PDA

View Full Version : [SOLVED] Wireless not found: Nvidia MCP79 chipset



homemadev
July 30th, 2011, 09:59 PM
I'm dying here.. I can't find the wireless adapter on my brand new Giada nettop.

Machine: Giada N10U (slim)
Intel Atom 330
Nvidia Ion MCP79

I can't see anything like a wireliess card on lspci or lsusb.. I wonder if there's a trick I don't know about.. can you see it (below)? Also, iwconfig and ifconfig don't seem to help. I'm in Fedora 15 now, but I started with Ubuntu Natty, and I'll switch back as necessary.

I did manage to install the current Nvidia graphics drivers from the Nvidia website.. Not sure if that has any bearing on this problem. Everything else seems to be working pretty well.. XBMC etc..

Thanks for any help!


$ lspci -v
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 4f00 [size=256]

00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: 66MHz, fast devsel

00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 4900 [size=64]
I/O ports at 4d00 [size=64]
I/O ports at 4e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: 66MHz, fast devsel

00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fae80000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: nvidia
Kernel modules: nvidia

00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fae7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at fae7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fae7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
Subsystem: nVidia Corporation Device cb84
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Capabilities: <access denied>

00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 40
I/O ports at c080 [size=8]
I/O ports at c000 [size=4]
I/O ports at bc00 [size=8]
I/O ports at b880 [size=4]
I/O ports at b800 [size=16]
Memory at fae76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport

00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: faf00000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f7ffffff
Capabilities: <access denied>

00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f9f00000-00000000f9ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport

00:17.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport

00:18.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport

03:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device cb79
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f6000000 (64-bit, prefetchable) [size=32M]
I/O ports at dc00 [size=128]
[virtual] Expansion ROM at fafe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nouveau, nvidiafb

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 41
I/O ports at e800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Memory at f9ffc000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 005: ID 0cf2:6238 ENE Technology, Inc.
Bus 003 Device 002: ID 17ef:6008 Lenovo
Bus 003 Device 003: ID 046d:c529 Logitech, Inc.
Bus 002 Device 002: ID 08e4:0150 Pioneer Corp.
Bus 002 Device 003: ID 05e1:0100 Syntek Semiconductor Co., Ltd

$ iwconfig
lo no wireless extensions.

p35p1 no wireless extensions.

[fred@gbox ~]$
[fred@gbox ~]$
[fred@gbox ~]$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 b) TX bytes:240 (240.0 b)

p35p1 Link encap:Ethernet HWaddr 00:E0:4C:68:76:0B
inet addr:192.168.3.119 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe68:760b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:45248 errors:0 dropped:0 overruns:0 frame:0
TX packets:36708 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:59871552 (57.0 MiB) TX bytes:3539869 (3.3 MiB)
Interrupt:41 Base address:0x4000

$ uname -r
2.6.38.8-35.fc15.i686

chili555
July 30th, 2011, 10:58 PM
I know I'm gonna hate myself in the morning, but I love a mystery. Is this your device?
ID 05e1:0100 Syntek Semiconductor Co., LtdPlease see: http://www.stk.com.tw/product-01.asp?Product_Type=58

Is it an actual USB dongle or an internal device attached to a USB bus?

Also, I am interested in this:
$ ifconfig

p35p1 Link encap:Ethernet HWaddr 00:E0:4C:68:76:0B
inet addr:192.168.3.119 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe68:760b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1How are you connected to the internet?

homemadev
July 31st, 2011, 06:54 PM
Hey chili555, thanks for your response!

I'm not home.. Still going after a wedding. But to answer your question, I'm connected via wired internet. I wonder if--since my nettop is tiny--the ethernet and wifi devices are confused together...?

homemadev
July 31st, 2011, 07:04 PM
And the wifi adapter is internal. It may be connected to a usb internally but its not an external dongle.

chili555
July 31st, 2011, 07:29 PM
Which version are you running? The manufacturer has drivers for 10.04 and 10.10, but I have not yet found later.
cat /etc/lsb-releaseEnjoy the wedding!


ftp://3dsp.com.cn/Ubuntu/

homemadev
July 31st, 2011, 09:50 PM
I was in Fedora 15 in earlier posts (lspci and lsusb give the same results in Ubuntu and Fedora). Now I'm back in Ubuntu.. I'll give the same information again to double check..

EDIT: and I'm in natty..


ubuntu@ubuntu:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION="Ubuntu 11.04"

ubuntu@ubuntu:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:e0:4c:68:76:0b
inet addr:192.168.3.119 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe68:760b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1506 errors:0 dropped:0 overruns:0 frame:0
TX packets:1367 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1791724 (1.7 MB) TX bytes:221382 (221.3 KB)
Interrupt:40 Base address:0x6000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2316 (2.3 KB) TX bytes:2316 (2.3 KB)

ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 046d:c529 Logitech, Inc.
Bus 003 Device 002: ID 17ef:6008 Lenovo
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05e1:0100 Syntek Semiconductor Co., Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 0cf2:6238 ENE Technology, Inc.
Bus 001 Device 004: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1)
00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:17.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:18.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
03:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

chili555
July 31st, 2011, 10:15 PM
In the link I gave, it says the latest version is for Maverick 10.10. Maybe it will work. Please go to ftp://3dsp.com.cn/, click the Ubuntu link and get BlueW-2310U_2.5.2_101229_Ubuntu10.10_withouthotkey.tar.g z.

I have no idea what the significance of hotkey is. Is there a wifi/bluetooth hotkey on your netbook? Maybe you need withhotkey.

I suggest you download the package to your desktop. Right-click and select Extract Here. Open a terminal and do:
sudo apt-get install build-essential linux-headers-generic
cd Desktop/BlueW-2310U_2.5.2_101229_Ubuntu10.10_withouthotkey
sudo Install_3DSPUSB.shThen, according to the README, if all has gone well go to Applications -> 3DSP WiFi Radar. I'd assume you will see your network and connect.

If it installs its own version of Wifi Radar, it may conflict with Network Manager, but let's see how it goes before we amputate.

This is the first of these I've ever encountered, so we are on unplowed ground here. Post back any errors or warnings.

homemadev
July 31st, 2011, 10:22 PM
hmm.. any ideas? I suppose there is always ndiswrapper, right?


ubuntu@ubuntu:~/Downloads$ sudo apt-get install build-essential linux-headers-generic
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
linux-headers-generic is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
ubuntu@ubuntu:~/Downloads/BlueW-2310U_2.4.4_100823_Ubuntu10.04_withouthotkey$ chmod a+x Install_3DSPUSB.sh
ubuntu@ubuntu:~/Downloads/BlueW-2310U_2.4.4_100823_Ubuntu10.04_withouthotkey$ sudo ./Install_3DSPUSB.sh
* Checking user... [ Ok ]
* Verifying kernel... [Fail]
Notice: The kernel "2.6.38-8-generic" is NOT supported by this package.
Exit.

homemadev
July 31st, 2011, 10:26 PM
also, I just found this, which I can try..

http://ubuntuforums.org/showthread.php?t=1234213&page=2


success!

we know its a pcie card... problem is it thinks its a usb one.

download the usb minicard drivers, unpack it.
i had to edit the kernal number in the install shell script to match my kernal (the .17-generic) and also renamed the kernal dir in drivers to match

install

reboot

icon appears, (three green bars)
click co-exist

BT icon appears
click it and it asks you to enable it.
it works (paired with mouse and working)

to use the wifi you need to use the scanner app, not network manager (will try this tonight)


next steps
1. need to work out how to make card default to co-exist not unplugged
2. need to make bt default to on

chili555
July 31st, 2011, 10:33 PM
It looks like step 1 is to amend the Install script for your kernel version. Are you up to it and/or do you want my suggestion? Go to lines 135 et seq and change this:
case "${CURRENTKERNEL}" in
"2.6.35-22-generic"| "2.6.35-22-generic-pae" | "2.6.35-23-generic" | "2.6.35-23-generic-pae" |"2.6.35-24-generic" | "2.6.35-24-generic-pae")
${PRINTOK};;To this:
case "${CURRENTKERNEL}" in
"2.6.35-22-generic"| "2.6.35-22-generic-pae" | "2.6.35-23-generic" | "2.6.35-23-generic-pae" |"2.6.38-8-generic" | "2.6.35-24-generic-pae")
${PRINTOK};;Proofread, save and close. Rerun the script and cross your fingers.

homemadev
July 31st, 2011, 10:35 PM
I'm making some progress.. found this to edit so far.. pretty straightforward, but I'm bound to screw something up.. :)


case "${CURRENTKERNEL}" in
"2.6.32-21-generic"|"2.6.38-8-generic"|"2.6.32-21-generic-pae"|"2.6.32-22-generic"|"2.6.32-22-generic-pae"|"2.6.32-23-generic"|"2.6.32-23-generic-pae"|"2.6.32-24-generic"|"2.6.32-24-generic-pae")
${PRINTOK};;
* )
${PRINTFAIL}
handle_error "NOTSUPPORTKERNEL";;
esac

chili555
July 31st, 2011, 10:39 PM
I'm making some progress.. found this to edit so far.. pretty straightforward, but I'm bound to screw something up.. :)


case "${CURRENTKERNEL}" in
"2.6.32-21-generic"|"2.6.38-8-generic"|"2.6.32-21-generic-pae"|"2.6.32-22-generic"|"2.6.32-22-generic-pae"|"2.6.32-23-generic"|"2.6.32-23-generic-pae"|"2.6.32-24-generic"|"2.6.32-24-generic-pae")
${PRINTOK};;
* )
${PRINTFAIL}
handle_error "NOTSUPPORTKERNEL";;
esacSee my post above. It may or may not work.

homemadev
July 31st, 2011, 10:39 PM
hmm.. not completely sure which kernel to take.. what is "-pae" all about? My 1st guess is to take the most recent kernel, avoiding ones that say "pae" at the end...

options...


ubuntu@ubuntu:~/Downloads/BlueW-2310U_2.4.4_100823_Ubuntu10.04_withouthotkey/drivers$ ls
2.6.32-21-generic 2.6.32-22-generic-pae 2.6.32-24-generic
2.6.32-21-generic-pae 2.6.32-23-generic 2.6.32-24-generic-pae
2.6.32-22-generic 2.6.32-23-generic-pae

homemadev
July 31st, 2011, 10:43 PM
so far so good...


$ sudo ./Install_3DSPUSB.sh
* Checking user... [ Ok ]
* Verifying kernel... [ Ok ]
* Copying modules... [ Ok ]
* Installing utilities... [ Ok ]
* Installing 3dsp-wifi-radar... [ Ok ]
* Creating init script... [ Ok ]

homemadev
August 1st, 2011, 10:35 PM
So I have tried this in Ubuntu 10.04 and 11.04. In both cases, I was a little out of spec-- my kernel for 10.04 is 2.6.32-33-generic, while the latest supported kernel is 2.6.32-24-generic.

In both cases, I can start up the 3DSP card program and the 3DSP Wifi Radar, but I get the message, "No valid wireless device!" (see attached screenshot).. so it seems like a non starter.

Is there something I may need to disable?

Otherwise, it seems like I should try to get the supported kernel. I'm not sure how to do that, but I'll start looking.

Any other ideas?

Thanks for your help!

chili555
August 1st, 2011, 10:42 PM
my kernel for 10.04 is 2.6.32-33-generic, while the latest supported kernel is 2.6.32-24-generic.Can you go into Synaptic and search for and install -24? What does this tell us?
modinfo 3dspusbbus | grep 0100
dmesg | grep 3dspWe are looking for your device usb.id:
ID 05e1:0100 Syntek Semiconductor Co., Ltd

homemadev
August 1st, 2011, 10:51 PM
ok, downloading image for kernel -24... anything interesting in what's below?


$ dmesg | grep 3dsp
[ 782.686897] 3dspusbbus: disagrees about version of symbol module_layout
[ 782.703256] 3dspusbwlanpriv: disagrees about version of symbol module_layout
[ 782.716501] 3dspusbwlan: disagrees about version of symbol module_layout
[ 782.737321] 3dspusbbtpriv: disagrees about version of symbol module_layout
[ 782.754610] 3dspusbbt: disagrees about version of symbol module_layout




$ sudo modinfo 3dspusbbus | grep 0100
ERROR: modinfo: could not find module 3dspusbbus

chili555
August 1st, 2011, 11:07 PM
3dspusbbus: disagrees about version of symbol module_layoutIt tried to load and encountered an error, but now it claims to not have any such module! Wacky!
modinfo: could not find module 3dspusbbusI'd try to get the -24 kernel and install again...and pray...

chili555
August 1st, 2011, 11:13 PM
Here is some interesting news:
$ modinfo Desktop/Forum/homemadev/BlueW-2310U_2.5.2_101229_Ubuntu10.10_withouthotkey/drivers/2.6.35-24-generic/3dspusbwlan.ko | grep 0100
alias: usb:v05E1p0100d*dc*dsc*dp*ic*isc*ip*So, evidently, the module we want to install is 3dspusbwlan.ko.

homemadev
August 1st, 2011, 11:13 PM
OK! After a couple reboots, it is working. Thanks chili555!

(Also, I sent a note to 3DSP asking for new drivers...)

homemadev
August 1st, 2011, 11:27 PM
Now if only it would connect automatically when I boot up.. :)

In case you are interested, here's the new info:


$ lsmod | grep -i 3dsp
3dspusbbt 21577 2
3dspusbbtpriv 570556 1 3dspusbbt
3dspusbwlan 30583 0
3dspusbwlanpriv 301330 1 3dspusbwlan
3dspusbbus 9393 2 3dspusbbt,3dspusbwlan
bluetooth 49892 9 rfcomm,sco,bnep,l2cap,3dspusbbt
$ modinfo 3dspusbwlan
ERROR: modinfo: could not find module 3dspusbwlan
$ modinfo 3dspusbwlanpriv
ERROR: modinfo: could not find module 3dspusbwlanpriv
$ dmesg | grep 3dsp
[ 12.390646] 3dspusbwlanpriv: module license 'Proprietary' taints kernel.
[ 12.457822] 3dsp usb wlan device found:) intf 0, alt configs 1, endpoints 5
[ 12.457941] intf 1 is not 3dsp wlan interface
[ 18.176793] 3D[T:WMAIN:00249]load 3dspcode.bin
[ 23.724723] 3D[T:WMAIN:00249]load 3dspcode.bin

chili555
August 2nd, 2011, 12:09 AM
Awesome! Would you care to use the thread tools at the top and Mark Solved?

chili555
August 2nd, 2011, 12:11 AM
Now if only it would connect automatically when I boot up.. :)

What do you have to do to get it started? We can probably automate it.

homemadev
August 2nd, 2011, 12:18 AM
Well, it seems to get going with my defaults just find as follows (at bottom), so I'm adding that line following these instructions (immediately below). If that all makes sense to you, I'll mark this one SOLVED. :)

http://embraceubuntu.com/2005/09/07/adding-a-startup-script-to-be-run-at-bootup/


$ sudo 3dsp-wifi-radar
read file: /etc/wifi-radar/wifi-radar.conf
Initialzers: domian is US
starting dhcp thread...

starting scanning thread...

key_mgmt=NONE
auth_alg=OPEN

Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/twifiu0/00:21:c5:16:20:b1
Sending on LPF/twifiu0/00:21:c5:16:20:b1
Sending on Socket/fallback
DHCPDISCOVER on twifiu0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on twifiu0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on twifiu0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on twifiu0 to 255.255.255.255 port 67 interval 10
DHCPOFFER of 192.168.1.83 from 192.168.1.254
DHCPREQUEST of 192.168.1.83 on twifiu0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.83 from 192.168.1.254
bound to 192.168.1.83 -- renewal in 39725 seconds.

chili555
August 2nd, 2011, 12:32 AM
Post back if that doesn't work as expected. Thanks.

homemadev
August 2nd, 2011, 02:04 AM
Yeah.. that didn't work.. not sure if it may be a problem with privileges, since the command has to be run as root. help? How would you do it?

homemadev
August 2nd, 2011, 02:50 AM
ok, I found something that works..

http://ubuntuforums.org/showthread.php?t=1721841

all done, thanks again!

chili555
August 2nd, 2011, 02:59 AM
Glad it's working!