[ubuntu] several issues with 11.10 installation [Archive]

danielsender

October 14th, 2011, 08:26 PM

Hi,

I installed 11.10 on two machines, a Dell M380 and a Dell M50 laptop. The first was an upgrade from 11.04 while the second was a clean install. I have several problems, that are:

M380:
1. If I start in "Ubuntu" mode, the screen is essentially frozen and partially white. On the other hand if I start in "Ubuntu2" mode, then it seems OK. I installed the additional Nvidia proprietary driver but it didn't help.

2. It seems that something is broken with the vncviewer when using a tunnel through SSH. After typing something like: "vncviewer -via user@host1 host2:1" I get:

Fri Oct 14 12:20:46 2011
CConn: connected to host localhost port 5599
*** stack smashing detected ***: vncviewer terminated
======= Backtrace: =========
/lib/i386-linux-gnu/libc.so.6(__fortify_fail+0x45)[0x1f78d5]
/lib/i386-linux-gnu/libc.so.6(+0xe7887)[0x1f7887]
vncviewer[0x8082f91]
vncviewer[0x807e534]
vncviewer[0x805064b]
vncviewer[0x805a056]
/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3)[0x129113]
vncviewer[0x804c6b1]
======= Memory map: ========
00110000-00286000 r-xp 00000000 08:11 5767195 /lib/i386-linux-gnu/libc-2.13.so
00286000-00288000 r--p 00176000 08:11 5767195 /lib/i386-linux-gnu/libc-2.13.so
00288000-00289000 rw-p 00178000 08:11 5767195 /lib/i386-linux-gnu/libc-2.13.so
00289000-0028c000 rw-p 00000000 00:00 0
0028c000-0028f000 r-xp 00000000 08:11 5767204 /lib/i386-linux-gnu/libdl-2.13.so
0028f000-00290000 r--p 00002000 08:11 5767204 /lib/i386-linux-gnu/libdl-2.13.so
00290000-00291000 rw-p 00003000 08:11 5767204 /lib/i386-linux-gnu/libdl-2.13.so
00296000-002a7000 r-xp 00000000 08:11 5767614 /usr/lib/i386-linux-gnu/libXext.so.6.4.0
002a7000-002a8000 r--p 00010000 08:11 5767614 /usr/lib/i386-linux-gnu/libXext.so.6.4.0
002a8000-002a9000 rw-p 00011000 08:11 5767614 /usr/lib/i386-linux-gnu/libXext.so.6.4.0
002a9000-002d1000 r-xp 00000000 08:11 5767205 /lib/i386-linux-gnu/libm-2.13.so
002d1000-002d2000 r--p 00028000 08:11 5767205 /lib/i386-linux-gnu/libm-2.13.so
002d2000-002d3000 rw-p 00029000 08:11 5767205 /lib/i386-linux-gnu/libm-2.13.so
002d3000-002dc000 r-xp 00000000 08:11 5768767 /usr/lib/i386-linux-gnu/libXrender.so.1.3.0
002dc000-002dd000 r--p 00008000 08:11 5768767 /usr/lib/i386-linux-gnu/libXrender.so.1.3.0
002dd000-002de000 rw-p 00009000 08:11 5768767 /usr/lib/i386-linux-gnu/libXrender.so.1.3.0
002de000-002e9000 r-xp 00000000 08:11 5767214 /lib/i386-linux-gnu/libnss_files-2.13.so
002e9000-002ea000 r--p 0000a000 08:11 5767214 /lib/i386-linux-gnu/libnss_files-2.13.so
002ea000-002eb000 rw-p 0000b000 08:11 5767214 /lib/i386-linux-gnu/libnss_files-2.13.so
005de000-005df000 r-xp 00000000 00:00 0 [vdso]
006b6000-006d3000 r-xp 00000000 08:11 5767309 /usr/lib/i386-linux-gnu/libxcb.so.1.1.0
006d3000-006d4000 r--p 0001c000 08:11 5767309 /usr/lib/i386-linux-gnu/libxcb.so.1.1.0
006d4000-006d5000 rw-p 0001d000 08:11 5767309 /usr/lib/i386-linux-gnu/libxcb.so.1.1.0
00705000-00836000 r-xp 00000000 08:11 5767437 /usr/lib/i386-linux-gnu/libX11.so.6.3.0
00836000-00837000 ---p 00131000 08:11 5767437 /usr/lib/i386-linux-gnu/libX11.so.6.3.0
00837000-00838000 r--p 00131000 08:11 5767437 /usr/lib/i386-linux-gnu/libX11.so.6.3.0
00838000-0083a000 rw-p 00132000 08:11 5767437 /usr/lib/i386-linux-gnu/libX11.so.6.3.0
0083a000-0083b000 rw-p 00000000 00:00 0
00871000-00875000 r-xp 00000000 08:11 5768968 /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0
00875000-00876000 r--p 00003000 08:11 5768968 /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0
00876000-00877000 rw-p 00004000 08:11 5768968 /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0
00911000-0092f000 r-xp 00000000 08:11 5767187 /lib/i386-linux-gnu/ld-2.13.so
0092f000-00930000 r--p 0001d000 08:11 5767187 /lib/i386-linux-gnu/ld-2.13.so
00930000-00931000 rw-p 0001e000 08:11 5767187 /lib/i386-linux-gnu/ld-2.13.so
00a15000-00a28000 r-xp 00000000 08:11 5767762 /lib/i386-linux-gnu/libz.so.1.2.3.4
00a28000-00a29000 r--p 00012000 08:11 5767762 /lib/i386-linux-gnu/libz.so.1.2.3.4
00a29000-00a2a000 rw-p 00013000 08:11 5767762 /lib/i386-linux-gnu/libz.so.1.2.3.4
00b63000-00b65000 r-xp 00000000 08:11 5767299 /usr/lib/i386-linux-gnu/libXau.so.6.0.0
00b65000-00b66000 r--p 00001000 08:11 5767299 /usr/lib/i386-linux-gnu/libXau.so.6.0.0
00b66000-00b67000 rw-p 00002000 08:11 5767299 /usr/lib/i386-linux-gnu/libXau.so.6.0.0
00ba3000-00bbf000 r-xp 00000000 08:11 5767188 /lib/i386-linux-gnu/libgcc_s.so.1
00bbf000-00bc0000 r--p 0001b000 08:11 5767188 /lib/i386-linux-gnu/libgcc_s.so.1
00bc0000-00bc1000 rw-p 0001c000 08:11 5767188 /lib/i386-linux-gnu/libgcc_s.so.1
00c00000-00cde000 r-xp 00000000 08:11 5767646 /usr/lib/i386-linux-gnu/libstdc++.so.6.0.16
00cde000-00cdf000 ---p 000de000 08:11 5767646 /usr/lib/i386-linux-gnu/libstdc++.so.6.0.16
00cdf000-00ce3000 r--p 000de000 08:11 5767646 /usr/lib/i386-linux-gnu/libstdc++.so.6.0.16
00ce3000-00ce4000 rw-p 000e2000 08:11 5767646 /usr/lib/i386-linux-gnu/libstdc++.so.6.0.16
00ce4000-00ceb000 rw-p 00000000 00:00 0
00e9b000-00ea0000 r-xp 00000000 08:11 5767304 /usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
00ea0000-00ea1000 r--p 00004000 08:11 5767304 /usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
00ea1000-00ea2000 rw-p 00005000 08:11 5767304 /usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
00f63000-00f6c000 r-xp 00000000 08:11 5768535 /usr/lib/i386-linux-gnu/libXcursor.so.1.0.2
00f6c000-00f6d000 r--p 00008000 08:11 5768535 /usr/lib/i386-linux-gnu/libXcursor.so.1.0.2
00f6d000-00f6e000 rw-p 00009000 08:11 5768535 /usr/lib/i386-linux-gnu/libXcursor.so.1.0.2
08048000-08099000 r-xp 00000000 08:11 4031 /usr/bin/xvnc4viewer
0809a000-0809b000 r--p 00051000 08:11 4031 /usr/bin/xvnc4viewer
0809b000-0809c000 rw-p 00052000 08:11 4031 /usr/bin/xvnc4viewer
0809c000-0809d000 rw-p 00000000 00:00 0
09b4b000-09b6c000 rw-p 00000000 00:00 0 [heap]
b7782000-b7787000 rw-p 00000000 00:00 0
b77a2000-b77a4000 rw-p 00000000 00:00 0
bf9a7000-bf9c8000 rw-p 00000000 00:00 0 [stack]
M50:
The install went OK, but when I boot the screen is black. I can get on the console by typing ctrl-alt-Fx and log on for rebooting, but the screen is alway black.

Thanks,

Daniel

danielsender

October 14th, 2011, 11:26 PM

Yes, the xtightvncviewer alternative worked, thanks. With respect to the M50 problem, I'm attaching the Xorg.0.log here:

[ 51.779]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 51.779] X Protocol Version 11, Revision 0
[ 51.779] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[ 51.779] Current Operating System: Linux kidhug 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686
[ 51.779] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=67e485e0-aa01-44ad-b18f-48462d9c906e ro recovery nomodeset
[ 51.779] Build Date: 29 September 2011 12:48:48AM
[ 51.779] xorg-server 2:1.10.4-1ubuntu4 (For technical support please see http://www.ubuntu.com/support)
[ 51.779] Current version of pixman: 0.22.2
[ 51.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 51.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.790] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 14:06:09 2011
[ 51.790] (==) Using config file: "/etc/X11/xorg.conf"
[ 51.790] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 51.791] (==) No Layout section. Using the first Screen section.
[ 51.791] (**) |-->Screen "Default Screen" (0)
[ 51.791] (**) | |-->Monitor "<default monitor>"
[ 51.791] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 51.791] (**) | |-->Device "Default Device"
[ 51.791] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 51.791] (==) Automatically adding devices
[ 51.791] (==) Automatically enabling devices
[ 51.792] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 51.792] Entry deleted from font path.
[ 51.792] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 51.792] Entry deleted from font path.
[ 51.792] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 51.792] Entry deleted from font path.
[ 51.792] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 51.792] Entry deleted from font path.
[ 51.792] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 51.792] Entry deleted from font path.
[ 51.792] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 51.792] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 51.792] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 51.792] (II) Loader magic: 0x823ada0
[ 51.792] (II) Module ABI versions:
[ 51.792] X.Org ANSI C Emulation: 0.4
[ 51.792] X.Org Video Driver: 10.0
[ 51.792] X.Org XInput driver : 12.3
[ 51.792] X.Org Server Extension : 5.0
[ 51.793] (--) PCI:*(0:1:0:0) 10de:017c:1028:00d5 rev 163, Mem @ 0xfc000000/16777216, 0xe0000000/134217728, 0xdff80000/524288, BIOS @ 0x????????/131072
[ 51.796] (II) Open ACPI successful (/var/run/acpid.socket)
[ 51.796] (II) LoadModule: "extmod"
[ 51.798] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 51.798] (II) Module extmod: vendor="X.Org Foundation"
[ 51.798] compiled for 1.10.4, module version = 1.0.0
[ 51.798] Module class: X.Org Server Extension
[ 51.798] ABI class: X.Org Server Extension, version 5.0
[ 51.798] (II) Loading extension MIT-SCREEN-SAVER
[ 51.798] (II) Loading extension XFree86-VidModeExtension
[ 51.798] (II) Loading extension XFree86-DGA
[ 51.798] (II) Loading extension DPMS
[ 51.798] (II) Loading extension XVideo
[ 51.798] (II) Loading extension XVideo-MotionCompensation
[ 51.798] (II) Loading extension X-Resource
[ 51.798] (II) LoadModule: "dbe"
[ 51.799] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 51.799] (II) Module dbe: vendor="X.Org Foundation"
[ 51.799] compiled for 1.10.4, module version = 1.0.0
[ 51.799] Module class: X.Org Server Extension
[ 51.799] ABI class: X.Org Server Extension, version 5.0
[ 51.799] (II) Loading extension DOUBLE-BUFFER
[ 51.799] (II) LoadModule: "glx"
[ 51.799] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[ 51.862] (II) Module glx: vendor="NVIDIA Corporation"
[ 51.862] compiled for 4.0.2, module version = 1.0.0
[ 51.862] Module class: X.Org Server Extension
[ 51.862] (II) NVIDIA GLX Module 96.43.20 Sun Jul 17 23:48:16 PDT 2011
[ 51.862] (II) Loading extension GLX
[ 51.862] (II) LoadModule: "record"
[ 51.863] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 51.863] (II) Module record: vendor="X.Org Foundation"
[ 51.863] compiled for 1.10.4, module version = 1.13.0
[ 51.863] Module class: X.Org Server Extension
[ 51.863] ABI class: X.Org Server Extension, version 5.0
[ 51.863] (II) Loading extension RECORD
[ 51.863] (II) LoadModule: "dri"
[ 51.866] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 51.867] (II) Module dri: vendor="X.Org Foundation"
[ 51.867] compiled for 1.10.4, module version = 1.0.0
[ 51.867] ABI class: X.Org Server Extension, version 5.0
[ 51.867] (II) Loading extension XFree86-DRI
[ 51.867] (II) LoadModule: "dri2"
[ 51.868] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 51.868] (II) Module dri2: vendor="X.Org Foundation"
[ 51.868] compiled for 1.10.4, module version = 1.2.0
[ 51.868] ABI class: X.Org Server Extension, version 5.0
[ 51.868] (II) Loading extension DRI2
[ 51.868] (==) Matched nvidia as autoconfigured driver 0
[ 51.868] (==) Matched nouveau as autoconfigured driver 1
[ 51.868] (==) Matched nv as autoconfigured driver 2
[ 51.868] (==) Matched vesa as autoconfigured driver 3
[ 51.868] (==) Matched fbdev as autoconfigured driver 4
[ 51.868] (==) Assigned the driver to the xf86ConfigLayout
[ 51.868] (II) LoadModule: "nvidia"
[ 51.868] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 51.870] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 51.870] compiled for 4.0.2, module version = 1.0.0
[ 51.870] Module class: X.Org Video Driver
[ 51.870] (II) LoadModule: "nouveau"
[ 51.871] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 51.871] (II) Module nouveau: vendor="X.Org Foundation"
[ 51.871] compiled for 1.10.1, module version = 0.0.16
[ 51.871] Module class: X.Org Video Driver
[ 51.871] ABI class: X.Org Video Driver, version 10.0
[ 51.871] (II) LoadModule: "nv"
[ 51.880] (WW) Warning, couldn't open module nv
[ 51.880] (II) UnloadModule: "nv"
[ 51.880] (II) Unloading nv
[ 51.880] (EE) Failed to load module "nv" (module does not exist, 0)
[ 51.880] (II) LoadModule: "vesa"
[ 51.881] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 51.881] (II) Module vesa: vendor="X.Org Foundation"
[ 51.881] compiled for 1.10.2, module version = 2.3.0
[ 51.881] Module class: X.Org Video Driver
[ 51.881] ABI class: X.Org Video Driver, version 10.0
[ 51.881] (II) LoadModule: "fbdev"
[ 51.882] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 51.882] (II) Module fbdev: vendor="X.Org Foundation"
[ 51.882] compiled for 1.10.0, module version = 0.4.2
[ 51.882] ABI class: X.Org Video Driver, version 10.0
[ 51.882] (II) NVIDIA dlloader X Driver 96.43.20 Sun Jul 17 23:35:47 PDT 2011
[ 51.882] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 51.882] (II) NOUVEAU driver Date: Thu Mar 24 02:13:12 2011 +1000
[ 51.882] (II) NOUVEAU driver for NVIDIA chipset families :
[ 51.882] RIVA TNT (NV04)
[ 51.882] RIVA TNT2 (NV05)
[ 51.882] GeForce 256 (NV10)
[ 51.882] GeForce 2 (NV11, NV15)
[ 51.882] GeForce 4MX (NV17, NV18)
[ 51.883] GeForce 3 (NV20)
[ 51.883] GeForce 4Ti (NV25, NV28)
[ 51.883] GeForce FX (NV3x)
[ 51.883] GeForce 6 (NV4x)
[ 51.883] GeForce 7 (G7x)
[ 51.883] GeForce 8 (G8x)
[ 51.883] GeForce GTX 200 (NVA0)
[ 51.883] GeForce GTX 400 (NVC0)
[ 51.883] (II) VESA: driver for VESA chipsets: vesa
[ 51.883] (II) FBDEV: driver for framebuffer: fbdev
[ 51.883] (++) using VT number 7

[ 51.885] (II) Loading sub module "fb"
[ 51.885] (II) LoadModule: "fb"
[ 51.885] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 51.886] (II) Module fb: vendor="X.Org Foundation"
[ 51.886] compiled for 1.10.4, module version = 1.0.0
[ 51.886] ABI class: X.Org ANSI C Emulation, version 0.4
[ 51.886] (II) Loading sub module "ramdac"
[ 51.886] (II) LoadModule: "ramdac"
[ 51.886] (II) Module "ramdac" already built-in
[ 51.886] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 51.886] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 51.886] (WW) Falling back to old probe method for vesa
[ 51.886] (WW) Falling back to old probe method for fbdev
[ 51.886] (II) Loading sub module "fbdevhw"
[ 51.886] (II) LoadModule: "fbdevhw"
[ 51.887] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 51.887] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 51.887] compiled for 1.10.4, module version = 0.0.2
[ 51.887] ABI class: X.Org Video Driver, version 10.0
[ 51.891] (EE) open /dev/fb0: No such file or directory
[ 51.891] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 51.891] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 51.892] (==) NVIDIA(0): RGB weight 888
[ 51.892] (==) NVIDIA(0): Default visual is TrueColor
[ 51.892] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 51.892] (**) NVIDIA(0): Option "NoLogo" "True"
[ 51.892] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[ 51.892] (**) NVIDIA(0): Enabling RENDER acceleration
[ 51.892] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 51.892] (II) NVIDIA(0): enabled.
[ 52.514] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 52.515] (II) NVIDIA(0): NVIDIA GPU Quadro4 500 GoGL at PCI:1:0:0 (GPU-0)
[ 52.515] (--) NVIDIA(0): Memory: 65536 kBytes
[ 52.515] (--) NVIDIA(0): VideoBIOS: 04.17.00.22.f8
[ 52.515] (II) NVIDIA(0): Detected AGP rate: 4X
[ 52.515] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 52.515] (--) NVIDIA(0): Connected display device(s) on Quadro4 500 GoGL at PCI:1:0:0:
[ 52.515] (--) NVIDIA(0): CRT-0
[ 52.515] (--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0)
[ 52.515] (--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
[ 52.515] (--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 224.0 MHz maximum pixel
[ 52.515] (--) NVIDIA(0): clock
[ 52.515] (--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
[ 52.522] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 52.523] (WW) NVIDIA(0):
[ 52.523] (WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 52.523] (WW) NVIDIA(0): will be used as the requested mode.
[ 52.523] (WW) NVIDIA(0):
[ 52.523] (II) NVIDIA(0): Validated modes:
[ 52.523] (II) NVIDIA(0): "nvidia-auto-select"
[ 52.523] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 52.523] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 52.523] (WW) NVIDIA(0): from CRT-0's EDID.
[ 52.523] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 52.523] (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
[ 52.523] (WW) NVIDIA(0): UBB.
[ 52.523] (II) UnloadModule: "nouveau"
[ 52.523] (II) Unloading nouveau
[ 52.523] (II) UnloadModule: "vesa"
[ 52.523] (II) Unloading vesa
[ 52.523] (II) UnloadModule: "fbdev"
[ 52.523] (II) Unloading fbdev
[ 52.523] (II) UnloadModule: "fbdevhw"
[ 52.523] (II) Unloading fbdevhw
[ 52.523] (--) Depth 24 pixmap format is 32 bpp
[ 52.526] (II) NVIDIA(0): Initialized GART.
[ 52.551] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 52.721] (II) Loading extension NV-GLX
[ 52.734] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 52.735] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 52.735] (==) NVIDIA(0): Backing store disabled
[ 52.735] (==) NVIDIA(0): Silken mouse enabled
[ 52.735] (==) NVIDIA(0): DPMS enabled
[ 52.736] (II) Loading extension NV-CONTROL
[ 52.736] (==) RandR enabled
[ 52.736] (II) Initializing built-in extension Generic Event Extension
[ 52.736] (II) Initializing built-in extension SHAPE
[ 52.736] (II) Initializing built-in extension MIT-SHM
[ 52.736] (II) Initializing built-in extension XInputExtension
[ 52.736] (II) Initializing built-in extension XTEST
[ 52.736] (II) Initializing built-in extension BIG-REQUESTS
[ 52.736] (II) Initializing built-in extension SYNC
[ 52.736] (II) Initializing built-in extension XKEYBOARD
[ 52.736] (II) Initializing built-in extension XC-MISC
[ 52.736] (II) Initializing built-in extension SECURITY
[ 52.736] (II) Initializing built-in extension XINERAMA
[ 52.736] (II) Initializing built-in extension XFIXES
[ 52.736] (II) Initializing built-in extension RENDER
[ 52.736] (II) Initializing built-in extension RANDR
[ 52.736] (II) Initializing built-in extension COMPOSITE
[ 52.736] (II) Initializing built-in extension DAMAGE
[ 52.736] (II) Initializing built-in extension GESTURE
[ 52.753] (II) Initializing extension GLX
[ 52.849] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 52.878] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 52.878] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 52.878] (II) LoadModule: "evdev"
[ 52.879] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.881] (II) Module evdev: vendor="X.Org Foundation"
[ 52.881] compiled for 1.10.2, module version = 2.6.0
[ 52.881] Module class: X.Org XInput Driver
[ 52.881] ABI class: X.Org XInput driver, version 12.3
[ 52.881] (II) Using input driver 'evdev' for 'Video Bus'
[ 52.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.881] (**) Video Bus: always reports core events
[ 52.881] (**) Video Bus: Device: "/dev/input/event6"
[ 52.882] (--) Video Bus: Found keys
[ 52.882] (II) Video Bus: Configuring as keyboard
[ 52.882] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/LNXVIDEO:00/input/input6/event6"
[ 52.882] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 52.882] (**) Option "xkb_rules" "evdev"
[ 52.882] (**) Option "xkb_model" "pc105"
[ 52.882] (**) Option "xkb_layout" "us"
[ 52.899] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 52.900] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 52.900] (II) Using input driver 'evdev' for 'Power Button'
[ 52.900] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.900] (**) Power Button: always reports core events
[ 52.900] (**) Power Button: Device: "/dev/input/event1"
[ 52.900] (--) Power Button: Found keys
[ 52.900] (II) Power Button: Configuring as keyboard
[ 52.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 52.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 52.900] (**) Option "xkb_rules" "evdev"
[ 52.900] (**) Option "xkb_model" "pc105"
[ 52.900] (**) Option "xkb_layout" "us"
[ 52.901] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 52.902] (II) No input driver/identifier specified (ignoring)
[ 52.902] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 52.902] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 52.902] (II) Using input driver 'evdev' for 'Sleep Button'
[ 52.902] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.903] (**) Sleep Button: always reports core events
[ 52.903] (**) Sleep Button: Device: "/dev/input/event2"
[ 52.903] (--) Sleep Button: Found keys
[ 52.903] (II) Sleep Button: Configuring as keyboard
[ 52.903] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 52.903] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 52.903] (**) Option "xkb_rules" "evdev"
[ 52.903] (**) Option "xkb_model" "pc105"
[ 52.903] (**) Option "xkb_layout" "us"
[ 52.907] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 52.907] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 52.907] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 52.907] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.908] (**) Logitech USB Receiver: always reports core events
[ 52.909] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[ 52.909] (--) Logitech USB Receiver: Found keys
[ 52.909] (II) Logitech USB Receiver: Configuring as keyboard
[ 52.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb2/2-1/2-1:1.0/input/input4/event4"
[ 52.909] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 52.909] (**) Option "xkb_rules" "evdev"
[ 52.909] (**) Option "xkb_model" "pc105"
[ 52.909] (**) Option "xkb_layout" "us"
[ 52.911] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 52.911] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 52.911] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 52.911] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 52.911] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.911] (**) Logitech USB Receiver: always reports core events
[ 52.911] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[ 52.912] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 52.912] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 52.912] (--) Logitech USB Receiver: Found relative axes
[ 52.912] (--) Logitech USB Receiver: Found x and y relative axes
[ 52.912] (--) Logitech USB Receiver: Found keys
[ 52.912] (II) Logitech USB Receiver: Configuring as mouse
[ 52.912] (II) Logitech USB Receiver: Configuring as keyboard
[ 52.912] (II) Logitech USB Receiver: Adding scrollwheel support
[ 52.912] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 52.912] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 52.912] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb2/2-1/2-1:1.1/input/input5/event5"
[ 52.912] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 52.912] (**) Option "xkb_rules" "evdev"
[ 52.912] (**) Option "xkb_model" "pc105"
[ 52.912] (**) Option "xkb_layout" "us"
[ 52.913] (II) Logitech USB Receiver: initialized for relative axes.
[ 52.913] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 52.913] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 52.913] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 52.913] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 52.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 52.914] (II) No input driver/identifier specified (ignoring)
[ 52.925] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 52.925] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 52.925] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 52.925] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.925] (**) AT Translated Set 2 keyboard: always reports core events
[ 52.925] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 52.926] (--) AT Translated Set 2 keyboard: Found keys
[ 52.926] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 52.926] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 52.926] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 52.926] (**) Option "xkb_rules" "evdev"
[ 52.926] (**) Option "xkb_model" "pc105"
[ 52.926] (**) Option "xkb_layout" "us"
[ 52.927] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event7)
[ 52.927] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 52.927] (**) DualPoint Stick: Applying InputClass "trackpoint catchall"
[ 52.927] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 52.927] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 52.927] (**) DualPoint Stick: always reports core events
[ 52.928] (**) DualPoint Stick: Device: "/dev/input/event7"
[ 52.928] (--) DualPoint Stick: Found 3 mouse buttons
[ 52.928] (--) DualPoint Stick: Found relative axes
[ 52.928] (--) DualPoint Stick: Found x and y relative axes
[ 52.928] (II) DualPoint Stick: Configuring as mouse
[ 52.928] (**) Option "Emulate3Buttons" "true"
[ 52.928] (**) Option "EmulateWheel" "true"
[ 52.928] (**) Option "EmulateWheelButton" "2"
[ 52.928] (**) Option "YAxisMapping" "4 5"
[ 52.928] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 52.928] (**) Option "XAxisMapping" "6 7"
[ 52.928] (**) DualPoint Stick: XAxisMapping: buttons 6 and 7
[ 52.928] (**) DualPoint Stick: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 52.928] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 52.928] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
[ 52.928] (II) DualPoint Stick: initialized for relative axes.
[ 52.928] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 52.928] (**) DualPoint Stick: (accel) acceleration profile 0
[ 52.929] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 52.929] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 52.929] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[ 52.929] (II) No input driver/identifier specified (ignoring)
[ 52.930] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event8)
[ 52.930] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 52.930] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 52.930] (II) LoadModule: "synaptics"
[ 52.931] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 52.931] (II) Module synaptics: vendor="X.Org Foundation"
[ 52.931] compiled for 1.10.4, module version = 1.4.1
[ 52.931] Module class: X.Org XInput Driver
[ 52.931] ABI class: X.Org XInput driver, version 12.3
[ 52.931] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 52.931] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 52.931] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 52.931] (**) Option "Device" "/dev/input/event8"
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 16
[ 52.932] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 52.932] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 52.932] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 52.932] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
[ 52.932] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 52.932] (**) AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[ 52.932] (**) AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156
[ 52.932] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 52.933] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 52.933] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 52.933] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 52.933] (II) AlpsPS/2 ALPS DualPoint TouchPad: failed to open grail, no gesture support
[ 52.933] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 52.934] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[ 52.934] (II) No input driver/identifier specified (ignoring)
[ 55.147] Warning: Xalloc: requesting unpleasantly large amount of memory: 0 bytes.
[ 398.963] (II) config/udev: removing device Logitech USB Receiver
[ 398.963] (II) Logitech USB Receiver: Close
[ 398.963] (II) UnloadModule: "evdev"
[ 398.963] (II) Unloading evdev
[ 398.986] (II) config/udev: removing device Logitech USB Receiver
[ 398.987] (II) Logitech USB Receiver: Close
[ 398.987] (II) UnloadModule: "evdev"
[ 398.987] (II) Unloading evdev
One more thing: on the m380 which is + or - working, is it possible to have the toolbar with the "File", "Edit", etc. options attached to each window rather than a global one?

Thanks,

Daniel