Cant Load Windows 7 after upgrading to 11.10

[new.boss]

I was running ubuntu 11.04 and windows 7 dual boot until now. but after upgrading to 11.10 my windows 7 no longer boot-able. in boot menu, on selecting windows 7 same grub screen appears again.



Boot Info Script 0.60 from 17 May 2011


============================= Boot Info Summary: ===============================

=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.

sda1: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1
and looks at sector 185053232 of the same hard drive
for core.img. core.img is at this location and looks
for on this drive. No errors found in the Boot
Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________ ________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files:

sda6: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 2048.
Operating System:
Boot files:

sda7: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sda8: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda8 starts
at sector 63.
Operating System:
Boot files:

sda9: __________________________________________________ ________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 63 146,484,437 146,484,375 7 NTFS / exFAT / HPFS
/dev/sda2 146,485,246 1,953,520,064 1,807,034,819 f W95 Extended (LBA)
/dev/sda5 195,522,560 584,544,255 389,021,696 7 NTFS / exFAT / HPFS
/dev/sda6 584,546,304 973,567,992 389,021,689 7 NTFS / exFAT / HPFS
/dev/sda7 973,568,000 1,362,589,688 389,021,689 7 NTFS / exFAT / HPFS
/dev/sda8 1,362,601,170 1,953,520,064 590,918,895 7 NTFS / exFAT / HPFS
/dev/sda9 146,485,248 195,522,559 49,037,312 83 Linux


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/sda1 8AFCD7FBFCD7DF8D ntfs
/dev/sda5 68A631E5A631B482 ntfs Documents
/dev/sda6 1E6B8FC23494FF27 ntfs Photos
/dev/sda7 42CA3F03CA3EF331 ntfs Media
/dev/sda8 168674138673F21B ntfs Misc
/dev/sda9 06531841-8f21-40e0-9c5b-5429e6d3d4c8 ext4

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sda8 /media/Misc fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
/dev/sda9 / ext4 (rw,errors=remount-ro,commit=0)


=========================== sda9/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="1"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=800x600
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 8AFCD7FBFCD7DF8D
chainloader +1
}
### END /etc/grub.d/06_os-prober ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.1.0-0301rc4-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.1.0-0301rc4-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.1.0-0301rc4-generic
}
menuentry 'Ubuntu, with Linux 3.1.0-0301rc4-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.1.0-0301rc4-generic ...'
linux /boot/vmlinuz-3.1.0-0301rc4-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.1.0-0301rc4-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-12-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.0.0-12-generic-pae root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic-pae
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.0.0-12-generic-pae ...'
linux /boot/vmlinuz-3.0.0-12-generic-pae root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic-pae
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda9/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda9 during installation
UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------

=================== sda9: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

88.240283966 = 94.747283456 boot/grub/core.img 1
84.000846863 = 90.195222528 boot/grub/grub.cfg 1
74.287109375 = 79.765176320 boot/initrd.img-3.0.0-12-generic 2
74.299808502 = 79.778811904 boot/initrd.img-3.0.0-12-generic-pae 1
74.357154846 = 79.840387072 boot/initrd.img-3.1.0-0301rc4-generic 2
73.170330048 = 78.566043648 boot/vmlinuz-3.0.0-12-generic 1
73.291549683 = 78.696202240 boot/vmlinuz-3.0.0-12-generic-pae 1
71.404773712 = 76.670291968 boot/vmlinuz-3.1.0-0301rc4-generic 1
74.299808502 = 79.778811904 initrd.img 1
74.287109375 = 79.765176320 initrd.img.old 2
73.291549683 = 78.696202240 vmlinuz 1
73.170330048 = 78.566043648 vmlinuz.old 1

========= Devices which don't seem to have a corresponding hard drive: =========

sdb

=============================== StdErr Messages: ===============================

unlzma: Decoder error

[oldfred]

Please use code tags. That is the # in the edit menu. Highlight what you want in the code tags like the entire boot script and add the tags automatically by clicking on #.

You have installed grub2 boot loader to the sda1 Windows NTFS partition. You should have installed it to sda- MBR not sda1 PBR -Partition Boot sector. Windows has to have its boot code in the PBR.
You may be booting Ubuntu as Windows or sysLinux may be using the grub boot loader in the PBR. If so boot Ubuntu and install grub2 boot loader to the MBR first.

#reinstall from working (not liveCD) system - first find Ubuntu drive (example is drive sdb but use your drive not partitions):
sudo fdisk -l
#if it's "/dev/sda" then just run:
sudo grub-install /dev/sda

sudo update-grub

You may have to do this or grub may remember to reinstall on updates to the PBR:
#to get grub to remember where to reinstall on updates:
sudo dpkg-reconfigure grub-pc
#Enter thru first pages,spacebar to choose/unchoose drive, enter to accept, do not choose partitions

Windows NTFS partitions keep a backup of the Boot sector. Testdisk can restore from the backup if it is still valid.

Fix for most, a few have other issues, better than windows fix in many cases as it also fixes other parameters:

This has instructions on using testdisk to repair the install of grub to the boot sector for windows from Ubuntu or Linux LiveCD.
http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:Boot_Sector

Your NTFS boot sector that should say Windows:

sda1: _____________________________

File system: ntfs
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1
and looks at sector 185053232 of the same hard drive
for core.img. core.img is at this location and looks
for on this drive. No errors found in the Boot
Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe

[new.boss]

Thanks a lot. . . perfect useful answer . . .i have recovered windows MBR and modified through EasyBCD ( after recovering windows) this is output . . .

thanks again ..






Boot Info Script 0.60 from 17 May 2011


============================= Boot Info Summary: ===============================

=> Windows is installed in the MBR of /dev/sda.

sda1: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda2: __________________________________________________ ________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files:

sda6: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 2048.
Operating System:
Boot files:

sda7: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:

sda8: __________________________________________________ ________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda8 starts
at sector 63.
Operating System:
Boot files:

sda9: __________________________________________________ ________________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

============================ Drive/Partition Info: =============================

Drive: sda __________________________________________________ ___________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 63 146,484,437 146,484,375 7 NTFS / exFAT / HPFS
/dev/sda2 146,485,246 1,953,520,064 1,807,034,819 f W95 Extended (LBA)
/dev/sda5 195,522,560 584,544,255 389,021,696 7 NTFS / exFAT / HPFS
/dev/sda6 584,546,304 973,567,992 389,021,689 7 NTFS / exFAT / HPFS
/dev/sda7 973,568,000 1,362,589,688 389,021,689 7 NTFS / exFAT / HPFS
/dev/sda8 1,362,601,170 1,953,520,064 590,918,895 7 NTFS / exFAT / HPFS
/dev/sda9 146,485,248 195,522,559 49,037,312 83 Linux


"blkid" output: __________________________________________________ ______________

Device UUID TYPE LABEL

/dev/sda1 8AFCD7FBFCD7DF8D ntfs
/dev/sda5 68A631E5A631B482 ntfs Documents
/dev/sda6 1E6B8FC23494FF27 ntfs Photos
/dev/sda7 42CA3F03CA3EF331 ntfs Media
/dev/sda8 168674138673F21B ntfs Misc
/dev/sda9 06531841-8f21-40e0-9c5b-5429e6d3d4c8 ext4

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sda9 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sr0 /media/Win_7_OEM_EN_X86_X64_48in1 udf (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8, umask=0077,dmode=0500,uhelper=udisks)


=========================== sda9/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="1"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=800x600
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
set locale_dir=($root)/boot/grub/locale
set lang=en_IN
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 8AFCD7FBFCD7DF8D
chainloader +1
}
### END /etc/grub.d/06_os-prober ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.1.0-0301rc4-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.1.0-0301rc4-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.1.0-0301rc4-generic
}
menuentry 'Ubuntu, with Linux 3.1.0-0301rc4-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.1.0-0301rc4-generic ...'
linux /boot/vmlinuz-3.1.0-0301rc4-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.1.0-0301rc4-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.0.0-12-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.0.0-12-generic-pae root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic-pae
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.0.0-12-generic-pae ...'
linux /boot/vmlinuz-3.0.0-12-generic-pae root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic-pae
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos9)'
search --no-floppy --fs-uuid --set=root 06531841-8f21-40e0-9c5b-5429e6d3d4c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda9/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda9 during installation
UUID=06531841-8f21-40e0-9c5b-5429e6d3d4c8 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------

=================== sda9: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

88.045669556 = 94.538317824 boot/grub/core.img 1
90.002262115 = 96.639193088 boot/grub/grub.cfg 1
74.287109375 = 79.765176320 boot/initrd.img-3.0.0-12-generic 2
74.299808502 = 79.778811904 boot/initrd.img-3.0.0-12-generic-pae 1
74.357154846 = 79.840387072 boot/initrd.img-3.1.0-0301rc4-generic 2
73.170330048 = 78.566043648 boot/vmlinuz-3.0.0-12-generic 1
73.291549683 = 78.696202240 boot/vmlinuz-3.0.0-12-generic-pae 1
71.404773712 = 76.670291968 boot/vmlinuz-3.1.0-0301rc4-generic 1
74.299808502 = 79.778811904 initrd.img 1
74.287109375 = 79.765176320 initrd.img.old 2
73.291549683 = 78.696202240 vmlinuz 1
73.170330048 = 78.566043648 vmlinuz.old 1

[oldfred]

Windows looks normal now. I do not know EasyBCD. I thought you had to install the grub2 boot loader to the Linux partition for Easy to be able to boot Ubuntu.

Grub2 is not recommended to install to a partition boot sector - PBR as it is small and grub converts to blocklists or hard coded addresses to find the rest of the boot code. If grub is updated the address may change & you have to reinstall grub to the PBR>