PDA

View Full Version : [ubuntu] Serverupgrade ntpd Problem



hallo200
March 28th, 2012, 03:34 PM
Hallo Forum,

I have done a upgrade from 8.04 LTS to 10.04 LTS. Now i have in my logs the following entries:

Mar 28 09:09:46 server ntpd[1447]: kernel time sync status change 6001
Mar 28 12:17:32 server ntpd[1447]: kernel time sync status change 2001
Mar 28 13:42:58 server ntpd[1447]: kernel time sync status change 6001
Mar 28 14:00:04 server ntpd[1447]: kernel time sync status change 2001
Mar 28 14:34:13 server ntpd[1447]: kernel time sync status change 6001
Mar 28 15:59:37 server ntpd[1447]: kernel time sync status change 2001

The second Problem is that i have an Opteron CPU which becomes very hot. On Ubuntu 8.04 i had 55-60 Degree Celsius.

Now I have with "sensors" round 40 degrees.

My Mainboard is not officially supported.
It is only supported for Fedora 6, SLES 10.1, and one more.

Thanks for you opinion,
regards,
hallo200

hallo200
March 29th, 2012, 03:44 PM
Doest nobody know about this entires?

regards
hallo 200

Insomn1a
March 29th, 2012, 05:01 PM
Doest nobody know about this entires?

regards
hallo 200



Binary package hint: ntp

The logcheck filter shipped with ntp in karmic misses the following messages:

Mar 8 10:06:29 chunks ntpd[1000]: kernel time sync status change 6001
Mar 8 10:23:32 chunks ntpd[1000]: kernel time sync status change 2001

According to the NTP folks, these messages are expected behaviour (in a future version, they've eliminated the message):

*Source https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/568720


what kind of configuration do you have along with the opteron? is it 55-60 idle, full load? is the cpu constantly in use?

can you paste your processes list and sensor temps?

hallo200
March 29th, 2012, 09:21 PM
Hallo,

Thanks for reply.

There is no CPU load expect at night for backup. I got some error messages in the syslog saying the k8temp gives wrong values.

Now idle temparatur is around 40 degrees Celsius. Bevore the upgrade i had 50-60 degrees.

Thanks,
regards,
hallo 200

Insomn1a
March 30th, 2012, 09:48 PM
Hallo,

Thanks for reply.

There is no CPU load expect at night for backup. I got some error messages in the syslog saying the k8temp gives wrong values.

Now idle temparatur is around 40 degrees Celsius. Bevore the upgrade i had 50-60 degrees.

Thanks,
regards,
hallo 200

So long as the temps really aren't correct I would probably ignore those errors, if they are I would try installing a different tool to read those sensors.

This page has installation instructions for im-sensors

https://help.ubuntu.com/community/SensorInstallHowto

hallo200
March 31st, 2012, 01:07 AM
Thanks for reply,

i already use lm-sensors for the temperature output.

I read your link and i started sensors-detect on a desktop test machine.
Could it cause a server crash or something like that?

The questions make me a littel bit insecure - espacially:



If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

The script tells me to accept the default answers, but when I aswere with NO there will not be change right?

thanks and regards
hallo200

Insomn1a
April 2nd, 2012, 09:40 PM
Thanks for reply,

i already use lm-sensors for the temperature output.

I read your link and i started sensors-detect on a desktop test machine.
Could it cause a server crash or something like that?

The questions make me a littel bit insecure - espacially:


The script tells me to accept the default answers, but when I aswere with NO there will not be change right?

thanks and regards
hallo200

Im 99% sure that sensors-detect wont make a server crash, especially a linux machine. and yes you should just accept the default answers.

hallo200
April 4th, 2012, 03:25 PM
Hallo,

the CPU (Core 0, Core 1) are still to low.
whats this:

M/B Temp: -1.0C (high = -1.0C, hyst = -1.0C) ALARM sensor = diode
CPU Temp: +0.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = diode
temp3: +0.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = diode

completly strage values!



k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +39.0C
Core1 Temp: +38.0C

k8temp-pci-00cb
Adapter: PCI adapter
Core0 Temp: +42.0C
Core1 Temp: +44.0C

adt7463-i2c-0-2e
Adapter: SMBus nForce2 adapter at 4c00
V1.5: +2.53 V (min = +0.00 V, max = +3.32 V)
VCore: +0.01 V (min = +0.00 V, max = +2.99 V)
V3.3: +3.33 V (min = +0.00 V, max = +4.38 V)
V5: +0.00 V (min = +0.00 V, max = +6.64 V)
V12: +0.00 V (min = +0.00 V, max = +15.94 V)
CPU_Fan: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
CPU Temp: +45.0C (low = +55.0C, high = +65.0C) ALARM
Board Temp: +45.5C (low = +45.0C, high = +55.0C) ALARM
Remote Temp: +46.0C (low = +55.0C, high = +65.0C) ALARM
cpu0_vid: +0.000 V

w83627thf-isa-0a00
Adapter: ISA adapter
VCore: +1.94 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +15.50 V (min = +15.50 V, max = +15.50 V) ALARM
+3.3V: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM
+5V: +6.80 V (min = +6.80 V, max = +6.80 V) ALARM
-12V: +6.06 V (min = +6.06 V, max = +6.06 V) ALARM
V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM
VBat: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM
fan1: 0 RPM (min = 0 RPM, div = 128) ALARM
CPU Fan: 0 RPM (min = 0 RPM, div = 128) ALARM
fan3: 0 RPM (min = 0 RPM, div = 128) ALARM
M/B Temp: -1.0C (high = -1.0C, hyst = -1.0C) ALARM sensor = diode
CPU Temp: +0.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = diode
temp3: +0.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = diode
beep_enable:enabled

w83792d-i2c-0-2f
Adapter: SMBus nForce2 adapter at 4c00
VCoreA: +1.12 V (min = +1.65 V, max = +2.04 V) ALARM
VCoreB: +1.11 V (min = +1.65 V, max = +2.04 V) ALARM
VIN0: +3.32 V (min = +0.00 V, max = +4.08 V)
VIN1: +3.24 V (min = +0.00 V, max = +4.08 V)
VIN2: +1.84 V (min = +0.00 V, max = +4.08 V)
VIN3: +1.83 V (min = +0.00 V, max = +4.08 V)
5VCC: +5.06 V (min = +0.00 V, max = +6.12 V)
5VSB: +5.02 V (min = +0.00 V, max = +6.12 V)
VBAT: +3.04 V (min = +0.00 V, max = +4.08 V)
Fan1: 1562 RPM (min = 0 RPM, div = 8)
Fan2: 1298 RPM (min = 0 RPM, div = 8)
Fan3: 1278 RPM (min = 0 RPM, div = 8)
Fan4: 1520 RPM (min = 0 RPM, div = 8)
Fan5: 0 RPM (min = 0 RPM, div = 16)
Fan7: 1328 RPM (min = 0 RPM, div = 8)
Temp1: +42.0C (high = +127.0C, hyst = +0.0C)
Temp2: +43.0C (high = +80.0C, hyst = +75.0C)
Temp3: +41.0C (high = +80.0C, hyst = +75.0C)



I tried to remove w83627thf from /etc/modules and did:
service module-init-tools start
but if i execute
sensors it is still there


regards
hallo200

hallo200
April 4th, 2012, 03:42 PM
ok, I removed the module
w83627hf
with "modprobe -r w83627hf"

but the k8temps are still wrong!

Thanks, regards
hallo 200