/track, 1021 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 62 15,635,593 15,635,532 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 DC19-0B8E vfat
/dev/sda3 FE703B80703B3EA9 ntfs
/dev/sda4 AA1A8E141A8DDDA7 ntfs New Volume
/dev/sda5 0A7A9A2D7A9A1593 ntfs New Volume
/dev/sda6 bd33069f-572f-4f36-bd8f-5a4d78ce5356 ext4
/dev/sda7 83c3a049-558a-4cd7-b758-c5042f549e4f swap
/dev/sda8 f13646fd-7298-48dd-bf5e-b94966411132 ext4
/dev/sda9 2fc8d75f-fb02-48cd-a255-73eaa38fb616 ext4
/dev/sdc1 1CF4-0808 vfat PENDRIVE
/dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /media/PENDRIVE vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,d mask=0077,utf8=1,showexec,flush,uhelper=udisks)
/dev/sr0 /cdrom iso9660 (ro,noatime)
============================= sda6/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_gpt
insmod ext2
set root='(hd0,gpt8)'
search --no-floppy --fs-uuid --set=root f13646fd-7298-48dd-bf5e-b94966411132
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
set locale_dir=($root)/grub/locale
set lang=en_IN
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux /vmlinuz-3.2.0-29-generic-pae root=UUID=f13646fd-7298-48dd-bf5e-b94966411132 ro quiet splash $vt_handoff
initrd /initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /vmlinuz-3.2.0-29-generic-pae root=UUID=f13646fd-7298-48dd-bf5e-b94966411132 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /initrd.img-3.2.0-29-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt6)'
search --no-floppy --fs-uuid --set=root bd33069f-572f-4f36-bd8f-5a4d78ce5356
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= grub/core.img 1
= grub/grub.cfg 1
= initrd.img-3.2.0-29-generic-pae 2
= vmlinuz-3.2.0-29-generic-pae 1
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda8 during installation
UUID=f13646fd-7298-48dd-bf5e-b94966411132 / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda6 during installation
UUID=bd33069f-572f-4f36-bd8f-5a4d78ce5356 /boot ext4 defaults 0 2
# /home was on /dev/sda9 during installation
UUID=2fc8d75f-fb02-48cd-a255-73eaa38fb616 /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=83c3a049-558a-4cd7-b758-c5042f549e4f none swap sw 0 0
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/menu.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/menu.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected