PDA

View Full Version : [SOLVED] InstallerCD only sees my external hard drive



Yankees1327
June 11th, 2012, 03:13 AM
I downloaded Ubuntu 12.04 x64 and burned the .iso to a DVD. When I boot from the DVD, it takes me to the installer but when I click on install, then it only shows my Western Digital MyBook which is a USB external hard drive that I only use for backups and do not intend to install Ubuntu on. I have two internal hard drives, neither of which it recognizes. One is a Seagate Barracuda 1TB which I have Windows 7 installed on, and the other is a Western Digital Caviar Blue 500GB on which I want to install Ubuntu. Both are sata 6.0gb/s, if that helps.

Also, here is the data from the bootinfoscript I ran:

Boot Info Script 0.61 [1 April 2012]


============================= Boot Info Summary: ===============================

=> Windows is installed in the MBR of /dev/sda.

sda1: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 1000.2 GB, 1000170586112 bytes
255 heads, 63 sectors/track, 121597 cylinders, total 1953458176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 2,048 1,953,458,175 1,953,456,128 7 NTFS / exFAT / HPFS


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/sda1 B640F12640F0EDCD ntfs My Book
/dev/sr0 iso9660 Ubuntu 12.04 LTS amd64

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)


My system specs:
ASRock H61iCafe Motherboard
Intel i5 2400 @3.1 GHz Processor
8GB DDR3 Memory
XFX Radeon HD 6870 2GB Video Card
Ultra x4 600 Watt PSU
HT|Omega Claro Sound Card
The two hard drives I listed
and a regular HP DVD Writer which I am using to run the installation CD.

Operating systems are Windows 7 Ultimate x64 and hopefully soon to be Ubuntu 12.04 x64.

darkod
June 11th, 2012, 09:29 AM
Looks like they are not even detected. If you have SATA ports from two different controllers on the board, try connecting the disk(s) to different controller, or ports.

You can even try SATA 2 ports just to see if they will get recognized.

There is no setting like RAID or similar enabled in bios?

Mark Phelps
June 11th, 2012, 05:47 PM
Some motherboards have the SATA ports divided so that some are 3 gb/s, others are 6 gb/s. Try hooking up ONLY the drive that you want to install Ubuntu to, to the 3 gb/s SATA ports (all other hard drives disconnected) and see if the installer sees it then.

You may have to run Ubuntu at the slow data rate.

oldfred
June 11th, 2012, 06:19 PM
If using a hard drive, there is no performance loss using SATA2. Only fast SSDs may need the advantages of SATA3.

http://en.wikipedia.org/wiki/Serial_ATA
SATA revision 2.0 (SATA 3 Gbit/s)
SATA revision 3.0 (SATA 6 Gbit/s)
All SATA data cables meeting the SATA spec are rated for 3.0 Gbit/s and will handle current mechanical drives without any loss of sustained and burst data transfer performance. However, high-performance flash drives exceed the SATA 3 Gbit/s transfer rate; this is addressed with the SATA 6 Gbit/s interoperability standard.

Yankees1327
June 11th, 2012, 08:48 PM
Yep, changing to SATA2 made it recognize the hard drive. Thanks guys. Marking as solved.