PDA

View Full Version : Asus N13 WIreless Help



SauceJohnson
October 12th, 2011, 05:54 PM
I've been trying to get my Asus N13 adapter to work for a couple weeks now. I'm trying to get it to work on BT5. The BT5 forums are useless and takes months to get a forum post approved. I've already read the post on here of the guy who also had a problem with the Asus N13, but he ran into some other problems that don't help me. I know in the commands that I'm suppose to leave out "sudo". When I type in lsmod | grep -e rt2 -e rt3 and then lsusb, I can see the computer recognizes it. Another problem is, I'm a noob, and I can't install the rt3070 drive. I have the 2800 on the black list also. But I need this because I'm taking a whole class on Unix/Linux, but the only thing we've been doing are the basics; documents, scripts, etc.. Any help for once would be awesome. :D

josephmills
October 12th, 2011, 06:03 PM
HI there and welcome to Ubuntu forums :)

could we please see alittle more info about your machine please open terminal (ctrl+alt+t) then type in


lspci -nn
lsmod
lsusb
rfkill list all
cat /etc/modprobe.d/blacklist.conf
lshw -c network


thanks and welcome to ubuntu forums again

SauceJohnson
October 12th, 2011, 06:25 PM
Alright on the last command I got ..

root@bt:~# lshw -c network
*-network UNCLAIMED
description: Network controller
product: RTL8191SEvB Wireless LAN Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: ioport:7000(size=256) memory:d3100000-d3103fff
*-network
description: Ethernet interface
product: AR8152 v1.1 Fast Ethernet
vendor: Atheros Communications
physical id: 0
bus info: pci@0000:08:00.0
logical name: eth0
version: c1
serial: c8:0a:a9:a4:35:b4
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.107 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s
resources: irq:42 memory:d3000000-d303ffff ioport:6000(size=128)
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:3
logical name: wlan1
serial: f4:6d:04:b1:fc:29
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rt2800usb driverversion=2.6.38 firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn

josephmills
October 12th, 2011, 08:15 PM
um..... that is not all the commands that I asked for.... If you want help you might want to think about doing what the person is asking you to and not what you think is right. pretty hard for us to answer you when you wont answer us!

chili555
October 12th, 2011, 09:57 PM
Joseph--

Please see PM.