lm-sensors temp report AMD

[Drak3]

hey, i was wondering if any one knew if the separate bit at the bottom of this:


john@unimatrix434:~$ sensors
it8720-isa-0228
Adapter: ISA adapter
in0: +1.36 V (min = +0.00 V, max = +4.08 V)
in1: +1.50 V (min = +0.00 V, max = +4.08 V)
in2: +3.30 V (min = +0.00 V, max = +4.08 V)
in3: +2.99 V (min = +0.00 V, max = +4.08 V)
in4: +3.06 V (min = +0.00 V, max = +4.08 V)
in5: +3.06 V (min = +0.00 V, max = +4.08 V)
in6: +4.08 V (min = +0.00 V, max = +4.08 V)
in7: +2.16 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.10 V
fan1: 1007 RPM (min = 10 RPM)
fan2: 938 RPM (min = 10 RPM)
fan3: 0 RPM (min = 0 RPM)
fan5: 1333 RPM (min = 10 RPM)
temp1: +41.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +43.0°C (low = +127.0°C, high = +70.0°C) sensor = thermal diode
temp3: +51.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
cpu0_vid: +0.513 V

k10temp-pci-00c3
Adapter: PCI adapter
temp1: +39.0°C

is actually the cpu temp as reported my the CPU? that was the goal, obviously, but its showing one temp, not 6....

btw, i know in reality, if this is the cpu temp, its 15C hotter than reported. just running mprime and want to make sure i dont get too hot.