m-tee
August 27th, 2012, 12:59 PM
Hello,
I have a working dual-boot setup through GRUB2 of Windows 8 and Ubuntu 12.04.
I have an SSD with a single windows partition (sda) and a HDD with shared NTFS and ext4 with Ubuntu (sdb),
I have attached bootinfoscript with details to my setup.
How I'd like it to be:
sda: windows and its boot record.
sdb: ubuntu and its boot record.
And i can switch between them upon booting by pressing F12 and choosing which device i'd like to boot from.
Is it possible? Should i just run fixmbr over the first drive and then install grub to the second? How do i do that?
It is working the way it is by now, but i think this tweak would speed up loading of windows a bit.
here is my bootinfoscript log:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Lilo is installed in the MBR of /dev/sda.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 2dc6d648-4283-4b3b-99a2-ba1c42d16de0 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grub/grub.cfg /bootmgr /Boot/BCD
sdb2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb7: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 64.0 GB, 64023257088 bytes
255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 125,044,735 125,042,688 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sdb2 206,848 862,081,023 861,874,176 7 NTFS / exFAT / HPFS
/dev/sdb3 862,083,070 976,771,071 114,688,002 5 Extended
/dev/sdb5 862,083,072 932,800,511 70,717,440 83 Linux
/dev/sdb6 967,008,256 976,771,071 9,762,816 82 Linux swap / Solaris
/dev/sdb7 932,802,560 967,006,207 34,203,648 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 8ADAF878DAF861BD ntfs
/dev/sdb1 AADEB7DFDEB7A1CD ntfs System-reserviert
/dev/sdb2 765A80675A802649 ntfs Volume
/dev/sdb5 068a9c9b-f10f-4fb3-92ae-1f1965b9fbd7 ext4
/dev/sdb6 429edf54-51e5-49c9-a634-785e6369d075 swap
/dev/sdb7 2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb5 /home ext4 (rw)
/dev/sdb7 / ext4 (rw,errors=remount-ro)
============================= sdb1/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="5"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
true
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? grub/grub.cfg 1
=========================== sdb7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="5"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-27-generic ...'
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-26-generic ...'
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-25-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-25-generic ...'
linux /boot/vmlinuz-3.2.0-25-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-24-generic ...'
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root AADEB7DFDEB7A1CD
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=068a9c9b-f10f-4fb3-92ae-1f1965b9fbd7 /home ext4 defaults 0 2
# swap was on /dev/sdb6 during installation
UUID=429edf54-51e5-49c9-a634-785e6369d075 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 2
= boot/initrd.img-3.2.0-24-generic 2
= boot/initrd.img-3.2.0-25-generic 2
= boot/initrd.img-3.2.0-26-generic 1
= boot/initrd.img-3.2.0-27-generic 2
= boot/initrd.img-3.2.0-29-generic 2
= boot/vmlinuz-3.2.0-23-generic 1
= boot/vmlinuz-3.2.0-24-generic 1
= boot/vmlinuz-3.2.0-25-generic 2
= boot/vmlinuz-3.2.0-26-generic 1
= boot/vmlinuz-3.2.0-27-generic 1
= boot/vmlinuz-3.2.0-29-generic 2
= initrd.img 2
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 1
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
I have a working dual-boot setup through GRUB2 of Windows 8 and Ubuntu 12.04.
I have an SSD with a single windows partition (sda) and a HDD with shared NTFS and ext4 with Ubuntu (sdb),
I have attached bootinfoscript with details to my setup.
How I'd like it to be:
sda: windows and its boot record.
sdb: ubuntu and its boot record.
And i can switch between them upon booting by pressing F12 and choosing which device i'd like to boot from.
Is it possible? Should i just run fixmbr over the first drive and then install grub to the second? How do i do that?
It is working the way it is by now, but i think this tweak would speed up loading of windows a bit.
here is my bootinfoscript log:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Lilo is installed in the MBR of /dev/sda.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 2dc6d648-4283-4b3b-99a2-ba1c42d16de0 root
set prefix=($root)/boot/grub
---------------------------------------------------------------------------
-----.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /Windows/System32/winload.exe
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grub/grub.cfg /bootmgr /Boot/BCD
sdb2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb3: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb7: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 64.0 GB, 64023257088 bytes
255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 125,044,735 125,042,688 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sdb2 206,848 862,081,023 861,874,176 7 NTFS / exFAT / HPFS
/dev/sdb3 862,083,070 976,771,071 114,688,002 5 Extended
/dev/sdb5 862,083,072 932,800,511 70,717,440 83 Linux
/dev/sdb6 967,008,256 976,771,071 9,762,816 82 Linux swap / Solaris
/dev/sdb7 932,802,560 967,006,207 34,203,648 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 8ADAF878DAF861BD ntfs
/dev/sdb1 AADEB7DFDEB7A1CD ntfs System-reserviert
/dev/sdb2 765A80675A802649 ntfs Volume
/dev/sdb5 068a9c9b-f10f-4fb3-92ae-1f1965b9fbd7 ext4
/dev/sdb6 429edf54-51e5-49c9-a634-785e6369d075 swap
/dev/sdb7 2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb5 /home ext4 (rw)
/dev/sdb7 / ext4 (rw,errors=remount-ro)
============================= sdb1/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="5"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
true
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos7)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? grub/grub.cfg 1
=========================== sdb7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="5"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-27-generic ...'
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-26-generic ...'
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-25-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-25-generic ...'
linux /boot/vmlinuz-3.2.0-25-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-25-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-24-generic ...'
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 2dc6d648-4283-4b3b-99a2-ba1c42d16de0
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set=root AADEB7DFDEB7A1CD
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=2dc6d648-4283-4b3b-99a2-ba1c42d16de0 / ext4 errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=068a9c9b-f10f-4fb3-92ae-1f1965b9fbd7 /home ext4 defaults 0 2
# swap was on /dev/sdb6 during installation
UUID=429edf54-51e5-49c9-a634-785e6369d075 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 2
= boot/initrd.img-3.2.0-24-generic 2
= boot/initrd.img-3.2.0-25-generic 2
= boot/initrd.img-3.2.0-26-generic 1
= boot/initrd.img-3.2.0-27-generic 2
= boot/initrd.img-3.2.0-29-generic 2
= boot/vmlinuz-3.2.0-23-generic 1
= boot/vmlinuz-3.2.0-24-generic 1
= boot/vmlinuz-3.2.0-25-generic 2
= boot/vmlinuz-3.2.0-26-generic 1
= boot/vmlinuz-3.2.0-27-generic 1
= boot/vmlinuz-3.2.0-29-generic 2
= initrd.img 2
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 1
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in