talaus
August 4th, 2012, 01:32 PM
Hi All,
I have a computer with a RAID0 setup (2 HDDs), which previously had ArchLinux on it (not functional anymore) and stores important data. I want to install Ubuntu instead, and to keep my data in place. I really have no idea how to do it, and some reference/help would be great.
Partition table:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 192779 96358+ 83 Linux
/dev/sda2 192780 4192964 2000092+ fd Linux raid autodetect
/dev/sda3 4192965 1953520064 974663550 fd Linux raid autodetect
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 63 192779 96358+ 83 Linux
/dev/sdb2 192780 4192964 2000092+ fd Linux raid autodetect
/dev/sdb3 4192965 1953520064 974663550 fd Linux raid autodetect
sdX2 was used as swap and sdX3 stores my data.
Again, any kind of help will be greatly appreciated. Thanks!
I have a computer with a RAID0 setup (2 HDDs), which previously had ArchLinux on it (not functional anymore) and stores important data. I want to install Ubuntu instead, and to keep my data in place. I really have no idea how to do it, and some reference/help would be great.
Partition table:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 63 192779 96358+ 83 Linux
/dev/sda2 192780 4192964 2000092+ fd Linux raid autodetect
/dev/sda3 4192965 1953520064 974663550 fd Linux raid autodetect
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 63 192779 96358+ 83 Linux
/dev/sdb2 192780 4192964 2000092+ fd Linux raid autodetect
/dev/sdb3 4192965 1953520064 974663550 fd Linux raid autodetect
sdX2 was used as swap and sdX3 stores my data.
Again, any kind of help will be greatly appreciated. Thanks!