froff
June 27th, 2011, 09:45 PM
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 3 for (,msdos3)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Boot file info: Grub2 (v1.97-1.98) in the file /linux.bin looks at
sector 1 of the same hard drive for core.img, but
core.img can not be found at this location. Grub
Legacy (v) in the file /linux.bin.grub1_097.2011-06-19
looks at sector 404101263 of the same hard drive for
the stage2 file, but no stage2 files can be found at
this location. Grub Legacy (v) in the file
/linux.bin.old1 looks at sector 473122049 of the same
hard drive for the stage2 file, but no stage2 files
can be found at this location. Grub Legacy (v) in the
file /linux.bin.old2 looks at sector 481502433 of the
same hard drive for the stage2 file, but no stage2
files can be found at this location. Grub2
(v1.97-1.98) in the file /mbr_grub.bin looks at sector
1 of the same hard drive for core.img, but core.img
can not be found at this location.
Operating System: Windows XP
Boot files: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 63. But according to the info from fdisk,
sda5 starts at sector 81931563. "63" and "2048" are
quite common values for the starting sector of a
logical partition and they only need to be fixed when
you want to boot Windows from a logical partition.
Operating System:
Boot files:
sda6: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 63.
Operating System:
Boot files:
sda7: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________ ________________________
File system: ext3
Boot sector type: Grub Legacy
Boot sector info: Grub Legacy (v) is installed in the boot sector of
sda8 and looks at sector 404101263 of the same hard
drive for the stage2 file, but no stage2 files can be
found at this location.
Operating System: Ubuntu 10.10
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb3: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sdc1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 3.86 0x4c28ef39
Boot sector info: Syslinux looks at sector 565280 of /dev/sdc1 for its
second stage. According to the info in the boot
sector, sdc1 starts at sector 0. But according to the
info from fdisk, sdc1 starts at sector 1.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 251.0 GB, 251000193024 bytes
255 heads, 63 sectors/track, 30515 cylinders, total 490234752 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 81,931,499 81,931,437 7 NTFS / exFAT / HPFS
/dev/sda2 81,931,500 490,223,474 408,291,975 f W95 Extended (LBA)
/dev/sda5 81,931,563 90,317,429 8,385,867 b W95 FAT32
/dev/sda6 90,317,493 362,940,479 272,622,987 7 NTFS / exFAT / HPFS
/dev/sda7 483,315,588 490,223,474 6,907,887 82 Linux swap / Solaris
/dev/sda8 362,940,543 483,315,524 120,374,982 83 Linux
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 81,922,047 81,920,000 7 NTFS / exFAT / HPFS
/dev/sdb2 81,922,048 90,114,047 8,192,000 82 Linux swap / Solaris
/dev/sdb3 90,124,650 1,953,520,064 1,863,395,415 83 Linux
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 16.1 GB, 16053960192 bytes
255 heads, 63 sectors/track, 1951 cylinders, total 31355391 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 1 31,355,390 31,355,390 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 F6E8D3BCE8D37977 ntfs C
/dev/sda5 8452-D600 vfat D
/dev/sda6 7EA88F5BA88F10B7 ntfs E
/dev/sda7 74cb58db-ec5d-408b-9761-6955ef24a3d2 swap
/dev/sda8 415d9dc0-150c-404c-ba6f-704c40a71846 ext3
/dev/sdb1 3B0B3F1A340E6C4F ntfs
/dev/sdb2 aa86fbc8-2ad4-48a7-ae03-3b66e77e04f2 swap
/dev/sdb3 6a26581f-084b-42e4-89dc-71b464b6b29c ext4
/dev/sdc1 3CE3-1678 vfat SYSRESC
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /mnt/dysk_c fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 /mnt/dysk_d vfat (rw,iocharset=utf8,umask=000)
/dev/sda6 /mnt/dysk_e fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda8 / ext3 (rw,relatime,errors=remount-ro,commit=0)
/dev/sdb1 /media/3B0B3F1A340E6C4F fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
/dev/sdb3 /media/6a26581f-084b-42e4-89dc-71b464b6b29c ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdc1 /media/SYSRESC vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1001, shortname=mixed,dmask=0077,utf8=1,showexec,flush)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=5
default=C:\linux.bin
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
C:\linux.bin="Ubuntu Linux"
--------------------------------------------------------------------------------
=========================== sda8/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=415d9dc0-150c-404c-ba6f-704c40a71846
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Chainload into GRUB 2
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/grub/core.img
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title When you have verified GRUB 2 works, you can use this command to
root
title complete the upgrade: upgrade-from-grub-legacy
root
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title Ubuntu 10.10, kernel 2.6.35-28-generic
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
quiet
title Ubuntu 10.10, kernel 2.6.35-28-generic (recovery mode)
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
initrd /boot/initrd.img-2.6.35-28-generic
title Ubuntu 10.10, kernel 2.6.35-25-generic
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-25-generic
quiet
title Ubuntu 10.10, kernel 2.6.35-25-generic (recovery mode)
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
initrd /boot/initrd.img-2.6.35-25-generic
title Ubuntu 10.10, memtest86+
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
chainloader +1
--------------------------------------------------------------------------------
=========================== sda8/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
if loadfont /boot/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-25-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
echo 'Loading Linux 2.6.35-25-generic ...'
linux /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-25-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu Linux (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set f6e8d3bce8d37977
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda8/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda8 lub sdb8
# stary uudid przed resize: UUID=2d1108ce-6b4f-428f-8dfb-9664e87de82f
UUID=415d9dc0-150c-404c-ba6f-704c40a71846 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda7 lub sdb7
UUID=74cb58db-ec5d-408b-9761-6955ef24a3d2 none swap sw 0 0
/dev/scd0 /media/cdrom0 auto users,noauto 0 0
# /dev/sda1
UUID=F6E8D3BCE8D37977 /mnt/dysk_c ntfs-3g defaults,noauto 0 2
# /dev/sda5
# stary uuid przed resize: UUID=7C29-5990
UUID=8452-D600 /mnt/dysk_d vfat iocharset=utf8,umask=000 0 2
# /dev/sda6
# stary uuid przed resize: UUID=640C9AB40C9A812A
UUID=7EA88F5BA88F10B7 /mnt/dysk_e ntfs-3g defaults 0 2
# WD80, parycja 1
UUID=C2A0A165A0A160A1 /mnt/wd80 ntfs-3g rw,users,noauto 0 2
# samsung solid B2700
#UUID=3065-6539 /media/solid vfat rw,users,iocharset=utf8,umask=000,noauto 0 2
# sandisk 16GB
#UUID=3CE3-1678 /media/sandisk vfat rw,users,iocharset=utf8,umask=000,noauto 0 2
#adata ext3
#UUID=283746f9-574f-41bb-a26b-513a26d70788 /media/adata_ext3 ext3 rw,users,noauto 0 2
#adata fat32
#UUID=F3C3-8468 /media/adata_fat32 vfat rw,users,iocharset=utf8,umask=000 0 2
--------------------------------------------------------------------------------
=================== sda8: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
192.812285900 = 207.030615552 boot/grub/core.img 1
192.790168285 = 207.006866944 boot/grub/grub.cfg 1
192.790198803 = 207.006899712 boot/grub/menu.lst 1
192.839385509 = 207.059713536 boot/initrd.img-2.6.35-25-generic 29
193.173667431 = 207.418646016 boot/initrd.img-2.6.35-28-generic 32
206.873404980 = 222.128627200 boot/vmlinuz-2.6.35-25-generic 47
194.773803234 = 209.136778752 boot/vmlinuz-2.6.35-28-generic 4
193.173667431 = 207.418646016 initrd.img 32
192.839385509 = 207.059713536 initrd.img.old 29
194.773803234 = 209.136778752 vmlinuz 4
206.873404980 = 222.128627200 vmlinuz.old 47
=========================== sdb3/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=415d9dc0-150c-404c-ba6f-704c40a71846
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Chainload into GRUB 2
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/grub/core.img
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title When you have verified GRUB 2 works, you can use this command to
root
title complete the upgrade: upgrade-from-grub-legacy
root
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title Ubuntu 10.10, kernel 2.6.35-28-generic
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
quiet
title Ubuntu 10.10, kernel 2.6.35-28-generic (recovery mode)
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
initrd /boot/initrd.img-2.6.35-28-generic
title Ubuntu 10.10, kernel 2.6.35-25-generic
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-25-generic
quiet
title Ubuntu 10.10, kernel 2.6.35-25-generic (recovery mode)
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
initrd /boot/initrd.img-2.6.35-25-generic
title Ubuntu 10.10, memtest86+
uuid 415d9dc0-150c-404c-ba6f-704c40a71846
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
chainloader +1
--------------------------------------------------------------------------------
=========================== sdb3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
if loadfont /boot/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
echo 'Loading Linux 2.6.35-28-generic ...'
linux /boot/vmlinuz-2.6.35-28-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro quiet splash
initrd /boot/initrd.img-2.6.35-25-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
echo 'Loading Linux 2.6.35-25-generic ...'
linux /boot/vmlinuz-2.6.35-25-generic root=UUID=415d9dc0-150c-404c-ba6f-704c40a71846 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-25-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos8)'
search --no-floppy --fs-uuid --set 415d9dc0-150c-404c-ba6f-704c40a71846
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu Linux (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set f6e8d3bce8d37977
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# 3B0B3F1A340E6C4F ntfs na nowym hitachi
# aa86fbc8-2ad4-48a7-ae03-3b66e77e04f2 swap na nowym hitachi
# 6a26581f-084b-42e4-89dc-71b464b6b29c ext4 na nowym hitachi
UUID=6a26581f-084b-42e4-89dc-71b464b6b29c / ext4 relatime,errors=remount-ro 0 1
UUID=aa86fbc8-2ad4-48a7-ae03-3b66e77e04f2 none swap sw 0 0
# ext3 na starym:
UUID=415d9dc0-150c-404c-ba6f-704c40a71846 /mnt /old_ext3 ext3 defaults 0 2
/dev/scd0 /media/cdrom0 auto users,noauto 0 0
# /dev/sda1
UUID=F6E8D3BCE8D37977 /mnt/dysk_c ntfs-3g defaults,noauto 0 2
# /dev/sda5
# stary uuid przed resize: UUID=7C29-5990
UUID=8452-D600 /mnt/dysk_d vfat iocharset=utf8,umask=000 0 2
# /dev/sda6
# stary uuid przed resize: UUID=640C9AB40C9A812A
UUID=7EA88F5BA88F10B7 /mnt/dysk_e ntfs-3g defaults 0 2
# WD80, parycja 1
UUID=C2A0A165A0A160A1 /mnt/wd80 ntfs-3g rw,users,noauto 0 2
--------------------------------------------------------------------------------
=================== sdb3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
719.114758492 = 772.143592448 boot/grub/core.img 1
719.114789009 = 772.143625216 boot/grub/grub.cfg 1
719.114987373 = 772.143838208 boot/grub/menu.lst 1
43.115406990 = 46.294815744 boot/initrd.img-2.6.35-25-generic 2
43.125672340 = 46.305838080 boot/initrd.img-2.6.35-28-generic 1
719.110058784 = 772.138546176 boot/vmlinuz-2.6.35-25-generic 1
719.114106178 = 772.142892032 boot/vmlinuz-2.6.35-28-generic 1
43.125672340 = 46.305838080 initrd.img 1
43.115406990 = 46.294815744 initrd.img.old 2
719.114106178 = 772.142892032 vmlinuz 1
719.110058784 = 772.138546176 vmlinuz.old 1
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
UI vesamenu.c32
F2 f2images.msg
F3 f3params.msg
F4 f4arun.msg
F5 f5troubl.msg
F6 f6pxe.msg
F7 f7net.msg
PROMPT 0
TIMEOUT 900
ONTIMEOUT rescuecd_std
MENU DEFAULT rescuecd_std
MENU TABMSG Press <TAB> to edit options or <F2>,<F3>,<F4>,<F5>,<F6>,<F7> for help
MENU TITLE SYSTEM-RESCUE-CD 1.5.8 (www.sysresccd.org)
MENU ROWS 16
MENU TIMEOUTROW 22
MENU TABMSGROW 24
MENU CMDLINEROW 24
MENU HELPMSGROW 26
MENU WIDTH 78
MENU MARGIN 6
MENU BACKGROUND #c00090f0
MENU color title 1;31;40 #FFFF0000 #00000000 std
MENU color sel 7;37;40 #FF000000 #FFC0C0C0 all
MENU color unsel 37;44 #FF000000 #00000000 none
MENU color hotsel 1;7;37;40 #FF000000 #FFC0C0C0 all
MENU color tabmsg 1;31;40 #FFFFFF00 #00000000 std
MENU color help 1;31;40 #FFFFFFFF #00000000 none
LABEL rescuecd_std
MENU LABEL 1) SystemRescueCd: default boot options
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot standard 32bit kernel with default options (should always work)
You should use this entry if you don't know which one to use
ENDTEXT
LABEL rescuecd_docache
MENU LABEL 2) SystemRescueCd: all files cached to memory (docache)
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 docache
TEXT HELP
Boot standard 32bit kernel and run system from RAM (cdrom can be removed)
It requires 512 MB of memory to work and takes some time during the
boot process, but the cdrom can be removed and system will be faster.
ENDTEXT
LABEL rescuecd_791
MENU LABEL 3) SystemRescueCd: console in high resolution (framebuffer)
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791
TEXT HELP
Boot standard 32bit kernel with console in high resolution
This mode is useful only if you want to work in console mode
ENDTEXT
LABEL rescuecd_us
MENU LABEL 4) SystemRescueCd: do not ask for keyboard, use US keymap
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot standard 32bit kernel and use the keymap for american keyboards
This way it will not prompt for the keymap during the boot process
ENDTEXT
LABEL rescuecd_xorg
MENU LABEL 5) SystemRescueCd: directly start the graphical environment
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 dostartx
TEXT HELP
Boot standard 32bit kernel and start the XFCE graphical environment
directly. You can also get in this environment by typing "startx" from
the console.
ENDTEXT
LABEL rescue64_std
MENU LABEL 6) SystemRescueCd: 64bit kernel with default options
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot standard 64bit kernel with default options (should work on 64bit CPU)
A 64bit kernel is required if you want to execute 64bit programs or to
chroot to an existing 64bit Linux OS on the disk. It requires a 64bit CPU.
ENDTEXT
MENU SEPARATOR
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE A) Standard 32bit kernel (rescuecd) with more choice...
LABEL rescuecd_1
MENU LABEL 1. SystemRescueCd with default options
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot standard 32bit kernel with default options (should always work)
ENDTEXT
LABEL rescuecd_2
MENU LABEL 2. SystemRescueCd with all files cached to memory
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 docache
TEXT HELP
Boot standard 32bit kernel and run system from memory.
It requires 512 MB of memory to work and takes some time during the
boot process, but the cdrom can be removed and system will be faster.
ENDTEXT
LABEL rescuecd_3
MENU LABEL 3. SystemRescueCd with console in high resolution (1024x768)
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791
TEXT HELP
Boot standard 32bit kernel with console in high resolution
ENDTEXT
LABEL rescuecd_4
MENU LABEL 4. SystemRescueCd with the default graphical environment
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 dostartx
TEXT HELP
Boot standard 32bit kernel and start the XFCE graphical environment
directly. You can also get in this environment by typing "startx" from
the console.
ENDTEXT
LABEL rescuecd_5
MENU LABEL 5. SystemRescueCd with VESA based graphical environment
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 dostartx forcevesa
TEXT HELP
Boot standard 32bit kernel and use VESA based graphical environment
Try this if you have problems to get the default graphical environment
ENDTEXT
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE B) Standard 64bit kernel (rescue64) with more choice...
LABEL rescue64_1
MENU LABEL 1. SystemRescueCd with default options
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot standard 64bit kernel with default options (should always work)
ENDTEXT
LABEL rescue64_2
MENU LABEL 2. SystemRescueCd with all files cached to memory
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 docache
TEXT HELP
Boot standard 64bit kernel and run system from RAM (cdrom can be removed)
It requires 512 MB of memory to work and takes some time during the
boot process, but the cdrom can be removed and system will be faster.
ENDTEXT
LABEL rescue64_3
MENU LABEL 3. SystemRescueCd with console in high resolution (1024x768)
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791
TEXT HELP
Boot standard 64bit kernel with console in high resolution
ENDTEXT
LABEL rescue64_4
MENU LABEL 4. SystemRescueCd with the default graphical environment
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 dostartx
TEXT HELP
Boot standard 64bit kernel and start the XFCE graphical environment
directly. You can also get in this environment by typing "startx" from
the console.
ENDTEXT
LABEL rescue64_5
MENU LABEL 5. SystemRescueCd with VESA based graphical environment
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 dostartx forcevesa
TEXT HELP
Boot standard 64bit kernel and use VESA based graphical environment
Try this if you have problems to get the default graphical environment
ENDTEXT
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE C) Alternative 32bit kernel (altker32) with more choice...
LABEL altker32_1
MENU LABEL 1. SystemRescueCd with default options
LINUX altker32
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot alternative 32bit kernel with default options (should always work)
ENDTEXT
LABEL altker32_2
MENU LABEL 2. SystemRescueCd with all files cached to memory
LINUX altker32
INITRD initram.igz
APPEND setkmap=pl scandelay=5 docache
TEXT HELP
Boot alternative 32bit kernel and run system from memory.
It requires 512 MB of memory to work and takes some time during the
boot process, but the cdrom can be removed and system will be faster.
ENDTEXT
LABEL altker32_3
MENU LABEL 3. SystemRescueCd with console in high resolution (1024x768)
LINUX altker32
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791
TEXT HELP
Boot alternative 32bit kernel with console in high resolution
ENDTEXT
LABEL altker32_4
MENU LABEL 4. SystemRescueCd with the default graphical environment
LINUX altker32
INITRD initram.igz
APPEND setkmap=pl scandelay=5 dostartx
TEXT HELP
Boot alternative 32bit kernel and start the XFCE graphical environment
directly. You can also get in this environment by typing "startx" from
the console.
ENDTEXT
LABEL altker32_5
MENU LABEL 5. SystemRescueCd with VESA based graphical environment
LINUX altker32
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 dostartx forcevesa
TEXT HELP
Boot alternative 32bit kernel and use VESA based graphical environment
Try this if you have problems to get the default graphical environment
ENDTEXT
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE D) Alternative 64bit kernel (altker64) with more choice...
LABEL altker64_1
MENU LABEL 1. SystemRescueCd with default options
LINUX altker64
INITRD initram.igz
APPEND setkmap=pl scandelay=5
TEXT HELP
Boot alternative 64bit kernel with default options (should always work)
ENDTEXT
LABEL altker64_2
MENU LABEL 2. SystemRescueCd with all files cached to memory
LINUX altker64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 docache
TEXT HELP
Boot alternative 64bit kernel and run system from memory.
It requires 512 MB of memory to work and takes some time during the
boot process, but the cdrom can be removed and system will be faster.
ENDTEXT
LABEL altker64_3
MENU LABEL 3. SystemRescueCd with console in high resolution (1024x768)
LINUX altker64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791
TEXT HELP
Boot alternative 64bit kernel with console in high resolution
ENDTEXT
LABEL altker64_4
MENU LABEL 4. SystemRescueCd with the default graphical environment
LINUX altker64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 dostartx
TEXT HELP
Boot alternative 64bit kernel and start the XFCE graphical environment
directly. You can also get in this environment by typing "startx" from
the console.
ENDTEXT
LABEL altker64_5
MENU LABEL 5. SystemRescueCd with VESA based graphical environment
LINUX altker64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 dostartx forcevesa
TEXT HELP
Boot alternative 64bit kernel and use VESA based graphical environment
Try this if you have problems to get the default graphical environment
ENDTEXT
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE E) Boot an exising Linux OS installed on the disk...
LABEL linuxosdisk32
MENU LABEL Boot an exising 32bit Linux OS installed on the disk
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 root=auto
TEXT HELP
Detect partition where linux is installed and boot from it. You can use
this to boot Linux if your boot loader (eg: Grub) is broken or has been
removed by another OS. This will work if the Linux OS is 32bit.
ENDTEXT
LABEL linuxosdisk64
MENU LABEL Boot a 32bit or 64bit Linux OS installed on the disk
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 root=auto
TEXT HELP
Detect partition where linux is installed and boot from it. You can use
this to boot Linux if your boot loader (eg: Grub) is broken or has been
removed by another OS. This will work with both 32bit and 64bit Linux OS.
ENDTEXT
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU BEGIN
MENU TITLE F) Run system tools from floppy disk image...
LABEL memtest
MENU LABEL MEMTEST: Memory test using Memtest86+
kernel /bootdisk/memtestp
APPEND setkmap=pl -
TEXT HELP
Use this tool if you suspect your RAM from being damaged. Damaged memory can
explain crashes or unexpected bahaviors on stable operating systems.
ENDTEXT
LABEL ntpass
MENU LABEL NTPASSWD: Reset or edit Windows passwords
kernel /ntpasswd/vmlinuz
APPEND setkmap=pl rw vga=1 initrd=/ntpasswd/initrd.cgz,/ntpasswd/scsi.cgz
TEXT HELP
This tool can be used to reset windows users accounts. It works will all
windows user accounts including the administrator. You can use this tool if
you forgot the administrator's password.
ENDTEXT
LABEL freedos
MENU LABEL FREEDOS: Clone of the MSDOS Operating System
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/freedos.img floppy
TEXT HELP
FreeDOS can be used to execute DOS programs such as BIOS upgrade tools
ENDTEXT
LABEL netboot
MENU LABEL NETBOOT: Boot from the network
kernel netboot
APPEND setkmap=pl -
LABEL hdt
MENU LABEL HDT: recent hardware diagnostics tool
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/hdt.img floppy
TEXT HELP
This diagnostic tool will give you information about your hardware
ENDTEXT
LABEL ranish
MENU LABEL RANISH: Partition Manager tool
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/ranish.img floppy
LABEL aida
MENU LABEL AIDA: old hardware diagnostics tool
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/aida.img floppy
LABEL gag
MENU LABEL GAG: Graphical Boot Manager
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/gag.img floppy
LABEL dban
MENU LABEL DBAN: erase all data from the disk
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/dban.img floppy
LABEL mhdd
MENU LABEL MHDD: Low-level Hard Drive diagnostic tool
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/mhdd.img floppy
LABEL grubdisk
MENU LABEL SGD: Super Grub Disk
kernel memdisk
APPEND setkmap=pl initrd=/bootdisk/grubdisk.img floppy
MENU SEPARATOR
LABEL return
MENU LABEL Return to main menu
MENU EXIT
MENU END
# ------------------------------------------------------------------------------
MENU SEPARATOR
LABEL local1
MENU LABEL *) Boot from first hard disk
kernel chain.c32
APPEND setkmap=pl hd0
TEXT HELP
Boot local OS installed on first hard disk
ENDTEXT
LABEL local2
MENU LABEL *) Boot from second hard disk
kernel chain.c32
APPEND setkmap=pl hd1
TEXT HELP
Boot local OS installed on second hard disk
ENDTEXT
LABEL rescuecd
MENU HIDE
LINUX rescuecd
INITRD initram.igz
LABEL rescue64
MENU HIDE
LINUX rescue64
INITRD initram.igz
LABEL altker32
MENU HIDE
LINUX altker32
INITRD initram.igz
LABEL altker64
MENU HIDE
LINUX altker64
INITRD initram.igz
LABEL uk32
MENU HIDE
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5
LABEL uk64
MENU HIDE
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5
LABEL fd32
MENU HIDE
LINUX rescuecd
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 docache dostartx
LABEL fd64
MENU HIDE
LINUX rescue64
INITRD initram.igz
APPEND setkmap=pl scandelay=5 vga=791 docache dostartx
--------------------------------------------------------------------------------
================= sdc1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/ifcpu64.c32 1
?? = ?? syslinux/menu.c32 1
?? = ?? syslinux/reboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v3.xx)
syslinux/ifcpu64.c32 : COM32R module (v3.xx)
syslinux/menu.c32 : COM32R module (v3.xx)
syslinux/reboot.c32 : COM32R module (v3.xx)
syslinux/vesamenu.c32 : COM32R module (v3.xx)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.