Darren_Thomas
October 1st, 2011, 01:02 PM
Hey all,
I have installed Ubuntu 11.04 along side an existing install of Windows XP.
The installation seemed to go fine and i didn't notice any errors being reported during the process.
When i restarted, my machine just boots directly into windows and i get no option for Ubuntu :(
As i am running multi HDD's, i think i need to fix the grub?
I have run the boot_info_script file (results below), but am unsure what commands to use next.
Thanks in advance
Darren
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 72bf6403-9bea-472f-988c-e629c787e43d root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdd.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sdc1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 15176 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the /multiboot
directory. The integrity check of the ADV area failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 488,392,064 488,392,002 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 156,280,319 156,280,257 7 NTFS / exFAT / HPFS
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 438,586,997 438,584,950 7 NTFS / exFAT / HPFS
/dev/sdc2 438,587,390 488,396,799 49,809,410 5 Extended
/dev/sdc5 438,587,392 481,056,767 42,469,376 83 Linux
/dev/sdc6 481,058,816 488,396,799 7,337,984 82 Linux swap / Solaris
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 1998 MB, 1998585856 bytes
255 heads, 63 sectors/track, 242 cylinders, total 3903488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 63 3,887,729 3,887,667 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2EF8F900F8F8C6DD ntfs External
/dev/sdb1 0E605A69605A5813 ntfs
/dev/sdc1 04CC5A65CC5A50D2 ntfs Storage
/dev/sdc5 72bf6403-9bea-472f-988c-e629c787e43d ext4
/dev/sdc6 66820c91-4f73-4f5d-afbc-7121236d4dbb swap
/dev/sdd1 11E3-3F27 vfat MULTIBOOT
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
================================ sdb1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /noexecute=optin
--------------------------------------------------------------------------------
=========================== sdc5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sdb1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sdb,msdos1)'
search --no-floppy --fs-uuid --set=root 0E605A69605A5813
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc5 during installation
UUID=72bf6403-9bea-472f-988c-e629c787e43d / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc6 during installation
UUID=66820c91-4f73-4f5d-afbc-7121236d4dbb none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdc5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
217.287330627 = 233.310494720 boot/grub/core.img 1
211.387454987 = 226.975551488 boot/grub/grub.cfg 1
210.447265625 = 225.966030848 boot/initrd.img-2.6.38-11-generic 2
211.013893127 = 226.574442496 boot/initrd.img-2.6.38-8-generic 2
210.201480865 = 225.702121472 boot/vmlinuz-2.6.38-11-generic 1
217.286022186 = 233.309089792 boot/vmlinuz-2.6.38-8-generic 1
210.447265625 = 225.966030848 initrd.img 2
211.013893127 = 226.574442496 initrd.img.old 2
210.201480865 = 225.702121472 vmlinuz 1
217.286022186 = 233.309089792 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 68 cd cf 7c 1d 00 ed 28 e0 7d c7 a3 e2 2c 84 94 |h..|...(.}...,..|
00000010 dc 26 48 d1 ba d0 51 85 06 8d 67 da b3 81 81 a9 |.&H...Q...g.....|
00000020 08 01 94 43 2c b2 b6 ee 06 a0 0d 03 40 a8 18 48 |...C,.......@..H|
00000030 18 c4 b4 e2 fb f3 64 94 e5 be c8 5f 38 81 0d 62 |......d...._8..b|
00000040 8d b6 1c 60 14 26 0d 0c 37 32 48 d0 0c 40 60 8c |...`.&..72H..@`.|
00000050 9e ae 6c 5e 26 06 6c e0 1e 40 19 93 1c 30 31 8f |..l^&.l..@...01.|
00000060 e2 b5 16 1a 37 7f 8f 3a f2 0e e6 5a 0c 30 01 e8 |....7..:...Z.0..|
00000070 16 24 b6 38 e8 34 b0 d7 e9 0c ee 4a ed f0 c3 b8 |.$.8.4.....J....|
00000080 98 07 60 5c 6b 9f bc 1a 4a 5a c3 80 ec 18 19 b3 |..`\k...JZ......|
00000090 84 f1 a1 f2 52 71 cb ba d0 8c 5b ee 84 6e 4a 48 |....Rq....[..nJH|
000000a0 a5 c5 81 41 88 08 e8 61 26 34 05 7a 33 6e cb 14 |...A...a&4.z3n..|
000000b0 7d b1 2b 8c e1 39 27 8a 9d 23 55 95 47 91 f9 9b |}.+..9'..#U.G...|
000000c0 d7 13 8c b2 ea 4a 85 a5 1e de 7b 8f b2 39 76 dd |.....J....{..9v.|
000000d0 db 91 4b 50 94 6e 2c f8 e0 02 c3 38 75 36 3d 22 |..KP.n,....8u6="|
000000e0 14 34 96 de 98 01 e8 92 38 ab c7 5d 43 0d 96 de |.4......8..]C...|
000000f0 46 c9 2a 19 1b f8 48 02 da 2f 7c b8 a6 5d db 55 |F.*...H../|..].U|
00000100 f4 f8 12 39 bf a6 e0 71 77 d1 ba 0c 00 76 4d c4 |...9...qw....vM.|
00000110 b6 25 08 f0 06 a8 42 39 fb 1a 06 e0 13 93 48 60 |.%....B9......H`|
00000120 37 c0 60 94 1a 59 0c a5 70 1b 02 27 fd 8e 70 24 |7.`..Y..p..'..p$|
00000130 2f c0 20 40 0e fe 1a 80 d2 61 29 2c 71 49 76 c4 |/. @.....a),qIv.|
00000140 18 98 18 18 a6 1a 30 70 f1 26 58 8b cc 00 7a 03 |......0p.&X...z.|
00000150 ae 51 30 06 24 c2 d2 71 4e 17 00 3d 00 7b b1 34 |.Q0.$..qN..=.{.4|
00000160 86 e5 29 01 b8 2c 5c c1 bc b4 23 1b cf 73 db 1c |..)..,\...#..s..|
00000170 b8 01 69 09 80 42 42 02 5c 99 9b e8 66 0d c3 50 |..i..BB.\...f..P|
00000180 e3 82 f1 16 41 6a e3 6d 86 18 80 28 4c 2c 30 86 |....Aj.m...(L,0.|
00000190 94 06 f0 2c 02 47 1d 00 2d 0c 4e 01 d0 0d 89 a9 |...,.G..-.N.....|
000001a0 29 c5 0a 80 16 94 03 a2 16 21 70 d0 18 96 31 03 |)........!p...1.|
000001b0 40 50 2d 8f 68 86 00 fc 0a 93 43 50 51 08 00 fe |@P-.h.....CPQ...|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 08 88 02 00 fe |................|
000001d0 ff ff 05 fe ff ff 02 08 88 02 00 00 70 00 00 00 |............p...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
no raid sets
=============================== StdErr Messages: ===============================
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: only one argument allowed for this option
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
unlzma: Decoder error
unlzma: Decoder error
boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: only one argument allowed for this option
I have installed Ubuntu 11.04 along side an existing install of Windows XP.
The installation seemed to go fine and i didn't notice any errors being reported during the process.
When i restarted, my machine just boots directly into windows and i get no option for Ubuntu :(
As i am running multi HDD's, i think i need to fix the grub?
I have run the boot_info_script file (results below), but am unsure what commands to use next.
Thanks in advance
Darren
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 72bf6403-9bea-472f-988c-e629c787e43d root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> Windows is installed in the MBR of /dev/sdb.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub on this drive.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdd.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sdc1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdc5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 15176 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the /multiboot
directory. The integrity check of the ADV area failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 488,392,064 488,392,002 7 NTFS / exFAT / HPFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 156,280,319 156,280,257 7 NTFS / exFAT / HPFS
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 2,048 438,586,997 438,584,950 7 NTFS / exFAT / HPFS
/dev/sdc2 438,587,390 488,396,799 49,809,410 5 Extended
/dev/sdc5 438,587,392 481,056,767 42,469,376 83 Linux
/dev/sdc6 481,058,816 488,396,799 7,337,984 82 Linux swap / Solaris
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 1998 MB, 1998585856 bytes
255 heads, 63 sectors/track, 242 cylinders, total 3903488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 63 3,887,729 3,887,667 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2EF8F900F8F8C6DD ntfs External
/dev/sdb1 0E605A69605A5813 ntfs
/dev/sdc1 04CC5A65CC5A50D2 ntfs Storage
/dev/sdc5 72bf6403-9bea-472f-988c-e629c787e43d ext4
/dev/sdc6 66820c91-4f73-4f5d-afbc-7121236d4dbb swap
/dev/sdd1 11E3-3F27 vfat MULTIBOOT
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
================================ sdb1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /noexecute=optin
--------------------------------------------------------------------------------
=========================== sdc5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
set locale_dir=($root)/boot/grub/locale
set lang=en_GB
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=72bf6403-9bea-472f-988c-e629c787e43d ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdc,msdos5)'
search --no-floppy --fs-uuid --set=root 72bf6403-9bea-472f-988c-e629c787e43d
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sdb1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sdb,msdos1)'
search --no-floppy --fs-uuid --set=root 0E605A69605A5813
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdc5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc5 during installation
UUID=72bf6403-9bea-472f-988c-e629c787e43d / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc6 during installation
UUID=66820c91-4f73-4f5d-afbc-7121236d4dbb none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdc5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
217.287330627 = 233.310494720 boot/grub/core.img 1
211.387454987 = 226.975551488 boot/grub/grub.cfg 1
210.447265625 = 225.966030848 boot/initrd.img-2.6.38-11-generic 2
211.013893127 = 226.574442496 boot/initrd.img-2.6.38-8-generic 2
210.201480865 = 225.702121472 boot/vmlinuz-2.6.38-11-generic 1
217.286022186 = 233.309089792 boot/vmlinuz-2.6.38-8-generic 1
210.447265625 = 225.966030848 initrd.img 2
211.013893127 = 226.574442496 initrd.img.old 2
210.201480865 = 225.702121472 vmlinuz 1
217.286022186 = 233.309089792 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sdc2
00000000 68 cd cf 7c 1d 00 ed 28 e0 7d c7 a3 e2 2c 84 94 |h..|...(.}...,..|
00000010 dc 26 48 d1 ba d0 51 85 06 8d 67 da b3 81 81 a9 |.&H...Q...g.....|
00000020 08 01 94 43 2c b2 b6 ee 06 a0 0d 03 40 a8 18 48 |...C,.......@..H|
00000030 18 c4 b4 e2 fb f3 64 94 e5 be c8 5f 38 81 0d 62 |......d...._8..b|
00000040 8d b6 1c 60 14 26 0d 0c 37 32 48 d0 0c 40 60 8c |...`.&..72H..@`.|
00000050 9e ae 6c 5e 26 06 6c e0 1e 40 19 93 1c 30 31 8f |..l^&.l..@...01.|
00000060 e2 b5 16 1a 37 7f 8f 3a f2 0e e6 5a 0c 30 01 e8 |....7..:...Z.0..|
00000070 16 24 b6 38 e8 34 b0 d7 e9 0c ee 4a ed f0 c3 b8 |.$.8.4.....J....|
00000080 98 07 60 5c 6b 9f bc 1a 4a 5a c3 80 ec 18 19 b3 |..`\k...JZ......|
00000090 84 f1 a1 f2 52 71 cb ba d0 8c 5b ee 84 6e 4a 48 |....Rq....[..nJH|
000000a0 a5 c5 81 41 88 08 e8 61 26 34 05 7a 33 6e cb 14 |...A...a&4.z3n..|
000000b0 7d b1 2b 8c e1 39 27 8a 9d 23 55 95 47 91 f9 9b |}.+..9'..#U.G...|
000000c0 d7 13 8c b2 ea 4a 85 a5 1e de 7b 8f b2 39 76 dd |.....J....{..9v.|
000000d0 db 91 4b 50 94 6e 2c f8 e0 02 c3 38 75 36 3d 22 |..KP.n,....8u6="|
000000e0 14 34 96 de 98 01 e8 92 38 ab c7 5d 43 0d 96 de |.4......8..]C...|
000000f0 46 c9 2a 19 1b f8 48 02 da 2f 7c b8 a6 5d db 55 |F.*...H../|..].U|
00000100 f4 f8 12 39 bf a6 e0 71 77 d1 ba 0c 00 76 4d c4 |...9...qw....vM.|
00000110 b6 25 08 f0 06 a8 42 39 fb 1a 06 e0 13 93 48 60 |.%....B9......H`|
00000120 37 c0 60 94 1a 59 0c a5 70 1b 02 27 fd 8e 70 24 |7.`..Y..p..'..p$|
00000130 2f c0 20 40 0e fe 1a 80 d2 61 29 2c 71 49 76 c4 |/. @.....a),qIv.|
00000140 18 98 18 18 a6 1a 30 70 f1 26 58 8b cc 00 7a 03 |......0p.&X...z.|
00000150 ae 51 30 06 24 c2 d2 71 4e 17 00 3d 00 7b b1 34 |.Q0.$..qN..=.{.4|
00000160 86 e5 29 01 b8 2c 5c c1 bc b4 23 1b cf 73 db 1c |..)..,\...#..s..|
00000170 b8 01 69 09 80 42 42 02 5c 99 9b e8 66 0d c3 50 |..i..BB.\...f..P|
00000180 e3 82 f1 16 41 6a e3 6d 86 18 80 28 4c 2c 30 86 |....Aj.m...(L,0.|
00000190 94 06 f0 2c 02 47 1d 00 2d 0c 4e 01 d0 0d 89 a9 |...,.G..-.N.....|
000001a0 29 c5 0a 80 16 94 03 a2 16 21 70 d0 18 96 31 03 |)........!p...1.|
000001b0 40 50 2d 8f 68 86 00 fc 0a 93 43 50 51 08 00 fe |@P-.h.....CPQ...|
000001c0 ff ff 83 fe ff ff 02 00 00 00 00 08 88 02 00 fe |................|
000001d0 ff ff 05 fe ff ff 02 08 88 02 00 00 70 00 00 00 |............p...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
no raid sets
=============================== StdErr Messages: ===============================
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: only one argument allowed for this option
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: no RAID set found
unlzma: Decoder error
unlzma: Decoder error
boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdc to RAID set "sil_aiagebahfhaj"
ERROR: only one argument allowed for this option