PDA

View Full Version : [ubuntu] cpufreq wrong speed



qwertyjjj
February 14th, 2012, 06:35 PM
I just upgraded to Ocelot and suddenyl my CPU has been throttled to 600 instead of max 1.73GHz.
The governor lists performance but is not listing the corretc max speeds.
I tried setting the processor.ignore_ppc=1 in the grub but that has not helped.
ANy ideas how I can get this working?
The drive is also incorrect!

cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.00 ms.
hardware limits: 75.0 MHz - 600 MHz
available frequency steps: 75.0 MHz, 150 MHz, 225 MHz, 300 MHz, 375 MHz, 450 MHz, 525 MHz, 600 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 75.0 MHz and 600 MHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 600 MHz.
cpufreq stats: 75.0 MHz:0.00%, 150 MHz:0.00%, 225 MHz:0.00%, 300 MHz:0.00%, 375 MHz:0.00%, 450 MHz:0.00%, 525 MHz:0.00%, 600 MHz:100.00%

bluexrider
February 14th, 2012, 07:11 PM
I just upgraded to Ocelot and suddenyl my CPU has been throttled to 600 instead of max 1.73GHz.
The governor lists performance but is not listing the corretc max speeds.
I tried setting the processor.ignore_ppc=1 in the grub but that has not helped.
ANy ideas how I can get this working?
The drive is also incorrect!

cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: p4-clockmod
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.00 ms.
hardware limits: 75.0 MHz - 600 MHz
available frequency steps: 75.0 MHz, 150 MHz, 225 MHz, 300 MHz, 375 MHz, 450 MHz, 525 MHz, 600 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave, performance
current policy: frequency should be within 75.0 MHz and 600 MHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 600 MHz.
cpufreq stats: 75.0 MHz:0.00%, 150 MHz:0.00%, 225 MHz:0.00%, 300 MHz:0.00%, 375 MHz:0.00%, 450 MHz:0.00%, 525 MHz:0.00%, 600 MHz:100.00%
Find the correct driver. This one has its limitations as it states but you realize this already.
What were you using before?

BTW just because the driver: p4-clockmod is stating the processor speed incorrectly doesn't mean that the processor is truly running at that speed.

This may help diag the problem, post please


hwinfo --cpu

qwertyjjj
February 14th, 2012, 10:27 PM
No, it really is running slowly, everything is very sluggish.
I tried running sudo modprobe speedstep-smi but it didn't help, it didn;t change the driver in the cpufreq-info information either.

hwinfo --cpu
> hal.1: read hal dataprocess 3424: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
01: None 00.0: 10103 CPU
[Created at cpu.304]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "GenuineIntel"
Model: 6.13.8 "Intel(R) Pentium(R) M processor 1.73GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,m ca,cmov,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,p be,nx,up,bts,est,tm2
Clock: 600 MHz
BogoMips: 1595.82
Cache: 2048 kb
Config Status: cfg=new, avail=yes, need=no, active=unknown

Temüjin
February 14th, 2012, 10:40 PM
blacklist p4-clockmod?