SirWatt
October 14th, 2011, 03:20 PM
I'm trying to set up Win 7 and Ubuntu on my hd, but so far I haven't had any luck with getting GRUB to show up. It just boots straight to Windows.
I've tried a couple of Ubuntu installs already. First, with a live-cd and using the option to automatically install Ubuntu side to side with Windows, second, manually partitioning and installing Ubuntu. Both times I got a fatal error saying that it failed to install the bootloader.
Then I made a live-usb, installed Ubuntu 2 more times (playing with different partition setups) and although I didn't get the fatal error this time around, it just booted straight to windows.
I did a little googling and found out about 'Boot Repair', but it didn't help.
I don't know pretty much anything about linux so I don't know what else to try now. :( I'll appreciate any help.
I am using an Asus P8P67 motherboard with UEFI and also 2 HDD set up in Raid 0.
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
=> Windows is installed in the MBR of /dev/mapper/isw_bgcbcjbja_HDD.
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 30824 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys
isw_bgcbcjbja_HDD1: __________________________________________________ __________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grldr /bootmgr /Boot/BCD /grldr
isw_bgcbcjbja_HDD2: __________________________________________________ __________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
isw_bgcbcjbja_HDD3: __________________________________________________ __________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
isw_bgcbcjbja_HDD4: __________________________________________________ __________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
isw_bgcbcjbja_HDD5: __________________________________________________ __________
File system: swap
Boot sector type: -
Boot sector info:
isw_bgcbcjbja_HDD6: __________________________________________________ __________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
Invalid MBR Signature found.
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 4051 MB, 4051697664 bytes
128 heads, 42 sectors/track, 1472 cylinders, total 7913472 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 984 7,913,471 7,912,488 c W95 FAT32 (LBA)
Drive: isw_bgcbcjbja_HDD __________________________________________________ ___________________
Disk /dev/mapper/isw_bgcbcjbja_HDD: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders, total 1953536512 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/mapper/isw_bgcbcjbja_HDD1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/mapper/isw_bgcbcjbja_HDD2 206,848 419,637,247 419,430,400 7 NTFS / exFAT / HPFS
/dev/mapper/isw_bgcbcjbja_HDD3 419,637,248 459,637,247 40,000,000 83 Linux
/dev/mapper/isw_bgcbcjbja_HDD4 459,637,758 1,953,535,487 1,493,897,730 5 Extended
/dev/mapper/isw_bgcbcjbja_HDD5 459,637,760 467,637,247 7,999,488 82 Linux swap / Solaris
/dev/mapper/isw_bgcbcjbja_HDD6 467,637,760 1,953,535,487 1,485,897,728 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/mapper/isw_bgcbcjbja_HDD1 94243F13243EF836 ntfs Sistema Reservado
/dev/mapper/isw_bgcbcjbja_HDD2 BC2C542B2C53DF48 ntfs
/dev/mapper/isw_bgcbcjbja_HDD3 3571794d-5da4-427b-b4c8-d471819a596c ext4
/dev/mapper/isw_bgcbcjbja_HDD5 705810c4-59d6-42a9-b78c-22cd05626ed1 swap
/dev/mapper/isw_bgcbcjbja_HDD6 16357409-4922-4d9a-b3ec-d4886be3a910 ext4
/dev/sda isw_raid_member
/dev/sdc1 11FE-263D vfat PENDRIVE
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
isw_bgcbcjbja_HDD
isw_bgcbcjbja_HDD1
isw_bgcbcjbja_HDD2
isw_bgcbcjbja_HDD3
isw_bgcbcjbja_HDD5
isw_bgcbcjbja_HDD6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=================== isw_bgcbcjbja_HDD1/grldr embedded menu: ====================
--------------------------------------------------------------------------------
?g\FD/z\ACJ\DEq\A6Y\E5bF\8C\A5I\C8_\BC\CA\FF\FE(\9F\92\ CDe\CC/J\82^\F02η\A6\D7\83u%#\93\C0N\E9\AFq\EE쮍\AA1
\E2\91\EE\E3\87\DD\D4<\ABv2V\B3\9CԟOi_\E7\92x\D3oT[\8BT\95gaɎ@\8D\A2 6G&j-T\99\946\F0\D2\F6\A5\F1\EA\C8gC7>F\FCD\B5\B7\DFv:\BE[\CE\EF0\EA\DDN".\9B\FBHBj˄\F7\B7[\92\88\8C\F6
\8C\91]`<
\FAW\84\E8\BE\CBq\91\83=\E8|\A3 6\E7 \9F\CD\F4\D 6'P\DA
--------------------------------------------------------------------------------
==================== isw_bgcbcjbja_HDD3/boot/grub/grub.cfg: ====================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod efi_gop
insmod efi_uga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=3571794d-5da4-427b-b4c8-d471819a596c ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=3571794d-5da4-427b-b4c8-d471819a596c ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/mapper/isw_bgcbcjbja_HDD1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root 94243F13243EF836
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
======================== isw_bgcbcjbja_HDD3/etc/fstab: =========================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mapper/isw_bgcbcjbja_HDD3 / ext4 errors=remount-ro 0 1
/dev/mapper/isw_bgcbcjbja_HDD6 /home ext4 defaults 0 2
/dev/mapper/isw_bgcbcjbja_HDD5 none swap sw 0 0
--------------------------------------------------------------------------------
============ isw_bgcbcjbja_HDD3: Location of files loaded by Grub: =============
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= initrd.img 1
= vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on isw_bgcbcjbja_HDD4
=============================== StdErr Messages: ===============================
boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
hexdump: /dev/mapper/isw_bgcbcjbja_HDD4: No such file or directory
hexdump: /dev/mapper/isw_bgcbcjbja_HDD4: No such file or directory
mdadm: No arrays found in config file or automatically
I've tried a couple of Ubuntu installs already. First, with a live-cd and using the option to automatically install Ubuntu side to side with Windows, second, manually partitioning and installing Ubuntu. Both times I got a fatal error saying that it failed to install the bootloader.
Then I made a live-usb, installed Ubuntu 2 more times (playing with different partition setups) and although I didn't get the fatal error this time around, it just booted straight to windows.
I did a little googling and found out about 'Boot Repair', but it didn't help.
I don't know pretty much anything about linux so I don't know what else to try now. :( I'll appreciate any help.
I am using an Asus P8P67 motherboard with UEFI and also 2 HDD set up in Raid 0.
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
=> Windows is installed in the MBR of /dev/mapper/isw_bgcbcjbja_HDD.
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 30824 of /dev/sdc1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys
isw_bgcbcjbja_HDD1: __________________________________________________ __________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /grldr /bootmgr /Boot/BCD /grldr
isw_bgcbcjbja_HDD2: __________________________________________________ __________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
isw_bgcbcjbja_HDD3: __________________________________________________ __________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
isw_bgcbcjbja_HDD4: __________________________________________________ __________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
isw_bgcbcjbja_HDD5: __________________________________________________ __________
File system: swap
Boot sector type: -
Boot sector info:
isw_bgcbcjbja_HDD6: __________________________________________________ __________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
Invalid MBR Signature found.
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 4051 MB, 4051697664 bytes
128 heads, 42 sectors/track, 1472 cylinders, total 7913472 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 984 7,913,471 7,912,488 c W95 FAT32 (LBA)
Drive: isw_bgcbcjbja_HDD __________________________________________________ ___________________
Disk /dev/mapper/isw_bgcbcjbja_HDD: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders, total 1953536512 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/mapper/isw_bgcbcjbja_HDD1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/mapper/isw_bgcbcjbja_HDD2 206,848 419,637,247 419,430,400 7 NTFS / exFAT / HPFS
/dev/mapper/isw_bgcbcjbja_HDD3 419,637,248 459,637,247 40,000,000 83 Linux
/dev/mapper/isw_bgcbcjbja_HDD4 459,637,758 1,953,535,487 1,493,897,730 5 Extended
/dev/mapper/isw_bgcbcjbja_HDD5 459,637,760 467,637,247 7,999,488 82 Linux swap / Solaris
/dev/mapper/isw_bgcbcjbja_HDD6 467,637,760 1,953,535,487 1,485,897,728 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/mapper/isw_bgcbcjbja_HDD1 94243F13243EF836 ntfs Sistema Reservado
/dev/mapper/isw_bgcbcjbja_HDD2 BC2C542B2C53DF48 ntfs
/dev/mapper/isw_bgcbcjbja_HDD3 3571794d-5da4-427b-b4c8-d471819a596c ext4
/dev/mapper/isw_bgcbcjbja_HDD5 705810c4-59d6-42a9-b78c-22cd05626ed1 swap
/dev/mapper/isw_bgcbcjbja_HDD6 16357409-4922-4d9a-b3ec-d4886be3a910 ext4
/dev/sda isw_raid_member
/dev/sdc1 11FE-263D vfat PENDRIVE
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
isw_bgcbcjbja_HDD
isw_bgcbcjbja_HDD1
isw_bgcbcjbja_HDD2
isw_bgcbcjbja_HDD3
isw_bgcbcjbja_HDD5
isw_bgcbcjbja_HDD6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdc1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=================== isw_bgcbcjbja_HDD1/grldr embedded menu: ====================
--------------------------------------------------------------------------------
?g\FD/z\ACJ\DEq\A6Y\E5bF\8C\A5I\C8_\BC\CA\FF\FE(\9F\92\ CDe\CC/J\82^\F02η\A6\D7\83u%#\93\C0N\E9\AFq\EE쮍\AA1
\E2\91\EE\E3\87\DD\D4<\ABv2V\B3\9CԟOi_\E7\92x\D3oT[\8BT\95gaɎ@\8D\A2 6G&j-T\99\946\F0\D2\F6\A5\F1\EA\C8gC7>F\FCD\B5\B7\DFv:\BE[\CE\EF0\EA\DDN".\9B\FBHBj˄\F7\B7[\92\88\8C\F6
\8C\91]`<
\FAW\84\E8\BE\CBq\91\83=\E8|\A3 6\E7 \9F\CD\F4\D 6'P\DA
--------------------------------------------------------------------------------
==================== isw_bgcbcjbja_HDD3/boot/grub/grub.cfg: ====================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod efi_gop
insmod efi_uga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=3571794d-5da4-427b-b4c8-d471819a596c ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-12-generic
}
menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
echo 'Loading Linux 3.0.0-12-generic ...'
linux /boot/vmlinuz-3.0.0-12-generic root=UUID=3571794d-5da4-427b-b4c8-d471819a596c ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.0.0-12-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd3,msdos3)'
search --no-floppy --fs-uuid --set=root 3571794d-5da4-427b-b4c8-d471819a596c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/mapper/isw_bgcbcjbja_HDD1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(hd3,msdos1)'
search --no-floppy --fs-uuid --set=root 94243F13243EF836
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
======================== isw_bgcbcjbja_HDD3/etc/fstab: =========================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/mapper/isw_bgcbcjbja_HDD3 / ext4 errors=remount-ro 0 1
/dev/mapper/isw_bgcbcjbja_HDD6 /home ext4 defaults 0 2
/dev/mapper/isw_bgcbcjbja_HDD5 none swap sw 0 0
--------------------------------------------------------------------------------
============ isw_bgcbcjbja_HDD3: Location of files loaded by Grub: =============
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-3.0.0-12-generic 1
= boot/vmlinuz-3.0.0-12-generic 1
= initrd.img 1
= vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on isw_bgcbcjbja_HDD4
=============================== StdErr Messages: ===============================
boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
hexdump: /dev/mapper/isw_bgcbcjbja_HDD4: No such file or directory
hexdump: /dev/mapper/isw_bgcbcjbja_HDD4: No such file or directory
mdadm: No arrays found in config file or automatically