Which acc decoder do I need?

[Azyx]

Have an playst to Svedish streaming radio


#EXTM3U

#EXTINF:-1,Sveriges Radio
http://http-live.sr.se/p1-aac-96

It work with VLC, but for Gstreamer there are no decoder that work. I work with Gstreamer and Clementine on my 10.04, but I don't know which decoder I need.

Is there a way to see what kind of decoder I need either on my working player or via VLC or by checking the stream or something?

/Cheers

[shantiq]

mediainfo p1-aac-96
General
Complete name : p1-aac-96
Format : ADTS
Format/Info : Audio Data Transport Stream
File size : 4.76 MiB

Audio
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 2
Format profile : HE-AAC / LC
Bit rate mode : Constant / Variable
Bit rate : 94.2 Kbps
Minimum bit rate : 158 Kbps
Maximum bit rate : 249 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz / 24.0 KHz
Compression mode : Lossy
Stream size : 4.76 MiB (100%)


so HE-AAC ADTS is the audio file




see below for solution

[shantiq]

Swedish radio
(http://www.listenlive.eu/sweden.html)


right-click on 96k [there is 192k too if you want better def] and save pls file now try in clementine and mplayer should be fine:KS
or try the mp3 version[winamp logo] right at the top in the same way

============


if still a problem open in text editor and extract the address
here is the address copy without word mplayer and open location in Mplayer gui or clementine


mplayer http://http-live.sr.se/p1-aac-96 or


mplayer http://http-live.sr.se/p1-aac-192


you had the right decoder the address just got messed up to something that cannot be read by all players

=================


you could simply copy third line in your original Code box in your post and add location to Mplayer Clementine / as you see same address

[Azyx]

Swedish radio
(http://www.listenlive.eu/sweden.html)


right-click on 96k [there is 192k too if you want better def] and save pls file now try in clementine and mplayer should be fine:KS
or try the mp3 version[winamp logo] right at the top in the same way

============


if still a problem open in text editor and extract the address
here is the address copy without word mplayer and open location in Mplayer gui or clementine


mplayer http://http-live.sr.se/p1-aac-96 or


mplayer http://http-live.sr.se/p1-aac-192
you had the right decoder the address just got messed up to something that cannot be read by all players

=================


you could simply copy third line in your original Code box in your post and add location to Mplayer Clementine / as you see same address

I'm not interested i either mplayer or xmms, it is a ploblem with gstreamer on my newly installed 12.04 Ubuntu. With my 'old' 12.04 or 10.04 there are no problem to play the m3u-lists. But as you says, the problem are maybe not codecs, but something else i gstreamer?

[Azyx]

If I add strem
http://http-live.sr.se/p1-aac-96 in Clementine I get the message:

'Could not decode stream'
'Could not decode stream'
'Could not decode stream'
.....

Until I stop the player...

It now also affect my 'old' 12.04 Ubuntu, so it seems to be a problem according to an update?

I have saved the radio streams m3u-file to not have to go out to internet and search after radio-channel everytime I get a new computer (Have used the m3u-files many years), just get the saved m3u-files on my local file-server. And I still work with VLC and on my 10.04LST machines Clementine and the default media player (Totem and Rhytmbox?) who user Gstreamer as media-engine.

[Azyx]

When i open Clementine in a terminal I get this message when I try to open the radio-stream:


12:42:58.881 DEBUG GnomeGlobalShortcutBackend:93 registered
12:43:49.749 ERROR GstEnginePipeline:506 1 "gstffmpegdec.c(2215): gst_ffmpegdec_audio_frame (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-0/GstDecodeBin2:decodebin20/ffdec_aac:ffdec_aac0:
Decoding of AAC stream by FFMPEG failed."
12:43:49.749 WARN GstEngine:585 Gstreamer error: "Could not decode stream."
12:43:50.508 ERROR GstEnginePipeline:506 2 "gstffmpegdec.c(2215): gst_ffmpegdec_audio_frame (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-14/GstDecodeBin2:decodebin21/ffdec_aac:ffdec_aac1:
Decoding of AAC stream by FFMPEG failed."
12:43:50.508 WARN GstEngine:585 Gstreamer error: "Could not decode stream."
12:43:51.120 ERROR GstEnginePipeline:506 3 "gstffmpegdec.c(2215): gst_ffmpegdec_audio_frame (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-28/GstDecodeBin2:decodebin22/ffdec_aac:ffdec_aac2:
..............Until I stop the player

/Cheers

[shantiq]

Azyx i do not understand what you wrote

read again carefully what i said about how to use the address; you are still doing what you did before clearly

copy and paste to location in clementine this address MINUS the word mplayer
[i have to write it LIKE THIS or it messes the link in this forum TRUST ME ON THAT!]

1. COPY all of this line minus the word mplayer

mplayer http://http-live.sr.se/p1-aac-192

2. OPEN CLEMENTINE / PLAYLIST/add stream/paste the address above [without the word mplayer]





PEACE! Shan

[Azyx]

Azyx i do not understand what you wrote

read again carefully what i said about how to use the address; you are still doing what you did before clearly

copy and paste to location in clementine this address MINUS the word mplayer
[i have to write it LIKE THIS or it messes the link in this forum TRUST ME ON THAT!]

1. COPY all of this line minus the word mplayer

mplayer http://http-live.sr.se/p1-aac-1922. OPEN CLEMENTINE / PLAYLIST/add stream/paste the address above [without the word mplayer]

PEACE! Shan

Offcourse I have done just that your described! I doesen't matter if I add the m3u-file OR Playlist-->Add stream, the results are the same.

I have 2 shreen-shots as proof, but I don't know how or If I can upload theme here....

[sudodus]

[i have to write it LIKE THIS or it messes the link in this forum TRUST ME ON THAT!]

Try ... :-)

http://http-live.sr.se/p1-aac-192

[Azyx]

Azyx i do not understand what you wrote

PEACE! Shan

I open clementine via terminal, to get error-message, when I add:

http://http-live.sr.se/p1-aac-192
in the Playlist-->Add stream... popup-window. The error-message I show before appear inte the terminal.

Do you understand now?

/Cheers

[shantiq]

Try ... :-)

http://http-live.sr.se/p1-aac-192


thanx for that... never knew you could do this



so Azyx my last offer


1. open clementine
2. go Playlist/Add stream and paste this [not the link you have used before/that does not work] just this link from this page please try it


http://http-live.sr.se/p1-aac-192


see if any good...

[Azyx]

thanx for that... never knew you could do this



so Azyx my last offer


1. open clementine
2. go Playlist/Add stream and paste this [not the link you have used before/that does not work] just this link from this page please try it




see if any good...

No. same error with http://http-live.sr.se/p1-aac-192 as with 96..


Decoding of AAC stream by FFMPEG failed."
15:22:10.376 WARN GstEngine:585 Gstreamer error: "Could not decode stream."
15:22:10.787 ERROR GstEnginePipeline:506 21 "gstffmpegdec.c(2215): gst_ffmpegdec_audio_frame (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-280/GstDecodeBin2:decodebin220/ffdec_aac:ffdec_aac20:
Decoding of AAC stream by FFMPEG failed."
15:22:10.789 WARN GstEngine:585 Gstreamer error: "Could not decode stream."
15:22:11.377 ERROR GstEnginePipeline:506 22 "gstffmpegdec.c(2215): gst_ffmpegdec_audio_frame (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-294/GstDecodeBin2:decodebin221/ffdec_aac:ffdec_aac21:
Decoding of AAC stream by FFMPEG failed."
15:22:11.382 ERROR GstEnginePipeline:506 22 "gstbasesrc.c(2625): gst_base_src_loop (): /GstPipeline:pipeline/GstURIDecodeBin:uridecodebin-294/GstSoupHTTPSrc:source:
streaming task paused, reason error (-5)"

[BicyclerBoy]

Both those streams work okay here with Clementine..
1.) 10.04.3 LTS 64 bit clememtine 1.1 gstreamer-0.10-ffmpeg 0.10.11.1~ppa1~lucid1 universe.
2.) 12.04 LTS 32bit clementine 1.1.1 gstreamer-0.10-ffmpeg 0.10.13-4

Do you have multiverse & universe repositories enabled (in synaptic) ?
Have you installed "ubuntu-restricted-extras" ?

It's a bit silly using 192KHz sample rate for an internet talk show..

[Azyx]

Both those streams work okay here with Clementine..
1.) 10.04.3 LTS 64 bit clememtine 1.1 gstreamer-0.10-ffmpeg 0.10.11.1~ppa1~lucid1 universe.
2.) 12.04 LTS 32bit clementine 1.1.1 gstreamer-0.10-ffmpeg 0.10.13-4

Do you have multiverse & universe repositories enabled (in synaptic) ?
Have you installed "ubuntu-restricted-extras" ?

It's a bit silly using 192KHz sample rate for an internet talk show..

Thanx. I did not have that, only ubuntu-restricted-addons, but it did not help :( Will test more tomorrow.

Yes 96kHz work fine for talk :) I also have slow adsl..

/Cheers

[BicyclerBoy]

You could try David Sansome's clementine ppa..

The gstreamer-ffmpeg dynamically loads other ffmpeg/libav system libraries.
(static build of it is 29MB.

So check you have the unstripped "extras" versions of the system avlibs..

[shantiq]

----------

[BicyclerBoy]

The errors that OP has are in gstreamer-ffmpeg..this is dynamically linked to system libav* libraries.
So it matters which versions they are.

It does not use ffmpeg directly & ffmpeg does not need to be installed.
And owing to the unfortunate choice by Ubuntu to use LibAV project over ffmpeg; the system libav*s are now derived from LibAV.

[Azyx]

I find the missing package :)
It was:


gstreamer0.10-plugins-bad

:) Not the -good and the -ugly are enoght. I think, anyway it worked after installation of that :)

/Cheers and thank for all help

[BicyclerBoy]

Sorry. should have suggested good,bad & the ugly..
Not the same movie with just the two..