ca_20gti
October 10th, 2012, 02:47 AM
Hi everyone...
Sorry you have to see another initramfs issue but I have one which I have been working on for a week and tried several things that helped others including the
"If the “apt-get upgrade” does not successfully complete then a flag is set and update-initramfs does not get to run, hence grub gets all messed up. You should be able to boot using the old kernel and then run the sudo update-initramfs –u -k command. Then run sudo dpkg –reconfigure. That should clear the upgrade flags and fix any broken packages."
I did have ubuntu 12.04 installed (upgraded from 10.04) and was having some issues so I reinstalled clean and since then I have been pulling my hair out trying to find the issue.
It will hang on the purple screen.. however if I turn off the "splash" option in grub it will show the problem. It will drop to (initramfs) but I can hit ctrl-D and it will finally boot up. I can also hit Ctrl-D when the purple screen is up .. I just need to wait a few minutes after bios post.
This install was done by the live CD..
Seems everything is fine until.....
[ 6.464023] ata1: link is slow to respond, please be patient (ready=0)
[ 11.000021] ata1: SRST failed (errno=-16)
[ 16.508021] ata1: link is slow to respond, please be patient (ready=0)
[ 21.044021] ata1: SRST failed (errno=-16)
[ 26.552021] ata1: link is slow to respond, please be patient (ready=0)
[ 51.024038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 51.878306] ata1.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 51.878310] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 51.893022] ata1.00: configured for UDMA/133
[ 51.893194] scsi 0:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ
: 0 ANSI: 5
Gave up waiting for root device. Common problems:
ALERT! /dev/disk/by-uuid/bunch of stuff does not exist. Dropping to a shell!
BusyBox v1.13.3 ...
(initramfs)
Thank you for your help.
Output of the boot script
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid c3ca07d4-cab3-4a23-bd7b-cf15fe0120b7 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 1,953,523,711 1,953,521,664 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 1,465,144,064 1,465,144,002 83 Linux
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 146.8 GB, 146815737856 bytes
255 heads, 63 sectors/track, 17849 cylinders, total 286749488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 269,973,503 269,971,456 83 Linux
/dev/sdc2 269,975,550 286,748,671 16,773,122 5 Extended
/dev/sdc5 269,975,552 286,748,671 16,773,120 82 Linux swap / Solaris
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 300.0 GB, 300000000000 bytes
255 heads, 63 sectors/track, 36472 cylinders, total 585937500 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 63 585,922,679 585,922,617 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 fbd8fae6-18de-42e3-b11e-67ed091000a4 ext4 Minerva
/dev/sdb1 6c0255e2-2f97-4b6b-a723-94c1f6f75ab2 ext4 Drive-Y
/dev/sdc1 106e677b-ef40-42f5-b967-69035452de38 ext4
/dev/sdc5 6fd2047b-1b1a-4f26-ac8b-a0edc5d3209a swap
/dev/sdd1 df3ee783-0191-4afb-a708-8ae4c1c206f2 ext4 Drive6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdc1 / ext4 (rw,errors=remount-ro)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
echo 'Loading Linux 3.2.0-31-generic ...'
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-31-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc1 during installation
UUID=106e677b-ef40-42f5-b967-69035452de38 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=74eb35d5-fc76-4275-95b1-f7e8dbabfc9c none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
36.233379364 = 38.905294848 boot/grub/core.img 1
36.233386993 = 38.905303040 boot/grub/grub.cfg 1
27.761825562 = 29.809033216 boot/initrd.img-3.2.0-29-generic 2
1.011283875 = 1.085857792 boot/initrd.img-3.2.0-31-generic 2
36.188037872 = 38.856609792 boot/vmlinuz-3.2.0-29-generic 1
0.743881226 = 0.798736384 boot/vmlinuz-3.2.0-31-generic 1
1.011283875 = 1.085857792 initrd.img 2
27.761825562 = 29.809033216 initrd.img.old 2
0.743881226 = 0.798736384 vmlinuz 1
36.188037872 = 38.856609792 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 ca b4 89 09 08 0e 91 26 4b 48 51 23 5c 08 c7 21 |.......&KHQ#\..!|
00000010 23 12 21 82 25 33 01 57 c2 14 40 0c 70 d3 2a ad |#.!.%3.W..@.p.*.|
00000020 4c 39 2b 92 37 48 94 9e 3e 70 d3 26 19 1b d2 75 |L9+.7H..>p.&...u|
00000030 53 e5 01 7c 03 de 2e 9a 1a 42 6c 12 04 b8 09 42 |S..|.....Bl....B|
00000040 6b 55 89 8e 82 68 0e ea 2a 79 c3 6a 10 34 07 7b |kU...h..*y.j.4.{|
00000050 51 a2 1c 7f d6 12 6b f5 20 02 f8 d3 53 dd 9c 2a |Q.....k. ...S..*|
00000060 e5 e0 1a 2a b7 1a 7b 8f e5 25 25 55 ce 29 55 c9 |...*..{..%%U.)U.|
00000070 4c ac be d2 d5 2d 44 c1 7a 46 9e 49 99 d9 22 b3 |L....-D.zF.I..".|
00000080 71 47 21 21 44 89 8d 52 25 cc 00 dd 68 24 12 87 |qG!!D..R%...h$..|
00000090 25 94 c4 6b 52 5a 23 73 5c 1b 23 d4 05 e9 0c cd |%..kRZ#s\.#.....|
000000a0 a0 7d d2 5c 61 aa 01 20 91 74 50 cc f6 65 30 3d |.}.\a.. .tP..e0=|
000000b0 b3 41 ba 08 05 c7 10 68 00 31 b5 de 0c 34 d5 a2 |.A.....h.1...4..|
000000c0 e9 ea cd a9 d2 16 52 35 39 a4 71 d5 4d b2 76 5e |......R59.q.M.v^|
000000d0 df 6b 31 bb 86 b4 5e b8 d3 89 a6 1e 46 3d 7a e4 |.k1...^.....F=z.|
000000e0 f9 eb b4 9b 45 a7 06 03 6f 02 e2 a0 24 f1 53 82 |....E...o...$.S.|
000000f0 47 37 b3 94 77 fa 4e 1e 4d 0e a6 19 c8 89 7c 23 |G7..w.N.M.....|#|
00000100 ce 49 f4 3d 77 62 0b 88 84 a2 e0 87 18 ba e1 99 |.I.=wb..........|
00000110 df 32 75 9b 73 00 09 89 a7 8c e2 ec e0 ca ab 03 |.2u.s...........|
00000120 2e db 47 38 4d 7e c9 e1 05 5c 93 6a a2 42 c1 a0 |..G8M~...\.j.B..|
00000130 3a 4a 80 8f e7 13 25 d7 5f 50 3b d6 8b df 54 c4 |:J....%._P;...T.|
00000140 75 5f b2 36 a5 a0 c7 66 a9 1d fa 7b 7e 92 2e a5 |u_.6...f...{~...|
00000150 59 10 72 81 df ee 2a ba b0 04 ee c7 8d 03 4a 1e |Y.r...*.......J.|
00000160 e0 2a 86 35 e5 18 5a 27 04 af b6 05 bd 41 41 26 |.*.5..Z'.....AA&|
00000170 66 b1 2a c6 8e 8b 91 6d da 24 92 4a 8c 33 43 05 |f.*....m.$.J.3C.|
00000180 ae 4d 75 f5 62 3e cd c6 28 68 50 15 5d 48 15 e4 |.Mu.b>..(hP.]H..|
00000190 56 d7 03 ec 59 73 88 53 3d 22 42 7e 30 af 71 53 |V...Ys.S="B~0.qS|
000001a0 56 24 13 91 69 f5 c0 0a 9a 67 e2 30 94 6f a5 fd |V$..i....g.0.o..|
000001b0 a7 27 b3 5f b8 15 a0 ab 8e 94 79 fc a2 52 00 fe |.'._......y..R..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 f0 ff 00 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt
Sorry you have to see another initramfs issue but I have one which I have been working on for a week and tried several things that helped others including the
"If the “apt-get upgrade” does not successfully complete then a flag is set and update-initramfs does not get to run, hence grub gets all messed up. You should be able to boot using the old kernel and then run the sudo update-initramfs –u -k command. Then run sudo dpkg –reconfigure. That should clear the upgrade flags and fix any broken packages."
I did have ubuntu 12.04 installed (upgraded from 10.04) and was having some issues so I reinstalled clean and since then I have been pulling my hair out trying to find the issue.
It will hang on the purple screen.. however if I turn off the "splash" option in grub it will show the problem. It will drop to (initramfs) but I can hit ctrl-D and it will finally boot up. I can also hit Ctrl-D when the purple screen is up .. I just need to wait a few minutes after bios post.
This install was done by the live CD..
Seems everything is fine until.....
[ 6.464023] ata1: link is slow to respond, please be patient (ready=0)
[ 11.000021] ata1: SRST failed (errno=-16)
[ 16.508021] ata1: link is slow to respond, please be patient (ready=0)
[ 21.044021] ata1: SRST failed (errno=-16)
[ 26.552021] ata1: link is slow to respond, please be patient (ready=0)
[ 51.024038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 51.878306] ata1.00: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
[ 51.878310] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 51.893022] ata1.00: configured for UDMA/133
[ 51.893194] scsi 0:0:0:0: Direct-Access ATA WDC WD10EACS-00Z 01.0 PQ
: 0 ANSI: 5
Gave up waiting for root device. Common problems:
ALERT! /dev/disk/by-uuid/bunch of stuff does not exist. Dropping to a shell!
BusyBox v1.13.3 ...
(initramfs)
Thank you for your help.
Output of the boot script
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdd and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid c3ca07d4-cab3-4a23-bd7b-cf15fe0120b7 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 1,953,523,711 1,953,521,664 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 1,465,144,064 1,465,144,002 83 Linux
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 146.8 GB, 146815737856 bytes
255 heads, 63 sectors/track, 17849 cylinders, total 286749488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 269,973,503 269,971,456 83 Linux
/dev/sdc2 269,975,550 286,748,671 16,773,122 5 Extended
/dev/sdc5 269,975,552 286,748,671 16,773,120 82 Linux swap / Solaris
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 300.0 GB, 300000000000 bytes
255 heads, 63 sectors/track, 36472 cylinders, total 585937500 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 63 585,922,679 585,922,617 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 fbd8fae6-18de-42e3-b11e-67ed091000a4 ext4 Minerva
/dev/sdb1 6c0255e2-2f97-4b6b-a723-94c1f6f75ab2 ext4 Drive-Y
/dev/sdc1 106e677b-ef40-42f5-b967-69035452de38 ext4
/dev/sdc5 6fd2047b-1b1a-4f26-ac8b-a0edc5d3209a swap
/dev/sdd1 df3ee783-0191-4afb-a708-8ae4c1c206f2 ext4 Drive6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdc1 / ext4 (rw,errors=remount-ro)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
echo 'Loading Linux 3.2.0-31-generic ...'
linux /boot/vmlinuz-3.2.0-31-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-31-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=106e677b-ef40-42f5-b967-69035452de38 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 106e677b-ef40-42f5-b967-69035452de38
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc1 during installation
UUID=106e677b-ef40-42f5-b967-69035452de38 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=74eb35d5-fc76-4275-95b1-f7e8dbabfc9c none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
36.233379364 = 38.905294848 boot/grub/core.img 1
36.233386993 = 38.905303040 boot/grub/grub.cfg 1
27.761825562 = 29.809033216 boot/initrd.img-3.2.0-29-generic 2
1.011283875 = 1.085857792 boot/initrd.img-3.2.0-31-generic 2
36.188037872 = 38.856609792 boot/vmlinuz-3.2.0-29-generic 1
0.743881226 = 0.798736384 boot/vmlinuz-3.2.0-31-generic 1
1.011283875 = 1.085857792 initrd.img 2
27.761825562 = 29.809033216 initrd.img.old 2
0.743881226 = 0.798736384 vmlinuz 1
36.188037872 = 38.856609792 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 ca b4 89 09 08 0e 91 26 4b 48 51 23 5c 08 c7 21 |.......&KHQ#\..!|
00000010 23 12 21 82 25 33 01 57 c2 14 40 0c 70 d3 2a ad |#.!.%3.W..@.p.*.|
00000020 4c 39 2b 92 37 48 94 9e 3e 70 d3 26 19 1b d2 75 |L9+.7H..>p.&...u|
00000030 53 e5 01 7c 03 de 2e 9a 1a 42 6c 12 04 b8 09 42 |S..|.....Bl....B|
00000040 6b 55 89 8e 82 68 0e ea 2a 79 c3 6a 10 34 07 7b |kU...h..*y.j.4.{|
00000050 51 a2 1c 7f d6 12 6b f5 20 02 f8 d3 53 dd 9c 2a |Q.....k. ...S..*|
00000060 e5 e0 1a 2a b7 1a 7b 8f e5 25 25 55 ce 29 55 c9 |...*..{..%%U.)U.|
00000070 4c ac be d2 d5 2d 44 c1 7a 46 9e 49 99 d9 22 b3 |L....-D.zF.I..".|
00000080 71 47 21 21 44 89 8d 52 25 cc 00 dd 68 24 12 87 |qG!!D..R%...h$..|
00000090 25 94 c4 6b 52 5a 23 73 5c 1b 23 d4 05 e9 0c cd |%..kRZ#s\.#.....|
000000a0 a0 7d d2 5c 61 aa 01 20 91 74 50 cc f6 65 30 3d |.}.\a.. .tP..e0=|
000000b0 b3 41 ba 08 05 c7 10 68 00 31 b5 de 0c 34 d5 a2 |.A.....h.1...4..|
000000c0 e9 ea cd a9 d2 16 52 35 39 a4 71 d5 4d b2 76 5e |......R59.q.M.v^|
000000d0 df 6b 31 bb 86 b4 5e b8 d3 89 a6 1e 46 3d 7a e4 |.k1...^.....F=z.|
000000e0 f9 eb b4 9b 45 a7 06 03 6f 02 e2 a0 24 f1 53 82 |....E...o...$.S.|
000000f0 47 37 b3 94 77 fa 4e 1e 4d 0e a6 19 c8 89 7c 23 |G7..w.N.M.....|#|
00000100 ce 49 f4 3d 77 62 0b 88 84 a2 e0 87 18 ba e1 99 |.I.=wb..........|
00000110 df 32 75 9b 73 00 09 89 a7 8c e2 ec e0 ca ab 03 |.2u.s...........|
00000120 2e db 47 38 4d 7e c9 e1 05 5c 93 6a a2 42 c1 a0 |..G8M~...\.j.B..|
00000130 3a 4a 80 8f e7 13 25 d7 5f 50 3b d6 8b df 54 c4 |:J....%._P;...T.|
00000140 75 5f b2 36 a5 a0 c7 66 a9 1d fa 7b 7e 92 2e a5 |u_.6...f...{~...|
00000150 59 10 72 81 df ee 2a ba b0 04 ee c7 8d 03 4a 1e |Y.r...*.......J.|
00000160 e0 2a 86 35 e5 18 5a 27 04 af b6 05 bd 41 41 26 |.*.5..Z'.....AA&|
00000170 66 b1 2a c6 8e 8b 91 6d da 24 92 4a 8c 33 43 05 |f.*....m.$.J.3C.|
00000180 ae 4d 75 f5 62 3e cd c6 28 68 50 15 5d 48 15 e4 |.Mu.b>..(hP.]H..|
00000190 56 d7 03 ec 59 73 88 53 3d 22 42 7e 30 af 71 53 |V...Ys.S="B~0.qS|
000001a0 56 24 13 91 69 f5 c0 0a 9a 67 e2 30 94 6f a5 fd |V$..i....g.0.o..|
000001b0 a7 27 b3 5f b8 15 a0 ab 8e 94 79 fc a2 52 00 fe |.'._......y..R..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 f0 ff 00 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
xz: (stdin): Compressed data is corrupt