sasun
December 16th, 2012, 04:51 AM
Hey there,
I have the same issue. Unfortunately I am stuck after adding the "Windows 7" entry manually in grub2. I tried to transfer the information from the old grub to grub2 to. When booting to the new entry it says "A Disk Read Error Occured. Press CTRL+ALT+DEL to restart".
Here is the output of Boot Info Script:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 10 for /boot/burg.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: BootPart in the file
/NST/nst_grub-B37489B4E124952936FEBDF6152C3D7E.mbr is
trying to chainload sector #108888633 on boot drive #1
BootPart in the file /NST/nst_grub.mbr is trying to
chainload sector #108888633 on boot drive #1 Grub2
(v1.97-1.98) in the file
/NST/nst_linux-54B4BE5375A3074F2DB3F7260753D0F0.mbr
looks at sector 480550744 of the same hard drive for
core.img, but core.img can not be found at this
location. Grub2 (v1.97-1.98) in the file
/NST/nst_linux.mbr looks at sector 114155673 of the
same hard drive for core.img. core.img is at this
location and looks in partition 8 for /boot/grub.
Operating System:
Boot files: /boot.ini /bootmgr /Boot/BCD /ntldr /NTDETECT.COM
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 1825. But according to the info from fdisk,
sda5 starts at sector 31344640.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sda7 and looks at sector 114155673 of the same hard
drive for core.img. core.img is at this location and
looks in partition 8 for /boot/grub.
Operating System: Linux Mint 8 Helena - Main
Edition
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda8: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda9: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda10: __________________________________________________ _______________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of
sda10 and looks at sector 469358072 of the same hard
drive for core.img. core.img is at this location and
looks for (,msdos10)/boot/grub on this drive.
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /boot/burg/burg.cfg /etc/fstab
/boot/grub/core.img /boot/burg/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 208,844 208,782 de Dell Utility
/dev/sda2 * 208,845 31,342,814 31,133,970 7 NTFS / exFAT / HPFS
/dev/sda3 31,344,638 488,396,799 457,052,162 5 Extended
/dev/sda5 31,344,640 92,786,687 61,442,048 7 NTFS / exFAT / HPFS
/dev/sda6 92,788,736 96,987,135 4,198,400 82 Linux swap / Solaris
/dev/sda7 96,989,184 117,966,847 20,977,664 83 Linux
/dev/sda8 117,968,896 151,121,919 33,153,024 83 Linux
/dev/sda9 151,123,968 467,423,231 316,299,264 7 NTFS / exFAT / HPFS
/dev/sda10 467,425,280 488,396,799 20,971,520 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 07D8-071F vfat DellUtility
/dev/sda10 edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ext4
/dev/sda2 5A046FE6046FC41B ntfs osX
/dev/sda5 64A402BEA40292AA ntfs os7
/dev/sda6 c49fd303-037b-4d06-a2c1-2e6ada5e0084 swap
/dev/sda7 43cc7f5a-544e-4f5c-bae8-05688955183f ext4
/dev/sda8 df93be26-4372-4202-8754-43041e31c9e4 ext4
/dev/sda9 04701C5900C4E601 ntfs data
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda10 / ext4 (rw,errors=remount-ro)
/dev/sda2 /mnt/2 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 /mnt/3 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda8 /home ext4 (rw)
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
;
;Warning: Boot.ini is used on Windows XP and earlier operating systems.
;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.
;
[boot loader]
timeout=15
default=multi(0)disk(0)rdisk(0)partition(2)\WINXP
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINXP="Windows XP on D:\" /FASTDETECT
--------------------------------------------------------------------------------
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda8)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro single quiet
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set 5a046fe6046fc41b
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda8 during installation
UUID=43cc7f5a-544e-4f5c-bae8-05688955183f / ext4 errors=remount-ro 0 1
# /home was on /dev/sda9 during installation
UUID=df93be26-4372-4202-8754-43041e31c9e4 /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=c49fd303-037b-4d06-a2c1-2e6ada5e0084 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
48.759593964 = 52.355215360 boot/grub/core.img 1
46.374877930 = 49.794646016 boot/grub/grub.cfg 1
49.490074158 = 53.139562496 boot/initrd.img-2.6.31-14-generic 2
48.618858337 = 52.204101632 boot/vmlinuz-2.6.31-14-generic 1
49.490074158 = 53.139562496 initrd.img 2
48.618858337 = 52.204101632 vmlinuz 1
========================== sda10/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_os-prober_proxy ###
menuentry "Windows 7 Professional (sda5)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 64A402BEA40292AA
chainloader +1
}
menuentry "Windows XP Professional (sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 5A046FE6046FC41B
chainloader +1
}
### END /etc/grub.d/00_os-prober_proxy ###
### BEGIN /etc/grub.d/12_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
if loadfont /boot/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/12_header ###
### BEGIN /etc/grub.d/13_debian_theme ###
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
insmod jpeg
if background_image /boot/grub/.background_cache.jpeg; then
set color_normal=black/black
set color_highlight=white/black
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/13_debian_theme ###
### BEGIN /etc/grub.d/14_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry "Ubuntu Precise Pengolin" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
menuentry "Ubuntu Precise Pengolin - Recovery Mode" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
echo 'Loading Linux precise ...'
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
### END /etc/grub.d/14_linux_proxy ###
### BEGIN /etc/grub.d/15_linux_xen ###
### END /etc/grub.d/15_linux_xen ###
### BEGIN /etc/grub.d/17_os-prober_proxy ###
menuentry "Linux Mint 8 Helena" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena - Recovery Mode" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro single quiet
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/17_os-prober_proxy ###
### BEGIN /etc/grub.d/18_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 64A402BEA40292AA
chainloader +1
}
### END /etc/grub.d/18_custom ###
### BEGIN /etc/grub.d/19_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/19_custom ###
--------------------------------------------------------------------------------
========================== sda10/boot/burg/burg.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/burg-mkconfig using templates
# from /etc/burg.d and settings from /etc/default/burg
#
### BEGIN /etc/burg.d/00_header ###
set theme_name=ubuntu
set gfxmode=640x480
if [ -s $prefix/burgenv ]; then
load_env
fi
set default="4"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function select_menu {
if menu_popup -t template_popup theme_menu ; then
free_config template_popup template_subitem menu class screen
load_config ${prefix}/themes/${theme_name}/theme ${prefix}/themes/custom/theme_${theme_name}
save_env theme_name
menu_refresh
fi
}
function toggle_fold {
if test -z $theme_fold ; then
set theme_fold=1
else
set theme_fold=
fi
save_env theme_fold
menu_refresh
}
function select_resolution {
if menu_popup -t template_popup resolution_menu ; then
menu_reload_mode
save_env gfxmode
fi
}
if test -f ${prefix}/themes/${theme_name}/theme ; then
insmod coreui
menu_region.text
load_string '+theme_menu { -arabic_and_freedom { command="set theme_name=arabic_and_freedom" }}'
load_string '+theme_menu { -black_and_white { command="set theme_name=black_and_white" }}'
load_string '+theme_menu { -burg { command="set theme_name=burg" }}'
load_string '+theme_menu { -chiva { command="set theme_name=chiva" }}'
load_string '+theme_menu { -coffee { command="set theme_name=coffee" }}'
load_string '+theme_menu { -lightness { command="set theme_name=lightness" }}'
load_string '+theme_menu { -minimum { command="set theme_name=minimum" }}'
load_string '+theme_menu { -proto { command="set theme_name=proto" }}'
load_string '+theme_menu { -radiance { command="set theme_name=radiance" }}'
load_string '+theme_menu { -radiancetext { command="set theme_name=radiancetext" }}'
load_string '+theme_menu { -refit { command="set theme_name=refit" }}'
load_string '+theme_menu { -sora { command="set theme_name=sora" }}'
load_string '+theme_menu { -sora_clean { command="set theme_name=sora_clean" }}'
load_string '+theme_menu { -sora_extended { command="set theme_name=sora_extended" }}'
load_string '+theme_menu { -ubuntu { command="set theme_name=ubuntu" }}'
load_string '+theme_menu { -ubuntu2 { command="set theme_name=ubuntu2" }}'
load_string '+theme_menu { -winter { command="set theme_name=winter" }}'
load_config ${prefix}/themes/conf.d/10_hotkey
load_config ${prefix}/themes/${theme_name}/theme ${prefix}/themes/custom/theme_${theme_name}
insmod vbe
insmod png
insmod jpeg
set gfxfont="Unifont Regular 16"
menu_region.gfx
vmenu resolution_menu
controller.ext
fi
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
set locale_dir=($root)/boot/burg/locale
set lang=en
insmod gettext
set timeout=5
### END /etc/burg.d/00_header ###
### BEGIN /etc/burg.d/10_linux ###
menuentry 'Precise Pengolin' --class ubuntu --class gnu-linux --class gnu --class os --group group_main {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
echo 'Loading Linux 3.2.0-34-generic-pae ...'
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
### END /etc/burg.d/10_linux ###
### BEGIN /etc/burg.d/30_os-prober ###
menuentry "XP" --class windows --class os {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 5a046fe6046fc41b
chainloader +1
}
menuentry "7" --class windows --class os {
insmod ntfs
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 64a402bea40292aa
chainloader +1
}
menuentry "Helena" --class linuxmint --class os --group group_/dev/sda7 {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/burg.d/30_os-prober ###
### BEGIN /etc/burg.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/burg.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda10/etc/fstab: ===============================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda10 during installation
UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda8 during installation
UUID=df93be26-4372-4202-8754-43041e31c9e4 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=c49fd303-037b-4d06-a2c1-2e6ada5e0084 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda10: Location of files loaded by Grub: ===================
GiB - GB File Fragment(s)
223.746589661 = 240.246071296 boot/burg/burg.cfg 1
229.026649475 = 245.915492352 boot/burg/core.img 1
223.807395935 = 240.311361536 boot/grub/core.img 1
223.638286591 = 240.129781760 boot/grub/grub.cfg 1
226.984870911 = 243.723149312 boot/initrd.img-3.2.0-34-generic-pae 2
224.574008942 = 241.134505984 boot/vmlinuz-3.2.0-34-generic-pae 2
226.984870911 = 243.723149312 initrd.img 2
224.574008942 = 241.134505984 vmlinuz 2
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
Could you help me out please?
Thanks in advance,
sasun
I have the same issue. Unfortunately I am stuck after adding the "Windows 7" entry manually in grub2. I tried to transfer the information from the old grub to grub2 to. When booting to the new entry it says "A Disk Read Error Occured. Press CTRL+ALT+DEL to restart".
Here is the output of Boot Info Script:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 10 for /boot/burg.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: BootPart in the file
/NST/nst_grub-B37489B4E124952936FEBDF6152C3D7E.mbr is
trying to chainload sector #108888633 on boot drive #1
BootPart in the file /NST/nst_grub.mbr is trying to
chainload sector #108888633 on boot drive #1 Grub2
(v1.97-1.98) in the file
/NST/nst_linux-54B4BE5375A3074F2DB3F7260753D0F0.mbr
looks at sector 480550744 of the same hard drive for
core.img, but core.img can not be found at this
location. Grub2 (v1.97-1.98) in the file
/NST/nst_linux.mbr looks at sector 114155673 of the
same hard drive for core.img. core.img is at this
location and looks in partition 8 for /boot/grub.
Operating System:
Boot files: /boot.ini /bootmgr /Boot/BCD /ntldr /NTDETECT.COM
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 1825. But according to the info from fdisk,
sda5 starts at sector 31344640.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: Grub2 (v1.97-1.98)
Boot sector info: Grub2 (v1.97-1.98) is installed in the boot sector of
sda7 and looks at sector 114155673 of the same hard
drive for core.img. core.img is at this location and
looks in partition 8 for /boot/grub.
Operating System: Linux Mint 8 Helena - Main
Edition
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda8: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda9: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda10: __________________________________________________ _______________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of
sda10 and looks at sector 469358072 of the same hard
drive for core.img. core.img is at this location and
looks for (,msdos10)/boot/grub on this drive.
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /boot/burg/burg.cfg /etc/fstab
/boot/grub/core.img /boot/burg/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 208,844 208,782 de Dell Utility
/dev/sda2 * 208,845 31,342,814 31,133,970 7 NTFS / exFAT / HPFS
/dev/sda3 31,344,638 488,396,799 457,052,162 5 Extended
/dev/sda5 31,344,640 92,786,687 61,442,048 7 NTFS / exFAT / HPFS
/dev/sda6 92,788,736 96,987,135 4,198,400 82 Linux swap / Solaris
/dev/sda7 96,989,184 117,966,847 20,977,664 83 Linux
/dev/sda8 117,968,896 151,121,919 33,153,024 83 Linux
/dev/sda9 151,123,968 467,423,231 316,299,264 7 NTFS / exFAT / HPFS
/dev/sda10 467,425,280 488,396,799 20,971,520 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 07D8-071F vfat DellUtility
/dev/sda10 edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ext4
/dev/sda2 5A046FE6046FC41B ntfs osX
/dev/sda5 64A402BEA40292AA ntfs os7
/dev/sda6 c49fd303-037b-4d06-a2c1-2e6ada5e0084 swap
/dev/sda7 43cc7f5a-544e-4f5c-bae8-05688955183f ext4
/dev/sda8 df93be26-4372-4202-8754-43041e31c9e4 ext4
/dev/sda9 04701C5900C4E601 ntfs data
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda10 / ext4 (rw,errors=remount-ro)
/dev/sda2 /mnt/2 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 /mnt/3 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda8 /home ext4 (rw)
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
;
;Warning: Boot.ini is used on Windows XP and earlier operating systems.
;Warning: Use BCDEDIT.exe to modify Windows Vista boot options.
;
[boot loader]
timeout=15
default=multi(0)disk(0)rdisk(0)partition(2)\WINXP
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINXP="Windows XP on D:\" /FASTDETECT
--------------------------------------------------------------------------------
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda8)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,8)
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro single quiet
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set 5a046fe6046fc41b
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda8 during installation
UUID=43cc7f5a-544e-4f5c-bae8-05688955183f / ext4 errors=remount-ro 0 1
# /home was on /dev/sda9 during installation
UUID=df93be26-4372-4202-8754-43041e31c9e4 /home ext4 defaults 0 2
# swap was on /dev/sda7 during installation
UUID=c49fd303-037b-4d06-a2c1-2e6ada5e0084 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
48.759593964 = 52.355215360 boot/grub/core.img 1
46.374877930 = 49.794646016 boot/grub/grub.cfg 1
49.490074158 = 53.139562496 boot/initrd.img-2.6.31-14-generic 2
48.618858337 = 52.204101632 boot/vmlinuz-2.6.31-14-generic 1
49.490074158 = 53.139562496 initrd.img 2
48.618858337 = 52.204101632 vmlinuz 1
========================== sda10/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_os-prober_proxy ###
menuentry "Windows 7 Professional (sda5)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 64A402BEA40292AA
chainloader +1
}
menuentry "Windows XP Professional (sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 5A046FE6046FC41B
chainloader +1
}
### END /etc/grub.d/00_os-prober_proxy ###
### BEGIN /etc/grub.d/12_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
if loadfont /boot/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/12_header ###
### BEGIN /etc/grub.d/13_debian_theme ###
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
insmod jpeg
if background_image /boot/grub/.background_cache.jpeg; then
set color_normal=black/black
set color_highlight=white/black
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/13_debian_theme ###
### BEGIN /etc/grub.d/14_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry "Ubuntu Precise Pengolin" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
menuentry "Ubuntu Precise Pengolin - Recovery Mode" --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set=root edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
echo 'Loading Linux precise ...'
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
### END /etc/grub.d/14_linux_proxy ###
### BEGIN /etc/grub.d/15_linux_xen ###
### END /etc/grub.d/15_linux_xen ###
### BEGIN /etc/grub.d/17_os-prober_proxy ###
menuentry "Linux Mint 8 Helena" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena - Recovery Mode" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set=root 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro single quiet
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/17_os-prober_proxy ###
### BEGIN /etc/grub.d/18_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos5)'
search --no-floppy --fs-uuid --set=root 64A402BEA40292AA
chainloader +1
}
### END /etc/grub.d/18_custom ###
### BEGIN /etc/grub.d/19_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/19_custom ###
--------------------------------------------------------------------------------
========================== sda10/boot/burg/burg.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/burg-mkconfig using templates
# from /etc/burg.d and settings from /etc/default/burg
#
### BEGIN /etc/burg.d/00_header ###
set theme_name=ubuntu
set gfxmode=640x480
if [ -s $prefix/burgenv ]; then
load_env
fi
set default="4"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function select_menu {
if menu_popup -t template_popup theme_menu ; then
free_config template_popup template_subitem menu class screen
load_config ${prefix}/themes/${theme_name}/theme ${prefix}/themes/custom/theme_${theme_name}
save_env theme_name
menu_refresh
fi
}
function toggle_fold {
if test -z $theme_fold ; then
set theme_fold=1
else
set theme_fold=
fi
save_env theme_fold
menu_refresh
}
function select_resolution {
if menu_popup -t template_popup resolution_menu ; then
menu_reload_mode
save_env gfxmode
fi
}
if test -f ${prefix}/themes/${theme_name}/theme ; then
insmod coreui
menu_region.text
load_string '+theme_menu { -arabic_and_freedom { command="set theme_name=arabic_and_freedom" }}'
load_string '+theme_menu { -black_and_white { command="set theme_name=black_and_white" }}'
load_string '+theme_menu { -burg { command="set theme_name=burg" }}'
load_string '+theme_menu { -chiva { command="set theme_name=chiva" }}'
load_string '+theme_menu { -coffee { command="set theme_name=coffee" }}'
load_string '+theme_menu { -lightness { command="set theme_name=lightness" }}'
load_string '+theme_menu { -minimum { command="set theme_name=minimum" }}'
load_string '+theme_menu { -proto { command="set theme_name=proto" }}'
load_string '+theme_menu { -radiance { command="set theme_name=radiance" }}'
load_string '+theme_menu { -radiancetext { command="set theme_name=radiancetext" }}'
load_string '+theme_menu { -refit { command="set theme_name=refit" }}'
load_string '+theme_menu { -sora { command="set theme_name=sora" }}'
load_string '+theme_menu { -sora_clean { command="set theme_name=sora_clean" }}'
load_string '+theme_menu { -sora_extended { command="set theme_name=sora_extended" }}'
load_string '+theme_menu { -ubuntu { command="set theme_name=ubuntu" }}'
load_string '+theme_menu { -ubuntu2 { command="set theme_name=ubuntu2" }}'
load_string '+theme_menu { -winter { command="set theme_name=winter" }}'
load_config ${prefix}/themes/conf.d/10_hotkey
load_config ${prefix}/themes/${theme_name}/theme ${prefix}/themes/custom/theme_${theme_name}
insmod vbe
insmod png
insmod jpeg
set gfxfont="Unifont Regular 16"
menu_region.gfx
vmenu resolution_menu
controller.ext
fi
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
set locale_dir=($root)/boot/burg/locale
set lang=en
insmod gettext
set timeout=5
### END /etc/burg.d/00_header ###
### BEGIN /etc/burg.d/10_linux ###
menuentry 'Precise Pengolin' --class ubuntu --class gnu-linux --class gnu --class os --group group_main {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set edb8a5ad-35d7-41d0-89c7-ad8b7ae95045
echo 'Loading Linux 3.2.0-34-generic-pae ...'
linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 ro quiet splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-34-generic-pae
}
### END /etc/burg.d/10_linux ###
### BEGIN /etc/burg.d/30_os-prober ###
menuentry "XP" --class windows --class os {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 5a046fe6046fc41b
chainloader +1
}
menuentry "7" --class windows --class os {
insmod ntfs
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 64a402bea40292aa
chainloader +1
}
menuentry "Helena" --class linuxmint --class os --group group_/dev/sda7 {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 43cc7f5a-544e-4f5c-bae8-05688955183f
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=43cc7f5a-544e-4f5c-bae8-05688955183f ro quiet quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/burg.d/30_os-prober ###
### BEGIN /etc/burg.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/burg.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda10/etc/fstab: ===============================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda10 during installation
UUID=edb8a5ad-35d7-41d0-89c7-ad8b7ae95045 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda8 during installation
UUID=df93be26-4372-4202-8754-43041e31c9e4 /home ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=c49fd303-037b-4d06-a2c1-2e6ada5e0084 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda10: Location of files loaded by Grub: ===================
GiB - GB File Fragment(s)
223.746589661 = 240.246071296 boot/burg/burg.cfg 1
229.026649475 = 245.915492352 boot/burg/core.img 1
223.807395935 = 240.311361536 boot/grub/core.img 1
223.638286591 = 240.129781760 boot/grub/grub.cfg 1
226.984870911 = 243.723149312 boot/initrd.img-3.2.0-34-generic-pae 2
224.574008942 = 241.134505984 boot/vmlinuz-3.2.0-34-generic-pae 2
226.984870911 = 243.723149312 initrd.img 2
224.574008942 = 241.134505984 vmlinuz 2
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
Could you help me out please?
Thanks in advance,
sasun