FawnSpawn
May 8th, 2012, 08:51 PM
I have an Acer laptop with Windows Vista dual-booted with Ubuntu. I'm new to Ubuntu so am not sure how to fix the fact that it won't boot Windows Vista any more. I read on how to do the boot info script and to make a new post about it with my RESULTS.txt info. Well, here it is:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Acer PQService MBR is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr /ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda2/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 20,466,809 20,466,747 27 Hidden NTFS (Recovery Environment)
/dev/sda2 * 20,691,720 128,905,559 108,213,840 6 FAT16
/dev/sda3 128,921,625 135,026,324 6,104,700 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 4004 MB, 4004511744 bytes
116 heads, 51 sectors/track, 1322 cylinders, total 7821312 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 32 7,821,311 7,821,280 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 a136538f-f846-4f33-a7f3-1222ebb6240f ext4
/dev/sda1 EC581B19E49BED2A ntfs PQSERVICE
/dev/sda2 620C48720C484371 ntfs ACER
/dev/sda3 01CBEFB9D5449160 ntfs DATA
/dev/sdb1 28A6-F3CF vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sda2 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
/dev/sdb1 /media/28A6-F3CF vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
======================== sda2/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
DO NOT EDIT THIS FILE
It is automatically generated by grub-mkconfig using templates
from /etc/grub.d and settings from /etc/default/grub
BEGIN /etc/grub.d/00_header
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
END /etc/grub.d/00_header
BEGIN /etc/grub.d/05_debian_theme
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
END /etc/grub.d/05_debian_theme
BEGIN /etc/grub.d/10_linux
END /etc/grub.d/10_linux
BEGIN /etc/grub.d/10_lupin
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-19-generic ...'
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-19-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-17-generic ...'
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-16-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-16-generic ...'
linux /boot/vmlinuz-3.0.0-16-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-15-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-15-generic ...'
linux /boot/vmlinuz-3.0.0-15-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-14-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-14-generic ...'
linux /boot/vmlinuz-3.0.0-14-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-13-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-13-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-13-generic ...'
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
}
END /etc/grub.d/10_lupin
BEGIN /etc/grub.d/20_linux_xen
END /etc/grub.d/20_linux_xen
BEGIN /etc/grub.d/20_memtest86+
END /etc/grub.d/20_memtest86+
BEGIN /etc/grub.d/30_os-prober
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
END /etc/grub.d/30_os-prober
BEGIN /etc/grub.d/40_custom
This file provides an easy way to add custom menu entries. Simply type the
menu entries you want to add after this comment. Be careful not to change
the 'exec tail' line above.
END /etc/grub.d/40_custom
BEGIN /etc/grub.d/41_custom
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
END /etc/grub.d/41_custom
--------------------------------------------------------------------------------
============================= sda2/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
/etc/fstab: static file system information.
Use 'blkid -o value -s UUID' to print the universally unique identifier
for a device; this may be used with UUID= as a more robust way to name
devices that works even if disks are added and removed. See fstab(5).
<file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda2/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.38-11-generic 2
= boot/initrd.img-3.0.0-12-generic 2
= boot/initrd.img-3.0.0-13-generic 2
= boot/initrd.img-3.0.0-14-generic 3
= boot/initrd.img-3.0.0-15-generic 2
= boot/initrd.img-3.0.0-16-generic 3
= boot/initrd.img-3.0.0-17-generic 2
= boot/initrd.img-3.0.0-19-generic 2
= boot/vmlinuz-2.6.38-11-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-13-generic 2
= boot/vmlinuz-3.0.0-14-generic 2
= boot/vmlinuz-3.0.0-15-generic 1
= boot/vmlinuz-3.0.0-16-generic 2
= boot/vmlinuz-3.0.0-17-generic 2
= boot/vmlinuz-3.0.0-19-generic 2
= initrd.img 2
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 2
=============================== StdErr Messages: ===============================
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Sourcenet said something about clicking on hashtag things like there would be a problem with them so I edited them out of this post. Can someone point me in the direction of a fix for this dual-boot problem? Any help is appreciated. Thank you.
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Acer PQService MBR is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr /ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda2/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 20,466,809 20,466,747 27 Hidden NTFS (Recovery Environment)
/dev/sda2 * 20,691,720 128,905,559 108,213,840 6 FAT16
/dev/sda3 128,921,625 135,026,324 6,104,700 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 4004 MB, 4004511744 bytes
116 heads, 51 sectors/track, 1322 cylinders, total 7821312 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 32 7,821,311 7,821,280 b W95 FAT32
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 a136538f-f846-4f33-a7f3-1222ebb6240f ext4
/dev/sda1 EC581B19E49BED2A ntfs PQSERVICE
/dev/sda2 620C48720C484371 ntfs ACER
/dev/sda3 01CBEFB9D5449160 ntfs DATA
/dev/sdb1 28A6-F3CF vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sda2 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
/dev/sdb1 /media/28A6-F3CF vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed ,dmask=0077,utf8=1,showexec,flush,uhelper=udisks)
======================== sda2/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
DO NOT EDIT THIS FILE
It is automatically generated by grub-mkconfig using templates
from /etc/grub.d and settings from /etc/default/grub
BEGIN /etc/grub.d/00_header
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
END /etc/grub.d/00_header
BEGIN /etc/grub.d/05_debian_theme
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
END /etc/grub.d/05_debian_theme
BEGIN /etc/grub.d/10_linux
END /etc/grub.d/10_linux
BEGIN /etc/grub.d/10_lupin
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-19-generic ...'
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-19-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-17-generic ...'
linux /boot/vmlinuz-3.0.0-17-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-16-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-16-generic ...'
linux /boot/vmlinuz-3.0.0-16-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-16-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-15-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-15-generic ...'
linux /boot/vmlinuz-3.0.0-15-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-15-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-14-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-14-generic ...'
linux /boot/vmlinuz-3.0.0-14-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-14-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-13-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-13-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-13-generic ...'
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ntfs
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set=root 620C48720C484371
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=620C48720C484371 loop=/ubuntu/disks/root.disk ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
}
END /etc/grub.d/10_lupin
BEGIN /etc/grub.d/20_linux_xen
END /etc/grub.d/20_linux_xen
BEGIN /etc/grub.d/20_memtest86+
END /etc/grub.d/20_memtest86+
BEGIN /etc/grub.d/30_os-prober
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
END /etc/grub.d/30_os-prober
BEGIN /etc/grub.d/40_custom
This file provides an easy way to add custom menu entries. Simply type the
menu entries you want to add after this comment. Be careful not to change
the 'exec tail' line above.
END /etc/grub.d/40_custom
BEGIN /etc/grub.d/41_custom
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
END /etc/grub.d/41_custom
--------------------------------------------------------------------------------
============================= sda2/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
/etc/fstab: static file system information.
Use 'blkid -o value -s UUID' to print the universally unique identifier
for a device; this may be used with UUID= as a more robust way to name
devices that works even if disks are added and removed. See fstab(5).
<file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda2/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-2.6.38-11-generic 2
= boot/initrd.img-3.0.0-12-generic 2
= boot/initrd.img-3.0.0-13-generic 2
= boot/initrd.img-3.0.0-14-generic 3
= boot/initrd.img-3.0.0-15-generic 2
= boot/initrd.img-3.0.0-16-generic 3
= boot/initrd.img-3.0.0-17-generic 2
= boot/initrd.img-3.0.0-19-generic 2
= boot/vmlinuz-2.6.38-11-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-13-generic 2
= boot/vmlinuz-3.0.0-14-generic 2
= boot/vmlinuz-3.0.0-15-generic 1
= boot/vmlinuz-3.0.0-16-generic 2
= boot/vmlinuz-3.0.0-17-generic 2
= boot/vmlinuz-3.0.0-19-generic 2
= initrd.img 2
= initrd.img.old 2
= vmlinuz 2
= vmlinuz.old 2
=============================== StdErr Messages: ===============================
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Sourcenet said something about clicking on hashtag things like there would be a problem with them so I edited them out of this post. Can someone point me in the direction of a fix for this dual-boot problem? Any help is appreciated. Thank you.