Strange output when starting terminal

[AndyP79]

Hi Ya'll,
Okay, so when I open the terminal, I get this output first, but I still seem to be able to install and do things from the terminal, any ideas what this is and can I fix it?
Thanks

bash: /dev/sda1: Permission denied
No command 'proc' found, did you mean:
Command 'nproc' from package 'coreutils' (main)
Command 'proj' from package 'proj-bin' (universe)
proc: command not found
sysfs: command not found
fusectl: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'udev' found, did you mean:
Command 'udv' from package 'ncbi-tools-x11' (universe)
Command 'udav' from package 'udav' (universe)
Command 'udevd' from package 'udev' (main)
udev: command not found
devpts: command not found
No command 'tmpfs' found, did you mean:
Command 'mtpfs' from package 'mtpfs' (universe)
tmpfs: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
binfmt_misc: command not found
gvfs-fuse-daemon: command not found
bash: .: /etc/bash_completion.d/iftop: cannot execute binary file

[TeoBigusGeekus]

Check your ~/.bashrc file.

[AndyP79]

Check your ~/.bashrc file.

Cool..... uh.... sorry, but not sure where to find it, and when I do, what am I looking for?

[collisionystm]

Cool..... uh.... sorry, but not sure where to find it, and when I do, what am I looking for?

cat ~/.bashrc

post output

[Sempa]

Cool..... uh.... sorry, but not sure where to find it, and when I do, what am I looking for?
It's my understanding that the .bashrc file located in your home folder contains a lot of commands that are run automatically when an interactive bash shell is started.
You should probably be looking for lines containing proc, nproc, proj, and all the other commands that couldn't be found.

[bodhi.zazen]

cat ~/.bashrc

post output

can be simplified


cat ~/.bashrc | pastebinit

https://help.ubuntu.com/community/Pastebinit

May need to install pastebinit first


sudo apt-get install pastebinit

[jtarin]

Your .bash.rc file is a very simple file......offhand it would seem as if your $PATH variables are not set properly.Run and post the results of the command
echo $PATH

[AndyP79]

cat ~/.bashrc

post output


Okay, here is this one

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
[ -z "$PS1" ] && return

# don't put duplicate lines in the history. See bash(1) for more options
# ... or force ignoredups and ignorespace
HISTCONTROL=ignoredups:ignorespace

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# make less more friendly for non-text input files, see lesspipe(1)
[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the prompt below)
if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then
debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy prompt (non-color, unless we know we "want" color)
case "$TERM" in
xterm-color) color_prompt=yes;;
esac

# uncomment for a colored prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the prompt
#force_color_prompt=yes

if [ -n "$force_color_prompt" ]; then
if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
# We have color support; assume it's compliant with Ecma-48
# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
# a case would tend to support setf rather than setaf.)
color_prompt=yes
else
color_prompt=
fi
fi

if [ "$color_prompt" = yes ]; then
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_prompt force_color_prompt

# If this is an xterm set the title to user@host:dir
case "$TERM" in
xterm*|rxvt*)
PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
;;
*)
;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
alias ls='ls --color=auto'
#alias dir='dir --color=auto'
#alias vdir='vdir --color=auto'

alias grep='grep --color=auto'
alias fgrep='fgrep --color=auto'
alias egrep='egrep --color=auto'
fi

# some more ls aliases
alias ll='ls -alF'
alias la='ls -A'
alias l='ls -CF'

# Add an "alert" alias for long running commands. Use like so:
# sleep 10; alert
alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if [ -f /etc/bash_completion ] && ! shopt -oq posix; then
. /etc/bash_completion
fi

[AndyP79]

Your .bash.rc file is a very simple file......offhand it would seem as if your $PATH variables are not set properly.Run and post the results of the command
echo $PATH


And here is this one


/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games

[AndyP79]

By the way folks, I am using 11.10 32 bit on an amd64 bit machine, don't know if that matters or not?
Thanks for the help so far also:D

[bodhi.zazen]

so it is not your .bashrc, check the files you are sourcing

. ~/.bash_aliases

[collisionystm]

post the output of


ls /etc/bash_completion.d/


^ That is LS not is

[AndyP79]

so it is not your .bashrc, check the files you are sourcing

. ~/.bash_aliases

andrew@dirkpitt:~$ . ~/.bash_aliases
bash: /home/andrew/.bash_aliases: No such file or directory

[AndyP79]

post the output of


ls /etc/bash_completion.d/


^ That is LS not is

abook iconv povray
ant iftop procps
apache2ctl ifupdown python
apport_completion imagemagick qdbus
apt info qemu
apt-build initramfs-tools quota-tools
aptitude insserv rcs
aspell ipmitool rdesktop
autoconf iproute2 reportbug
automake ipsec resolvconf
autorpm iptables rfkill
axi-cache ipv6calc ri
bash-builtins isql rpcdebug
bind-utils jar rpm
bitkeeper java rpmcheck
bittorrent k3b rrdtool
bluez kldload rsync
brctl larch rtcwake
bzip2 ldapvi samba
cardctl lftp sbcl
cfengine libreoffice.sh screen
chkconfig lilo service
chsh links sh
cksfv lintian shadow
clisp lisp sitecopy
configure lrzip smartctl
coreutils lsof snownews
cowsay lvm sqlite3
cpan2dist lzma ssh
cpio lzop sshfs
crontab mailman strace
cryptsetup make svk
cups man sysbench
cvs mc sysctl
cvsps mcrypt sysv-rc
dd mdadm tar
debconf medusa tcpdump
desktop-file-validate minicom ufw
dhclient mkinitrd unace
dict module-init-tools unrar
dkms monodevelop update-alternatives
dpkg mount upstart
dselect mplayer util-linux
dsniff msynctool vncviewer
dvd+rw-tools munin-node vpnc
e2fsprogs mutt wireless-tools
findutils mysqladmin wodim
freeciv ncftp wol
freerdp net-tools ***
fuse nmap wvdial
gcc ntpdate xhost
gcl open-iscsi xm
gdb openldap xmllint
genisoimage openssl xmlwf
getent p4 xmms
gkrellm perl xmodmap
gnatmake pine xrandr
gpg pkg-config xrdb
gpg2 pkg_install xsltproc
grub pkgtools xz
gvfs-bash-completion.sh pm-utils yp-tools
gzip pon yum-arch
heimdal portupgrade zeitgeist-daemon
helpers postfix
hping2 postgresql

[collisionystm]

getting warm....

post output of

cat /etc/bash_completion

[AndyP79]

getting warm....

post output of

cat /etc/bash_completion


_known_hosts()
{
local options
COMPREPLY=()

# NOTE: Using `_known_hosts' as a helper function and passing options
# to `_known_hosts' is deprecated: Use `_known_hosts_real' instead.
[[ "$1" == -a || "$2" == -a ]] && options=-a
[[ "$1" == -c || "$2" == -c ]] && options="$options -c"
_known_hosts_real $options "$(_get_cword :)"
} # _known_hosts()

# Helper function for completing _known_hosts.
# This function performs host completion based on ssh's config and known_hosts
# files, as well as hostnames reported by avahi-browse if
# COMP_KNOWN_HOSTS_WITH_AVAHI is set to a non-empty value. Also hosts from
# HOSTFILE (compgen -A hostname) are added, unless
# COMP_KNOWN_HOSTS_WITH_HOSTFILE is set to an empty value.
# Usage: _known_hosts_real [OPTIONS] CWORD
# Options: -a Use aliases
# -c Use `:' suffix
# -F configfile Use `configfile' for configuration settings
# -p PREFIX Use PREFIX
# Return: Completions, starting with CWORD, are added to COMPREPLY[]
_known_hosts_real()
{
local configfile flag prefix
local cur curd awkcur user suffix aliases i host
local -a kh khd config

local OPTIND=1
while getopts "acF:p:" flag "$@"; do
case $flag in
a) aliases='yes' ;;
c) suffix=':' ;;
F) configfile=$OPTARG ;;
p) prefix=$OPTARG ;;
esac
done
[ $# -lt $OPTIND ] && echo "error: $FUNCNAME: missing mandatory argument CWORD"
cur=${!OPTIND}; let "OPTIND += 1"
[ $# -ge $OPTIND ] && echo "error: $FUNCNAME("$@"): unprocessed arguments:"\
$(while [ $# -ge $OPTIND ]; do printf '%s\n' ${!OPTIND}; shift; done)

[[ $cur == *@* ]] && user=${cur%@*}@ && cur=${cur#*@}
kh=()

# ssh config files
if [ -n "$configfile" ]; then
[ -r "$configfile" ] &&
config=( "${config[@]}" "$configfile" )
else
for i in /etc/ssh/ssh_config "${HOME}/.ssh/config" \
"${HOME}/.ssh2/config"; do
[ -r $i ] && config=( "${config[@]}" "$i" )
done
fi

# Known hosts files from configs
if [ ${#config[@]} -gt 0 ]; then
local OIFS=$IFS IFS=$'\n'
local -a tmpkh
# expand paths (if present) to global and user known hosts files
# TODO(?): try to make known hosts files with more than one consecutive
# spaces in their name work (watch out for ~ expansion
# breakage! Alioth#311595)
tmpkh=( $( awk 'sub("^[ \t]*([Gg][Ll][Oo][Bb][Aa][Ll]|[Uu][Ss][Ee][Rr])[Kk][Nn][Oo][Ww][Nn][Hh][Oo][Ss][Tt][Ss][Ff][Ii][Ll][Ee][ \t]+", "") { print $0 }' "${config[@]}" | sort -u ) )
for i in "${tmpkh[@]}"; do
# Remove possible quotes
i=${i//\"}
# Eval/expand possible `~' or `~user'
__expand_tilde_by_ref i
[ -r "$i" ] && kh=( "${kh[@]}" "$i" )
done
IFS=$OIFS
fi

if [ -z "$configfile" ]; then
# Global and user known_hosts files
for i in /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2 \
/etc/known_hosts /etc/known_hosts2 ~/.ssh/known_hosts \
~/.ssh/known_hosts2; do
[ -r $i ] && kh=( "${kh[@]}" $i )
done
for i in /etc/ssh2/knownhosts ~/.ssh2/hostkeys; do
[ -d $i ] && khd=( "${khd[@]}" $i/*pub )
done
fi

# If we have known_hosts files to use
if [[ ${#kh[@]} -gt 0 || ${#khd[@]} -gt 0 ]]; then
# Escape slashes and dots in paths for awk
awkcur=${cur//\//\\\/}
awkcur=${awkcur//\./\\\.}
curd=$awkcur

if [[ "$awkcur" == [0-9]*[.:]* ]]; then
# Digits followed by a dot or a colon - just search for that
awkcur="^$awkcur[.:]*"
elif [[ "$awkcur" == [0-9]* ]]; then
# Digits followed by no dot or colon - search for digits followed
# by a dot or a colon
awkcur="^$awkcur.*[.:]"
elif [ -z "$awkcur" ]; then
# A blank - search for a dot, a colon, or an alpha character
awkcur="[a-z.:]"
else
awkcur="^$awkcur"
fi

if [ ${#kh[@]} -gt 0 ]; then
# FS needs to look for a comma separated list
COMPREPLY=( "${COMPREPLY[@]}" $( awk 'BEGIN {FS=","}
/^\s*[^|\#]/ {for (i=1; i<=2; ++i) { \
sub(" .*$", "", $i); \
sub("^\\[", "", $i); sub("\\](:[0-9]+)?$", "", $i); \
if ($i ~ /'"$awkcur"'/) {print $i} \
}}' "${kh[@]}" 2>/dev/null ) )
fi
if [ ${#khd[@]} -gt 0 ]; then
# Needs to look for files called
# .../.ssh2/key_22_<hostname>.pub
# dont fork any processes, because in a cluster environment,
# there can be hundreds of hostkeys
for i in "${khd[@]}" ; do
if [[ "$i" == *key_22_$curd*.pub && -r "$i" ]]; then
host=${i/#*key_22_/}
host=${host/%.pub/}
COMPREPLY=( "${COMPREPLY[@]}" $host )
fi
done
fi

# apply suffix and prefix
for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
COMPREPLY[i]=$prefix$user${COMPREPLY[i]}$suffix
done
fi

# append any available aliases from config files
if [[ ${#config[@]} -gt 0 && -n "$aliases" ]]; then
local hosts=$( sed -ne 's/^[ \t]*[Hh][Oo][Ss][Tt]\([Nn][Aa][Mm][Ee]\)\{0,1\}['"$'\t '"']\{1,\}\([^#*?]*\)\(#.*\)\{0,1\}$/\2/p' "${config[@]}" )
COMPREPLY=( "${COMPREPLY[@]}" $( compgen -P "$prefix$user" \
-S "$suffix" -W "$hosts" -- "$cur" ) )
fi

# Add hosts reported by avahi-browse, if desired and it's available.

# This feature is disabled because it does not scale to
# larger networks. See:
# https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/510591

#if [[ ${COMP_KNOWN_HOSTS_WITH_AVAHI:-} ]] && \
# type avahi-browse &>/dev/null; then
# The original call to avahi-browse also had "-k", to avoid lookups
# into avahi's services DB. We don't need the name of the service, and
# if it contains ";", it may mistify the result. But on Gentoo (at
# least), -k wasn't available (even if mentioned in the manpage) some
# time ago, so...
# COMPREPLY=( "${COMPREPLY[@]}" $( \
# compgen -P "$prefix$user" -S "$suffix" -W \
# "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
# awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
#fi

# Add results of normal hostname completion, unless
# `COMP_KNOWN_HOSTS_WITH_HOSTFILE' is set to an empty value.
if [ -n "${COMP_KNOWN_HOSTS_WITH_HOSTFILE-1}" ]; then
COMPREPLY=( "${COMPREPLY[@]}"
$( compgen -A hostname -P "$prefix$user" -S "$suffix" -- "$cur" ) )
fi

__ltrim_colon_completions "$prefix$user$cur"

return 0
} # _known_hosts_real()
complete -F _known_hosts traceroute traceroute6 tracepath tracepath6 ping \
ping6 fping fping6 telnet host nslookup rsh rlogin ftp dig mtr \
ssh-installkeys showmount

# This meta-cd function observes the CDPATH variable, so that cd additionally
# completes on directories under those specified in CDPATH.
#
_cd()
{
local cur IFS=$'\n' i j k
_get_comp_words_by_ref cur

# try to allow variable completion
if [[ "$cur" == ?(\\)\$* ]]; then
COMPREPLY=( $( compgen -v -P '$' -- "${cur#?(\\)$}" ) )
return 0
fi

_compopt_o_filenames

# Use standard dir completion if no CDPATH or parameter starts with /,
# ./ or ../
if [[ -z "${CDPATH:-}" || "$cur" == ?(.)?(.)/* ]]; then
_filedir -d
return 0
fi

local -r mark_dirs=$(_rl_enabled mark-directories && echo y)
local -r mark_symdirs=$(_rl_enabled mark-symlinked-directories && echo y)

# we have a CDPATH, so loop on its contents
for i in ${CDPATH//:/$'\n'}; do
# create an array of matched subdirs
k="${#COMPREPLY[@]}"
for j in $( compgen -d $i/$cur ); do
if [[ ( $mark_symdirs && -h $j || $mark_dirs && ! -h $j ) && ! -d ${j#$i/} ]]; then
j="${j}/"
fi
COMPREPLY[k++]=${j#$i/}
done
done

_filedir -d

if [[ ${#COMPREPLY[@]} -eq 1 ]]; then
i=${COMPREPLY[0]}
if [[ "$i" == "$cur" && $i != "*/" ]]; then
COMPREPLY[0]="${i}/"
fi
fi

return 0
}
if shopt -q cdable_vars; then
complete -v -F _cd -o nospace cd
else
complete -F _cd -o nospace cd
fi

# a wrapper method for the next one, when the offset is unknown
_command()
{
local offset i

# find actual offset, as position of the first non-option
offset=1
for (( i=1; i <= COMP_CWORD; i++ )); do
if [[ "${COMP_WORDS[i]}" != -* ]]; then
offset=$i
break
fi
done
_command_offset $offset
}

# A meta-command completion function for commands like sudo(8), which need to
# first complete on a command, then complete according to that command's own
# completion definition - currently not quite foolproof (e.g. mount and umount
# don't work properly), but still quite useful.
#
_command_offset()
{
local cur func cline cspec noglob cmd i char_offset word_offset \
_COMMAND_FUNC _COMMAND_FUNC_ARGS

word_offset=$1

# rewrite current completion context before invoking
# actual command completion

# find new first word position, then
# rewrite COMP_LINE and adjust COMP_POINT
local first_word=${COMP_WORDS[$word_offset]}
for (( i=0; i <= ${#COMP_LINE}; i++ )); do
if [[ "${COMP_LINE:$i:${#first_word}}" == "$first_word" ]]; then
char_offset=$i
break
fi
done
COMP_LINE=${COMP_LINE:$char_offset}
COMP_POINT=$(( COMP_POINT - $char_offset ))

# shift COMP_WORDS elements and adjust COMP_CWORD
for (( i=0; i <= COMP_CWORD - $word_offset; i++ )); do
COMP_WORDS[i]=${COMP_WORDS[i+$word_offset]}
done
for (( i; i <= COMP_CWORD; i++ )); do
unset COMP_WORDS[i];
done
COMP_CWORD=$(( $COMP_CWORD - $word_offset ))

COMPREPLY=()
_get_comp_words_by_ref cur

if [[ $COMP_CWORD -eq 0 ]]; then
_compopt_o_filenames
COMPREPLY=( $( compgen -c -- "$cur" ) )
else
cmd=${COMP_WORDS[0]}
if complete -p ${cmd##*/} &>/dev/null; then
cspec=$( complete -p ${cmd##*/} )
if [ "${cspec#* -F }" != "$cspec" ]; then
# complete -F <function>

# get function name
func=${cspec#*-F }
func=${func%% *}

if [[ ${#COMP_WORDS[@]} -ge 2 ]]; then
$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}" "${COMP_WORDS[${#COMP_WORDS[@]}-2]}"
else
$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}"
fi

# remove any \: generated by a command that doesn't
# default to filenames or dirnames (e.g. sudo chown)
# FIXME: I'm pretty sure this does not work!
if [ "${cspec#*-o }" != "$cspec" ]; then
cspec=${cspec#*-o }
cspec=${cspec%% *}
if [[ "$cspec" != @(dir|file)names ]]; then
COMPREPLY=("${COMPREPLY[@]//\\\\:/:}")
else
_compopt_o_filenames
fi
fi
elif [ -n "$cspec" ]; then
cspec=${cspec#complete};
cspec=${cspec%%${cmd##*/}};
COMPREPLY=( $( eval compgen "$cspec" -- "$cur" ) );
fi
elif [ ${#COMPREPLY[@]} -eq 0 ]; then
_filedir
fi
fi
}
complete -F _command aoss command do else eval exec ltrace nice nohup padsp \
then time tsocks vsound xargs

_root_command()
{
local PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin
local root_command=$1
_command $1 $2 $3
}
complete -F _root_command fakeroot gksu gksudo kdesudo really sudo

# Return true if the completion should be treated as running as root
_complete_as_root()
{
[[ $EUID -eq 0 || ${root_command:-} ]]
}

_longopt()
{
local cur prev split=false
_get_comp_words_by_ref -n = cur prev

_split_longopt && split=true

case "$prev" in
--*[Dd][Ii][Rr]*)
_filedir -d
return 0
;;
--*[Ff][Ii][Ll][Ee]*|--*[Pp][Aa][Tt][Hh]*)
_filedir
return 0
;;
esac

$split && return 0

if [[ "$cur" == -* ]]; then
COMPREPLY=( $( compgen -W "$( $1 --help 2>&1 | \
sed -ne 's/.*\(--[-A-Za-z0-9]\{1,\}\).*/\1/p' | sort -u )" \
-- "$cur" ) )
elif [[ "$1" == @(mk|rm)dir ]]; then
_filedir -d
else
_filedir
fi
}
# makeinfo and texi2dvi are defined elsewhere.
for i in a2ps awk bash bc bison cat colordiff cp csplit \
curl cut date df diff dir du enscript env expand fmt fold gperf gprof \
grep grub head indent irb ld ldd less ln ls m4 md5sum mkdir mkfifo mknod \
mv netstat nl nm objcopy objdump od paste patch pr ptx readelf rm rmdir \
sed seq sha{,1,224,256,384,512}sum shar sort split strip tac tail tee \
texindex touch tr uname unexpand uniq units vdir wc wget who; do
have $i && complete -F _longopt -o default $i
done
unset i

_filedir_xspec()
{
local IFS cur xspec

IFS=$'\n'
COMPREPLY=()
_get_comp_words_by_ref cur

_expand || return 0

# get first exclusion compspec that matches this command
xspec=$( awk "/^complete[ \t]+.*[ \t]${1##*/}([ \t]|\$)/ { print \$0; exit }" \
"$BASH_COMPLETION" )
# prune to leave nothing but the -X spec
xspec=${xspec#*-X }
xspec=${xspec%% *}

local -a toks
local tmp

toks=( ${toks[@]-} $(
compgen -d -- "$(quote_readline "$cur")" | {
while read -r tmp; do
# see long TODO comment in _filedir() --David
printf '%s\n' $tmp
done
}
))

# Munge xspec to contain uppercase version too
eval xspec="${xspec}"
local matchop=!
if [[ $xspec == !* ]]; then
xspec=${xspec#!}
matchop=@
fi
[[ ${BASH_VERSINFO[0]} -ge 4 ]] && \
xspec="$matchop($xspec|${xspec^^})" || \
xspec="$matchop($xspec|$(printf %s $xspec | tr '[:lower:]' '[:upper:]'))"

toks=( ${toks[@]-} $(
eval compgen -f -X "!$xspec" -- "\$(quote_readline "\$cur")" | {
while read -r tmp; do
[ -n $tmp ] && printf '%s\n' $tmp
done
}
))

[ ${#toks[@]} -ne 0 ] && _compopt_o_filenames
COMPREPLY=( "${toks[@]}" )
}
list=( $( sed -ne '/^# START exclude/,/^# FINISH exclude/p' "$BASH_COMPLETION" | \
# read exclusion compspecs
(
while read line
do
# ignore compspecs that are commented out
if [ "${line#\#}" != "$line" ]; then continue; fi
line=${line%# START exclude*}
line=${line%# FINISH exclude*}
line=${line##*\'}
list=( "${list[@]}" $line )
done
printf '%s ' "${list[@]}"
)
) )
# remove previous compspecs
if [ ${#list[@]} -gt 0 ]; then
eval complete -r ${list[@]}
# install new compspecs
eval complete -F _filedir_xspec "${list[@]}"
fi
unset list

# source completion directory definitions
if [[ -d $BASH_COMPLETION_COMPAT_DIR && -r $BASH_COMPLETION_COMPAT_DIR && \
-x $BASH_COMPLETION_COMPAT_DIR ]]; then
for i in $(LC_ALL=C command ls "$BASH_COMPLETION_COMPAT_DIR"); do
i=$BASH_COMPLETION_COMPAT_DIR/$i
[[ ${i##*/} != @(*~|*.bak|*.swp|\#*\#|*.dpkg*|*.rpm@(orig|new|sav e)|Makefile*) \
&& -f $i && -r $i ]] && . "$i"
done
fi
if [[ $BASH_COMPLETION_DIR != $BASH_COMPLETION_COMPAT_DIR && \
-d $BASH_COMPLETION_DIR && -r $BASH_COMPLETION_DIR && \
-x $BASH_COMPLETION_DIR ]]; then
for i in $(LC_ALL=C command ls "$BASH_COMPLETION_DIR"); do
i=$BASH_COMPLETION_DIR/$i
[[ ${i##*/} != @(*~|*.bak|*.swp|\#*\#|*.dpkg*|*.rpm@(orig|new|sav e)|Makefile*) \
&& -f $i && -r $i ]] && . "$i"
done
fi
unset i

# source user completion file
[[ $BASH_COMPLETION != ~/.bash_completion && -r ~/.bash_completion ]] \
&& . ~/.bash_completion
unset -f have
unset UNAME USERLAND have

set $BASH_COMPLETION_ORIGINAL_V_VALUE
unset BASH_COMPLETION_ORIGINAL_V_VALUE

# Local variables:
# mode: shell-script
# sh-basic-offset: 4
# sh-indent-comment: t
# indent-tabs-mode: nil
# End:
# ex: ts=4 sw=4 et filetype=sh
andrew@dirkpitt:~$

[collisionystm]

do this

sudo apt-get install chsh

chsh -s /bin/bash

close terminal

re-open

still get errors?

[AndyP79]

do this

sudo apt-get install chsh

chsh -s /bin/bash

close terminal

re-open

still get errors?

andrew@dirkpitt:~$ sudo apt-get install chsh
[sudo] password for andrew:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package chsh


I did this, then did the second part and closed the terminal, still got the errors, I just pasted what the output was.

[yetiman64]

chsh is a part of (a command within) the passwd package not a package itself, that would explain it not being found. I do suspect collisionystm may have meant the C shell package "csh". Please wait for collisionystm to confirm this.

[collisionystm]

chsh is a part of (a command within) the passwd package not a package itself, that would explain it not being found. I do suspect collisionystm may have meant the C shell package "csh". Please wait for collisionystm to confirm this.


No my mistake

i thought he may need to install chsh


post the output of

cat /etc/bash_completion.d/mount

[collisionystm]

also post

cat /etc/initramfs-tools/initramfs.conf

[AndyP79]

No my mistake

i thought he may need to install chsh


post the output of

cat /etc/bash_completion.d/mount


andrew@dirkpitt:~$ cat /etc/bash_completion.d/mount
# mount(8) completion. This will pull a list of possible mounts out of
# /etc/{,v}fstab, unless the word being completed contains a ':', which
# would indicate the specification of an NFS server. In that case, we
# query the server for a list of all available exports and complete on
# that instead.
#
have mount &&
{

# Just like COMPREPLY=(`compgen -W "${COMPREPLY }" -- "$cur"`), only better!
#
# This will correctly escape special characters in COMPREPLY.
_reply_compgen_array()
{
# Create the argument for compgen -W by escaping twice.
#
# One round of escape is because we want to reply with escaped arguments. A
# second round is required because compgen -W will helpfully expand it's
# argument.
local i wlist
for i in ${!COMPREPLY }; do
local q=$(quote "$(printf %q "${COMPREPLY[$i]}")")
wlist+=$q$'\n'
done

# We also have to add another round of escaping to $cur.
local ecur="$cur"
ecur="${ecur//\\/\\\\}"
ecur="${ecur//\'/\'}"

# Actually generate completions.
local oldifs=$IFS
IFS=$'\n' eval 'COMPREPLY=(`compgen -W "$wlist" -- "${ecur}"`)'
IFS=$oldifs
}

# Unescape strings in the linux fstab(5) format (with octal escapes).
__linux_fstab_unescape() {
eval $1="'${!1//\'/\047}'"
eval $1="'${!1/%\\/\\\\}'"
eval "$1=$'${!1}'"
}

# Complete linux fstab entries.
#
# Reads a file from stdin in the linux fstab(5) format; as used by /etc/fstab
# and /proc/mounts.
_linux_fstab()
{
COMPREPLY=()

# Read and unescape values into COMPREPLY
local fs_spec fs_file fs_other
local oldifs="$IFS"
while read -r fs_spec fs_file fs_other; do
if [[ $fs_spec = [#]* ]]; then continue; fi
if [[ $1 == -L ]]; then
local fs_label=${fs_spec/#LABEL=}
if [[ $fs_label != "$fs_spec" ]]; then
__linux_fstab_unescape fs_label
IFS=$'\0'
COMPREPLY+=("$fs_label")
IFS=$oldifs
fi
else
__linux_fstab_unescape fs_spec
__linux_fstab_unescape fs_file
IFS=$'\0'
[[ $fs_spec = */* ]] && COMPREPLY+=("$fs_spec")
[[ $fs_file = */* ]] && COMPREPLY+=("$fs_file")
IFS=$oldifs
fi
done

_reply_compgen_array
}

_mount()
{
local cur sm host prev

COMPREPLY=()
_get_comp_words_by_ref -n : cur prev

case $prev in
-t|--types)
_fstypes
return 0
;;
esac

[[ "$cur" == \\ ]] && cur="/"

if [[ "$cur" == *:* ]]; then
for sm in "$(type -P showmount)" {,/usr}/{,s}bin/showmount; do
[ -x "$sm" ] || continue
COMPREPLY=( $( compgen -W "$( "$sm" -e ${cur%%:*} | \
awk 'NR>1 {print $1}' )" -- "${cur#*:}" ) )
return 0
done
fi

if [[ "$cur" == //* ]]; then
host=${cur#//}
host=${host%%/*}
if [ -n "$host" ]; then
COMPREPLY=( $( compgen -P "//$host" -W \
"$( smbclient -d 0 -NL $host 2>/dev/null |
sed -ne '/^['"$'\t '"']*Sharename/,/^$/p' |
sed -ne '3,$s|^[^A-Za-z]*\([^'"$'\t '"']*\).*$|/\1|p' )" \
-- "${cur#//$host}" ) )
fi
elif [ -r /etc/vfstab ]; then
# Solaris
COMPREPLY=( $( compgen -W "$( awk '! /^[ \t]*#/ {if ($3 ~ /\//) print $3}' /etc/vfstab )" -- "$cur" ) )
elif [ ! -e /etc/fstab ]; then
# probably Cygwin
COMPREPLY=( $( compgen -W "$( mount | awk '! /^[ \t]*#/ {if ($3 ~ /\//) print $3}' )" -- "$cur" ) )
else
# probably Linux
if [ "$prev" = -L ]; then
_linux_fstab -L < /etc/fstab
elif [ "$prev" = -U ]; then
COMPREPLY=( $( compgen -W '$(sed -ne "s/^[[:space:]]*UUID=\([^[:space:]]*\).*/\1/p" /etc/fstab )' -- "$cur" ) )
else
_linux_fstab < /etc/fstab
fi
fi

return 0
} &&
complete -F _mount -o default -o dirnames mount

# umount(8) completion. This relies on the mount point being the third
# space-delimited field in the output of mount(8)
#
have umount &&
_umount()
{
local cur
_get_comp_words_by_ref cur
COMPREPLY=()

if [[ $(uname -s) = Linux && -r /proc/mounts ]]; then
# Linux /proc/mounts is properly quoted. This is important when
# unmounting usb devices with pretty names.
_linux_fstab < /proc/mounts
else
local IFS=$'\n'
COMPREPLY=( $( compgen -W '$( mount | cut -d" " -f 3 )' -- "$cur" ) )
fi

return 0
} &&
complete -F _umount -o dirnames umount

}

# Local variables:
# mode: shell-script
# sh-basic-offset: 4
# sh-indent-comment: t
# indent-tabs-mode: nil
# End:
# ex: ts=4 sw=4 et filetype=sh
andrew@dirkpitt:~$

[AndyP79]

also post

cat /etc/initramfs-tools/initramfs.conf


andrew@dirkpitt:~$ cat /etc/initramfs-tools/initramfs.conf
#
# initramfs.conf
# Configuration file for mkinitramfs(8). See initramfs.conf(5).
#
# Note that configuration options from this file can be overridden
# by config files in the /etc/initramfs-tools/conf.d directory.

#
# MODULES: [ most | netboot | dep | list ]
#
# most - Add most filesystem and all harddrive drivers.
#
# dep - Try and guess which modules to load.
#
# netboot - Add the base modules, network modules, but skip block devices.
#
# list - Only include modules from the 'additional modules' list
#

MODULES=most

#
# BUSYBOX: [ y | n ]
#
# Use busybox if available.
#

BUSYBOX=y

#
# COMPCACHE_SIZE: [ "x K" | "x M" | "x G" | "x %" ]
#
# Amount of RAM to use for RAM-based compressed swap space.
#
# An empty value - compcache isn't used, or added to the initramfs at all.
# An integer and K (e.g. 65536 K) - use a number of kilobytes.
# An integer and M (e.g. 256 M) - use a number of megabytes.
# An integer and G (e.g. 1 G) - use a number of gigabytes.
# An integer and % (e.g. 50 %) - use a percentage of the amount of RAM.
#
# You can optionally install the compcache package to configure this setting
# via debconf and have userspace scripts to load and unload compcache.
#

COMPCACHE_SIZE=""

#
# COMPRESS: [ gzip | bzip2 | lzma | lzop | xz ]
#

COMPRESS=gzip

#
# NFS Section of the config.
#

#
# BOOT: [ local | nfs ]
#
# local - Boot off of local media (harddrive, USB stick).
#
# nfs - Boot using an NFS drive as the root of the drive.
#

BOOT=local

#
# DEVICE: ...
#
# Specify a specific network interface, like eth0
# Overridden by optional ip= bootarg
#

DEVICE=

#
# NFSROOT: [ auto | HOST:MOUNT ]
#

NFSROOT=auto

andrew@dirkpitt:~$

[AndyP79]

Monday bump

[jtarin]

Are you launching the terminal in a user account or root account? These commands that are listing as not found are normally only accessible under a root account. If you preface each command that was not found with "sudo" it should/would execute.Your first post.....is that what is exhibited in your terminal upon first launch before any command? Character by character?

[AndyP79]

Are you launching the terminal in a user account or root account? These commands that are listing as not found are normally only accessible under a root account. If you preface each command that was not found with "sudo" it should/would execute.Your first post.....is that what is exhibited in your terminal upon first launch before any command? Character by character?

Yes, when I open the terminal that happens first, then I can input whatever I need to no problem. It just started doing it for some reason a while ago, not sure what happened to make it start. So, should I start over on all the help and place sudo in front of each item?

[jtarin]

Yes, when I open the terminal that happens first, then I can input whatever I need to no problem. It just started doing it for some reason a while ago, not sure what happened to make it start. So, should I start over on all the help and place sudo in front of each item?
No....these programs run in the background without your intervention. Don't be concerned with that. The question is why your user account thinks they need to be run at all from that account.

[jtarin]

Copy and post your .profile file. It can be found as a hidden file in your home folder.

[AndyP79]

Copy and post your .profile file. It can be found as a hidden file in your home folder.

# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
# include .bashrc if it exists
if [ -f "$HOME/.bashrc" ]; then
. "$HOME/.bashrc"
fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi

[jtarin]

I'm still having problems with your very first post. When you copied the terminal output your first line was
bash: /dev/sda1: Permission denied
I would like for you to open a terminal without entering anything and copy the terminal prompt along with the first line.Prompt should be something similar to
username@hostname:~$

[collisionystm]

the problem is, terminal is automatically issuing the mount command when he opens it

for instance,

if he types

mount

into terminal and posts the output, we will the same lines in his errors on the OP

[collisionystm]

open terminal, right click on it, go to Profiles, Profile Preferences, Title and command tab

is the box checked for, run custom command instead of my shell

[jtarin]

the problem is, terminal is automatically issuing the mount command when he opens it

for instance,

if he types

mount

into terminal and posts the output, we will the same lines in his errors on the OPQuite possibly...maybe your on to something. I don't know of anything that would do that except user intervention.:-k

[collisionystm]

Quite possibly...maybe your on to something. I don't know of anything that would do that except user intervention.:-k

Yeah I am having a hard time figuring this out. It is always something simple but its hard when your not on the actual machine lol

[AndyP79]

open terminal, right click on it, go to Profiles, Profile Preferences, Title and command tab

is the box checked for, run custom command instead of my shell

the box marked is update login record when command is launched

[AndyP79]

Yeah I am having a hard time figuring this out. It is always something simple but its hard when your not on the actual machine lol

Just a quick thanks again for ya'll's help on this. I can image the frustration ya'll have not sitting right here to look at it. Thanks for the patience.

[AndyP79]

I'm still having problems with your very first post. When you copied the terminal output your first line was
bash: /dev/sda1: Permission denied
I would like for you to open a terminal without entering anything and copy the terminal prompt along with the first line.Prompt should be something similar to
username@hostname:~$

It does not have the promt, it just starts out exactly as that first post. :confused:

[collisionystm]

just got sh*ts and giggles can you post the output of

cat /etc/fstab

and then

open a new terminal, once that output is finished

type

bash

do you get the same output again?

[AndyP79]

just got sh*ts and giggles can you post the output of

cat /etc/fstab

and then

open a new terminal, once that output is finished

type

bash

do you get the same output again?


Sorry about the delay, thought I posted to this, guess I forgot to hit submit. Here is the results

andrew@dirkpitt:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=043c8892-cb4a-4b5d-aa1a-bdec7a74c5fc / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=ef1fceaa-ba11-472f-9112-8df62205f36d none swap sw 0 0
andrew@dirkpitt:~$


andrew@dirkpitt:~$ bash
bash: /dev/sda1: Permission denied
No command 'proc' found, did you mean:
Command 'nproc' from package 'coreutils' (main)
Command 'proj' from package 'proj-bin' (universe)
proc: command not found
sysfs: command not found
fusectl: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'udev' found, did you mean:
Command 'udv' from package 'ncbi-tools-x11' (universe)
Command 'udav' from package 'udav' (universe)
Command 'udevd' from package 'udev' (main)
udev: command not found
devpts: command not found
No command 'tmpfs' found, did you mean:
Command 'mtpfs' from package 'mtpfs' (universe)
tmpfs: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
No command 'none' found, did you mean:
Command 'nona' from package 'hugin-tools' (universe)
Command 'one' from package 'opennebula' (universe)
Command 'note' from package 'note' (universe)
Command 'cone' from package 'cone' (universe)
Command 'node' from package 'node' (universe)
Command 'node' from package 'nodejs' (universe)
none: command not found
binfmt_misc: command not found
gvfs-fuse-daemon: command not found
bash: .: /etc/bash_completion.d/iftop: cannot execute binary file
andrew@dirkpitt:~$


Still the same afterwards:(

[collisionystm]

btw... I noticed the Dirk Pitt.

Cussler Rocks!

[AndyP79]

btw... I noticed the Dirk Pitt.

Cussler Rocks!

I have to admitt I am a little behind. I have 3 unread books sitting on the shelf, and I think I need to pick up the last 3. I have almost all of his books in hardback.

[collisionystm]

I have to admitt I am a little behind. I have 3 unread books sitting on the shelf, and I think I need to pick up the last 3. I have almost all of his books in hardback.

My favorite author to read on a plane ride. Keeps me occupied.

[AndyP79]

Tuesday afternoon bump

[georgemc]

This is what I would do at this stage.

I would attempt to isolate the area in .bashrc that is causing these issues.

I would "bracket" one statement block at a time with "set -x" and "set +x" to find where all of this is coming from. The "set -x" switches debug output on and the "set +x" switches it off.

For example:


# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

#if [ "$PS1" ] ; then
# mkdir -m 0700 /dev/cgroup/cpu/user/$$
# mkdir -p -m 0700 /dev/cgroup/cpu/user/$$ > /dev/null 2>&1
# echo $$ > /dev/cgroup/cpu/user/$$/tasks
# echo "1" > /dev/cgroup/cpu/user/$$/notify_on_release
#fi

# If not running interactively, don't do anything
[ -z "$PS1" ] && return
set -x
# don't put duplicate lines in the history. See bash(1) for more options
# ... or force ignoredups and ignorespace
HISTCONTROL=ignoredups:ignorespace
set +x
# append to the history file, don't overwrite it
shopt -s histappend
........
........
In the example above I bracketed the HISTCONTROL statement block with "set -x" and "set +x"; saved .bashrc; then I opened a terminal or typed in "bash" into a terminal. You will see something like the following.



user@ubuntu-desktop:~/$ bash
+ HISTCONTROL=ignoredups:ignorespace
+ set +x
user@ubuntu-desktop:~/$
Now rinse and repeat for every statement block through out .bashrc until you find the block that produces some thing like this:



user@ubuntu-desktop:~/$ bash
+ SOME .BASHRC STATEMENT STUFF
bash: /dev/sda1: Permission denied << the issue output
No command 'proc' found, did you mean:
.... and all the rest ....
+ SOME MORE .BASHRC STATEMENT STUFF
user@ubuntu-desktop:~/$ bash
This may narrow it down to a specific part, program, shell script etc.

This will take some time to edit .bashrc, then invoke bash, compare the output, move the "set -+x" bracket to the next block.

See if you can narrow it down to some thing more specific. When you narrowed it down please post the beginning of the output so we can figure out where to go next.

Hope this helps.

George