tuxor1337
July 22nd, 2011, 11:07 PM
Please note, that sdb is my usb-stick with FuduntuLiveDVD on it.
RESULTS.txt when run directly after succesful installation of Fuduntu:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for ?? on this drive.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Scientific Linux SL release 5.6
(Boron) Kernel on an
Boot files: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
sda3: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Fuduntu release 14 (Laughin)
Kernel on an ()
Boot files: /etc/fstab
sda6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.02 2010-07-21 ........>4..r>.........7@...0...~.s...~...f...M.f.f....f..0~....>2}.u......
Boot sector info: Syslinux looks at sector 1954000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 62.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 40.0 GB, 40007761920 bytes
255 heads, 63 sectors/track, 4864 cylinders, total 78140160 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 19,454,714 19,454,652 83 Linux
/dev/sda2 19,454,715 37,881,269 18,426,555 83 Linux
/dev/sda3 37,881,856 55,459,839 17,577,984 83 Linux
/dev/sda4 55,459,840 78,139,391 22,679,552 5 Extended
/dev/sda5 55,461,888 73,893,887 18,432,000 83 Linux
/dev/sda6 73,895,936 78,139,391 4,243,456 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 4051 MB, 4051697664 bytes
125 heads, 62 sectors/track, 1021 cylinders, total 7913472 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 7,912,749 7,912,688 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 DM_snapshot_cow
/dev/loop2 squashfs
/dev/loop3 f468a9a6-717d-4b1d-89c9-effefcb2a054 ext4 _Fuduntu-i386-Li
/dev/loop4 DM_snapshot_cow
/dev/mapper/live-osimg-min f468a9a6-717d-4b1d-89c9-effefcb2a054 ext4 _Fuduntu-i386-Li
/dev/mapper/live-rw f468a9a6-717d-4b1d-89c9-effefcb2a054 ext4 _Fuduntu-i386-Li
/dev/sda1 745b4cd1-9be7-4368-a0b3-b5589a2aab4a ext4
/dev/sda2 1fc15114-df0b-4af6-9f25-4ae03291c248 ext3
/dev/sda3 bde570cc-c96c-4745-8939-dd3a9655e884 ext4
/dev/sda5 65f49bac-af34-4177-8952-d6c5de3c33fb ext4 _Fuduntu-i386-Li
/dev/sda6 bbfd9391-9fc2-4a76-a0f2-238a9a0dde41 swap
/dev/sdb1 AE6B-8E4E vfat fuduntu
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
live-osimg-min
live-rw
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/mapper/live-rw / ext4 (rw,noatime)
/dev/sdb1 /mnt/live vfat (rw)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
set locale_dir=($root)/boot/grub/locale
set lang=de_DE
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-10-generic ...'
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-10-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
/dev/sda6 none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
6.497462749 = 6.976597504 boot/grub/core.img 1
2.416320324 = 2.594504192 boot/grub/grub.cfg 1
3.379455090 = 3.628662272 boot/initrd.img-2.6.38-10-generic 2
3.253886700 = 3.493834240 boot/initrd.img-2.6.38-8-generic 2
3.273776531 = 3.515190784 boot/vmlinuz-2.6.38-10-generic 1
0.635100842 = 0.681934336 boot/vmlinuz-2.6.38-8-generic 1
3.379455090 = 3.628662272 initrd.img 2
3.253886700 = 3.493834240 initrd.img.old 2
3.273776531 = 3.515190784 vmlinuz 1
0.635100842 = 0.681934336 vmlinuz.old 1
========================== sda2/boot/grub/grub.conf: ===========================
--------------------------------------------------------------------------------
# grub.conf generated by livecd-install
default=0
timeout=10
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
#hiddenmenu
title Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
title Elementary OS
root (hd0,2)
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
title Ubuntu
root (hd0,0)
kernel /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
title Ubuntu Chainload
root(hd0,0)
chainloader +1
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
/dev/hda2 / ext3 defaults 1 1
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/hda6 swap swap defaults,pri=1 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.878304958 = 18.122941952 boot/grub/grub.conf 1
16.878304958 = 18.122941952 boot/grub/menu.lst 1
16.854959011 = 18.097874432 boot/grub/stage2 2
16.802663326 = 18.041722368 boot/initrd-2.6.18-238.12.1.el5.img 2
16.780446529 = 18.017867264 boot/vmlinuz-2.6.18-238.12.1.el5 2
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-30-generic ...'
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.1-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.1-1.fc14.i686.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.3-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.3-1.fc14.i686.img
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation
UUID=bde570cc-c96c-4745-8939-dd3a9655e884 / ext4 errors=remount-ro 0 1
/dev/sda6 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.266391754 = 26.055839744 boot/grub/core.img 1
20.358802795 = 21.860098048 boot/grub/grub.cfg 1
19.356868744 = 20.784279552 boot/initrd.img-2.6.35-28-generic 2
19.444622040 = 20.878503936 boot/initrd.img-2.6.35-30-generic 3
24.493812561 = 26.300030976 boot/vmlinuz-2.6.35-28-generic 1
24.261329651 = 26.050404352 boot/vmlinuz-2.6.35-30-generic 1
19.444622040 = 20.878503936 initrd.img 3
19.356868744 = 20.784279552 initrd.img.old 2
24.261329651 = 26.050404352 vmlinuz 1
24.493812561 = 26.300030976 vmlinuz.old 1
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab
# Created by anaconda on Fri Jul 22 23:46:13 2011
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=65f49bac-af34-4177-8952-d6c5de3c33fb / ext4 defaults 1 1
UUID=bbfd9391-9fc2-4a76-a0f2-238a9a0dde41 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
29.200351715 = 31.353638912 boot/initramfs-2.6.39.1-1.fc14.i686.img 2
27.753578186 = 29.800177664 boot/initrd-plymouth.img 1
27.732833862 = 29.777903616 boot/vmlinuz-2.6.39.1-1.fc14.i686 1
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry0
menu label Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb
label ubnentry1
menu label Verify and Boot Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb check
label ubnentry2
menu label Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry3
menu label Boot (Basic Video)
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM xdriver=vesa nomodeset
label ubnentry4
menu label Verify and Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM check
label ubnentry5
menu label Boot from local drive
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux.cfg 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
RESULTS.txt after reboot to Elementary OS:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Scientific Linux SL release 5.6
(Boron) Kernel on an
Boot files: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
sda3: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Fuduntu release 14 (Laughin)
Kernel on an ()
Boot files: /etc/fstab
sda6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.02 2010-07-21 ........>4..r>.........7@...0...~.s...~...f...M.f.f....f..0~....>2}.u......
Boot sector info: Syslinux looks at sector 1954000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 62.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Platte /dev/sda: 40.0 GByte, 40007761920 Byte
255 Köpfe, 63 Sektoren/Spur, 4864 Zylinder, zusammen 78140160 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 19,454,714 19,454,652 83 Linux
/dev/sda2 19,454,715 37,881,269 18,426,555 83 Linux
/dev/sda3 37,881,856 55,459,839 17,577,984 83 Linux
/dev/sda4 55,459,840 78,139,391 22,679,552 5 Extended
/dev/sda5 55,461,888 73,893,887 18,432,000 83 Linux
/dev/sda6 73,895,936 78,139,391 4,243,456 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Platte /dev/sdb: 4051 MByte, 4051697664 Byte
125 Köpfe, 62 Sektoren/Spur, 1021 Zylinder, zusammen 7913472 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 7,912,749 7,912,688 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 745b4cd1-9be7-4368-a0b3-b5589a2aab4a ext4
/dev/sda2 1fc15114-df0b-4af6-9f25-4ae03291c248 ext3
/dev/sda3 bde570cc-c96c-4745-8939-dd3a9655e884 ext4
/dev/sda5 65f49bac-af34-4177-8952-d6c5de3c33fb ext4 _Fuduntu-i386-Li
/dev/sda6 bbfd9391-9fc2-4a76-a0f2-238a9a0dde41 swap
/dev/sdb1 AE6B-8E4E vfat fuduntu
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda3 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdb1 /media/fuduntu vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,showexec,flush)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
set locale_dir=($root)/boot/grub/locale
set lang=de_DE
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-10-generic ...'
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-10-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
/dev/sda6 none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
6.497462749 = 6.976597504 boot/grub/core.img 1
2.416320324 = 2.594504192 boot/grub/grub.cfg 1
3.379455090 = 3.628662272 boot/initrd.img-2.6.38-10-generic 2
3.253886700 = 3.493834240 boot/initrd.img-2.6.38-8-generic 2
3.273776531 = 3.515190784 boot/vmlinuz-2.6.38-10-generic 1
0.635100842 = 0.681934336 boot/vmlinuz-2.6.38-8-generic 1
3.379455090 = 3.628662272 initrd.img 2
3.253886700 = 3.493834240 initrd.img.old 2
3.273776531 = 3.515190784 vmlinuz 1
0.635100842 = 0.681934336 vmlinuz.old 1
========================== sda2/boot/grub/grub.conf: ===========================
--------------------------------------------------------------------------------
# grub.conf generated by livecd-install
default=0
timeout=10
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
#hiddenmenu
title Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
title Elementary OS
root (hd0,2)
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
title Ubuntu
root (hd0,0)
kernel /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
title Ubuntu Chainload
root(hd0,0)
chainloader +1
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
/dev/hda2 / ext3 defaults 1 1
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/hda6 swap swap defaults,pri=1 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.878304958 = 18.122941952 boot/grub/grub.conf 1
16.878304958 = 18.122941952 boot/grub/menu.lst 1
16.854959011 = 18.097874432 boot/grub/stage2 2
16.802663326 = 18.041722368 boot/initrd-2.6.18-238.12.1.el5.img 2
16.780446529 = 18.017867264 boot/vmlinuz-2.6.18-238.12.1.el5 2
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-30-generic ...'
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.1-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.1-1.fc14.i686.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.3-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.3-1.fc14.i686.img
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation
UUID=bde570cc-c96c-4745-8939-dd3a9655e884 / ext4 errors=remount-ro 0 1
/dev/sda6 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.266391754 = 26.055839744 boot/grub/core.img 1
20.358802795 = 21.860098048 boot/grub/grub.cfg 1
19.356868744 = 20.784279552 boot/initrd.img-2.6.35-28-generic 2
19.444622040 = 20.878503936 boot/initrd.img-2.6.35-30-generic 3
24.493812561 = 26.300030976 boot/vmlinuz-2.6.35-28-generic 1
24.261329651 = 26.050404352 boot/vmlinuz-2.6.35-30-generic 1
19.444622040 = 20.878503936 initrd.img 3
19.356868744 = 20.784279552 initrd.img.old 2
24.261329651 = 26.050404352 vmlinuz 1
24.493812561 = 26.300030976 vmlinuz.old 1
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab
# Created by anaconda on Fri Jul 22 23:46:13 2011
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=65f49bac-af34-4177-8952-d6c5de3c33fb / ext4 defaults 1 1
UUID=bbfd9391-9fc2-4a76-a0f2-238a9a0dde41 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
29.200351715 = 31.353638912 boot/initramfs-2.6.39.1-1.fc14.i686.img 2
27.753578186 = 29.800177664 boot/initrd-plymouth.img 1
27.732833862 = 29.777903616 boot/vmlinuz-2.6.39.1-1.fc14.i686 1
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry0
menu label Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb
label ubnentry1
menu label Verify and Boot Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb check
label ubnentry2
menu label Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry3
menu label Boot (Basic Video)
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM xdriver=vesa nomodeset
label ubnentry4
menu label Verify and Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM check
label ubnentry5
menu label Boot from local drive
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux.cfg 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
unlzma: Decoder error
And now the most interesting part! RESULTS.txt after first boot of Ubuntu:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Scientific Linux SL release 5.6
(Boron) Kernel on an
Boot files: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
sda3: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unbekannter Dateisystemtyp „“
sda6: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.02 2010-07-21 ........>4..r>.........7@...0...~.s...~...f...M.f.f....f..0~....>2}.u......
Boot sector info: Syslinux looks at sector 1954000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 62.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Platte /dev/sda: 40.0 GByte, 40007761920 Byte
255 Köpfe, 63 Sektoren/Spur, 4864 Zylinder, zusammen 78140160 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 19,454,714 19,454,652 83 Linux
/dev/sda2 19,454,715 37,881,269 18,426,555 83 Linux
/dev/sda3 37,881,856 55,459,839 17,577,984 83 Linux
/dev/sda4 55,459,840 78,139,391 22,679,552 5 Extended
/dev/sda5 55,461,888 73,893,887 18,432,000 83 Linux
/dev/sda6 73,895,936 78,139,391 4,243,456 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Platte /dev/sdb: 4051 MByte, 4051697664 Byte
125 Köpfe, 62 Sektoren/Spur, 1021 Zylinder, zusammen 7913472 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 7,912,749 7,912,688 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/mapper/cryptswap1 e6c88de2-6ad9-4745-bf72-fe8f7907f626 swap
/dev/sda1 745b4cd1-9be7-4368-a0b3-b5589a2aab4a ext4
/dev/sda2 1fc15114-df0b-4af6-9f25-4ae03291c248 ext3
/dev/sda3 bde570cc-c96c-4745-8939-dd3a9655e884 ext4
/dev/sda6 bbfd9391-9fc2-4a76-a0f2-238a9a0dde41 swap
/dev/sdb1 AE6B-8E4E vfat fuduntu
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
cryptswap1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdb1 /media/fuduntu vfat (rw)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
set locale_dir=($root)/boot/grub/locale
set lang=de_DE
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-10-generic ...'
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-10-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
/dev/sda6 none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
6.497462749 = 6.976597504 boot/grub/core.img 1
2.416320324 = 2.594504192 boot/grub/grub.cfg 1
3.379455090 = 3.628662272 boot/initrd.img-2.6.38-10-generic 2
3.253886700 = 3.493834240 boot/initrd.img-2.6.38-8-generic 2
3.273776531 = 3.515190784 boot/vmlinuz-2.6.38-10-generic 1
0.635100842 = 0.681934336 boot/vmlinuz-2.6.38-8-generic 1
3.379455090 = 3.628662272 initrd.img 2
3.253886700 = 3.493834240 initrd.img.old 2
3.273776531 = 3.515190784 vmlinuz 1
0.635100842 = 0.681934336 vmlinuz.old 1
========================== sda2/boot/grub/grub.conf: ===========================
--------------------------------------------------------------------------------
# grub.conf generated by livecd-install
default=0
timeout=10
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
#hiddenmenu
title Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
title Elementary OS
root (hd0,2)
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
title Ubuntu
root (hd0,0)
kernel /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
title Ubuntu Chainload
root(hd0,0)
chainloader +1
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
/dev/hda2 / ext3 defaults 1 1
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/hda6 swap swap defaults,pri=1 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.878304958 = 18.122941952 boot/grub/grub.conf 1
16.878304958 = 18.122941952 boot/grub/menu.lst 1
16.854959011 = 18.097874432 boot/grub/stage2 2
16.802663326 = 18.041722368 boot/initrd-2.6.18-238.12.1.el5.img 2
16.780446529 = 18.017867264 boot/vmlinuz-2.6.18-238.12.1.el5 2
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-30-generic ...'
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.1-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.1-1.fc14.i686.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.3-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.3-1.fc14.i686.img
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation
UUID=bde570cc-c96c-4745-8939-dd3a9655e884 / ext4 errors=remount-ro 0 1
/dev/sda6 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.266391754 = 26.055839744 boot/grub/core.img 1
20.358802795 = 21.860098048 boot/grub/grub.cfg 1
19.356868744 = 20.784279552 boot/initrd.img-2.6.35-28-generic 2
19.444622040 = 20.878503936 boot/initrd.img-2.6.35-30-generic 3
24.493812561 = 26.300030976 boot/vmlinuz-2.6.35-28-generic 1
24.261329651 = 26.050404352 boot/vmlinuz-2.6.35-30-generic 1
19.444622040 = 20.878503936 initrd.img 3
19.356868744 = 20.784279552 initrd.img.old 2
24.261329651 = 26.050404352 vmlinuz 1
24.493812561 = 26.300030976 vmlinuz.old 1
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry0
menu label Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb
label ubnentry1
menu label Verify and Boot Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb check
label ubnentry2
menu label Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry3
menu label Boot (Basic Video)
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM xdriver=vesa nomodeset
label ubnentry4
menu label Verify and Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM check
label ubnentry5
menu label Boot from local drive
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux.cfg 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
unlzma: Decoder error
Believe me: sda5 is completely broken after that. No way of fixing it! And I found nothing in dmesg that might explain this destructive behaviour of Natty. Ubuntu 10.10 (Elementary OS) is not that aggressive ;-)
tuxor1337
July 22nd, 2011, 11:21 PM
What I did now is: I removed the corrupt partition using gparted. After that, I booted Natty again. And now the SWAP-partition is also corrupt! Maybe Natty doesn't like the number 5 in sda5....... :
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ ________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Scientific Linux SL release 5.6
(Boron) Kernel on an
Boot files: /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab
sda3: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unbekannter Dateisystemtyp „“
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.02 2010-07-21 ........>4..r>.........7@...0...~.s...~...f...M.f.f....f..0~....>2}.u......
Boot sector info: Syslinux looks at sector 1954000 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 62.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Platte /dev/sda: 40.0 GByte, 40007761920 Byte
255 Köpfe, 63 Sektoren/Spur, 4864 Zylinder, zusammen 78140160 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 19,454,714 19,454,652 83 Linux
/dev/sda2 19,454,715 37,881,269 18,426,555 83 Linux
/dev/sda3 37,881,856 55,459,839 17,577,984 83 Linux
/dev/sda4 55,459,840 78,139,391 22,679,552 5 Extended
/dev/sda5 73,895,936 78,139,391 4,243,456 82 Linux swap / Solaris
Drive: sdb __________________________________________________ ___________________
Platte /dev/sdb: 4051 MByte, 4051697664 Byte
125 Köpfe, 62 Sektoren/Spur, 1021 Zylinder, zusammen 7913472 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 62 7,912,749 7,912,688 c W95 FAT32 (LBA)
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/mapper/cryptswap1 37a822a2-db07-4f88-b021-1d97ddf62b36 swap
/dev/sda1 745b4cd1-9be7-4368-a0b3-b5589a2aab4a ext4
/dev/sda2 1fc15114-df0b-4af6-9f25-4ae03291c248 ext3
/dev/sda3 bde570cc-c96c-4745-8939-dd3a9655e884 ext4
/dev/sdb1 AE6B-8E4E vfat fuduntu
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
control
cryptswap1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,errors=remount-ro,commit=0)
/dev/sdb1 /media/fuduntu_ vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,showexec,flush)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
set locale_dir=($root)/boot/grub/locale
set lang=de_DE
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-10-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-10-generic ...'
linux /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-10-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, mit Linux 2.6.38-8-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 745b4cd1-9be7-4368-a0b3-b5589a2aab4a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry "elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode) (on /dev/sda3)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos3)'
search --no-floppy --fs-uuid --set=root bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
/dev/sda6 none swap sw 0 0
#/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
6.497462749 = 6.976597504 boot/grub/core.img 1
2.416320324 = 2.594504192 boot/grub/grub.cfg 1
3.379455090 = 3.628662272 boot/initrd.img-2.6.38-10-generic 2
3.253886700 = 3.493834240 boot/initrd.img-2.6.38-8-generic 2
3.273776531 = 3.515190784 boot/vmlinuz-2.6.38-10-generic 1
0.635100842 = 0.681934336 boot/vmlinuz-2.6.38-8-generic 1
3.379455090 = 3.628662272 initrd.img 2
3.253886700 = 3.493834240 initrd.img.old 2
3.273776531 = 3.515190784 vmlinuz 1
0.635100842 = 0.681934336 vmlinuz.old 1
========================== sda2/boot/grub/grub.conf: ===========================
--------------------------------------------------------------------------------
# grub.conf generated by livecd-install
default=0
timeout=10
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
#hiddenmenu
title Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
title Elementary OS
root (hd0,2)
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
title Ubuntu
root (hd0,0)
kernel /boot/vmlinuz-2.6.38-10-generic root=UUID=745b4cd1-9be7-4368-a0b3-b5589a2aab4a ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-10-generic
title Ubuntu Chainload
root(hd0,0)
chainloader +1
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
/dev/hda2 / ext3 defaults 1 1
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/hda6 swap swap defaults,pri=1 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
16.878304958 = 18.122941952 boot/grub/grub.conf 1
16.878304958 = 18.122941952 boot/grub/menu.lst 1
16.854959011 = 18.097874432 boot/grub/stage2 2
16.802663326 = 18.041722368 boot/initrd-2.6.18-238.12.1.el5.img 2
16.780446529 = 18.017867264 boot/vmlinuz-2.6.18-238.12.1.el5 2
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
set locale_dir=($root)/boot/grub/locale
set lang=de
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-30-generic ...'
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'elementary-jupiter, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set bde570cc-c96c-4745-8939-dd3a9655e884
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=bde570cc-c96c-4745-8939-dd3a9655e884 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu, with Linux 2.6.38-8-generic (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Ubuntu, with Linux 2.6.38-8-generic (recovery mode) (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set de68c92b-b2de-4a37-a0d1-aecc53613bd1
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=de68c92b-b2de-4a37-a0d1-aecc53613bd1 ro single
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry "Scientific Linux SL release 5.6 (Boron) (2.6.18-238.12.1.el5) (on /dev/sda2)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 1fc15114-df0b-4af6-9f25-4ae03291c248
linux /boot/vmlinuz-2.6.18-238.12.1.el5 ro root=/dev/hda2
initrd /boot/initrd-2.6.18-238.12.1.el5.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.1-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.1-1.fc14.i686.img
}
menuentry "Fuduntu release 14 (Laughin) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set fef027a2-fc77-4bfc-bd2e-03c53e72c392
linux /boot/vmlinuz-2.6.39.3-1.fc14.i686 root=/dev/sda6
initrd /boot/initramfs-2.6.39.3-1.fc14.i686.img
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda3 during installation
UUID=bde570cc-c96c-4745-8939-dd3a9655e884 / ext4 errors=remount-ro 0 1
/dev/sda6 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.266391754 = 26.055839744 boot/grub/core.img 1
20.358802795 = 21.860098048 boot/grub/grub.cfg 1
19.356868744 = 20.784279552 boot/initrd.img-2.6.35-28-generic 2
19.444622040 = 20.878503936 boot/initrd.img-2.6.35-30-generic 3
24.493812561 = 26.300030976 boot/vmlinuz-2.6.35-28-generic 1
24.261329651 = 26.050404352 boot/vmlinuz-2.6.35-30-generic 1
19.444622040 = 20.878503936 initrd.img 3
19.356868744 = 20.784279552 initrd.img.old 2
24.261329651 = 26.050404352 vmlinuz 1
24.493812561 = 26.300030976 vmlinuz.old 1
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry0
menu label Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb
label ubnentry1
menu label Verify and Boot Fuduntu-i386-LiveDVD
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb check
label ubnentry2
menu label Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM
label ubnentry3
menu label Boot (Basic Video)
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM xdriver=vesa nomodeset
label ubnentry4
menu label Verify and Boot
kernel /EFI/boot/vmlinuz0
append initrd=/EFI/boot/initrd0.img root=UUID=AE6B-8E4E rootfstype=auto ro liveimg quiet rhgb quiet acpi_osi=Linux elevator=deadline rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM check
label ubnentry5
menu label Boot from local drive
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
?? = ?? syslinux.cfg 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
unlzma: Decoder error
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.