PDA

View Full Version : [xubuntu] SD card reader R5C592 not working



pmurk
February 26th, 2012, 04:19 PM
Hallo,
did a fresh Xubuntu 11.10 installation on my Acer Aspire 7520G today.
So fare most thing are fine but the build in card reader does not work.

lspci -v output gives



01:04.0 Multimedia video controller: Ricoh Co Ltd Device 0032 (rev 05) (prog-if 10)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 80000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>

01:04.1 Unclassified device [0005]: Ricoh Co Ltd Device 0022 (rev 22)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 80000800 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: <access denied>

01:04.2 Unclassified device [0080]: Ricoh Co Ltd Device 0043 (rev 12)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 80000900 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: <access denied>

01:04.3 Unclassified device [0080]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 80000a00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
Kernel modules: r592

01:04.4 Unclassified device [0080]: Ricoh Co Ltd Device 0052 (rev 12)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 80000b00 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: <access denied>I have googled at lot but without success.
Any ideas?