pepelemalin51
September 29th, 2012, 11:15 AM
Hello,
Everything is in the title :)
I read other threads and could see that people provide the result of this boot infoscript
So there is mine:
Thank you in advance for your help :)
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Dell Utility: FAT16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1285304 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 81,920 175,363,994 175,282,075 7 NTFS / exFAT / HPFS
/dev/sda3 175,364,094 312,580,095 137,216,002 5 Extended
/dev/sda5 310,507,520 312,580,095 2,072,576 82 Linux swap / Solaris
/dev/sda6 175,364,096 310,507,519 135,143,424 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 976,773,167 976,773,105 7 NTFS / exFAT / HPFS
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 1011 MB, 1011220480 bytes
249 heads, 32 sectors/track, 247 cylinders, total 1975040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 32 1,975,039 1,975,008 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 3030-3030 vfat DellUtility
/dev/sda2 B8B85C53B85C11EC ntfs OS
/dev/sda5 04bcdbf1-23ee-4fda-ab01-deb171f31b98 swap
/dev/sda6 5477dee7-a9fa-40e3-8eea-e60f039ea487 ext4
/dev/sdb1 C08A221E8A221208 ntfs
/dev/sdc1 FCB3-0EEC vfat PHILIPS
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/C08A221E8A221208 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
/dev/sdc1 /media/PHILIPS vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect /noguiboot
--------------------------------------------------------------------------------
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-31-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux /boot/vmlinuz-3.2.0-31-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-31-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
echo 'Loading Linux 3.2.0-31-generic-pae ...'
linux /boot/vmlinuz-3.2.0-31-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-31-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root B8B85C53B85C11EC
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=04bcdbf1-23ee-4fda-ab01-deb171f31b98 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-29-generic-pae 2
= boot/initrd.img-3.2.0-31-generic-pae 1
= boot/vmlinuz-3.2.0-29-generic-pae 1
= boot/vmlinuz-3.2.0-31-generic-pae 2
= initrd.img 1
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 1
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
000001b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 20 0e 08 00 a0 1f 00 00 fe |....... ........|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 20 0e 08 00 00 |........... ....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/bruno/Downloads/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
Any idea is welcomed.
Bru
Everything is in the title :)
I read other threads and could see that people provide the result of this boot infoscript
So there is mine:
Thank you in advance for your help :)
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Dell Utility: FAT16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1285304 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 81,920 175,363,994 175,282,075 7 NTFS / exFAT / HPFS
/dev/sda3 175,364,094 312,580,095 137,216,002 5 Extended
/dev/sda5 310,507,520 312,580,095 2,072,576 82 Linux swap / Solaris
/dev/sda6 175,364,096 310,507,519 135,143,424 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 976,773,167 976,773,105 7 NTFS / exFAT / HPFS
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 1011 MB, 1011220480 bytes
249 heads, 32 sectors/track, 247 cylinders, total 1975040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 32 1,975,039 1,975,008 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 3030-3030 vfat DellUtility
/dev/sda2 B8B85C53B85C11EC ntfs OS
/dev/sda5 04bcdbf1-23ee-4fda-ab01-deb171f31b98 swap
/dev/sda6 5477dee7-a9fa-40e3-8eea-e60f039ea487 ext4
/dev/sdb1 C08A221E8A221208 ntfs
/dev/sdc1 FCB3-0EEC vfat PHILIPS
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda6 / ext4 (rw,errors=remount-ro)
/dev/sdb1 /media/C08A221E8A221208 fuseblk (rw,nosuid,nodev,allow_other,default_permissions,b lksize=4096)
/dev/sdc1 /media/PHILIPS vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
================================ sda2/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect /noguiboot
--------------------------------------------------------------------------------
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-31-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux /boot/vmlinuz-3.2.0-31-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-31-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-31-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
echo 'Loading Linux 3.2.0-31-generic-pae ...'
linux /boot/vmlinuz-3.2.0-31-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-31-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 5477dee7-a9fa-40e3-8eea-e60f039ea487
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root B8B85C53B85C11EC
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=5477dee7-a9fa-40e3-8eea-e60f039ea487 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=04bcdbf1-23ee-4fda-ab01-deb171f31b98 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-29-generic-pae 2
= boot/initrd.img-3.2.0-31-generic-pae 1
= boot/vmlinuz-3.2.0-29-generic-pae 1
= boot/vmlinuz-3.2.0-31-generic-pae 2
= initrd.img 1
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 1
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda3
00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
000001b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 20 0e 08 00 a0 1f 00 00 fe |....... ........|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 20 0e 08 00 00 |........... ....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/bruno/Downloads/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
Any idea is welcomed.
Bru