snaponit
May 30th, 2012, 11:19 PM
I installed linux mint 12 LXDE on a Dell Inspiron 2650 using a USB flash drive (also had a broken cd drive, so had to load plop boot manager on a floppy to tell it to look at USB).
It loaded as long as I put the option acpi=off in the boot options.
Then I installed, restarted the laptop and it's just a black screen.
Then I installed lubuntu 12.04 without removing mint, restart still black screen.
Thanks for any help with this craziness. Forgive me if it's simple, I'm a bit new to Linux.
Here are the results from bootinfoscript:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 12 LXDE
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1415272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1415272 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders, total 39070080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 21,220,633 21,218,586 83 Linux
/dev/sda2 21,221,374 39,069,695 17,848,322 5 Extended
/dev/sda5 38,025,216 39,069,695 1,044,480 82 Linux swap / Solaris
/dev/sda6 21,221,376 38,025,215 16,803,840 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 2030 MB, 2030043136 bytes
255 heads, 63 sectors/track, 246 cylinders, total 3964928 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 3,964,927 3,964,865 b W95 FAT32
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 2122 MB, 2122579968 bytes
2 heads, 63 sectors/track, 32902 cylinders, total 4145664 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 32 4,145,663 4,145,632 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 562defbf-a0f9-43a1-9480-2ac9e42304bc ext4
/dev/sda5 e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 swap
/dev/sda6 6c36da6d-e2e2-4121-934e-6f44059ea8aa ext4
/dev/sdb1 7C92-16C1 vfat MYLINUXLIVE
/dev/sdc1 2816-4BA1 vfat MYLINUXLIVE
/dev/zram0 90736599-fccd-41c5-b5d4-baac53d3049e swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1 /media/MYLINUXLIVE vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,d mask=0077,utf8=1,showexec,flush,uhelper=udisks)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= initrd.img 1
= vmlinuz 1
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) -- recovery mode (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 3
= boot/vmlinuz-3.2.0-23-generic 1
= initrd.img 3
= vmlinuz 1
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 af c3 02 5c 66 20 0f b6 7c 24 22 40 01 74 24 2a |...\f ..|$"@.t$*|
00000010 1e c0 05 84 e4 02 60 60 01 85 00 4e 0b 60 3b c3 |......``...N.`;.|
00000020 17 00 31 10 48 80 34 1e 10 8b 5c 24 34 42 18 02 |..1.H.4...\$4B..|
00000030 8b 0c 20 8b 33 db 8a dd 40 21 78 80 20 fb 01 0f |.. .3...@!x. ...|
00000040 84 b2 20 0a 66 3b 90 fe 0f 85 d2 00 01 f6 c2 20 |.. .f;......... |
00000050 02 46 e1 00 01 e0 0d 5c 33 c9 40 3b 0f 09 00 19 |.F.....\3.@;....|
00000060 6c 4a c0 15 6c 0f 84 09 01 01 0b 44 24 60 3b c1 |lJ..l......D$`;.|
00000070 0f 85 e2 0a 61 01 74 24 18 20 79 01 29 80 68 01 |....a.t$. y.).h.|
00000080 a1 7c 83 c6 02 83 c5 02 49 8c 48 89 20 03 c0 1c |.|......I.H. ...|
00000090 10 89 8c c2 2c 02 89 a4 11 f9 85 ff 0f 84 1f 17 |....,...........|
000000a0 81 1d 03 02 21 17 10 c1 01 54 24 38 00 8b 74 24 |....!....T$8..t$|
000000b0 10 33 c9 8b 42 8a 08 00 0e 18 41 2c 66 8b 0a c1 |.3..B.....A,f...|
000000c0 2d a2 16 41 2d 4c 24 30 c1 2d e9 60 0a 20 20 23 |-..A-L$0.-.`. #|
000000d0 c1 e9 8c c0 85 85 ff 1c 75 30 80 0f a1 0e 60 2e |........u0....`.|
000000e0 84 df 03 04 00 00 40 02 1d 8d 4c 24 64 26 bf 01 |......@...L$d&..|
000000f0 61 00 1c 18 66 60 3a 64 20 08 00 89 bc a2 10 eb |a...f`:d .......|
00000100 81 8d 44 14 24 68 61 02 68 60 02 44 24 10 26 c7 |..D.$ha.h`.D$.&.|
00000110 a3 10 a1 05 e9 62 21 8a 44 24 0a 5c 01 28 55 20 |.....b!.D$.\.(U |
00000120 02 f6 44 24 23 30 c0 0f 84 4a 40 01 20 13 38 8b |..D$#0...J@. .8.|
00000130 92 46 c1 2f 85 b7 60 46 8b 4c a0 1e 02 84 22 0a |.F./..`F.L....".|
00000140 33 db 33 d2 48 74 20 0b 48 0f 85 de 00 03 66 8b |3.3.Ht .H.....f.|
00000150 00 51 02 8b 76 18 66 8b 09 40 33 c0 66 8b 46 04 |.Q..v.f..@3.f.F.|
00000160 a1 1b fe 01 e1 02 39 4e 06 76 06 83 c6 50 10 48 |......9N.v...P.H|
00000170 75 f4 61 02 ea 64 02 0f 04 85 e0 21 01 3b 56 0c |u.a..d.....!.;V.|
00000180 0f 82 c2 d6 23 01 0e 0f 87 cc 20 01 40 0c 02 38 |....#..... .@..8|
00000190 62 08 08 8b 49 1c 8d 3c 2a c1 62 01 0a 61 07 ae |b...I..<*.b..a..|
000001a0 e1 04 39 17 41 c0 09 c7 08 48 75 f5 41 02 9b 11 |..9.A....Hu.A...|
000001b0 43 02 0f 85 92 01 01 8b 4f 02 00 66 85 c9 00 fe |C.......O..f....|
000001c0 ff ff 82 fe ff ff 02 68 00 01 00 f0 0f 00 00 fe |.......h........|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 68 00 01 00 00 |...........h....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
It loaded as long as I put the option acpi=off in the boot options.
Then I installed, restarted the laptop and it's just a black screen.
Then I installed lubuntu 12.04 without removing mint, restart still black screen.
Thanks for any help with this craziness. Forgive me if it's simple, I'm a bit new to Linux.
Here are the results from bootinfoscript:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 12 LXDE
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1415272 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 1415272 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders, total 39070080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 21,220,633 21,218,586 83 Linux
/dev/sda2 21,221,374 39,069,695 17,848,322 5 Extended
/dev/sda5 38,025,216 39,069,695 1,044,480 82 Linux swap / Solaris
/dev/sda6 21,221,376 38,025,215 16,803,840 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 2030 MB, 2030043136 bytes
255 heads, 63 sectors/track, 246 cylinders, total 3964928 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 3,964,927 3,964,865 b W95 FAT32
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 2122 MB, 2122579968 bytes
2 heads, 63 sectors/track, 32902 cylinders, total 4145664 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 32 4,145,663 4,145,632 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 562defbf-a0f9-43a1-9480-2ac9e42304bc ext4
/dev/sda5 e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 swap
/dev/sda6 6c36da6d-e2e2-4121-934e-6f44059ea8aa ext4
/dev/sdb1 7C92-16C1 vfat MYLINUXLIVE
/dev/sdc1 2816-4BA1 vfat MYLINUXLIVE
/dev/zram0 90736599-fccd-41c5-b5d4-baac53d3049e swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdc1 /media/MYLINUXLIVE vfat (rw,nosuid,nodev,uid=999,gid=999,shortname=mixed,d mask=0077,utf8=1,showexec,flush,uhelper=udisks)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 0,0,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= initrd.img 1
= vmlinuz 1
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root 6c36da6d-e2e2-4121-934e-6f44059ea8aa
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry "Linux Mint 12 LXDE, 3.0.0-12-generic (/dev/sda1) -- recovery mode (on /dev/sda1)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 562defbf-a0f9-43a1-9480-2ac9e42304bc
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=562defbf-a0f9-43a1-9480-2ac9e42304bc ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=6c36da6d-e2e2-4121-934e-6f44059ea8aa / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e9ae1ee8-41a0-4ccb-a2fd-acadf537ec99 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 3
= boot/vmlinuz-3.2.0-23-generic 1
= initrd.img 3
= vmlinuz 1
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 af c3 02 5c 66 20 0f b6 7c 24 22 40 01 74 24 2a |...\f ..|$"@.t$*|
00000010 1e c0 05 84 e4 02 60 60 01 85 00 4e 0b 60 3b c3 |......``...N.`;.|
00000020 17 00 31 10 48 80 34 1e 10 8b 5c 24 34 42 18 02 |..1.H.4...\$4B..|
00000030 8b 0c 20 8b 33 db 8a dd 40 21 78 80 20 fb 01 0f |.. .3...@!x. ...|
00000040 84 b2 20 0a 66 3b 90 fe 0f 85 d2 00 01 f6 c2 20 |.. .f;......... |
00000050 02 46 e1 00 01 e0 0d 5c 33 c9 40 3b 0f 09 00 19 |.F.....\3.@;....|
00000060 6c 4a c0 15 6c 0f 84 09 01 01 0b 44 24 60 3b c1 |lJ..l......D$`;.|
00000070 0f 85 e2 0a 61 01 74 24 18 20 79 01 29 80 68 01 |....a.t$. y.).h.|
00000080 a1 7c 83 c6 02 83 c5 02 49 8c 48 89 20 03 c0 1c |.|......I.H. ...|
00000090 10 89 8c c2 2c 02 89 a4 11 f9 85 ff 0f 84 1f 17 |....,...........|
000000a0 81 1d 03 02 21 17 10 c1 01 54 24 38 00 8b 74 24 |....!....T$8..t$|
000000b0 10 33 c9 8b 42 8a 08 00 0e 18 41 2c 66 8b 0a c1 |.3..B.....A,f...|
000000c0 2d a2 16 41 2d 4c 24 30 c1 2d e9 60 0a 20 20 23 |-..A-L$0.-.`. #|
000000d0 c1 e9 8c c0 85 85 ff 1c 75 30 80 0f a1 0e 60 2e |........u0....`.|
000000e0 84 df 03 04 00 00 40 02 1d 8d 4c 24 64 26 bf 01 |......@...L$d&..|
000000f0 61 00 1c 18 66 60 3a 64 20 08 00 89 bc a2 10 eb |a...f`:d .......|
00000100 81 8d 44 14 24 68 61 02 68 60 02 44 24 10 26 c7 |..D.$ha.h`.D$.&.|
00000110 a3 10 a1 05 e9 62 21 8a 44 24 0a 5c 01 28 55 20 |.....b!.D$.\.(U |
00000120 02 f6 44 24 23 30 c0 0f 84 4a 40 01 20 13 38 8b |..D$#0...J@. .8.|
00000130 92 46 c1 2f 85 b7 60 46 8b 4c a0 1e 02 84 22 0a |.F./..`F.L....".|
00000140 33 db 33 d2 48 74 20 0b 48 0f 85 de 00 03 66 8b |3.3.Ht .H.....f.|
00000150 00 51 02 8b 76 18 66 8b 09 40 33 c0 66 8b 46 04 |.Q..v.f..@3.f.F.|
00000160 a1 1b fe 01 e1 02 39 4e 06 76 06 83 c6 50 10 48 |......9N.v...P.H|
00000170 75 f4 61 02 ea 64 02 0f 04 85 e0 21 01 3b 56 0c |u.a..d.....!.;V.|
00000180 0f 82 c2 d6 23 01 0e 0f 87 cc 20 01 40 0c 02 38 |....#..... .@..8|
00000190 62 08 08 8b 49 1c 8d 3c 2a c1 62 01 0a 61 07 ae |b...I..<*.b..a..|
000001a0 e1 04 39 17 41 c0 09 c7 08 48 75 f5 41 02 9b 11 |..9.A....Hu.A...|
000001b0 43 02 0f 85 92 01 01 8b 4f 02 00 66 85 c9 00 fe |C.......O..f....|
000001c0 ff ff 82 fe ff ff 02 68 00 01 00 f0 0f 00 00 fe |.......h........|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 68 00 01 00 00 |...........h....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected